Used Ksb Pump Etaline Gn G11 Inline Centrifugal Pump for sale (10,498)

Condition: good (used), KSB Etaline GN G11 centrifugal pump Inline centrifugal pump and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Credpfx Asiu U Txjdhsh Operating data Q up to, see data sheet H up to, see data sheet The data for this pump can be found in the data sheet. 1) The sum of the inlet pressure and the head at the zero flow point must not exceed the stated value. Design Block pump in inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 80 Nominal size suction/discharge nozzle 210 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN G11

Condition: good (used), KSB Etaline GN G10 Pump Inline pumps and three-phase standard motor with a motor-mounted frequency converter for stepless speed control. Applications: Heating systems Air conditioning systems Domestic water systems Water supply Cjdped Sqkzsfx Adhjrh Industrial circulation systems Fluid Liquids that do not chemically or mechanically attack the pump materials. Operating data Q 17.50 m3/h H 5.8 m Please refer to the data sheet for further information on this pump. 1) The sum of the inlet pressure and the delivery head at zero flow rate must not exceed the specified value. Design Block pump in inline design, with speed-controlled standard motor, pump and motor shaft are rigidly connected. Bearings Deep groove ball bearings, grease-lubricated. Shaft seal Uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/pressure nozzle: 160 Further technical data can be found in the data sheet. Item condition: used Scope of delivery: 1 x KSB Etaline GN G10 pump

Condition: good (used), KSB Etaline GN Pump Inline pumps and three-phase standard motor with a motor-mounted frequency inverter for stepless speed control. Crsdpfxsivd Dke Adhsh Applications: Heating systems Air conditioning systems Cooling circuits Domestic water systems Water supply Industrial circulation systems Medium: Liquids that do not chemically or mechanically attack the pump materials. Operating data: 1450 rpm Design: Block pump in an inline design, with a speed-controlled standard motor; the pump and motor shafts are rigidly connected. Bearings: Deep groove ball bearings, grease-lubricated. Shaft seal: Uncooled and maintenance-free mechanical seal according to EN 12 756. Drive: Surface-cooled three-phase standard motor with a motor-mounted frequency inverter and radio interference filter according to DIN EN. Pump series: Etaline Material combination: Gray cast iron Standard motor and stub shaft Frame size designation: 65 Nominal size of suction/discharge nozzle: 160 Item condition: used

Condition: excellent (used), For sale: a line pump from the renowned German manufacturer KSB, model ETALINE ETL 032-032-200, complete with Siemens motor. This unit is intended for use in industrial installations, heating and cooling systems, as well as water circuit applications. TECHNICAL DATA OF THE PUMP Manufacturer: KSB Model: ETALINE ETL 032-032-200 Flow rate: Q 4.0 m³/h Head: H 12 m Impeller diameter: 191 mm Rotational speed: 1459 rpm Year of manufacture: 2021 Flange connections MOTOR Manufacturer: Siemens Power: 0.55 kW Voltage: 400 V, 50 Hz Speed: approx. 1440 rpm Efficiency class: IE3 Design: ATEX Ex II 2G Protection: PTC CONDITION Very good condition Complete unit Minor visible signs of storage Technically fully functional APPLICATIONS Codpeywu Hasfx Adherh Industrial process installations HVAC systems Water and liquid circulation Manufacturing plants Explosion hazard zones

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Cjdpfx Adsq Tqnqohorh Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our store! International shipping costs on request!

Condition: new, For sale: high-quality centrifugal pump from renowned German manufacturer KSB, model ETALINE SYT ETL050-050-160, complete with electric motor. The unit is brand new, unused, stored as warehouse spare stock in its original transport crate. TECHNICAL DATA Manufacturer: KSB Model: ETALINE SYT ETL050-050-160 Pump type: Inline centrifugal pump Capacity Q: 40 m3/h Head H: 42 m Rotational speed: approx. 3493 rpm Impeller diameter: 153 mm Year of manufacture: 2020 Casing material: EN GJS 400 15 Flanged connections: DN50 MOTOR Manufacturer: WEG Power: 7.5 kW Supply voltage: 400 V Frequency: 50 Hz Speed: approx. 2900 rpm Efficiency class: IE3 Protection rating: IP55 CONDITION Crodpfx Aeywvnljdhsh New, unused Original transport crate Complete KSB documentation Possible minimal storage marks APPLICATIONS Industrial installations HVAC systems Heating and cooling installations Water and liquid circulation Pumping stations

Condition: used, Centrifugal Pump, Pump, KSB Etabloc-GN 50-200/1852, Used machine Manufacturer: KSB Type: KSB Etabloc-GN 50-200/1852 Year: 2003 Overall dimensions: Crodpfx Adey Nnnbohjh Width: 810 mm Depth: 350 mm Height: 400 mm Weight: 130 kg Electrical data: 400 V; 18.5 kW; 32.5 A Flow rate: 72 m³/h Head: 51 meters

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Flow rate / Head (Q/H): 38.7 m³/h / 84 m Cjdpfx Asy H Nbkodhsrh Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: ready for operation (used), Pump; KSB ETABLOC GNF 050-315 Centrifugal Pump, Used machine Manufacturer: KSB ETABLOC Type: GNF 050-315 Overall dimensions: Width: 510 mm Depth: 420 mm Height: 700 mm Weight: 55 kg Electrical data: 400 V; 1450 rpm Flow rate: 30 m³/h Head: 26 m Cedeyh D H Topfx Adhorh Year of manufacture: 2010

Condition: new, For sale: New KSB ETABLOC GN 65-125 centrifugal pump with Siemens 5.5 kW motor. The unit is from warehouse stock – excellent condition, unused. KSB ETABLOC series pumps are high-quality industrial pumps designed for water installations, heating and cooling systems, process installations, and general industrial applications. Robust construction and a reputable Siemens motor ensure high reliability and long service life. Pump technical data • Manufacturer: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Capacity: 18 – 136 m³/h • Head: 11 – 19.2 m • Rotational speed: 2900 rpm Motor • Manufacturer: Siemens • Model: 1LA7130-2AA66 • Power: 5.5 kW • Voltage: 400 / 690 V • Protection class: IP55 Crsdpfx Asyuqxredhsh • Housing: B35 The pump is equipped with flanged connections – ready for installation in your system.

Condition: like new (used), Year of construction: 1999, overall weight: 6,000 kg, volume flow: 300 m³/h, input frequency: 50 Hz, rotational speed (max.): 2,950 rpm, 11: Industrial pumps of the KSB brand 1 unused, 3 used KSB centrifugal pump + motor unit LUV h 150-340/2 Product information: Manufacturer: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture: 1968 Origin: Plant Frankenthal (Pfalz), Germany Condition: Used, but in good condition ⚙️ Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚡ Technical data – Motor: Voltage: 6000 V Current: 37.8 A Power: 300 kW Credpfswq Shbex Adhsh Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 Motor number: 2-151-134 874/1 📦 Description: This industrial high-performance pump from KSB is ideal for transporting large amounts of liquid. The pump is sold together with the matching motor unit. Manufactured to the solid German engineering standards of its time, known for durability and high performance. 2. Pump info: KSB centrifugal pump + motor unit Brand: KSB (Klein, Schanzlin & Becker AG) Model: LUv 5/2 F9 30-605 Year of manufacture of the pump: 1968 Origin: Plant Frankenthal (Pfalz), Germany 🔧 Technical data – Pump: Type: LUv 125/252/2 Flow rate (Q): 300 m³/h Delivery head (H): 210 m (mFLS) Speed: 2950 rpm Serial number (A-No): 2-151-134 874/2 ⚙️ Technical data – Motor: Type: LUv 5/2 F9 30-605 Motor No: 2-151-134 874/2 Voltage: 6000 V Current: 37.8 A Power: 300 kW Frequency: 50 Hz Speed: 2950 rpm Cos φ: 0.87 📌 Condition: Used, but in good condition. Stored after disassembly from an industrial plant. Technical data has been verified based on the nameplate.

Year of construction: 2014, condition: new, Flowserve DURCO Mark 3 ISO Centrifugal Process Pump – Complete Unit For sale: 2x Flowserve DURCO Mark 3 ISO centrifugal process pumps, complete with WEG electric motor and Flowserve mechanical seal support system. Crodpfjz A Avhjx Adhjh Pump specifications: Manufacturer: Flowserve / DURCO Series: Mark 3 ISO Model: 3K125-80-315RV Equipment No.: P-401 A Design pressure: 16 barg Design temperature: 70°C Material: Ductile Iron / EN-GJS-400-15 Year of manufacture: 2014 Manufactured in Newark, Nottingham, England Electric motor: Manufacturer: WEG Power: 11 kW Frequency: 50 / 60 Hz Speed: approx. 1465 rpm at 50 Hz Protection class: IP55 Efficiency class: IE3 Ex-rated motor Flowserve seal support system: Flowserve seal reservoir Barrier fluid system ASME VIII Div. 1 Year built: 2013 Complete pump unit mounted on a common steel base frame. Condition: Surplus industrial equipment Quantity available: 2 units Availability: Immediately available Location: Rotterdam, The Netherlands Worldwide shipping can be arranged.

Condition: new, Centrifugal pump Manufacturer: KSB Type: Etabloc-GN 50-125/302 Crsdpohtlmnsfx Adheh GN11 Capacity: 50 m3/h 2900 rpm Lifting height: 13 m Weight: 62kg It is complete - with motor!

Condition: used, Year of construction: 1999, operating hours: 105,000 h, functionality: fully functional, overall weight: 741 kg, total length: 1,940 mm, total width: 870 mm, total height: 1,300 mm, volume flow: 425 m³/h, operating pressure: 1 bar, final pressure: 1 bar, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 970 rpm, protection type (IP code): IP55, KSB KWP K 200-320 Pump Set, 18.5 kW – Complete Set, Documented 8 × KSB Centrifugal Pump KWP K 200-320 – Complete Industrial Unit, incl. Drive For sale are 8 identical, well-maintained industrial pump units from the renowned KSB KWP K 200-320 series. The units originate from a special order (KSB Pegnitz, order from 1999/2000) and were accepted and tested according to DIN 1944/III with customer acceptance. Sale of used KSB pump units (year of manufacture 1999, relatively low operating time of approx. 105,000 hours per unit) in as-is condition, without warranty or guarantee. Units have been dismantled; functional tests are possible upon request (without assurance of characteristics). Reference operation with identical units available. Sale preferably in packages; further units potentially available in the future (11 additional units). Spare parts and service obligations are excluded! Pump – KSB KWP K 200-320 Manufacturer KSB Aktiengesellschaft, Pegnitz Type / Series KWP K 200-320 (Impeller pump, radially split volute casing pump) Works No. 5-N01-541905 (Serial numbers on request) Flow rate Q 425 m³/h (118 l/s) Head H 10.25 m Min. Flow Rate 89.9 m³/h Speed 970 rpm (constant) Pump power 14.7 kW Motor power 18.5 kW Efficiency 80.8% NPSH 2.20 m Operating pressure max. 10 bar Suction nozzle DN 200, axial Discharge nozzle DN 200, upwards Flange DIN 2532 PN 10 Impeller diameter 320 mm (Re-machining form A15, 3-blade) Bearing carrier P05AX Shaft seal Tandem-GLRD (non-pressurized quench), Type 4K M3 Materials Pump casing / Pressure cover / Impeller 9.4460 (stainless, abrasion-resistant) Shaft sleeve 1.4539 GLRD cover 1.4571 Shaft C 45 N Base plate GG (gray cast iron) Drive & Peripherals per Unit Electric motor VEM, IP55, IEC size 200L, 18.5 kW, 970 rpm, B3, 50 Hz, 400/690 V, Insulation F, 3 PT100 sensors Coupling Flender Eupex N-H / Size 140, Intermediate sleeve 180 mm Base plate ZN 24259-G-ISO, Size 9G, GG, 4×M24×320 stud bolts Quench tank incl. piping 1.4571, without fittings Coupling guard Steel Weights per Unit Pump 350 kg Motor 175 kg Base plate 200 kg Crodjzp U Tuepfx Adhsh Coupling + guard 16 kg Total 741 kg Available Documentation (per unit) • Acceptance / Test report of the initial commissioning EN 10204 / DIN 1944 Class III (5 measuring points) • Q-H curves (Curve No. K 95231) • Installation plan / Dimension table with nozzle connections • Installation drawing of the mechanical seal (Drawing No. 0W244223) • Piping plan quench tank • Operating and maintenance instructions Application area / Application notes The KWP K series is a proven process centrifugal pump for: • Wastewater treatment and sewage treatment plant process technology • Biogas plants and fermentation substrate conveying • Sugar factories, paper mills, food production • Biotechnological processes (algae suspensions, fermentation) • Cooling water circuits and process water conveying in the chemical industry Further important (sales) information can be found in the attached documents.

Condition: used, Vertical multistage high-pressure centrifugal pump KSB Type Movichrom N CN 3/10 2R Serial no. 1-P30-837561 Nominal flow rate max. 3 m3/h Nominal delivery head 70 meters = 7 bar Nominal speed 2900 rpm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz - Pump construction in 10 stages - Pump elements made of stainless steel, pump base made of cast iron - Connection flanges DN 32 - Suitable for drinking water supply, irrigation and drainage Space required for pump L x W x H 250 x 220 x 830 mm Weight 38 kg Unused replacement pump from stock, as good as new Not a submersible pump or submersible pump Codperl U S Ejfx Adhsrh

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with seal flush connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm Crjdpfoibwarjx Adhoh ! Price per unit!

Year of construction: 2024, condition: used, Audoli & Bertola / Gruppo Aturia VHL 382/2 Industrial Vertical Pump with ABB 110 kW Motor Heavy-duty industrial vertical pump manufactured by Audoli & Bertola, a division of Gruppo Aturia S.p.A., complete with a large ABB electric motor. Crodpfx Asz Di Nwjdhoh The pump's nameplate indicates a manufacturing date of 11/2024. Pump specifications: Manufacturer: Audoli & Bertola Division: Gruppo Aturia S.p.A. Type: VHL 382/2 Capacity: 317 m³/h Head: 28 m Speed: 1450 rpm Power: 110 kW Year: 11/2024 CE marked Configuration: Vertical industrial pump Large flanged connections ABB electric motor: Manufacturer: ABB Type: M3BP 315SMA 4 V1 Power: 110 kW Year: 2003 Frequency: 50 Hz Speed: approx. 1486–1488 rpm Protection class: IP55 Insulation class: F Duty: S1 Product code: 3GBP312210-BDG Vertical mounting configuration The pump is offered as a complete assembly with the ABB 110 kW electric motor, as shown in the pictures. Condition: Used industrial surplus Location: Rotterdam, The Netherlands The equipment is available from stock and can be inspected before purchase. This equipment is industrial surplus and is sold as-is, without warranty or claims. Please contact us for further information or to submit an offer.

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 2012 Mat.-No.: 01216137 Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% Cjdpfezvyinox Adhorh cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multi-stage centrifugal pump with opposing suction and discharge nozzles (inline design). The pump components in contact with the medium are made of high-quality stainless steel. Cjdjwbfigspfx Adhsrh The cartridge seal ensures high reliability and ease of maintenance. Power transmission is via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer's product group: Vertical centrifugal pumps Manufacturer's product range: Vertical centrifugal pump CRN Manufacturer's article number: 96122358 Connection, inlet side: Flange Connection, outlet side: Flange Connection standard, inlet side: EN 1092-2 Nominal diameter, connection, outlet side: DN 65 Design: Vertical Speed: 2924 rpm Motor output power: 11.0 kW Protection class: IP55 Max. head: 90.2 m Max. operating pressure: 16 bar Weight: 193.2 kg List price: €14,844.00 You can find more items in other sizes - new and used - in our shop! International shipping costs available upon request!

Condition: good (used), Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump, booster pump, booster pump -Manufacturer: KSB, inline pump MOVI -V 25/1Drive: 0.55 kW -Speed: 2840 rpm -max. delivery rate: m³/h Cjdpfxjf S Ncpo Adherh -max. head: 39-24 m -Dimensions: 185/185/H555 mm -Weight: 22 kg

Condition: new, For sale: Professional industrial pump from the renowned manufacturer KSB. The pump is in new condition (ex-stock/warehouse storage) – unused, with possible storage marks visible in the photos. ⚠️ Sale concerns the pump only – electric motor not included. Credpeywcq Tjfx Adhjh ⚙️ TECHNICAL DATA Manufacturer: KSB Model: ETACHROM BC 80-250 / 1104 Year of manufacture: 2000 Capacity: up to approx. 160 m³/h Head: approx. H-14 Type: centrifugal pump Construction: single-stage Connections: flanged Design: industrial, heavy-duty 🔧 APPLICATIONS Water installations Industry Process systems Cooling Liquid circuits ✅ CONDITION New – stock item Unused Fully operational construction No motor included 📦 ADDITIONAL INFORMATION ➡️ Option to purchase an electric motor ➡️ Matching motor available – additional cost: €700

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Crjdpsy Udbuefx Adheh Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: excellent (used), For sale: a KSB ETABLOC-GN 65-160/1102.21 centrifugal pump, equipped with an 11 kW electric motor. The pump is used and in working order. It is in good technical condition and shows normal signs of use and storage. The exact visual condition can be seen in the photos. Pump technical specifications: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 65-160/1102.21 Design: GN11 Ident-No.: 48861861 No.: 5-925-204038 / 1 Flow rate Q: 18–143 m³/h Head H: 35.5–22 m Credpfezvyuqsx Adheh Rotational speed: 2900 rpm Motor technical specifications (50 Hz): Manufacturer: KSB Power: 11 kW Voltage: 380–660 / 420 V Current: 20.8–12.0 / 19.0 A Rotational speed: 2900 rpm cos φ: 0.92 Protection class: IP55 Insulation class: F Motor weight: approx. 79 kg Condition: Used, in working order. Normal signs of wear and tear resulting from previous use and the age of the equipment. Scope of sale: KSB ETABLOC-GN pump with electric motor – exactly as shown in the photos, in the presented condition and configuration.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Csdpfxezvzu Eo Adhjrh Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Codezvhq Hjpfx Adhorh Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89