Used Kettenförderer Typ Redler Redler-Type Chain Conveyor for sale (41,571)

Year of construction: 2002, condition: excellent (used), We offer a Redler chain conveyor from Haas for sawdust, wood chips, etc. Pedpfx Ahjyarg Ujljpt Length: 21.00 m Channel: 100 cm wide, 70 cm deep Outer width: 120 cm in the middle, 155 cm wide at the curves Outer height: 85 cm Double chain Solid, heavy-duty feeder with two curves Inclined section: 7.50 m long, 60° angle Horizontal section (bottom): 6.50 m long Horizontal section (top): 7.50 m long Very good technical condition

Condition: excellent (used), Installed new in 2022, this conveyor was taking product from a low level multihead weigher up to a vertical form fill seal machine in a room where the height was restricted. As new condition. Ppsdpfxjrq Eawj Ahlet

Condition: like new (used), plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.300 mm infeed height : ± 800 mm total dimensions : ± 3.600 x 1.000 x 2.300 mm adjustable speed mobile Pedoy Rl E Tjpfx Ahlopt as new

Condition: used, plastic belt Ppedpfx Asy Hig Tehlst belt width 600 mm outfeed height ± 2.600 mm infeed height : ± 350 mm total dimensions : ± 5.800 x 2.400 x 3.150 mm mobile

Year of construction: 1968, condition: good (used), Steel chain hoist type Electus A2 380 volts 2 speed 3 meters chains length 12 meters cable length control bottle Psdpod E Akcsfx Ahljpt

Year of construction: 1969, condition: good (used), Steel chain hoist type T 302 400 Volt 2 lifting speeds chain length 3 meter Ppsdpfx Asd E Akkjhlet

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. Pedody Ewlepfx Ahlspt • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns.

Condition: like new (used), Belt width: 40 cm Carrier spacing: 30 cm Carrier height: 5 cm Intake height: 73 cm Hopper width: 135 cm Horizontal length: 350 cm Transport height: 226 cm Working height: +30 cm Machine ready for operation Pedpfx Ahjywdxxolopt Check out my other listings

Year of construction: 2014, condition: excellent (used), 4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. Ppodpfx Ahsif Ugljlst The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.

Condition: repair required (used), Year of construction: 2010, conveyor belt length: 3,000 mm, conveyor belt width: 500 mm, The plastic slat conveyor belt shown in the photos is for sale. The drive unit is missing (it was transferred to another belt), but the conveyor belt itself is in perfect condition. Pedpjy Nczpjfx Ahlept

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: – Oven belts in bread & pastry in industry Podpfx Aetp S E Eshljpt – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Condition: used, Length: 7 m, external width 1030 mm, height 530 mm, 4 chain paths. Ppjdpfov Eagvsx Ahljt

Condition: used, Chain conveyor - IDL000773 - length: 6,1 m - working width: 600 mm - electric motor: 1,1 kW - Chain conveyor with pushers after moulder or resaw. Psdjufib Rspfx Ahlspt

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June: Horstmann chain belt conveyor, year of manufacture 2011 Manufacturer: Horstmann Year of manufacture: 2011 Length of feed belt: approx. 3000 mm Length of incline section: approx. 5000 mm Gooseneck: approx. 1000 mm Ppsdpfxoy Uwqpo Ahljt Belt width: 1100 mm Conveyor speed: approx. 0.2 m/s (max. 0.3 m/s) The conveyor is currently still in operation and can be inspected while running until 06/05/2026. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Z-conveyor, conveyor belt with metal slat belt GÖSSLING Metal belt conveyor, belt conveyor, stationary conveyor Machine No.: 15867 Year of manufacture: 2005 Usable length: 3100 mm Belt width: 400 mm Frame profile height: 70 mm Insertion width: 465 mm Lower insertion length: approx. 1500 mm Conveyor incline length: approx. 800 mm Upper discharge belt length: approx. 600 mm Height offset: approx. 170 mm Belt speed: approx. 22 m/min. Conveying height - discharge height: approx. 1220 to 1390 mm Insertion height: approx. 1050 to 1270 mm Belt drive motor output: approx. 0.37 kW Power supply: 400 Volt, 50 Hz - Metal slat chain made of stainless steel - Belt drive via NORD gear motor - Robust sheet steel construction - Height adjustable via hydraulic lift in the base - Mobile on fixed castors Ppodpswvv Rwofx Ahlet Required floor space L x W x H: 3160 x 750 x ... mm Weight: 420 kg Good condition

Condition: used, Chip conveyor, scraper conveyor with coolant tank BMF Type KF 200 K17 Ident. No.: Order No.: 915979 Year of manufacture: 1992 Metal link width: 200 mm Pitch between scrapers: approx. 380 mm Possible chip removal length: 1100/2100 mm Insertion length: approx. 1350 mm Insertion height: 370 mm Insertion width: 460 mm Hopper width (top): 400 mm Ppsdpfjhwt H Ajx Ahlet Hopper width (bottom): 170 mm Conveying height - discharge height: approx. 1250 mm Motor power belt drive: 0.37 kW Power supply: 400 Volt, 50 Hz - Scraper chain driven by geared motor - Coolant tank without coolant pump Required space (L x W x H): 3800 x 1300 x 1650 mm Weight of chip conveyor: approx. 500 kg Good condition The chip conveyor comes from a GILDEMEISTER CNC lathe. The conveyor is suitable for chip transport from a milling machine, lathe, or machining center.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Podpoviwdmofx Ahlopt Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Roller conveyors with chains pull 90° RA1846 Type: Transnorm 3300-600-550 Length: FL = 3300 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. Ppjdpfek Abg Dsx Ahlet We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Psdpfx Ahok Abtaslopt Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, VHS chain conveyors RA1845 Type: VHS chain conveyor 4340-480-410 Length: FL = 4340 mm Chain distance: (AK) = 410 mm Total width: 480 mm height (BH): 120 mm Podpfx Ahjtt E R Solept Scope of delivery 1x4340 mm chain conveyors Optionally available: Supports Side guide one and on both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Psdpfx Ajrvmtdjhlept Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: used, Roller conveyors with chains pull 90° RA1847 Type: Transnorm 9900-600-550 Length: FL = 9900 mm Conveyor width: FB = 550 mm Total width: 600 mm The chains off slide width: 700 mm height (BH): 140 mm Support roller pitch: 80 mm including pneumatic stopper Optionally available: Supports: Side guide one and both sides frequency inverter Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Ppjdpfx Ahek Abg Isljt Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2013, Kersting plastic chain conveyor belt conveyor conveyor Inclined conveyor washing GF 3350-720-620 RA1974 Technical data: Conveying length (NL): 3350 mm Framework width (NB): 720 mm Pedpfx Ahek Abpasljpt belt width (GuB): 620 mm Height/band run (BH): from 920 mm to 1250 mm rising +/- 50 mm height adjustment Conveying speed (v m/s): pleas contact us with you needed Speed Drive: DEW- Gearmotor Electrical data: 400 V / 50 Hz / 0,37 kW Belt: plastic chain with toothwheel drive Year of construction: 2013 Special feature / accessories: Drip tray to catch the washing water All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With best regards, your team at Dr. Sonntag GmbH & Co. KG - Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Psdpfx Ahjrixkbelspt Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Roller conveyor 2750/2180/1500-420-350 with chain drive Podpfx Ahek Abtdjlopt RA2003 The roller conveyor with chain drive is in good condition (used) and fully functional. It has a SEW brand geared motor. The feet are not included in the scope of delivery. These are optionally available on request. Technical data: Condition: good (used) Conveyor belt length (FL): 2750/2180/1500 mm Nominal width (NB): 420 mm (outer width) Roller width (RB): 350 mm Usable width (NUB): 355 mm Side walls: stainless steel Castors: galvanized, diameter 50 mm Roller pitch: 65 mm (distance) Motor: SEW Eurodrive Drive: Chain drive with continuous chain, guided via tensioning device Electrical data: 380 V, 0.75 kW 3.7 A Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guide Frequency converter for infinitely variable speed control Availability: 3 identical tracks - individually customizable and combinable Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik