Used Homag Bubbling Unit for sale (30,937)

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -with 2 motors for cleaning from above and below Iiedpfx Aajb Sgzds Ioc -with oscillation -Swivelable - laterally adjustable -Height: adjustable -Number: 1x aggregate available -Dimensions: 400/370/H470 mm -Weight: 35 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -Finish unit: from BRANDT KM 35 edgebanding machine -Motor: ATB 0.25 kW -Speed: 2820 rpm - laterally adjustable -Height: adjustable Iiodpfxogy T I Ee Aa Iec -Dimensions: 480/250/H490 mm -Weight: 29 kg

Year of construction: 1994, condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, plastering unit Iisdpeu N Sggofx Aa Ioc -Manufacturer: Paul OTT, Finishing unit from edgebanding machine U 206 -Type: KEO-04 -Motor: 0.3 kW -Speed: 1450 rpm - laterally adjustable -Height: adjustable -Number: 2 units available Price: per piece -Dimensions: 400/280/H660 mm / 480/290/H660 mm -Weight: 35 kg/ 36 kg

Condition: good (used), Finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing wheel for removing glue residue from PVC edges -Motor: 0.18 kW -Speed: 1400 rpm - laterally adjustable -Height: adjustable Iodpfx Aob Sc Srja Ioic -Number: 1x aggregate available -Price: per piece -Dimensions: 270/440/H600 mm -Weight: 31.5 kg

Condition: excellent (used), Year of construction: 2018, Specification Length: 4605mm Workpiece Thickness: 40mm Edge Material Roll: 0.4 – 3mm Edge Material Strip: 0.4-3mm Feed Speed 8m/min Joint Trimming Unit 40mm Quick Change Application Unit Magazine for Coiled Material Pneumatic 2 point adjustment Pressure Zone End Trim Unit with Pneumatic Adjustment Pneumatic Adjustment Fine Trim Contour Trimming Unit Iedpfx Aaozdklcs Ieic Pneumatic Adjustment Profile Scraping Unit Glue Joint Scraper Buffers LED Indoor Lighting EasyTouch Control System Manual Central Lubrication Manual Top Pressure Adjustment Roller Top Pressure

Condition: excellent (used), Year of construction: 2018, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Workpiece thickness 8-56mm Iisdpfxozdki Uj Aa Iec Powertouch screen Woodwop for machine Energy Saving Mode

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) Ijdpfx Aaszc Rzpo Ieic with  Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025)

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, total height: 2,100 mm, total length: 6,700 mm, total width: 1,050 mm, empty load weight: 3,500 kg, Equipment: CE marking, TECHNICAL DETAILS The machine has the following configuration: 1. Unit: Nordson pre-milling unit (tools included) Isdpfxozdzmks Aa Ijic 2. Unit type: Gluing unit 3. Unit type: Pressure rollers (tools included) 4. Unit type: Rough milling unit 5. Unit type: Cut-off unit 6. Unit type: Fine milling unit MACHINE DETAILS Number of units: 6 Voltage: 400 V Power consumption: 41 A Fuse: 50 A Dimensions (L x W x H): 6,700 x 1,050 x 2,100 mm Weight: 3,500 kg Transport packages: 5 EQUIPMENT CE marking

Condition: used, Year of construction: 2007, total height: 1,200 mm, total length: 3,600 mm, total width: 1,480 mm, Colour: Grey - Machine available from: 2025-12-15 - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes Iisdpfx Aasx Ei Sye Ijc - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (l x w x h) - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, machine/vehicle number: Profi-HPP300/43/43, functionality: fully functional, operating hours: 4,134 h, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 3,200 mm, workpiece length (max.): 3,800 mm, HOMAG SAWTEQ S-300 profile line CNC panel dividing saw (Profi-HPP300/43/43) with a large touchscreen and a maximum speed of 150 m/min. Specifications Manufacturer: Homag GmbH (Germany) Type: SAWTEQ S-300 profile line Design: CNC panel saw Configuration: Profi-HPP300/43/43 Year of manufacture: 12-2023 Serial number: 0-240-87-3107 Control: large touchscreen Capacity/max.: 3,200 x 3,800 x 5,600 mm Speed: 150 m/min CE: yes Design/features Clamping bar Additional loose blades Ball-roller table with air jets Dust extraction pipes Receipt printer Homag/Pica Machine manuals available Recorded operating hours: Number of cuts: 31,843 Iisdpfx Aozd Dlisa Ioc Operating time: 4,134.18 hours Main operating time: 587.18 hours Condition Used Has already been professionally disassembled and moved by Kisjes Transport Apeldoorn (using a combination vehicle). Dimensions Assembled: 645 x 831 cm Photos Photo 1 to 21: assembled installation at its original location Photo 21 to 51: disassembled installation at the current storage location Auction information

Condition: ready for operation (used), Year of construction: 2018, cutting length (max.): 4,300 mm, Panel saw manufactured in 2018. This HOMAG PROFI HPP 300 / 43 / 43 features a cutting length of 4,300 mm and a cutting width of approximately 4,250 mm. It has a maximum saw carriage feed speed of 130 m/min and a maximum saw blade diameter of 350 mm. If you are looking to get high-quality panel cutting capabilities, consider the HOMAG PROFI HPP 300 / 43 / 43 machine we have for sale. Contact us for further details. • Cutting width (programmable pusher): approx. 4,250 mm • Max. saw carriage feed speed: 130 m/min (optional up to 150 m/min) • Saw blade projection: 80 mm (optional 95 mm) • Max. saw blade diameter: 350 mm • Main saw blade diameter: 350–380 mm (depending on configuration) • Main saw motor: 11 kW • Scoring saw motor: adjustable, 1.5–2.2 kW Iiodpjzdignjfx Aa Ijc • Clamps: 7 units (2-finger design) • Control system: CADMATIC 4.1 / 4.5 or powerTouch (depending on configuration) • Total connected load: approx. 18.4 kW • Compressed air: 6 bar • CE marking: Yes • Stack height: up to approx. 80 mm (standard) • Extraction capacity requirement: approx. 3,350–5,230 m³/h • Processing: Single panels and stack cuts

Condition: ready for operation (used), Year of construction: 2017, overall weight: 3,800 kg, Edgebander manufactured in 2017. This HOMAG Optimat KDF 440 C features a workpiece thickness capacity of 8 - 60 mm and edge material compatibility of 0.4 - 8 mm. It offers a variable feed speed of 8 - 18 m/min and includes several units for joint trimming, glue application, and corner rounding. If you are looking to get high-quality edge banding capabilities, consider the HOMAG Optimat KDF 440 C machine we have for sale. Contact us for further details. • Condition: Used • Workpiece thickness: 8–60 mm • Edge material: 0.4–8 mm (depending on unit configuration) • Feed speed: 8–18 m/min (variable) • Min. workpiece length: approx. 120 mm Ijdozdidajpfx Aa Ioic • Min. workpiece width: approx. 60 mm • Glue application: EVA hot-melt adhesive; PUR-compatible (optional) • Glue pot: Teflon-coated; quick-change capability • Total connected load: approx. 15–20 kW (depending on configuration) • Compressed air requirement: 6–7 bar • Control system: powerControl / powerTouch • CE marking: Yes • Unit configuration: • Joint trimming unit • Glue application unit • Pressure zone • End trimming unit • Top/bottom trimming unit • Corner rounding unit • Scraper unit • Buffing unit

Condition: used, Year of construction: 2007, total height: 2,200 mm, total length: 7,500 mm, total width: 1,500 mm, Weight: 4.000 kg Price: On request - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: - Number of units [pcs]: 8 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: No - └ 7th unit type: Flat scraping unit - - Tools available: Yes - └ 8th unit type: Brushing unit Ijdpfjyzp Akjx Aa Isic - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 46 - Fuse [A]: 63 - Transport dimensions: 7500mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 4000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, total height: 1,895 mm, total width: 1,980 mm, overall weight: 1,580 kg, spindle motor power: 5,000 W, product length (max.): 2,950 mm, spindle speed (max.): 24,000 rpm, This 3-axis HOMAG WEEKE OPTIMAT BHX 055 was manufactured in 2018. It features a workpiece length capacity of 200 - 3,050 mm and a workpiece width of 70 - 850 mm. The machine includes 13 vertical drilling spindles and 4 horizontal drilling spindles, providing versatile machining capabilities. If you are looking to get high-quality CNC processing capabilities, consider the HOMAG WEEKE OPTIMAT BHX 055 machine we have for sale. Contact us for further details. Used Vertical CNC Machining CenterBrand: HomagType: Optimat BHX055Year of manufacture: 2018Technical data • Vertical CNC drilling and machining center • Workpiece length 200 - 3,050 mm • Workpiece width 70 - 850 mm • Workpiece thickness 12 - 60 mm • Milling spindle 1 unit • Main spindle power 5 kW • Max. speed 18,000-24,000 rpm (depending on configuration) • Tool holder HSK-F63 or ETP25 • Tool changer 4-position magazine • Vertical drilling spindles 13 • Horizontal drilling spindles (X) 4 • Horizontal drilling spindles (Y) 2 Iisdpszc R Hfsfx Aa Ioc • Grooving saw X-direction • Control system Homag powerTouch / Power Control PC 86 • Software WOODWOP 7.x • Total connected load 11.5 kW • Compressed air requirement 7 bar • Machine weight approx. 1,580 kg • Footprint (L × W × H) approx. 2,950 × 1,984 × 1,895 mm • CE markingNote:The technical data and descriptions are copies of the original order confirmation. This information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: 0-250-95-6951, functionality: fully functional, operating hours: 682 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, working width: 1,415 mm, spindle motor power: 10,000 W, working length: 3,100 mm, 2017 HOMAG Weeke Venture 115 CNC machining centre in excellent condition. Lightly used machine with very low spindle hours for age. Moved once since initial install. Machine is currently installed, calibrated, and available for inspection under power. - 10kw spindle - 18 position drill block with grooving saw Iedoy S Dfbspfx Aa Ioic - Multipurpose saw 118mm cut depth - 22 position tool change capacity - Pod & Rail Table with LED positioning indicator This is a clean, well-kept machine from a low-use environment, not a hard-worked production machine. Important point on specification: the machine is 5-axis capable, but the additional 5-axis software licence is not included in the sale. This can be added via Homag at additional cost if required. Buyer responsible for decommissioning, loading, transport and insurance. Machine available for demonstration in situ by appointment.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 1,651 h, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, HOMAG KAL 310 + panel return system TFU 140! TECHNICAL DETAILS Profile milling unit FK11 manual Edge thickness: max. 3 mm Motors: 2 units Motor power: 0.4 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Feed speed: max. 20 m/min Feed speed for continuous trimming without profile trimming: max. 30 m/min Iodpfxoyzxa Ee Aa Ioic Panel length single-sided: min. 240 mm Panel length double-sided: min. 120 mm Panel thickness: 12 - 60 mm Panel spacing with PC22: min. 500 mm Minimum workpiece gap for workpiece thickness over 22 mm: min. 600 mm Multi-scraper MN21 Automatic Number of profiles: max. 5 different profiles Edge thickness: max. 3 mm Panel thickness for radius R = 3 mm: min. 13 mm Panel thickness for bevel 0.5 x 45°: min. 10 mm TC knives: 2 units Bevel angle: 20° Radius: R = 1.5 / R = 2 / R = 3 / R = 5 Pre-milling unit BF10 Motors: 2 units Motor power: 0.55 kW per motor Frequency: 200 Hz Speed: 12,000 rpm Swivel range: +/- 1° TC cutter: 70 x 25 mm HSK: 25 Cutting angle: 54° Feed speed: 18-25 m/min Workpiece thickness: 8-60 mm Edging material (roll): 0.3-3 mm MACHINE DETAILS Operating hours Operating hours: 6,358 h Feed time: 1,651 h EQUIPMENT Pre-milling Automatic adjustment of the infeed fence Infeed device with 2 rollers Quickmelt application station 2-roller magazine infeed Automatic adjustment of the pressure zone HL84 end trimming unit with pneumatic adjustment BF10 flush milling unit with pneumatic adjustment FK11 profile milling unit MN21 multi-profile scraper unit for 5 different profiles Grooving unit Glue joint scraper Buffer Return system TFU140

Condition: excellent (used), Year of construction: 2021, Used HOMAG Drillteq V-200 - Year of manufacture: 2021 - Immediately available - Excellent condition - Tools can be included for an additional charge. Ijdpfx Aozdvuvsa Isic Please feel free to contact us if you have any questions.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 16 kW (21.75 HP), input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,150 mm, overall weight: 1,350 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Brandt-Homag KDF 220 Highflex edge banding machine, year of manufacture 2012 from a small carpentry business Last inspection: March 20, 2026 Type: KDF 220 Machine number: 0-261-20-6136 Wiring diagram number: 0-261-20-6136 Year of manufacture: 2012 Supply voltage: 400Y/230 Units controlled via the display Gluing unit: 2 x 2.2 kW Trimming saw unit: 2 x 0.18 kW Flush trimming unit: 2 x 0.27 kW Profiling milling unit: 2 x 0.35 kW WD 40 -additional function: structural base Radius draw knife Straight draw knife Edge thickness: 0.4 - 6 mm Fsbq Uvmsyy S Ade Rnjph Workpiece thickness: 8-60 mm Feed rate: 11 m/min Isdszdb Ivepfx Aa Isic Total power: 16 kW Length: 4150 mm If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, Used CNC machining center Manufacturer: Homag Type: BOF 311/40/F/K Year of manufacture: 2007 Special features: 5-axis spindle with 15 kW "Drive 5+" (incl. vibration sensor) Workpiece thickness 300 mm incl. clamping device WoodWop 8.0 incl. Windows 7 computer 5-axis CNC cross-support machine; Cantilever table with 8 adjustable consoles, each with 2 suction cups, side and longitudinal stop bolts, LED position display for vacuum suction cups 6 sets of extraction rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece length: All units individually 4000 mm, pendulum max. 1550 (1375) mm Workpiece diameter 25 mm: individually 3475 mm, pendulum max. 1915 mm -Workpiece width: stop at the front: 1450 mm for all units / 1525 mm with workpiece diameter 25 mm Stop at the rear: up to 1600 mm / 1730 mm – Workpiece thickness: – Max. 300 mm including clamping device – Up to max. 60 mm with standard clamping device SAFETY AND PROTECTION DEVICES: EC compliant; SAFETY GUARD ON THE RIGHT WITH DOOR Iodpjzdydzofx Aa Ijic Left and rear: wall installation! Support equipment: 15 kW Drive5+ spindle and 30-position tool changer (chain) up to 24,000 rpm, vibration sensor Pick-up location for saw blade 350mm diameter Drilling head with 25 spindles (V19/H6/S0/90°) AGGREGATE INTERFACE DRIVE5+ Chip conveyor belt TOOL TRANSFER LOCATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 140 M3/H Control system: POWERCONTROL PC85 with PLC CONTROL SYSTEM; WoodWop Version 8.0 WOODWOP-CAD/CAM INTERFACE STANDARD DOCUMENTATION AND CONTROL SYSTEM TEXTS: GERMAN Delivery includes only the tools and HSK tool holders shown in the pictures!

Condition: used, machine/vehicle number: 008627, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Iedozakdfepfx Aa Ioic Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, operating hours: 7,610 h, input voltage: 400 V, input current: 10 A, total height: 1,650 mm, total length: 4,400 mm, total width: 1,000 mm, TECHNICAL DETAILS Overall height: 1,650 mm Overall length: 4,400 mm Overall width: 1,000 mm Color: Gray Operating hours: 7,610 MACHINE DETAILS Weight: 2,500 kg Year of manufacture: 2018 Documentation available: No CE marking present: Yes CE certificate available: No Serial number: Itsbn Dztwjy Ewv Tj Tsg Voltage: 400 V Power consumption: 10.3 A Fuse: 16 A Transport dimensions: 4,400 mm x 1,000 mm x 1,650 mm (l x w x h) Transport weight: 2,500 kg Transport packages: 1 EQUIPMENT Pre-milling unit Gluing unit Pressure rollers Cutting unit Rough milling unit Radius pulling unit Iijdpfx Asy Tnuvja Ioc Corner rounding unit Surface pulling unit Brushing unit

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 4,300 mm, travel distance Y-axis: 2,250 mm, travel distance Z-axis: 400 mm, spindle motor power: 10,000 W, spindle speed (max.): 24,000 rpm, number of axes: 3, This 3-axis HOMAG WEEKE BHP200/VANTAGE714 CNC Machining Centre was manufactured in 2013. It features an impressive working area with an X-axis of approximately 4300 mm and a Y-axis of around 2250 mm. The machine is equipped with a powerful 10 kW spindle capable of reaching up to 24,000 RPM and includes a 14-position automatic tool changer. If you are looking to get high-quality CNC routing capabilities, consider the HOMAG WEEKE BHP200/VANTAGE714 machine we have for sale. Contact us for further details. Ijdpfx Aaozatdbs Ijic • Series: Weeke Vantage 200 platformElectrical specs (from plate) • Supply: 415Y / 240 V • Phases: 3-phase • Frequency: 50 Hz • Full load current: 61 A • Recommended fuse: 80 A • Control voltage: 24 VSpindle • Tool interface: usually HSK-F63 • Tool change: automaticAxes • Servo-driven gantry systemTool changer • 14-positionDrilling block • Vertical drills • Horizontal drills • Grooving sawTable type • Flat nesting vacuum table • MATRIX table variants • Zoned vacuum system • Automatic vacuum controlController / software (usually paired with) • HOMAG Power Control / Homatic 2000 IPC • WoodWOP software • MCC production software

Condition: used, Year of construction: 2013, total height: 2,100 mm, total length: 9,000 mm, total width: 1,050 mm, Weight: 6.000 kg Price: On request - Details: - └ Description: Not working: Several loose sensors and the glue bin has been disassembled, machine has not yet been tested - Year: 2013 - Documentation available: No - CE certificate present: No - Serial number: - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - - Type/Brand: Nordson Iiedpfx Aaoyrp Uao Ijc - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: No - └ 5th unit type: Rough milling unit - └ 6th unit type: Milling unit - └ 7th unit type: Fine milling unit - └ 8th unit type: Milling unit - └ 9th unit type: Milling unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 69 - Fuse [A]: 80 - Transport dimensions: 9000mm x 1050mm x 2100mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Machine dimensions 1085 x 180 x 235 cm (with opened doors) Iiedpfx Aajy A I Sge Isc

Condition: used, Year of construction: 2021, functionality: fully functional, 1. unit steelroller Ø140 mm 2. combi unit - rubberroller and electronic segmented pad, eps system Iedjym Rl Nopfx Aa Isic working widt 1100 mm_ working height 3-160 mm - belt size 1900 X 1120 MM total 30 kw - total kg ca. 1900