Used Homag Solid Wood Sanding Line for sale (18,479)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Bodpjyw Ndmjfx Aafedc Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: excellent (used), Year of construction: 2006, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Bdjdpfx Aeyw Aiceafec Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test.

Condition: excellent (used), Year of construction: 2010, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 + STACKER Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 155mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Available immediately. Possible to test. Bedpsw Anc Esfx Aafjdc

Condition: excellent (used), Year of construction: 2012, I sell the complete line for production of solid wood panels. Manufacturer: KALLESOE MACHINERY AS Modell: LHF6114 + KL30 Maximum possible input length: 1800mm Press width maximum 525mm (useful between appr. 480-520mm) Minimum and maximum slat width: max. 35mm x 80mm and 16mm x 135mm Glue: Danafix 446 Maximum possible output length: 1800 mm - 6000 mm Bedpfx Aevw Eh Nsafedc Available immediately. Possible to test.

Year of construction: 1991, condition: used, Used machine Year of manufacture: 1991 With 4 sanding units Workpiece dimensions: Thickness min. 10 mm max. 150 mm Width min. 10 mm max. 180 mm Length min. 190 mm, max. unlimited Abrasive belt dimensions: 200 x 1800 mm Extraction ports 2 extraction ports 80 mm Bjdsw Tfxdspfx Aafsdc 4 extraction ports 120 mm Required air velocity: 30 m/sec L x W x H: 3400 x 1150 x 1805 mm Weight: 2400 kg Availability: short term Location: Odenwald

Year of construction: 2010, condition: excellent (used), I sell the complete line for production of solid wood panels. Bsdpfx Asg D Uuqoafodc Product size max. 2600X2100mm Complete line consists of: 6-spindle Weinig Unimat fourside moulder Cross chain conveyor Automatic Glue spreading unit with cycle programming Entry table before the press Italpresse GB/13 Super Press size 2600mm (Parallel dimension / element length) x 2100mm (Cross dimension / Working width) Output table with rollers and cross chain outfeed conveyor Available as a complete line or sellable also separately. Because of that, the price is on agreement. Available immediately. Possible to test. Suitable also for another jobs. Products like parquettes, floor inputs, etc.

Condition: good (used), Year of construction: 2003, functionality: fully functional, VIET CHALLENGE 333 TM + VALERIA 3CCC Inf Minimum thickness: 3.0 mm Maximum thickness: 160 mm Maximum width: 1350 mm Minimum length: 250 mm Abrasive belt size: 1400x2620 mm Rollers: 3 + 3 (rubber) Surface cleaning system with brush and air on both sides Maximum feed speed: 20.5 m/min Can operate in 4 different modes: 1. Both machines – all 3 rollers driven on each machine 2. Both machines – only the last 2 rollers driven on each machine 4. Machine with top contact – all 3 rollers driven or only the last 2 rollers Bdedpfx Aow A Ng Esafoc Tolerance: 0.2–0.3 mm for a panel with 1250 mm width Roller configuration: Machine 1 – Bottom sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 Machine 2 – Top sanding: First roller: 18.5 kW, hardness 60 Second roller: 15 kW, hardness 40 Third roller: 11 kW, hardness 24 The machine is assembled and can be tested.

Condition: used, Year of construction: 2002, functionality: fully functional, Homag Profi Line CHF 51/32/32 Panel Saw - Year of manufacture: 2002 Bdodsx Ey Nvopfx Aafec - Cutting width: 3200 x 3200 - 3 tables with air curtain - Saw projection: 102 mm - Cutting height: 85 mm - Main blade 400 mm - Main motor 11.2 kW (15 HP) - Incisor blade with independent motor

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Application Types Bdjdpfx Aajx D Dq Sjfec Complete Production

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, feed rate X-axis: 35 m/min, controller model: Power Control Steuerung PC22 mit SPS Steuerung, workpiece weight (max.): 50 kg, working height: 950 mm, Auction of an edge banding line! The line consists of the following machines: - BARGSTEDT O TSH200/D/30/12 - HOMAG OPTIMAT KFL 525/M1/C - HOMAG OPTIMAT TDL 510/C turntable - HOMAG OPTIMAT KFL 526/M2/C - HOMAG OPTIMAT TDL 510/C turntable - Wandres cleaning brush - BARGSTEDT O TSH200/D/30/12 HOMAG OPTIMAT KFL 525/M1/C TECHNICAL DETAILS Feed speed: 15–35 m/min Edgebanding capacity: Min. thickness: 0.6 mm Max. thickness: 3 mm Max. width: 30 mm Workpiece dimensions: Thickness: 12–40 mm Min. size: 250 × 240 mm Max. size: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT KFL 526/M2/C Max. feed rate for panel processing: 30 m/min Max. feed rate for edge processing: 25 m/min Workpiece dimensions: Thickness: 12–40 mm (L/W) min.: 250 × 240 mm (L/W) max.: 2,500 × 1,200 mm Weight: 50 kg Panel overhang: 30 mm Working height: 950 mm MACHINE DETAILS Control: Power Control PC22 with PLC control HOMAG OPTIMAT TDL 310/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TDL 510/C TECHNICAL DETAILS Feed: Steplessly adjustable Working height: 950 mm +/- 50 mm HOMAG OPTIMAT TBH 200/D/30/12 TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm HOMAG OPTIMAT TSH 200/D/30/12 Bedpfsyghwcex Aafodc TECHNICAL DETAILS Workpiece dimensions: Min. workpiece size: 240 × 240 × 12 mm Max. size, single track: 3,000 × 1,200 × 60 mm Max. size, double track: 3,000 × 550 × 60 mm Max. workpiece weight: 50 kg Max. stack weight: 3,500 kg Overlay overhang: 0 mm on all sides Protective boards: Min. protective board size: 800 × 240 × 19 mm Max. protective board size: 3,000 × 1,200 × 60 mm Note: More detailed information regarding the configuration of individual components can be found in the attached order confirmations.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Bdodpox Twcpjfx Aafjc

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Bjdpfx Aaswyda Ujfedc Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: excellent (used), functionality: fully functional, PALLET CRUSHING LINE : 2 Shredder 2 conveyors with magnetic drum for nail removal. Bsdsy Dpnxspfx Aafodc Used only 200 hours AMIS shredder and 30 hours RUBUST shredder. Like a new and good price.

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Position 2: Top Sanders VIET-S3 - VALERIA Bdjdpfjx A Tayox Aafjc

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Bedpsywafnsfx Aafjdc Position 2: Top Sanders DMC-UNISAND K-I

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Bdjdpfob Evnksx Aafsc

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: Bedsyfg Rlopfx Aafedc - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Technical data: Wood infeed length: 150–700 mm Wood width: 40–150 mm Wood thickness: 20–50 mm Press length: 6100 mm Pressing force: 120 kN / 12 t Milling spindle power: 15 kW Chipper power: 5.5 kW Glue application system: Flankenjet / Glue nozzle Performance: Bjdpoy N D A Usfx Aafsdc Tenoner – 2 bundles per minute Press – 2 cycles per minute

Condition: excellent (used), Year of construction: 1998, operating hours: 1,830 h, functionality: fully functional, Please submit your price offers. Schroeder solid hardwood flooring production line. It has only operated for 1830 working hours (1 year with one shift). Fully functional, with a working speed of 30 m/min. The line consists of: Feeder, Planer I, transfer, Planer II, transfer/turntable, End matcher. Dimensions of the processed elements: width 45-100mm, thickness: 10-23mm, length: 250-1200mm. Bdjdpfsywkdzex Aafec

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Bodpfsvxqh Djx Aafjdc Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Bodpfsx D Rh Rex Aafedc Application Types Complete Production

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day - Line consists . 1. Sand Blasting line Bjdohtlw Rjpfx Aafodc 2. Electrostatic painnting line

Year of construction: 2018, condition: ready for operation (used), This MAYPRO LC2 was manufactured in 2018. It features an industrial PC with proprietary software, PLC integration, and can produce up to 2,000 pallets per 8-hour shift. Minimum and maximum pallet dimensions are 600 mm x 600 mm and 1,500 mm x 1,500 mm, respectively. It includes an automated wood feed system, multi-head nailing, and an integrated stacking system. Total installed power is 20-40 kW. Contact us for more information about this machine. Application Types Complete Production Bdsdpfx Aaox Hlh Tsfoc

Condition: like new (used), DEMONSTRATION MACHINE For sale is an as-new JET double drum sander DDS-237, equipped with a powerful 400V motor with 7.5 HP and a maximum sanding width of 940 mm. This demonstration unit is in excellent condition. Technical Specifications - Motor: 400 V / 7.5 HP - Drum speed: 1,400 rpm - Feed speed: 3 m/min - Maximum sanding width: 940 mm - Sanding thickness: 0.8 to 133 mm - Minimum workpiece length: 230 mm - Sanding drum dimensions: 152 x 940 mm each - Sanding belt width: 75 mm or 100 mm - Dust extraction port: 2 x diameter 100 mm - Dimensions (LxWxH): 1,090 x 1,420 x 1,090 mm - Weight: 440 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale. Shipping via haulage company: Austria: €180.00 incl. VAT Germany: €210.00 incl. VAT South Tyrol: €240.00 incl. VAT Related terms: JET DDS-237, double drum sander, wide belt sanding technology, wood finishing, 7.5 HP drive, 400V industrial, 940 mm working width, feed system, workshop machine, professional sanding equipment Bdjdjycc R Nspfx Aafec Reference: R-A0117

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Bedpfx Ajyhzhheafsdc Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2