Used Kraussmaffei Krauss Maffei Km650-4300 Gx (2013) for sale (2,811)

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function Fedpfx Aajy Apdqs Isgh \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: used, Year of construction: 2013, operating hours: 29,000 h, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Fodpfxjppigdj Aa Iogh Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Fsdpfx Aaezvm Dlj Isgh Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: ready for operation (used), Year of construction: 2010, operating hours: 43,000 h, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1510 x 1370 mm Distance between tie bars (h x v) 1000 x 930 mm Mould opening stroke 1150 mm Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 95 / 48 kN Injection unit: Screw diameter 80 mm Ls/D ratio 22,5 Injection pressure 2205 bar Stroke volume 1810 ccm Shot weight (PS) 1647 gr. Injection rate 498 ccm/s Screw speed 195 1/min Plasticising rate max. 106 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Fedoz N E Eyjpfx Aa Iogh Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 8,50 x 3,00 x 2,70 m Total machine weight 35000 kg Accessories: - Anti vibration pads - 10-fold water regulator - Krauss Maffei Robot LRX250 X: 900 mm Servo Y: 1000/1000 mm Servo Z: 3500 mm Servo C: 0 - 90 ° Additional Options: - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Robot interface according to Euromap 67 - 6 x hydraulic sequentional valves - 12 x hotrunner controller - 1 x Air valve

Condition: used, Year of construction: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Fedsw Hwthjpfx Aa Iogh

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Fodpfxezvm E Ae Aa Isgh Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Fjdpfx Aozvm T Toa Iogh Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2014, KRAUSS-MAFFEI KM 420-4300 CX injection molding machine Year of manufacture: 2014 Control system: MC6 Plasticizing unit: 4300 Screw diameter: 90 mm Control system MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlight, and visualization of all running processes via ProcessDesigner. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion-resistant design. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Nozzle radius: 15 mm Nozzle orifice: 6 mm Clamping unit Clamping force: 4200 kN / 420 t Maximum mold opening force: 250 kN Dimensions of mounting plates (H × V): 1270 × 1230 mm Distance between columns (H × V): 800 × 800 mm Maximum mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum distance between plates: 1400 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Standard injection rate: 604 cm³/s Injection rate with accumulator: 1909 cm³/s Standard screw speed: 195 rpm PS plasticizing rate at standard speed: 134 g/s PS plasticizing rate at increased speed: 186 g/s Nozzle clamping force: 129 kN Electrical and hydraulic system Rated power of pump motor: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 560 mm Oil tank capacity: 1000 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.5 × 2.4 m Net weight including control cabinet: 25.5 t Fodpfjzvmx Nsx Aa Ijgh

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036721, clamping force: 6,500 kN, screw diameter: 70 mm, clearance between the columns: 1,110 mm, displacement volume: 1,078 cm³, injection pressure: 1,877 bar, injection weight: 981 g, opening stroke: 3,200 mm, plate height: 1,540 mm, drive type: Hydraulisch, clear span: 3,200 mm, tool weight: 2,200,000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX sliding shoe, forces are ideally absorbed and the service life of the moulds is extended. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24'' TFT color screen with multitouch functions CLAMPING UNIT - Clamping force: 6500 kN - Max. mould opening force: 455 kN - Daylight opening (h x v): 1110 x 960 mm - Platen size (h x v): 1540 x 1440 mm - Mould installation height min. - max.: 1550 mm (without centre platen) - Opening stroke: 3200 mm - Max. mould opening distance: 1650 mm - Max. mould weight: 22,000 kg INJECTION UNIT 1 SP2000 - Screw diameter / type: 60 mm / thermoplastics - Effective L/D ratio: 23.3 - Injection pressure: 2420 bar - Shot volume: 792 cm³ - Shot weight at max. stroke for PS: 720 g - Injection speed: 140 mm/s - Injection throughput: 396 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 72.2 g/s - Nozzle contact force: 82 kN INJECTION UNIT 2 SP2000 - Screw diameter / type: 70 mm / thermoplastics - Effective L/D ratio: 20 - Injection pressure: 1877 bar - Shot volume: 1078 cm³ - Shot weight at max. stroke for PS: 981 g - Injection speed: 140 mm/s - Injection throughput: 539 cm³/s - Screw drive speed: 285 rpm - Plasticizing throughput: 98.3 g/s - Nozzle contact force: 82 kN ELECTRICAL PARAMETERS - Connected load: 341 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral conductor WEIGHT & DIMENSIONS - Net weight: 43.5 t - L x W x H: 11.89 x 3.22 x 2.77 m ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive Fgodpfx Aasw U N Ixe Ieh - Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) - Mould heating: 96 zones (3.5 kW each) - Euromap interface for handling: E18 - Euromap central computer interfaces: E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical centre platen - Parallel clamping & opening during injection process with bar parallelism control between FWAP and centre platen or BWAP and centre platen - ColorForm interface signal interface for connecting an RPM unit - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our plant in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your enquiry.

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Fsdpfxjzvmpnj Aa Iogh Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Fgedpfx Aaszvmxpo Ieh Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: excellent (used), Year of construction: 2011, KRAUSS-MAFFEI KM 420-4300 CX Injection Molding Machine YEAR OF MANUFACTURE - 2011 Control System: MC5 with color monitor, integrated control panel, and 3 USB ports Plasticizing Unit Complete plasticizing unit for thermoplastics, designed for abrasion resistance Screw diameter: 90 mm Back pressure valve: yes Nozzle: open Clamping Unit Clamping force: 4200 kN / 420 t Opening force: 249.6 kN Force of moving platen – opening: 124.7 kN Force of moving platen – closing: 102.4 kN Fgedpfx Aaezvgu Do Ieh Dimensions of mounting platens (H × V): 1270 × 1200 mm Distance between columns (H × V): 800 × 800 mm Mold opening stroke: 1020 mm Minimum mold height: 380 mm Maximum clearance / opening stroke of platens: 1400 mm Ejector stroke: 250 mm Ejector force: 95.4 / 48.6 kN Injection Unit 4300 Screw diameter: 90 mm Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Screw speed – standard/option: 195 / 270 rpm Electrical and hydraulic equipment Rated power of pump motor: 90 kW Installed power of heaters: 44 kW Number of cylinder heating zones: 7 Number of dry cycles according to EUROMAP 6: 1300 cycles/h Oil tank capacity: 1075 l Dimensions and weight Machine dimensions (L × W × H): 7.6 × 2.6 × 2.5 m Net weight with control cabinet: 24.2 t

Condition: used, Year of construction: 2007, machine/vehicle number: 4801250 / PH06 11 005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, overall weight: 55,000 kg, year of last overhaul: 2024, clamping force: 3,000 kN, mold height (min.): 1,000 mm, plate length: 2,800 mm, plate width: 2,200 mm, Equipment: CE marking, documentation/manual, For sale is a KraussMaffei LFI shuttle mould carrier for polyurethane processing and backfoaming of large-format components. The system was designed for PU moulding and LFI applications and features a hydraulic clamping unit with a movable lower mould mounting platen. Technical data: Manufacturer: KraussMaffei Type: FT-R-H-25-20-3600.0°.65° Year of manufacture: 2007 KM order number: 39000233 Control system: Siemens S7 Clamping force: 3,000 kN Opening force: 800 kN Parallel stroke: 600 mm Mould mounting platens: 2,500 x 2,000 mm Minimum mould height: 1,000 mm Maximum mould height: 1,500 mm Maximum total mould weight: 10,000 kg Maximum upper mould weight: 5,000 kg Upper mould mounting platen pivotable up to 90° Machine weight: approx. 55,000 kg Operating voltage: 400 V Scope of supply: Fgjdpfx Aoz Dn Ixja Ish LFI shuttle mould carrier Hydraulic units Control unit Shuttle / traversing unit Production moulds and temperature control units are not included in the scope of supply. Extensive original KraussMaffei documentation is available, including operating manuals, technical drawings, electrical diagrams and spare parts documentation. The machine is fully functional. Inspection under power is possible by prior appointment. The machine is located in the Hamburg area, Northern Germany. The exact location will be provided to qualified prospective buyers. Dismantling, loading and transport are to be carried out by the buyer. Further technical documentation, drawings and photographs are available upon request. Subject to availability.

Condition: excellent (used), Year of construction: 2016, clamping force: 6,500 kN, Krauss Maffei 650 GX SP 3000 Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Fgedpfx Aaey Eyxdj Ioh Type: Horizontal Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars V: 960 mm Distance between tie bars H: 1110 mm Shot volume: 1284 cm3 Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping Force: 6500 kN Tool Holding Force: 455 kN Platen Dimensions (H × V): 1540 × 1440 mm Space Between Tie Bars (H × V): 1110 × 960 mm Max. Mold Height: 1450 mm Mold Installation Height (Min./Max.): 450 / 1000 mm Opening Stroke: 1000 mm Ejector Stroke: 250 mm Ejector Force (Forward/Return): 95 / 49 kN Injection Unit Screw Diameter: 80 mm L/D Ratio: 21.3 Injection Pressure: 1538 bar Shot Volume: 1284 cm³ Shot Weight (PS): 1170 g Injection Rate: 141 cm³/s Injection Speed: 133 mm/s Injection Power: 60 kW Plasticizing Rate (PS): 139 g/s Heating Power Installed: 36 kW Nozzle Retraction Force: 7 kN Drive and Energy Installed Pump Power: 90 kW Dry Cycle Time (EUROMAP 6): 3.0777 s Dry Cycle Time (KM Norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net Weight: 12000 kg Max. Tool Weight: 11000 kg Oil Tank Capacity: 1180 l

Condition: like new (used), Year of construction: 2014, operating hours: 35,000 h, functionality: fully functional, Krauss-Maffei KM 1150/4300 MX Horizontal injection moulding machine by Krauss-Maffei with 1,150 tonnes of clamping force. Year of manufacture: 2014. Operating hours: 35,640. MC6 control system. Extras: ABB 6-axis robot, 24 hot runner zones, 10 pneumatic + 10 hydraulic sequential controllers. Can be shown in production. Technical Details CLAMPING FORCE: 11,500 kN Fgedpfsy Efkrox Aa Ieh OPERATING HOURS: 35,600 SCREW DIAMETER: 90 mm INJECTION PRESSURE: 1,839 BAR INJECTION VOLUME: 2,290 cm³ INJECTION WEIGHT: 2,084 g OPENING STROKE: 2,000 mm PLATEN DIMENSIONS: 2,210 x 1,910 mm MINIMUM MOULD THICKNESS: 600/1200 mm YEAR OF MANUFACTURE: 2014

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 Fsdpforr Efnsx Aa Isgh - removed from running machine - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei spare part no.: 5 Fgjdperr Egwsfx Aa Ish Dition: gebraucht

Condition: used, Year of construction: 2006, Injection moulding machine Krauss Maffei KM 800-4300 MX, year 2006 The machine is equipped as follows: - 5 hydraulic cascade controls - Injection unit with a 90 - MT5 control system - Krauss Maffei handling system Fgedpfjw Hwr Djx Aa Ijh - 2 conveyor belts

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control Fedjrr Ehqjpfx Aa Iogh - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 spare part number: 5 Dition: gebraucht

Year of construction: 2010, condition: ready for operation (used), A fully hydraulic large-format two-platen injection molding machine from Krauss Maffei with an LRX350 linear robot is available. Clamping force: 6500kN, injection unit: SP3000, screw diameter: 70mm, L/D ratio: 22.9, max. injection pressure: 2389bar, shot volume: 1232cm³, shot weight: 1121g, injection rate: 462cm³/s, screw speed: 285rpm, plasticizing rate: 108.6g/s, nozzle contact force: 129kN, mold opening force: 345kN, mold opening stroke: 1150mm, min. mold height: 600mm, max. daylight opening: 1750mm, ejector stroke: 250mm, ejector force: 95kN, max. mold weight: 11400kg, clear distance: 1200mm/1120mm, platen dimensions X/Y: 1510mm/1370mm. Robot payload: 35kg, travel X/Y/Z: 1200mm/2000mm/4000mm, conveyor dimensions X/Y: 2500mm/800mm, discharge height: 1000mm, max. conveyor belt temperature: 70°C. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2700mm, weight: approx. 31t, operating hours: approx. 75900h. Documentation available. An on-site inspection is possible. Available from approximately November 2026. Fgedpfezqfwyex Aa Ieh

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 spare part no.: 5 Fodpfxerr Eh Ao Aa Ijgh Dition: gebraucht

Year of construction: 2013, condition: ready for operation (used), Hydraulic injection moulding machine manufactured in 2013. This Krauss Maffei 35-180 CX features a plasticising size of 180 and a screw diameter of 28 mm. With 2 units available, this machine offers reliable performance for your production needs. If you are looking to get high-quality plastic processing capabilities, consider the Krauss Maffei 35-180 CX machine we have for sale. Contact us for further details. • Axes: not applicable • 2 units available (80 & 81)(82 is sold) Fgsdpfszr H Snox Aa Ijh • Plasticising size 180 • Plasticising arrangement H • Screw diameter 28 mm • Nozzle radius 10 mm • Nozzle bore 4 mm

Year of construction: 2020, condition: new, Krauss Maffei Touch panel the newest version for MC5/ MC6 Spare parts width- 37 cm height-47cm length-8cm Fjdpfjqvuicex Aa Iegh

Condition: ready for operation (used), The injection momlding machine corresponds to the hydromechanical two-platen series, clamping force: 550t, operating hours: approx. 80h, with Handling Krauss Maffei KM 250/ LRX-S 250. An on-site inspection is possible, the machine is located in Mexico. Fjdozrn Hmopfx Aa Isgh

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX *General* Year of manufacture: 2008 Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Fgsdsz Eu Uujpfx Aa Ieh Mould height min/max: 600 / 1,200 mm Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48