Used Industrieplan Paint Finishing System for sale (40,996)

Condition: good (used), Year of construction: 1989, functionality: fully functional, Equipment: cabin, Manufacturer: Garmat Belgium Type: M 6/7A Year of manufacture: 07/1989 Lhsdszcfp Iopfx Al Ieh Work area volume: 70.5 m³ Fan capacity: 24,000 m³/hour Motor power: 7.5 kW Gas burner: 200 kW Total electrical connection value: 14 kW Operating voltage: 380/220 V The 24,000 m³/hour and 200 kW gas burner make this a serious, professional booth, not a hobby version. Fully functional; Burner and fan are operating; Filter system is complete; No significant rust damage. Internal length: approximately 6.70 m Internal width: approximately 4.0 m Internal height: approximately 2.5 m. The dimensions are approximate. External dimensions: 6.85 x 600 x 310 (approx.) The booth can be inspected, and it must be dismantled by the buyer. We will arrange for a forklift to load it.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: MKR30029343, MACHINE DETAILS Lhedpfx Aoy Tn Rkel Ieh Voltage: 400 V Frequency: 50 Hz Power: 6.2 kW FEATURES CE marking MAKOR unloader is not included in the scope of supply.

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. Lhodsyx Irlspfx Al Ish 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Lhsdpfx Aljulc S Rs Ioh

Condition: like new (used), functionality: fully functional, machine/vehicle number: 25C862, SHIPPING AVAILABLE 🚚 - Brand: Graco - Reference: 25C862-OC - UPC Code: 00755652654278 - General industry - sealants, adhesives, silicones - Application: Beading and encapsulation - Maximum flow rate: 9 L/min - Maximum working pressure: 207 bar - Air inlet: 1/2" - Mixing ratio 1:1 - Pressure ratio 36:1 - For 20 L drums - Second-hand product, fully inspected Lhedoza Utqopfx Al Ioh

Condition: like new (used), functionality: fully functional, machine/vehicle number: MD1001, total height: 150 mm, total length: 45 mm, total width: 52 mm, overall weight: 50 kg, PROMIX 2KS MIXER, 1 COLOR + 1 CATALYST + 1 AIR + SOLVENT SHIPPING AVAILABLE 🚚 -Brand: Graco -Reference: MD1001 -UPC Code: 633955370647 -General Industry: Paints and Glues Lodpfewp Slksx Al Ishh -Application: Two-component paints, solvent and water, glues, varnishes, lacquers. -Mixing close to the guns for greater control -Compatible with solvent- and water-based epoxies and polyurethanes -Mixing ratio up to 30:1 -Pressure: 275.6 bar (4000 psi) -Pre-owned, fully inspected -Warranty: 1 year -OPTIONAL: COLOR AND CATALYST CHANGE WITH CONTROL (PRICE ON REQUEST)

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Lsdpev Ed Uksfx Al Iehh Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 2000/80205, Complete powder coating line with automatic powder recovery. 1. WAGNER automatic spray booth – year of manufacture: 2000 Serial no.: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 units with rotation Type of operation: pass-through Entry size for coated parts: 100 x 158 cm 2. IMEL washer – external dimensions: 3 x 12 x 4.2 m (L-shaped) - Washer entry size: 72 x 144 cm - Water tank: 3 x 2.2 x 1.2 m - Capacity: approx. 6,000 liters (located under the washer) - Heating by Sant Andrea burner, model KB 40 GM with modulating capacity from 179 to 468 kW (gas burner) 3. WAGNER powder filtration system, dimensions: 1.5 x 3.2 x 5.5 m Lhedpfx Aeyrr Rqel Ioh 4. Overhead conveyor – length approx. 100 m, self-propelled 5. WAGNER powder recovery unit with cyclone 6. Oven (with 2 circuits) with gas burner 163 – 390 kW - One circuit for drying parts after washing - Second (longer) circuit for curing powder after application - Oven dimensions: 12 x 7 x 5.3 m; maximum coated part size: 60 x 120 cm Additionally, we have 2 oil burners of similar capacity as alternatives to the gas burners. Approximate installation footprint: 30 x 11 m.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, working width: 1,300 mm, working height: 110 mm, TECHNICAL DETAILS Max. working width: 1,300 mm Max. working height: 110 mm Min. working height: 8 mm EQUIPMENT Motorised feed rollers 2 brush units The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Ljdpfx Aljyqynus Ishh External reference: 7615

Condition: new, Year of construction: 2026, functionality: fully functional, This solution is an innovative development by 3K, designed as a compact yet highly efficient laboratory furnace system with dimensions of 1000 × 1000 × 1200 mm. The unit utilizes a 0.75 kW electric motor paired with a 200 mm diameter backward-curved impeller, ensuring optimized airflow within the chamber. This design delivers uniform air circulation, promoting consistent thermal distribution and reliable process outcomes throughout the usable volume. From an engineering perspective, the system achieves stable aerodynamic properties with reduced turbulence and energy loss, ultimately enhancing operational efficiency and reliability. In summary, this is a compact, durable, and thoughtfully engineered furnace solution that fuses precise airflow control with proven performance—an ideal choice for demanding laboratory as well as light industrial operations. Ledpey A Eb Sjfx Al Iohh

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for efficient air handling and ventilation applications. The offered machine is engineered for reliable operation and consistent performance in industrial environments. The cabin has overall dimensions of 2000 mm in length, 2050 mm in width, and 2850 mm in height. It is equipped with an electric motor rated at 3 kW, operating at a nominal speed of 2800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring smooth operation, low vibration, and high mechanical efficiency. Lhsdpfx Asygh Alel Ish The system is designed to deliver an airflow capacity of 4000 m³/h, providing effective air extraction and circulation for various industrial processes. The open-type cabin design allows unobstructed access, ease of maintenance, and optimized airflow distribution, making it suitable for ventilation, fume extraction, and general industrial air handling applications. All mechanical and structural components are manufactured in accordance with standard industrial engineering practices to ensure durability, operational reliability, and long service life. The unit is designed for continuous-duty operation and complies with typical industrial safety and performance requirements. This offer includes the complete machine as described above, fully assembled and ready for installation.

Condition: new, Year of construction: 2026, functionality: fully functional, We hereby submit our offer for the supply of a large open-type industrial cabin designed for high-efficiency air handling applications. The offered unit is engineered for continuous industrial operation and robust performance in demanding environments. The cabin has overall dimensions of 2,500 mm (length) x 2,250 mm (width) x 2,650 mm (height). It is equipped with a high-performance electric motor rated at 5.5 kW, running at a nominal speed of 2,800 rpm. The motor is directly coupled to a dynamically balanced centrifugal impeller with a diameter of Ø452 mm, ensuring stable operation, minimal vibration, and high aerodynamic efficiency. The system is designed for a maximum airflow of 7,000 m³/h, providing efficient air extraction and circulation for industrial processes. The open-type cabin configuration allows for easy access, straightforward installation, and optimal airflow distribution, making it ideal for applications such as ventilation, fume extraction, and general industrial air handling. All mechanical components are manufactured in accordance with standard industrial practices, ensuring durability, reliability, and long service life. The unit is suitable for continuous duty and complies with typical industrial safety and performance requirements. This offer includes the complete, fully assembled machine as specified above, ready for installation. Lodpfx Aljyghwie Iohh

Condition: new, Year of construction: 2026, An open-type industrial booth engineered for efficient air extraction and ventilation in professional and industrial environments. The unit features overall dimensions of 1269 × 1367 × 2379 mm and is equipped with an electric motor rated at 1.1 kW operating at 2800 rpm. Air movement is provided by a Ø315 mm impeller, delivering an airflow capacity of 2600 m³/h. The booth is designed for reliable continuous operation, ensuring stable airflow performance and effective extraction, making it suitable for industrial applications that require controlled ventilation and air handling. Ljdpfjyghnnsx Al Ishh

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Ljdpfx Aljyhbggo Iehh Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area - Floor area: 6.2 m²

Condition: new, Year of construction: 2026, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. Lodpfx Alsvv Rfko Ishh POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: new, Year of construction: 2025, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Lhjdpjvv H Hdjfx Al Ieh Made in Türkiye CE Mark We offer the best technical solutions and competitive prices Contact us for more information and quotations

Condition: as good as new (ex-display), Morgana AutoCut Pro – Showroom Model Location: United Kingdom Availability: In stock Condition: Excellent showroom model – serviced by a Morgana-trained engineer. Sheet count of less than 1500. Overview The Morgana AutoCut Pro is a high speed multi-function finishing system designed for busy digital print environments requiring professional cutting, creasing and finishing from one compact solution. The AutoCut Pro is capable of slitting, cutting, bleed trimming and creasing in a single pass, making it ideal for the production of business cards, greeting cards, invitations, flyers and promotional products. Equipped with Morgana’s upper-belt tri-suction feeding system, the AutoCut Pro provides reliable feeding across a wide range of digitally printed stocks whilst helping to reduce marking and sheet damage during production. The automatic feed table elevation system improves sheet separation and minimises mis-feeds. The intuitive touchscreen control system features PRESET, Manual Set and Flex modes, allowing operators to quickly produce standard applications or fully customise bespoke jobs with ease. Key Features Upper-belt tri-suction feeding system Slits, cuts, bleed trims and creases in a single pass Optional inline folding with Morgana AutoFold Sheet sizes up to 330 x 490mm Optional long sheet capability up to 330 x 700mm Up to 10 SRA3 sheets per minute Up to 5000 A4 sheets per hour with 1 crease 4” touchscreen operation 150 job recall memory Pre-set templates for common applications Flex mode for custom programming Skew adjustment Slide aligner Double feed detection Why Choose the Morgana AutoCut Pro? High speed cutting, creasing and finishing in a single compact system Ideal for business cards, greeting cards, invitations, flyers and promotional products Slits, cuts, bleed trims and creases in one pass for increased productivity Intuitive touchscreen controls with PRESET, Manual Set and Flex modes Reliable upper-belt tri-suction feeding system for digitally printed media Optional inline folding with the Morgana AutoFold Suitable for both digital and commercial print applications Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers Expert training and ongoing support – helping you achieve the best results from your equipment Competitive pricing on consumables – keeping your production costs low Trusted supplier – years of experience supplying print finishing solutions throughout the UK Specifications Manufacturer Morgana Model AutoCut Pro Condition Used Stock Number 114996 Lhedoy Uzbljpfx Al Ioh Max sheet size 330mm x 490mm (700mm with long sheet kit) Min sheet size 210mm x 210mm Paper weight 120gsm - 350gsm Operation 4" touch screen Feeder capacity 100mm Cutting tolerance +/- 0.2 - 0.3mm Double feed detection Standard Cut mark registration Standard Feeding mechanism Upper belt tri-suction Machine dimensions W840mm x D790mm x H1090mm Machine weight 200kg Power requirement 220VAC 50/60Hz

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Lhedpfx Aeyuubdel Ieh Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: like new (used), functionality: fully functional, A very nice Squarefold machine is for sale. Lhjdozcwvgjpfx Al Ijh Brand: Morgana, type: Documaster (Watkiss) Can be used as a hand-feed (offline) machine or inline with a booklet maker. Book thickness: 1-6.5 mm. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please request a price including transport (within the Netherlands). Best regards, Henk Hoos.

Condition: like new (used), functionality: fully functional, Watkiss SpineMaster – SquareBack Module for Saddle-Stitched Brochures Manufacturer: Watkiss Model: SpineMaster Type: SquareBack spine forming module for saddle-stitched brochures The Watkiss SpineMaster transforms conventional saddle-stitched brochures into brochures with a square spine (SquareBack), providing an appearance similar to perfect binding, while maintaining the security and strength of saddle stitching. It is the ideal solution for commercial and digital printers who want to offer a premium finish with added value. Key advantages: * Converts saddle-stitched brochures into brochures with a square spine. * Professional appearance similar to a bound book. Lodpfxezdyrle Al Ijhh * Possibility of printing on the spine. * Brochures are easier to stack, store, and transport. * Significant reduction in storage volume. * Complete opening of the brochure without damaging the spine. * Compatible with Watkiss brochure making systems and other brands through specific interfaces. Technical specifications: * Production: up to 1,320 brochures/hour (offline model) and up to 1,400 brochures/hour (automatic inline model). * Brochure thickness: from 1 mm to approximately 6.5 mm. * Maximum capacity: up to 30 sheets of 80 g/m² (120 pages). * Maximum format: up to 350 x 250 mm depending on configuration. * Manual feed or inline integration with brochure making systems. Applications: Ideal for: * Catalogs * Magazines * Manuals * Corporate brochures * High-quality digital printing * Short-run and personalized print jobs A robust and reliable machine, designed to increase the perceived value of printed jobs and differentiate from the competition with a high-quality SquareBack finish.

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Lhedpfezdc D Sox Al Ieh Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Year of construction: 2018, condition: used, The year of manufacture refers to the final acceptance of the system; individual components may differ in age. Workpiece dimensions up to a maximum of L x W x H: 8,000 x 2,000 x 2,000 mm, maximum crossbeam load: 2,000 kg/carriage, material: steel. Pos. 1: Washing booth, Jumbo-Clean with stainless steel interior for degreasing/phosphatizing of steel, either automated or with manual spray lance. Pos. 2: 1 set of belt filters. Ljdpfx Aljy T Nzds Iehh Pos. 3: 1 automatic spray ring for the Jumbo-Clean washing booth, including a central lance. Pos. 4: 1 fresh water treatment system. Pos. 5: 1 manual conveyor with 1 electric cross-travel carriage. Pos. 6: 1 lifting/lowering station, Jumbo-Lift 2000, integrated into the cross-travel carriage. Pos. 7: 1 indirect gas-heated flash-off oven/powder drying oven/wet coating drying oven, door opening W x H: 2,800 x 3,100 mm, clear length: 9,500 mm, overall W/H/L approx.: 4,000/5,000/10,000 mm. Pos. 8: 1 end-face powder coating extraction system for an on-site painting booth for spraying and drying operations. Pos. 9: 1 manual coating unit, OptiFlex(R)2. Pos. 10: 1 structure for on-site steel construction. Pos. 11: Control cabinet.

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Lsdpfxoy Tiaaj Al Iehh Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: ready for operation (used), Year of construction: 1998, Ernst Schnabel - ALFA Centrifuge, Model -CE marking -Year of manufacture: 1998 -Drum volume: 27 liters -Drum diameter: 400 mm Lhedpfxsy Uv Rhs Al Ish -Rotation direction: Clockwise -Permissible load: 25 kg Dimensions: L x H 0.7 x 1 meter / Weight: approx. 150 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, BDF Bourg document finishing system with manual feed for collated sets. Machine serviced, conveyor belts replaced, in excellent condition! Stapling-folding-trimming 2 stapling heads from wire coil Functions for saddle stitching, block stitching, and corner stitching Fully automatic format adjustment! Ledpfx Aozaay Nsl Iehh Electrical connection 230V/50Hz, 400kg Includes 4 wire coils Technical data attached as a PDF! Great opportunity at a fair price!