Used Itv Schneidmühle for sale (38)

Condition: used, machine/vehicle number: 11056, 3-blade rotor 2 rows of stator blades Rotor diameter: 350 mm Psdpfoyr Tihex Altepu Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, Drive 37kw (ca be changed to max. 75 kw) rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Psdpfx Aszdc Ikjltjpu Opening inlet 500 x 600 mm

Condition: used, • Load capacity: 350 kg Podpfoxnvq Eox Altspu • 6 suction cups, 250 mm diameter, adjustable • Vacuum suction cups can rotate 90° and tilt 90° • Suction cups with guide tube and electric traversing carriage • 2 units available, new and unused • Immediately available IV: + Design standards 1. The design of the system strictly complies with the European CE standard EN 13155: 2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVV I8 standard, with the most important design parameters exceeding the aforementioned standards. 2. Safety factor: The main structure has a safety factor of 4.0, the safety vacuum level is 65%, and the standard is 85%, which is 20% above the safety standard. V+ Equipment testing and standards 1. General matters Check whether all the materials are complete, whether the exterior of the equipment is painted or scratched, whether the suction cups are damaged, and whether the tube is damaged. 2. Points checked before leaving the factory © Suction test of the equipment © Pressure retention test of the equipment © Alarm test © Various control components • Special price: €4,900

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Pjdpfx Aloyxr T Totepu Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, LDS Type: V875 Shaker System V875-440 with SPA40K Amplifier Vibration exciter for medium forces Technical data: Head expander 850 x 850 mm Fixture dimensions: 440 mm Ppedpfjzg Txwjx Altju Sinusoidal force vector 35.6 kN (peak) Random force vector 35.6 kN (RMS) Shock force vector 106.75 kN (peak) Frequency range 5 to 3000 Hz Test specimen mass max. 600 kg Acceleration max. 1078.7 m/s² Velocity max. 1.8 m/s Condition: used Weight: Shaker approx. 2200 kg Blower 181 kg Amplifier: 622 kg Scope of supply: (See images) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), mileage: 46,233 km, power: 132 kW (179.47 HP), first registration: 09/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2021, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, onboard computer, power assisted steering, power mirror, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - Exterior mirrors with turn signal indicators - Automatically dimming rearview mirror - AUX input - Outside temperature display - Becker phone holder Pjdpjzfwkujfx Altepu - Passenger seat bench - DAB radio - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Rear doors - Adjustable steering wheel - Folding exterior mirrors - Air conditioning - Comfort seats - LED lighting - 16-inch alloy wheels - Metallic paint - Center armrest - Multifunction steering wheel - Particulate filter - Radio/CD player - Rotating beacon - Rearview camera - Disc brakes - Headlight height adjustment - Headlight cleaning system - Side door - Immobilizer - Bumpers in body color - Heated windshield = Additional Information = General Information Number of doors: 4 Cab: single cab Intended use: livestock farming Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Maximum front axle load: 1850 kg Maximum rear axle load: 2100 kg Weights Unladen weight: 2,550 kg Payload: 950 kg GVWR: 3,500 kg Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 09/2026 History Service records: Available (dealer maintenance) Condition Technical condition: very good Optical condition: very good Damage: none = Company Information = Nidro cars Holland is located in the center of the country and is the right place to purchase your car, van or truck. The indicated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: SEE OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, tank capacity: 26,000 l, usable tank capacity: 26,000 l, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, overall weight: 36,000 kg, wall material: stainless steel, number of chambers: 1, manhole diameter: 500 mm, operating temperature: 140 °C, operating pressure: 4 bar, pressure (max.): 6 bar, Stainless steel V4A tank container with a domed top lid, 50 cm in diameter, and a 3-inch BSP bottom outlet, which corresponds to 7.5 cm. Insulated, cleaned (and can be heated). Walkways on top. Empty weight approximately 3.7 tons. Two identical units available. Located in Antwerp. Archive photos, original photos, and data sheets are available upon request and can be sent by email. All information is provided without guarantee, subject to errors and prior sale. Ppodpfxsydl A De Altju

Condition: ready for operation (used), Balluff BIS C-620ST2-S evaluation unit, version 1.3, used, 100% functional. Pedpfx Alei D T D Sstjpu

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, top plate 355 x 250 mm, outer diameter of drain outlet 59 mm, used, in good condition, 100% functional. Ppedpfji D N Nhsx Altju

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 6,200 mm, total width: 2,070 mm, total height: 2,480 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,100 kg, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, General information Number of doors: 3 Year of manufacture: 2024 Technical information Number of cylinders: 4 Engine capacity: 2.299 cc Max. front axle load: 1850 kg Max. rear axle load: 2100 kg Weights Empty weight: 2.043 kg Carrying capacity: 1.457 kg GVW: 3.500 kg Maintenance APK (MOT): tested until 12/2027 Financial information VAT/margin: VAT qualifying = Additional options and accessories = - Airbag - Alarmsysteem class 1 - Beifahrerbank - Front center armrest - Immobiliser - LED lighting cargo area - Outside temperature display - Radio - Radio/USB/Aux - Reversing camera - Running board - Side-Bars - Side door - Tined glass - Two rear doors can be rotated 270° = Remarks = Loading space completely finished with sliding door to loading space + scaffolding. Ppsdpfjzcdkqex Alteu

Condition: used, functionality: fully functional, mileage: 90,706 km, power: 80 kW (108.77 HP), first registration: 03/2008, overall weight: 5,000 kg, fuel type: diesel, color: orange, axle configuration: 4x4, operation weight: 1,950 kg, empty load weight: 1,950 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro4, suspension: steel, Year of construction: 2008, operating hours: 4,542 h, Equipment: ABS, additional headlights, air conditioning, all wheel drive, car registration, differential lock, hydraulics, low noise, trailer coupling, truck registration, Truck with interchangeable body: + Bokimobil + HY1251B + Registered: 03/11/2008 + 90,706 km; 4,542 operating hours + Hydrostatic transmission with creep speed, max. speed 62 km/h + Amber warning light + Front power take-off + Front and rear hydraulics, each with continuous operation + 3-way tipper + Ball hitch (2,625 kg) + Switchable all-wheel drive + Differential lock, rear axle + Air conditioning + Radio/CD Psdpfx Aljzhv Hyjtepu + 2-seater + Rear window + Tipper body with wooden floor and lashing eyes + 4-cylinder Iveco diesel engine, 109 hp, 2998ccm, Euro 4 + Variable snow plow Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Year of construction: 2025, condition: used, New: Yes Please contact us for more information. Ppsdpozbmiaofx Alteu

Condition: new, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 500 mm, loading space volume: 4 m³, Year of construction: 2025, Carrying capacity: 10.000 kg Ppodpfx Aszbl H Dslteu

Condition: new, axle configuration: 2 axles, total length: 5,250 mm, total width: 2,300 mm, total height: 1,000 mm, color: red, Year of construction: 2025, Carrying capacity: 24.000 kg Tyre size on axle 1: 24R20.5 Tyre size on axle 2: 24R20.5 Tyre size on axle rear: 24R20.5 Ppsdpfezbl Afox Alteu

Condition: used, axle configuration: 2 axles, Year of construction: 2006, VAT/margin: VAT qualifying Pjdpfxezblrgo Altepu

Condition: used, Year of construction: 2019, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Atlas two-shell grapple with extension / grapple / year of manufacture: 2019 / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Tare weight (kg): 814 - Shell width (mm): 600 - Opening width (mm): 1,400 - Capacity (liters): 350 You can find the precise technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, all of which are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 517131 = Further information = Application: Construction Podpfxjzffl Ts Altjpu Unladen weight: 814 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Two-shell grapple with extension / Grapple / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Weight (kg): 1,640 - Shell width (mm): 1,080 - Opening width (mm): 1,800 You can find the exact technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Psdpfx Aozffl Hjltspu Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale are subject to change! Internal No.: 619003 = More information = Application: Construction Unladen weight: 1,640 kg Please contact Marius Herden for further information.

Condition: used, Rexroth axial piston pump AKP71 with valve- refurbished - removed from Demag Ergotech 6 conceptmanufacturer: Rexroth Type: AKP71 Ppsdpfoit Ruxjx Altou spare part no.: 1 manufacturer no.: R900904809, R9009363type code: SYDFEE-1X/71RKB4-10E3CX2M-027 (SYDFEE-11/71RKB4-10E3CX2M-027)The digit before the first slash describes the device series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: überholt

Condition: used, maximum load weight: 26,347 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2015, next inspection (TÜV): 05/2026, total width: 2,600 mm, total height: 4,000 mm, Equipment: ABS, KRONE COOL LINER MULTITEMP GENERAL VEHICLE DATA ? Vehicle Type: SDR 27 eL4-MT ? Fifth Wheel Height Unladen: 1,150 mm ? Permissible Fifth Wheel Load: 12,000 kg ? Permissible Axle Load: 24,000 kg ? Permissible Gross Vehicle Weight: 36,000 kg ? Technically Permissible Axle Load: 27,000 kg ? Technically Permissible Gross Vehicle Weight: 39,000 kg CHASSIS ? Continuous chassis design with double-T longitudinal beams and cross members ? Rear cross member with diagonal bracing ? Front height 10 mm (8 mm sliding plate) ? 2" Kingpin ? Rear underrun protection device according to EC Directive ? Side underrun protection replaced by pallet box ? Sliding step ladder at the rear SUPPORTING DEVICE ? Two mechanical landing gears with 12 t load capacity each ? Semi-circular design with support plates ? One-sided operation on the right side AXLES AND SUSPENSION ? 3 axles with 9,000 kg load capacity each ? BPW axles with air suspension and disc brakes ? Brake discs Ø 430 mm ? Lifting and lowering system with automatic ride height memory ? Fully automatic electronic lift axle control for the 1st axle ? Manual lift axle operation as an aid for starting ? Preparation for lift axle control via towing vehicle TIRES ? 6 tires 385/55 R 22.5, manufacturer Dunlop ? 1 complete spare wheel, manufacturer Dunlop ? Without spare wheel holder FENDERS ? Plastic wheel covers ? Splash protection device according to EC Directive BRAKE SYSTEM ? Braking system according to EC directives / ECE R13 ? Spring brake parking brake ? Diagnostics via ISO7638 connector ? Brake lines approx. 350 mm above the frame height ? Preparation for KRONE Telematics Cool ? 2 wheel chocks ? Wabco braking system ? EBS modulator with RSS (Roll Stability Support) ? EBS system 2S/2M LIGHTING AND ELECTRICAL SYSTEM ? LED license plate lighting ? LED outline lights ? LED side marker lights ? 24-volt system ? 7-pole socket according to DIN ISO 1185 ? Additional 7-pole socket for special functions ? Additional 15-pole socket DIN ISO 12098 ? Full-LED taillights ? LED rear fog light ? 2 LED reversing lights CHASSIS ACCESSORIES ? Delta rubber bumper profile at the rear ? 2 Roll-Compression Buffers at the rear ? Enclosed pallet box for 36 Euro pallets ? Plastic diesel tank approx. 240 liters, suitable for biodiesel ? Tank opening on both sides with lockable cover FLOOR ? Low-Noise aluminum floor panel ? Floor load capacity tested according to CSC / EN 283 ? Rear area additionally reinforced BODY STRUCTURE ? KRONE Cool Liner Multitemp (Duoplex Steel) ? Thermal bridge-free sandwich construction ? CFC-free insulating foam Body dimensions ? Internal length: 13,310 mm ? Internal width: approx. 2,465 mm ? Internal height: 2,700 mm Podpfxjzcidij Altspu Panel thicknesses ? Floor: 125 mm ? Front wall: 50 mm ? Roof: 85 mm ? Rear doors: 90 mm ? Side walls: 60 mm FRONT WALL ? Reinforced front wall for Carrier or Thermo-King refrigeration unit ? Crash-tested design according to Swedish standard test ? 4 spacer profiles for optimal airflow ? Impact plate on the front wall ROOF ? Sandwich roof with integrated cable routing ? Reinforcement for evaporator mounting ? Evaporator positioned centrally at the rear ? 4 LED interior lights ? Door contact switch for interior lighting ? Preparation for KRONE Telematics Cool SIDE WALLS AND LOAD SECUREMENT ? Sandwich side walls with steel top layer ? PVC-coated interior ? Aluminum corner kick plate approx. 300 mm high ? 1 row of recessed slotted hole lashing rails ? Lashing rail height 800 mm

Condition: used, mileage: 450,000 km, power: 294 kW (399.73 HP), first registration: 11/2011, fuel type: diesel, empty load weight: 12,010 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 2,600 mm, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, with company building, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, front exhaust, automatic transmission, differential lock, fog lights, work lights, storage box, leaf-air suspension, trailer coupling with air and light connections, aluminum tank, low-noise G1, 2nd axle liftable, 2nd axle steered as front trailing axle, container locking system, rear supports, side aluminum underrun protection, roof hatch, green environmental badge. Wheelbase: 2600 mm. Superstructure: Meiller AK 16.T telescopic skip loader system. Transmission: ZF 12 AS 2130 DD TipMatic, wheelbase: 2600+1350, M cab, tank capacity: 450l. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Pedpjy A Tckjfx Altepu

Condition: new, empty load weight: 490 kg, maximum load weight: 810 kg, overall weight: 1,300 kg, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,950 mm, tire size: 185/70r13, Roadstar 400 tandem box trailer from *Cheval Liberte / Debon*. Attractive *design*, *aerodynamic front*, *sandwich walls*, *aluminum floor* and *polyester roof* are combined in this *box*. * *Hardly any other *car trailer* has a similarly outstanding *driving behavior* as this one! The *aluminum box trailer* is equipped with the *Pullman2 chassis*, which was developed by *Cheval Liberte* itself. The low loading height of just 35 cm and the *independent suspension* with *trailing arm*, *coil spring* and *shock absorber* to *automobile standard* ensure optimum* driving characteristics*. The *flat drive-on angle* is ideal for loading *motorcycles* and *quads*. Outstanding is the *ramp of the poly box trailer*, which can also be opened as a *door* for easy loading of *pallets* and other *goods*. Podpjqah R Aefx Altspu The extensive standard equipment of the *car trailer* includes a *poly roof* and *poly front* in one piece, *sandwich walls*, *aluminum floor*, *side flap*, *folding door system*, *100km/h*, *interior light*, *automatic support wheel*, *towing eyes*, *sturdy frame* and a *V-drawbar*. Useful box trailer accessories such as *motorcycle rocker*, *stand rail*, *motorcycle straps*, *tie-down straps, rear supports* and* lashing eyes* are also available. The body is splash-proof.

Condition: used, mileage: 178,613 km, power: 118 kW (160.44 HP), first registration: 06/2010, fuel type: diesel, overall weight: 4,600 kg, next inspection (TÜV): 06/2028, color: white, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, Internal vehicle number: G170470 Ppedpokkt Nyefx Altju Available immediately at our yard in Kaufungen More information at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) The auxiliary battery needs to be replaced. Sewer inspection vehicle RCA proline with satellite inspection system Vehicle features: - Mercedes-Benz Sprinter 516 CDI, panel van, color: white - First registration: 06/2010, registered as a self-propelled work machine, green license plate - Wheelbase: 4025 mm - Gross vehicle weight: 4,600 kg - Engine power: 160 hp - Reinforced front axle (spring + damper) - Reinforced front axle stabilizer - Rear axle stabilizer under the frame - Reinforced shock absorbers - High-roof and rear door - Auxiliary hot air heater - Rotating beacon, yellow, front left/rear right - Rear door, two-wing, 270 degrees - Mileage: approx. 178,613 km TV inspection system - RCA proline with satellite - Control unit RCA proline - Cable reel ELKA 600 with approx. 380 m of camera cable - Cable reel K15 sync. with approx. 120 m of camera cable and 1 separate push cable with approx. 40 m - Swivel gantry with winch for lowering the camera/carriage - 1 carriage L 135 for main channels DN 135 to DN 1500 - 1 carriage L 100 cross DN 100 - DN 500 - Additional halogen lighting, inclination measurement and deformation measurement - M-series, satellite inspection DN 135 - DN 1500 - Computer package with monitors - Rear view camera with monitor for the driver to position the vehicle when the rear doors are open - Water tank - Power supply via gel batteries Financing example: * Internal number: G170470 * Purchase price: 29,900.00 € * Down payment: 10% * Term: 60 months * Monthly rate: 468.31 € Residual value: 5,980.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to individual customer requirements. Chassis, Fifth Wheel, and Transport Fine-grained steel welded construction, fifth wheel plate with interchangeable 2" kingpin, mounting position for warning signs at the rear, outer frame with "Load-Lock profile" for lashing straps, 24-ton capacity, two-speed landing gear, single-sided operation, lashing eyes, yellow marked, 2 of which are located at the rear as towing eyes, container locking: 4 pairs of container locking mechanisms embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, pocket recesses embedded in the outer frame, 80 x 80 mm internal dimensions, pocket recesses embedded in the center of the floor, 80 x 80 mm internal dimensions, plug-in crossbars B=80/ D=80/ L=1200 mm, hot-dip galvanized, lashing eyelets embedded in the outer frame, 5 tons each, 2 storage boxes b= approx. 1230 / h= approx. 450 mm, closed and mounted across the entire width in front of the axles, replacing side impact protection, front locking mechanism can be inserted as a pin, lashing/crossbar rails embedded transversely in the floor across the entire width to the outer frame, approx. 100 mm high, with 20 mm round steel rails, top and bottom, distance from top to bottom approx. 60 mm (of the round steel), with angle sheet at the bottom as a closure, open halfway downwards for lashing and inserting crossbars 80 x 80 mm, storage compartment for warning signs, open, as technically possible. Axles and Suspension SAF disc brake axles, "axles/chassis laser-measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brake", 2 driving heights, can be switched over via hand knob: 1 x for saddle height 1120 mm Ppsdpfx Aozb Iu Djltsu 1 x for saddle height 1200 mm Braking System 2-line compressed air braking system, color-coded lines for easy maintenance, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, EBS, electronic braking system with EBS socket at the front, with lifting and lowering valve, vehicle - driving stability system Wheels and Tires 385/65 R 22.5", steel rims, factory silver Electrical System 24 Volt, 4 x 3-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable Rotating beacon with holder, switched via parking light (light can be removed) 2 pairs of warning signs double LED illuminated, extendable to 4500 mm and removable with plug. With additional holder at the rear Additional 7-pin socket (according to ISO 1724) in the underride guard at the rear Floor Sieve-printed panels approx. 30 mm thick, transverse impact protection with omega inserts, on longitudinal cross members for high point load capacity for forklift axle load up to max. 7100 kg Front Wall / Front Corner Posts 25 mm aluminum hollow profile, 1650 mm high, corner posts steel in volume design Front wall additionally covered with 1250 mm high sieve-printed panel on the inside "Crash blocker", at the bottom inside at approx. 140 mm height with steel ram protection Storage compartment for plug-in crossbars 80 x 80 on the inside of the front wall Painting Frame: Hot-dip galvanized including passivation or pa

Condition: used, mileage: 581,000 km, power: 308 kW (418.76 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 9,850 mm, total width: 2,550 mm, loading space length: 7,450 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, spoiler, tail-lift, Year of manufacture: 2018 Front axle: Steering; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Engine capacity: 10.837 cc Empty weight: 11.270 kg Carrying capacity: 15.730 kg GVW: 27.000 kg Registration number: 27-BLJ-8 Psdpfjy R Ug Hjx Altepu = Additional options and accessories = - Air horn - Air suspension - Alarmsystem - Camera system - Heavy duty engine brake - LED lighting cargo area - Line assist - Outside temperature display - Radio/CD player - Reversing camera - Roof spoiler - Sleeper cab - Vehicle heater

Condition: used, mileage: 379,614 km, power: 92 kW (125.09 HP), fuel type: diesel, overall weight: 3,500 kg, maximum load weight: 800 kg, first registration: 05/2012, reconditioned engine with 12 month warranty \atp expired to be renewed Ppodpfevikdgox Altou For information