Used Hydromat for sale (74)

Condition: used, Year of construction: 2002, Article: Rotary transfer machine Manufacturer: Pfiffner Kdedpfxsy N Agre Aqgsl Type: Hydromat HB-32/45 Yob: 2002 Please, contact us for getting more information and pictures on mail(at) or *

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: HB32-305, Hydromat HB32/16, double cycle, year of manufacture 2020, location: LOGA Präzisionsteile GmbH, Himmelreich 4-6, 78554 Aldingen. Control: Bosch MTX, HME operating interface Coolant system: Knoll (oil), vacuum rotary filter, low-pressure and high-pressure pumps for internal tool cooling Machine table with 8 collet chucks and 8 two-jaw chucks 1x Stäubli robot for transferring workpieces from the first to the second clamping position 1x loading magazine, 4.2m 1x VE 40/80 sawing unit 8x feed units: VE 36/100 or VE 35/60 5x CNC 50/100 turning units 2x 3-axis CNC milling units Nordmann tool monitoring Pickup conditions: Kdjdpfx Aey Nkhdeqgel The machine base measures approximately 4 meters in length, 3 meters in height, and 2.5 meters in width. The weight is approx. 6 tons. The other components are demountable. The hall is very spacious. There is no crane runway; a forklift is required for disassembly. No forklift is available on site! The aisles are 3 meters wide. There is a large roller gate, and trucks can drive directly up to, or even through, the gate for loading.

Condition: used, Year of construction: 2013, Article: Rotary transfer machine Manufacturer: Pfiffner Type: Hydromat HB 32-45/16 CNC Yob: 2013 Electro-hydraulically controlled, fully automatic Kjdpfx Asruvaqsqgodl Extract from offer: Coolant system with chip conveyor and Knoll vacuum rotation filter High pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D - CNC / S7-PLC incl. modem (for teleservice) 1 bar loading magazine type IEMCA: bundle loader (yob. 2011) 1 Sawing unit: Saw blade D250mm 2 Feed unit VE 26/80-HSK: Spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 Vertical support 26/80 with 36° angular position 2 drilling head 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 Feed unit VE 36/100-HSK internal cooling: Spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 6 Drilling head 36/1000-HSK: HSK 40 2 CNC X-Y-Z turning device outside the collet disc: NC 26/100 pick-up unit; 2 deburring spindles 1 CNC horizontal cross slide 26100-HSK: X/Y stroke 1 CNC feed unit VE 36/100-HSK internal cooling: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 2 CNC turning unit 50/100-PSK: with ES-PDK-12 facing head (slide-in 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW 1 turning unit WDE 30/60 1 turning tube with insertion bar 3 chip breaker valve SBV-100 Tool monitoring Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, TECHNICAL DETAILS - Posts number : 12 - Table indexing : 12 x 30 [°] - Collet type : SCHAUBLIN W25 - Max. clamping diameter : 25 [mm] - Max. part length : 100 [mm] - Supply voltage : 3x 400 [V] - Installed power : 32 [kW] - Machine dimensions : 2700 x 2700 x 2500 [mm] - Weight : 4000 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Post 1, bucking Kodpsuhbwcsfx Aqgsdl - Post 2, longitudinal drilling 30/60 - Post 3, longitudinal drilling 30/60 - Post 4, CNC turning 2 axes - Post 5, turnaround - Post 6, radial drilling 30/60 - Post 7, CNC turning 2 axes - Post 8, inclined drilling 30/60 - Post 9, radial drilling 30/60 - Post 10, inclined drilling 20/50 - Post 11, radial drilling 20/50 - Post 12, longitudinal drilling 30/60 - Ejection between the posts 12 and 1 - Part band conveyor - Chip conveyor KNOLL 450 K-1/2000 - Lubrication tank KNOLL KTS-25-60-T - Pump HP : 40 [bar] - Filtration KNOLL VRF 500

Condition: used, TECHNICAL DETAILS - Posts number : 16 - Indexing time : 0,7 [s] - Max. bar diameter : 32 [mm] Kdodpfx Ajuhbwieqgol - Clamping type : collet VB 32 - Max. part length : 150 [mm] - Max. number of horizontal units : 16 - Max. number of vertical units : 24 - Max. number of all units : 24 - Electrical supply : 400 [V] - Installed power : 40 [kW] - Dimensions : 9,8 x 4 x 2,9 [m] - Weight : 6 500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 turning units CNC 2 axes - Band part conveyor - Chip conveyor - Lubricating tank - Filtration

Condition: used, TECHNICAL DETAILS - Number of axes : 48 - Number of posts : 16 - Number of units : - Number of possible horizontal units : 16 - Number of possible vertical units : 7 - Max. diameter : 45 [mm] - Max. part width : 150 [mm] - Basis unit GM50/150 : * Stroke Z : 150 [mm] * Spindle power : 5 [kW] * Spindle speed : 0 - 8000 [Rpm] - Slide X/Y : * Strokes X : +/- 40 [mm] * Strokes Y : +/- 20 [mm] - Dimensions : 14000 x 4800 x 3000 [mm] - Weight : 13 [t] - Number of hours : 4283 [h] Kedpfeu N Ivqex Aqgsdl EQUIPMENT - Control CNC Bosch Rexroth INDRAMOTION MTX-L85 - Post 1 : * sawing unit 52/100 3 axes - Post 2 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 3 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 4 : * slide 50/150 (manual adjustment) ref. 22.10.002-1 * unit 50/150 ref 22.42.001-6 (1 axis) * coolant through spindle - Post 5 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 6 : * slide CNC 50/150 ref 22.10.001-4 (2 axes) * unit CNC 50/150 ref 22.42.001-6 (with CNC turning function) * coolant through spindle - Post 7 : * slide 50/150 manual adjustment ref 22.10.002.1 * unit recessing ref 22.42.041.1 - Post 8 : * slide CNC 50/150 ref 22.10.001.4 (2001) * unit CNC 50/150 ref 22.42.001.6 (with CNC turning function) - Post 9 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.039.2 - Post 10 : * slide 50/150 manual adjustment ref 22.10.002.1 * recessing unit ref 22.42.039.8 - Post 11 : * slide CNC 50/150 ref 22.10.001.4 * unit 50/150 ref 22.42.001.6 (CNC turning function) - Post 12 : * slide 50/150 ref 22.10.002.1 * recessing unit ref 22.42.041.1 - Post 13 : * slide CNC 50/150 ref 22.10.001.4 * recessing unit ref 22.42.041.1 - Post 14 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) - Post 15 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Post 16 : * slide CNC 50/150 ref 22.10.001.4 * unit CNC 50/150 ref 22.42.001.6 (turning function) * coolant through spindle - Bar feeder length 4 m - Coolant tank KNOLL (2000 Liters) with HP pump 60 [bars] - Chips conveyor

Condition: used, Hydromat HB45-12 Kdjdpfx Ajyzkd Aoqgel SN 220291-81 12 Stations Capacity: 45mm Saw, Bar Feed, Inverter Configured as pictured (3-Axis CNC Slide, not included)

Condition: used, Number of boring spindles 5 St. Working width 250 mm Kdodpfsw R S T Aox Aqgol Working height 160 mm

Condition: good (used), Year of construction: 1997, LAMEL MOULDER WEINIG HYDROMAT 22 BL Maximum working width : 220 x 140 mm Kdjdpfx Aqjxa Hlksgel Spindle diameter : 50 mm Infeed : 30 Kw ( Separate Hydraulic station ) Seperate electric cabinet : L 2200 x W 600 x H 2000 mm 1. spindle : 5,5 Kw 2. 5,5 Kw 3. 7,5 Kw 4. 7,5 Kw 5. 7,5 Kw 6. 11 Kw 7. 15 Kw 8. 37 Kw 9. 7,5 Kw 10. 7,5 Kw Steel cage with gas pistons over machine. External pump for central lubrication( For 200 L lubrication oil barral ) 5 Europallets with spareparts/tools/extra spindles included

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL Kedpfx Asulnr Ajqgodl 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table

Condition: excellent (used), WEINIG HYDROMAT 22 AL four-sided planer - max. width of workpiece: 220mm - max. height of workpiece: 130mm - 8 spindles: 1) horizontal lower 220mm, 5.5kW 2) vertical right 130mm, 7.5kW Kdodpfx Asyyzcmeqgjl 3) vertical left 130mm, 7.5kW 4) vertical right 130mm, 5.5kW 5) horizontal upper 220mm, 11kW – 5th spindle electrically adjustable up/down 6) horizontal lower 220mm, 5.5kW 7) horizontal lower 220mm, 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360°, 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - top: - 6 infeed rollers, double-toothed, pulling + 1 single - 3 outfeed rollers, pulling, rubber, smooth double + 3 single - meter counter - bottom: - infeed roller, toothed, pulling, swiveling in the lower bed - 3 metal rollers, pulling, smooth - feed on Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the bed - diameter of extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg - Infeed conveyor with centering device: - roller width 450mm - 1 toothed pulling roller at the inlet - 22 smooth pulling rollers - adjustable top pressure - conveyor length 9020mm - stepless speed adjustment 10-60m/min - motor 0.75kW - dimensions L/W/H 9020x790x1150mm Net price: 179900 PLN Net price: 42850 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake Kodpjtynpxjfx Aqgodl - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) Kedpfowvqkljx Aqgodl • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), working width: 250 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 140 mm, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: hydraulic, type of input current: three-phase, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 100 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2-Right (9 kW) Kjdpoq Au Tlofx Aqgedl 3-left (11 kW) 4-Right (9 kW) 5-Top (15 kW)- with hydraulic clamping 6-Bottom (7.5 kW) - with hydraulic clamping 7-Top (7.5 kW) - with hydraulic clamping and straight jointer 8-Top (11 kW) - with hydraulic clamping and straight jointer 9-bottom (11 kW) - with hydraulic clamping and straight jointer 11 driven rollers in the table

Condition: ready for operation (used), Year of construction: 1998, A stationary Hess concrete block step tilting mold machine is available. Production area X/Y: 750mm/1500mm, production height: 300mm, board dimensions X/Y/Z: 1700mm/550mm/300mm, board material: aluminum, number of boards: 290, vibration stations: 2, vibration station type: HFZ 2500, vibration force: 89.5kN, available mold types: block step chamfer/block step Ortenau/deep curb, control system: Siemens PLC. Including transport conveyor with 180° turning device and two lifting devices, lifting ladder, transfer car, lowering ladder, board discharge, board cleaning and board buffer. The compact external vibrators were converted to load vibrators. This is a complete system with peripheral and conveyor units. Documentation vorhanden. An on-site inspection is possible. Kedpfx Aqjy Rtg Segodl

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Four-side planer Weinig Hydromat 23, finger jointing machine 8 spindles, Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, Feed: 7.5 kW / 6–36 m/min, Spindle arrangement: 1-Bottom (7.5 kW) 2-Right (7.5 kW) 3-Left (7.5 kW) with profile jointer 4-Right (7.5 kW) with profile jointer 5-Top (7.5 kW) with hydraulic clamping 6-Bottom (30 kW) with hydraulic clamping Kdsdpfoxqh E Hjx Aqgjl 7-Top (7.5 kW) with hydraulic clamping and straight jointer 8-Bottom (7.5 kW) with hydraulic clamping and straight jointer. Hard coating. Two powered rollers in the table.

Condition: excellent (used), Catalog number: 7715 TECHNICAL DATA - max. width of workpiece 220mm - max. height of workpiece 130mm - 8 spindles: 1) horizontal lower 220mm 5.5kW 2) vertical right 130mm 7.5kW 3) vertical left 130mm 7.5kW 4) vertical right 130mm 5.5kW 5) horizontal upper 220mm 11kW – 5th spindle adjustable electrically up/down 6) horizontal lower 220mm 5.5kW 7) horizontal lower 220mm 5.5kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) universal 220mm, adjustable 360° 7.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed rollers, toothed double rollers + 1 single - 3 outfeed rollers, smooth double rollers + 3 single - meter counter – from below: - infeed roller, toothed, driven, swiveling in the lower table - 3 metal rollers, driven, smooth - feed rate on Cardan rollers - rollers with pneumatic pressure - stepless feed rate adjustment + 2 speeds 10-60m/min - feed motor 10kW - electric setting of planing thickness - body lifting motor 0.75kW - central lubrication of the table - diameter of dust extraction nozzles 5x140mm, 3x 120mm - machine dimensions L/W/H 4680x1780x1850mm - control cabinet dimensions (on pallet) 1020x1000x2230mm - weight approx. 5000kg ADVANTAGES – with 8 heads Kdsdpfx Aqey Ry Uijgsl – universal spindle – ideal for wet and dry wood – German production, WEINIG brand – unpainted – very few operating hours – used planer, in perfect condition Net price: 145900 PLN Net price: 34750 EUR depending on the exchange rate of 4.2 EUR (Prices may change due to higher fluctuations)

Condition: good (used), Year of construction: 1997, Four-side planer Weinig Hydromat 23 8 spindles, Machine Number : 023 - 2998 Working width: 230 mm, Working height: 160 mm, Spindle diameter: 50 mm, InFeed: Separat hydraulic station ( 15 Kw ) Spindle arrangement: Profiled driven steel roller, before first spindle 1-Bottom (22 kW) (2 x profiled driven steel roller between 1. and 2. spindle) 2-Bottum (7.5 kW) 3-Right (7.5 kW) 4-Left (11 kW) ( 1 x driven steel roller between 4. and 5. spindle ) 5-Top (26 kW) 6-Bottom (37 kW) ( 1 driven steel roller between 6. and 7. spindle ) 7-Bottum (7.5 kW) 8-Top (11 kW) ( 1 x Driven steel roller after 8. spindle ) All 8 spindles mounted with tools Hard coated table Total number of driven roller in the table : 7 Pc. Total Kw : 136 2 Euro pallets with extra infeed rollers/spareparts/tools included. Separat electric cabinet Separat control cabinet with digital inverter Kdjdoy Iwrtepfx Aqgel

Condition: good (used), Weinig add-on feed gearbox for short pieces. Suitable for Weinig Unimat, Profimat, Hydromat, Powermat. Used condition. Ksdoy N Elkspfx Aqgjdl

Condition: used, Year of construction: 1979, functionality: fully functional, working width: 250 mm, planing height: 160 mm, spindle diameter: 50 mm, planing width: 250 mm, working height: 160 mm, overall weight: 10,000 kg, power of feed motor: 30,000 W, spindle speed (max.): 6,000 rpm, height adjustment type: mechanical, planer shaft diameter: 50 mm, type of input current: three-phase, table length: 1,000 mm, number of spindles: 9, input frequency: 50 Hz, Weinig Hydromat 25 9 spindles, Working width: 250 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 30 kW / 6 - 65 m/min, Spindle arrangement: 1-bottom (11 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-left (11 kW) Jytnaq 4-Left (7.5 kW) 5-Right (7.5 kW) 6-Top (7.5 kW) - with hydraulic clamping 7-Top (15 kW) - with hydraulic clamping and straight jointer 8-Bottom (11 kW) - with hydraulic clamping and straight jointer Ksdpfx Aqoqvml Rogsdl 9-bottom (11 kW) - with hydraulic clamping and straight jointer 8 driven rollers in the table

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm Kdjdotkt Tpjpfx Aqgjl • Extraction hood above the machine

Condition: good (used), Year of construction: 1989, functionality: unexamined, working width: 220 mm, planing height: 120 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 120 mm, overall weight: 7,500 kg, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 10, power: 105 kW (142.76 HP), input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Hydromat 22 B With grooved bed 10 spindles, Working width: 220 mm, working height: 120 mm, spindle diameter: 50 mm, Feed rate: 7.5 kW / 8- 40 m/min, Spindle arrangement: Kdodou Udd Sepfx Aqgjl 1-bottom (7.5 kW) - with hydraulic clamping 2- Right (7.5 kW) 3-Left (11 kW) 4-Right (7.5 kW)- with straight jointer 5-Left (7.5 kW) 6-Top (15 kW) - with hydraulic clamping 7-Bottom (7.5 kW) - with hydraulic clamping 8-Top (7.5 kW) - with hydraulic clamping and straight jointer 9-bottom (7.5 kW) - with hydraulic clamping and straight jointer 10-Uni (7.5) 6 driven rollers in the table

Condition: excellent (used), Weinig Hydromat 23C with 6 Spindles. Max width 245mm Max Thickness 160mm Separate electrical panel. Separate remote control panel Automatic lubrication system for bedplates Full heavy duty sound enclosure. 15kW feed motor 100m/min No 1.  11kw - Bottom 6000rpm straight jointer prepared No 2. 11kw - Right 6000rpm straight and profile jointer prepared No 3. 15kw - Left 6000rpm straight and profile jointer prepared No 4 . 15kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared No 5 . 30kw - Top 6000rpm + Outboard bearing + straight and profile jointer prepared Kodpsyl Rmqsfx Aqgsdl No 6 . 15kw - Bottom 6000rpm + Outboard bearing + straight and profile jointer prepared 50mm spindles Beam 0.55kW Full documentation included. Heavy duty sound enclosure. Possible to supply with hydro tooling if needed. Possible to supply with full mechanisation if needed.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, working width 300mm working height 140mm Kdjdey N N U Njpfx Aqgol feeding rate 200m/min spindles speed 6000 RPM spindles diameter 50mm spindles set: 1. bottom - 22kW 2. top - 22kW 3. right - 18,5kW 4. left - 18,5kW 5. right - 18,5kW 6. left - 22kW 7. top - 22kW 8. bottom - 22kW 9. top - 22kW 10. bottom - 22kW 11. bottom - 22kW Possibility to purchase the machine with feeder + EUR 17,900 net.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Kodpfx Aqey Sgzxogsdl Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED