Used Kairos Engineering Srl Esp for sale (20,491)

Year of construction: 2022, condition: new, Electrostatic filters are considered the most sophisticated technology, currently available, for the collection of solid and liquid particles existing in an exaust air flow. The electrostatic uptake allows the separation of any particle from the air, regardless of its size. In fact, the agglomeration of very fine particles is possible with efficiencies up to 99% on atmospheric dust according to the EN 779 method.The use of electrostatic filters therefore allows to obtain air completely free of dust , smoke, spores, bacteria, pollen ecc . The main advantages deriving from the use of electrostatic filters are: Klodpfxeh Aku Te Ampor • High filtration efficiency • Low pressure drops • Low operating cost • Limited maintenance interventions • High operating reliability

Year of construction: 2022, condition: new, The fabric filter unit consists of one or more insulated compartments containing rows of fabric bags in the shape of round, flat or shaped tubes, or pleated cartridges. The particles contained in the exhausted air move along the surface of the bags, then radially through the fabric. The particles are retained on the upstream face of the bags and the clean gas stream is discharged to the atmosphere. The filter is operated cyclically, alternating with relatively long filtering periods and short cleaning periods. During cleaning, the dust that has accumulated in the bags is removed. Fabric filters collect particles ranging in size from submicron to several hundred microns in diameter with efficiencies generally greater than 99 or 99.9 percent. The layer of dust, or cake of dust, collected on the fabric is primarily responsible for such high efficiency. The cake is a barrier with tortuous pores that trap particles. Kljdpfxeibd Azj Ampsr

Year of construction: 2022, condition: new, machine/vehicle number: XXXX, Baffle spray scrubbers are a technology for air pollution control. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas stream to atomize some liquid as it passes over them. Ksdpfx Ajh Akn Usmpslr

Year of construction: 2022, condition: new, The packed bed wet scrubbers is designed to remove gaseous or vaporous pollutants from an air stream. The process is accomplished by contacting the contaminated air stream with a scrubbing liquor that absorbs or chemically reacts with the pollutants. The cleaned air is then discharged to the atmosphere and the contaminated scrubbing liquor is either disposed of in the approved can be recovered and reused in the original on other processes. In the vertical counter-current design, gas flows upward while scrubbing liquid flows down through banks of sprays. The absorption of gases takes place in the scrubbers random packing section and scrubbing liquid is introduced into a liquid through or spray distribution system. A high-efficiency mist eliminator removes entrained liquids. Clean gas go directly in the atmosfere . Kjdpfx Amsh Apkdepolr

Year of construction: 2022, condition: new, The Venturi Scrubber is a device that generally consists of a centrifugal part capable of separating the solid parts from the liquids and of a Venturi column that narrows in the middle section to vary the pressure and therefore allow the polluting solid particles to fall through the fumes. This type of Scrubber is used for the removal of dust and pollution present in corrosive and dangerous industrial gases. Venturi Scrubbers are used in the abatement of particulates that come from coal, oil or wood boilers, the textile industry but also for emissions from the chemical industries, wood industries, paper mills, etc. Ksdpoh Atp Ajfx Ampslr

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Kedpfeh Akv Hex Ampolr

Year of construction: 2022, condition: new, The Cyclonic Dust Separator (cyclone) exploits the centrifugal and gravitational force to carry out the dedusting of the air flow. The tangential entrance of the machine forces the air to whirl around inside the structure. The contained dust loses speed due to friction with the external surface of the system and is separated thanks to the gravitational effect. The air is released in the central part in correspondence with a counter-duct which, creating a depression, attracts the air inside and allows it to escape. Ksdjihu T Tepfx Ampolr

Year of construction: 2018, condition: like new (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Klsdeinbi Sopfx Ampsr

Year of construction: 2010, condition: good (used), functionality: fully functional, machine/vehicle number: -, Wet Scrubber (fume abatement) with floating balls complete with pump and centrifugal fan , two booster tanks , chimney with sampling scale . Flow rate about 40,000 m3/hour . Kledpfx Asuihz Dsmper

Year of construction: 2010, condition: excellent (used), Deflector spray scrubbers are an air pollution control technology. They are very similar to spray towers in design and operation. However, in addition to using the energy provided by the spray nozzles, baffles are added to allow the gas flow to atomize liquid as it passes over them. Ksdpfok D Hd Aex Ampjlr

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Ksdsy D Ugyspfx Ampelr Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2021 Kjdpfx Amsy Dvpvepelr Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: good (used), Gough Engineering GV1 Vibratory sieve Kedpfxoyw Tbce Ampolr Stainless, 450mm mesh diameter, mobile, 3Ph

Condition: like new (used), Refrigeration pack bought new in 2023 and never used. Cost almost £2 million, this was installed to run a spiral freezer and other machinery but due to the company going bankrupt, it was never commissioned. Extremely efficient to run compared to conventional systems. Kodpfx Aswcwbqjmpelr

Condition: excellent (used), Year of construction: 2018, REF: MM5727 1 x Zumex Food Engineering juice extraction and flitration system with elevator. Manufactured completely in stainless steel. Technical specification ⚙️ Kljdpfx Amet Uircspsr ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Serial number - 454293.  ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification: Sizes     Head Unit     Oranges/MIN     KG/H     L/MIN     L/H 9-10-11     Kit 9     150,35     902,4      6,01     360,84 5-6-7-8     Kit 8     133,68     1145,4     7 ,64     458,22 2-3-4     Kit 7     116,94     2338,8     1 5,59     935,53 Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5m L x 1m W x 2.2m H. CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. Kjdpfxst Uim He Ampslr ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: used, Year of construction: 2002, total width: 900 mm, total length: 1,400 mm, total height: 1,600 mm, Weight: 500 kg Price: On request - Year: 2002 - Documentation available: No - CE certificate present: No - Main motor power [kW]: 3.0 - Max. cutting height [mm]: 120 - Max. saw blade diameter [mm]: 400 - Saw blade tilt angle [°]: 90 - Voltage [V]: 400 - Transport dimensions: 1400mm x 900mm x 1600mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Klodpfxoyvf H Tj Ampjr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,600 mm, total length: 1,200 mm, total height: 1,600 mm, Weight: 250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 56840505 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 200 - Max. cutting width at 90° [mm]: 450 - Max. saw blade diameter [mm]: 550 - Saw arm tilt angle [°]: 45 - Saw blade tilt angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 1200mm x 1600mm x 1600mm (l x w x h) - Transport weight [kg]: 250kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Klodpfx Ajymtcqemper Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Dimensions (LxBxH): 170 x 65 x 160 cm Price: On request - Details: Kodoyymxyspfx Ampolr - └ Description: Roller width 1050mm - Documentation available: No - CE certificate present: No - Voltage [V]: 220 - Current consumption [A]: 1.5 - Transport dimensions: 1700mm x 650mm x 1600mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2006, total width: 1,600 mm, total length: 1,700 mm, total height: 1,700 mm, Weight: 500 kg Price: On request Kodpfoytbgdjx Ampjlr - Year: 2006 - Documentation available: No - CE certificate present: No - Serial number: 15600600437 - Main motor power [kW]: 5.5 - Max. cutting height [mm]: 130 - Max. cutting width at 90° [mm]: 470 - Max. saw blade diameter [mm]: 550 - Saw blade tilt angle [°]: 45 - Voltage [V]: 400 - Current consumption [A]: 12 - Fuse [A]: 16 - Power [kW]: 5.5 - Transport dimensions: 1700mm x 1600mm x 1700mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2018, total height: 1,800 mm, total length: 1,750 mm, total width: 1,800 mm, Empty weight: 975 kg - Year: 2018 - Documentation available: No - CE marking present: Yes Kljdpoyf Hc Iefx Ampjr - CE certificate present: No - Serial number: 173180025 - Main motor power [kW]: 3 - Working range X [mm]: 3000 - Working range Y [mm]: 3000 - Working range Z [mm]: 50 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 4 - Vertical drilling unit: Yes - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 3 - Transport dimensions: 1750mm x 1800mm x 1800mm (l x w x h) - Transport weight [kg]: 975kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: F50, For sale is a FiberFlow F50 cooling die from DIL Engineering GmbH, a specially developed solution for texturing alternative proteins in high-moisture extrusion (HME). The cooling die is ideal for use in research and development and enables the targeted production of fibrous, meat-like textures, which are in high demand particularly in modern meat and fish alternatives as well as in the snacks and convenience foods sector. The FiberFlow F50 is designed for a throughput of up to 50 kg/h and features a rectangular geometry for optimal flow control and fiber formation. The system has a modular design and can be configured with one or two segments depending on requirements. Additionally, one or two separate cooling circuits are available, ensuring precise temperature control and thus consistently high product quality. The integration of inline measurement systems is possible and allows for continuous process monitoring and optimization. Particular emphasis was placed on hygienic design, ensuring that the system meets the high standards of the food industry. Its well-thought-out design makes cleaning quick and easy, which is a significant advantage, especially in a development setting. The FiberFlow F50 is ideal for pilot trials, product development, and the optimization of formulations in the field of alternative proteins, and can be easily integrated into existing extrusion lines. Kodpfx Asy D Hrbempslr

Condition: new, functionality: fully functional, Our state-of-the-art automatic tube filling machine is a versatile all-rounder, specifically designed to optimally support companies with the highest quality requirements. Thanks to its superior build quality and wide application range, it offers intuitive operation to efficiently and reliably optimise your tube filling processes. Powerful drives and a user-friendly colour touchscreen control system enable maximum flexibility for format and product changes, greatly simplifying your tube filling operations. The machine features memory slots for rapid and reproducible setting of all relevant machine parameters. If you are looking to optimise your tube filling processes with strong production performance while maintaining high quality, Impuls Packaging is your ideal partner. System Overview Parameters: Klsdpfx Asyq Hgkempor Power supply: AC 220V / 50Hz or 110V / 60Hz Power: 4 kW Filling range ● 2–5 ml ● 5–30 ml ● 10–140 ml ● 30–300 ml (customisable) Tube diameter: 10–50 mm (customisable) Tube length: 30–250 mm (customisable) Hopper volume: 50 L Filling accuracy: ±1 % Capacity: 40–60 tubes/minute Machine dimensions: 2050 × 900 × 1900 mm Net weight: 850 kg

Condition: excellent (used), kay engineering 600 litre jacketed cooking vessel with side wall scrape and emulsifier. On weigh cells. All S/s. Was previously doing soups with particles and smooth soups without particles. Kodpju Aud Ijfx Ampelr

Condition: new, Year of construction: 2023, machine/vehicle number: MR005217, Unique 3-axis controlled machine for horizontal and vertical drilling in on sheet metal and solid wood for furniture and interior construction. Machine easy to set via touch screen display, programs easy to call up.Machine is equipped with the following options: - Reference pin for row drilling - Additional pneumatic clamping units - Reference tool for setting clap stops Technical specifications: - Maximum panel thickness : 60 mm - Number of drilling spindles total : 21 pieces - Number of drilling spindles counterclockwise : 10 piece - Number of drilling spindles clockwise : 11 pieces - Spacing between drilling spindles : 32 mm - Total distance first and last spindle : 640 mm - Maximum drilling diameter : 40 mm - Maximum drilling depth : 65 mm - Maximum drilling height : 55 mm - Engine power : 2 hp Kljdpfx Ameugu U Sjpjr - Serial number : 1622300606