Used Holzhäuer Maschinenbau Gmbh Haw1700-Ev-Funk for sale (70,608)

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Iodpjdf Ufpsfx Am Ioia Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Iedpfxefn Tu Ts Am Ieia Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. Iiodpfefn Tvhex Am Ioa With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Isdpfjfn Tviox Am Ioia Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Isdpfsx S Ux Ejx Am Ioia Dragon 220 Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Can be seen working at our factory in Ireland

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 6034, travel distance X-axis: 7,200 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 590 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, nominal power (apparent): 45 kVA, controller manufacturer: HEIDENHAIN, controller model: Bahnsteuerung iTNC 530, total height: 2,900 mm, total length: 12,500 mm, total width: 4,810 mm, overall weight: 14,000 kg, spindle speed (min.): 100 rpm, spindle speed (max.): 12,000 rpm, operating pressure: 7 bar, The BZ 7000 is designed exclusively for milling, drilling, countersinking, reaming, and thread cutting of metals, aluminum, plastics, and wood (chipboard and solid wood). URBAN CNC Machining Center BZ 7000 • Year of manufacture: 04/2008 • Control: HEIDENHAIN path control iTNC 530 • 4 axes • Travel paths X / Y / Z axis: 7200 / 450 / 590 mm • Working area X / Y / Z axis: 7000 / 400 / 350 mm • Weight: 14 t Equipment: - Robust base frame in welded steel construction - Ball rail guides on all axes - Milling spindle unit: 100 - 12,000 rpm, tool mounting SK 40 Drives: - X-axis (50 m/min) via rack and pinion drive - Y/Z-axis (25 m/min) via ball screw drive - B-axis: 9000°/min - Swiveling control panel - Automatic central lubrication Ijdpfeyzxfnjx Am Ioia - Traveling tool changer for 12 SK 40 tool holders - Coolant emulsion system - Machine lamp - Safety fence - Electronic handwheel integrated into the control panel - Chip drawers - Laser scanner - Minimum quantity lubrication system Technical Data: - Compressed air connection: R 3/8" / 6 bar - Device connection: R 1/4" - Operating pressure: approx. 6 bar - Air consumption per cycle: approx. 600 l/min at 6 bar - Electrical connection: 3 x 400 V +/- 5% / 50 - 60 Hz - Control voltage: 24 V DC - Rapid traverse X-Y-Z: 50 – 25 – 25 m/min - Infinitely variable feed: 0 - 5000 mm/min - Tool changer: disc-type changer with 12 SK 40 stations - Tool holder: SK 40 - Tool clamping: hydraulic - Coolant device: emulsion, 300 l - Spindle speed: 100 - 12,000 rpm - Speed adjustment: 80 – 120% - Drilling capacity in St 60 / aluminum: up to 28 mm Ø - Thread cutting capacity in St 60 / aluminum: up to M24 - Measurement system: rotary encoder/linear measurement system - Positioning accuracy: 0.025 mm - Repeat accuracy: 0.015 mm - Control: HEIDENHAIN iTNC 530 M, 4 controlled axes - Data interface: V 24/RS - 232 - C - Travel range X / Y / Z axis: 7200 / 450 / 590 mm - Working area X / Y / Z axis: 7000 / 400 / 350 mm - Space requirement including safety fence: approx. 60 m² (12.5 x 4.8 m) - Machine weight with accessories: approx. 14 tons - Sound emission: average sound pressure level 79 dB (A)

Condition: new, Year of construction: 2025, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Iiodpfx Amsgu Nmhs Iea Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2025, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older bigger machine Ijdpsg Dvdcofx Am Ijia

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Iiodpfetr U Hlex Am Ioa Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Manual Pipe Bender HRB-3D 850 for bending pipes and solid material up to a maximum of 12 mm Precise positioning and repeatable bending are ensured by three battery-operated digital displays that precisely show the bending angle, pipe feed, and pipe twist. - 80 mm three-jaw chuck - Feed stop system - Feed length approx. 850 mm The manual pipe bender should be permanently mounted on a table or frame (not included). Iijdpfx Amottagde Ioa We would be happy to provide you with a detailed quote if you send us your complete company address, email address, and contact details.

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° Iijdpfxjttah Rs Am Isa → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: used, Year of construction: 2018, functionality: fully functional, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 150KG per load - 4-jaw chuck - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW Isdpfex Ebzqex Am Isia - weight: 800KG Made in Germany The pictures show you an older bigger machine

Condition: new, Year of construction: 2025, 2 tables are connected with tandem circuit for a common load of 5000Kg. Technical description with the following main data: Load capacity 3000 kg static line load useful stroke 800 mm overall height 240 mm total height 1040 mm platform length 1300 mm platform width 1000 mm Material smooth sheet metal Lifting time approx. 18 sec. for the full useful stroke Iedpfx Ask E Hmtom Isia Lowering time load dependent E-connection 3 x 400 V/ 50 Hz + protective grounding, w. 16 A CEE-plug and 3 meter cable motor 2,2 kW, 1.400 rpm. valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Painting steel blue RAL 5011 Aggregate placement integrated in lifting table Control box dead man control incl. 2 m cable Total weight approx. 330 kg Tandem control for joint traversing. Attention: No guarantee can be given for 100% synchronous travel. Any differences in height are compensated for in the home position or top position! The safety shut-off strips of the two lifting tables are NOT mutually coupled. Minimum distance 500mm between the lifting tables. Maximum distance 3000mm between the lifting tables. Self-supporting floor frame with 4 flanged wheels in which the lift table is installed. 4 ball bearing flanged wheels wheelØ150/175, heavy duty version for highest load, made of turned steel C45. Overall height + approx. 50mm

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Platform size approx. 3200 x1200mm. Isdjfhbupjpfx Am Ijia Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting width (max.): 1,030 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, TECHNICAL DATA - Demonstration machine from showroom Roll carriage length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90° / 105 mm at 46° Cutting width width stop 1030 mm Saw blade max. Ø 450 mm Saw blade can be lowered under table Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1051 kg TECHNICAL DESCRIPTION Solid German engineering For trimming, cutting to length, sizing, mitre cutting etc. Dimensionally stable and self-supporting machine body manufactured as a stable welded frame construction made of thick-walled steel profiles, laser-machined sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is mounted on the machine body The robust and powerful saw unit installed in the machine frame guarantees precise saw cuts The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of gray cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the entire length, guided by hardened and and ground round steel guides with remote locking at 50 mm intervals Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening Extendable up to 250 mm on the wide side Length stop on the cross slide with mm scale and telescopic extension, extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre stop on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) are can be quickly set via a fixing system Width stop with cutting width 1030 mm to the right of the saw blade with fine adjustment, easy to adjust and fix manually, dimension display via easy-to-read mm measuring scale on adjustable ruler holder Table extension 1200 x 600 mm and table extension 750 x 655 mm Iijdpfx Aogz Hx Dom Iea Operation on the machine body with 4.3" touchscreen control for cutting height, swivel adjustment and speed Electromotive height and tilt adjustment via touch button Swivel range of the saw blade from 0° - 46 APA saw blade quick clamping system Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Safety guard can be swiveled to both sides, safety hood with interchangeable wide/narrow insert for saw blades up to Ø 450 mm Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400 mm can be lowered under the table Extraction nozzle Ø 120 mm on the machine body, Ø 80 mm on the protective hood Roller carriage, length and width stop profile anodized CE-compliant GS tested

Condition: refurbished (used), - Longitudinal/transverse with manual and automatic control - Pick-up of the Euro pallet in longitudinal and transversal direction - load capacity 1300 kg - Basic dimensions: 1430 mm wide 1670 mm long 1854 mm high - Execution: mobile - Stroke: min. height 80mm, max. height 1030mm, stroke 950mm - Color: light gray RAL 7035 complete - power supply: 440 V - 50 Hz 1,5 or 2,2 kW Iiedpfxeiyyvho Am Iea - own weight: 490 kg

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Iiodpfx Aouhphvsm Ioa Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: new, Year of construction: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on workbench top - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Usable lift: 610 mm Iisderr Twmjpfx Am Isa - Maximum height: 1150 mm - Stable platform upper frame, 970 x 590 mm, located beneath the workbench top - Robust lifting scissor construction with finger guards - Total weight: approx. 160 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Each narrow side features 2 integrated support feet with rotating footplate and rubberized foot surface, allowing the lift table to be used as either a stationary or mobile work station - Powder-coated finish: base frame and platform frame in light grey RAL 7035, scissor elements in violet blue RAL 5000 * Includes widened foot lever for easy operation with the workbench top installed even when the lift table is fully lowered Product data — Workbench: Workbench made of solid beech (50 mm thick), load capacity 200 kg on the workbench Front vice approx. 520 x 70 mm Front and rear vices equipped with spindles ensuring highly precise and stable clamping jaw guidance Rear vice and workbench top equipped with holes for bench dogs Front edge of the workbench top is 130 mm high Workbench drawer runs along the entire rear length for tool storage, includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of bench top: 130 mm high Weight of workbench top: approx. 90 kg

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 15050, throat depth: 250 mm, roller center distance: 63 mm, overall weight: 100 kg, total width: 400 mm, total length: 800 mm, total height: 1,212 mm, mount diameter: 25 mm, input voltage: 230 V, For sale is an as-new, unused bead and flanging machine, model RAS EasyFormer 12.35-3. This machine is a genuine high-performance tool for sheet metal processing, distinguished by its “Innovation Made in Germany” and ready for immediate use. Special Highlight: The AutoTeach Function! This intelligent control system learns from the operator. It records the beading or flanging process in manual mode and then repeats it fully automatically. This guarantees maximum repeatability for series production and an extremely short training period for new personnel (memory for 20 standard programs). Technical highlights & features: • Condition: Unused / As new. • Control: Modern 7" touch control panel with storage for up to 20 standard programs. • Split back gauge with ground stop plate (360 mm x 330 mm). • UnLock footswitch (1 included in delivery). Iodeyz Di Espfx Am Ieia • Capacity: Processes sheet thicknesses up to 1.75 mm (at 400N/mm2). • Working area: Maximum working depth (throat) of 250 mm. • Speed: Infinitely variable from 0–28 m/min via sensitive footswitch with soft start. • Safety: Unique UnLock safety function – immediately opens the upper roll in case of danger or electrical overload. • Connection: Simple operation on a standard 230V socket. • Fine adjustment for lower shaft for precise roller contour positioning. Comprehensive roller package included: The machine comes with five high-quality roller pairs for various applications (the rollers are also as-new/unused). For details on the included roller pairs, please refer to the pictures in the advert: 1. Flanging rollers FL 2. Swaging rollers BB 3. Forming rollers V3 4. Beading rollers S4 5. Edge forming rollers ZA Key technical data RAS EasyFormer 12.35-3 at a glance: • Max. sheet thickness at 400N/mm2: 1.75 mm • Roller center distance: 63 mm • Max. working depth (throat): 250 mm • Throat height: 18 mm • Roller shaft diameter: 25 mm • Working height: 1000 mm • Infinitely variable working speed depending on forming degree and sheet thickness: 0 - 28 m/min • Power rating: 0.75 kW • Voltage: 230 Volt • Frequency: 50/60 Hz 1Ph • Net weight approx.: 100 kg • Sound level: 70 dB (A) • Dimensions: 400 mm (width); 800 mm (depth); 1,212 mm (height) Location, warranty, inspection & availability: The machine is located in 85221 Dachau/Pullhausen near Munich. The manufacturer's warranty has expired. Sale takes place with exclusion of any liability for material defects (sold as seen). The machine is as-new, fully functional, and can be inspected and tested under power by appointment. Available immediately. See the EasyFormer 12.35-3 in action in a YouTube video by the manufacturer RAS Reinhardt Maschinenbau GmbH. The video title is: "Intelligente Sickenmaschine RAS 12.35-3 | Intelligent swaging machine RAS 12.35-3 EasyFormer". On the manufacturer's YouTube channel, you can also watch various videos demonstrating the supplied roller pairs. The YouTube channel is called "RAS Reinhardt Maschinenbau GmbH".

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Machine designation: Bandsaw Manufacturer: MEBA Model: 407A-OV Year of manufacture: 2005 Condition: very good (used) Functionality: fully functional Technical details Power: 5.5 kW (7.48 HP) Iodsyxyv Aopfx Am Ijia Input voltage: 230 V Maximum cutting width: 407 mm Overall height: 2,000 mm Overall length: 1,400 mm Overall width: 2,500 mm Unladen weight: 3,500 kg Cutting range for round steel at 90°: 407 mm Cutting speed: 300 mm/min Saw band length: 5,120 mm Saw blade length: 5,120 mm Description MEBA 407A-OV CNC Horizontal Bandsaw Material feed conveyors Year of manufacture: 2005 Siemens control system Chip conveyor 5.5 kW 3.5 t L 1.4 x W 2.5 x H 2 m Saw band length: 5,120 mm Cutting speed: 15 - 150 m/min Clamping height: 10 - 407 mm Clamping width: 10 - 407 mm Cutting area: 407 x 407 mm Cutting range (round): 407 mm Infinitely adjustable lowering speed: 0 - 300 mm/min MEBA Maschinenbau GmbH Standard commission System designation: ECO 407A-OV Year of manufacture: 12/2005 Type: ECO 407A-OV MEBA Operating instructions MEBAMAT 407 A-OV Chapter 1 - Technical Data Machine type: MEBAMAT 407 AOV Machine number: 7099 Cutting range: 90° Round: 407 mm Flat: 407 x 407 mm Bundle clamping range: 10 - 407 mm Width: 10 - 407 mm Height: 0 - 600 mm Material feed: 0 - 9999 mm Single: Multiple: Remnant length: Manual: approx. 25 mm Automatic: approx. 70 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: stepless hydraulic Lowering speed: 0 to 300 mm/min - stepless Saw band dimensions: 5120 x 41 x 1.3 mm Operating instructions MEBAMAT 407 A-OV Saw band tension: hydraulic Approx. 3050 kg (net) Machine dimensions (L x W x H): Approx. 1500 x 2600 x 2100 mm Max. support weight: Material weight max. 600 kg/m Working height: 750 mm With installation elements approx. 800 mm (option)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 9,000 mm, height adjustment type: electric, grinding belt speed: 25 mm/s, total height: 2,200 mm, total length: 4,640 mm, total width: 2,650 mm, overall weight: 1,200 kg, grinding length: 2,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 4,640 mm, space requirement width: 2,650 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sander M2S92-150 with two sanding belts for manual sanding, matting, and polishing. For processing steel, stainless steel, and brass. Not for aluminum or titanium! Scope of delivery includes: - Machine stand with connecting elements - Belt drive - Pneumatic belt tensioning and manual belt guide - Sanding unit with contact roller, manually movable from belt 1 to belt 2 - Electric table lift - Flat machine table - Workpiece stop on the machine table - Original equipment sanding belts - CE-certified version - Operating instructions + manufacturer's declaration according to Appendix 2 The sturdy machine with its welded steel construction runs very smoothly. The two machine stands are equipped with a crank so that even longer parts can be sanded on the machine. The sanding belt is guided by three belt guide rollers, providing the largest possible working area for the operator and thus ensuring optimal work, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. Each belt has a separately adjustable, pneumatic belt tensioner. This allows for optimal belt tension adjustment for each belt. The dust collection system is designed to effectively capture the resulting sanding dust and direct it to the extraction nozzle when connected to an appropriate extraction system. To ensure effortless operation, the sanding unit is mounted on play-free roller guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended far enough that workpieces do not have to be pushed under the sanding belt when placed on the table. The electrical controls for the main functions are conveniently located in the center of the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Iedpfx Amsv S Sr Re Ijia Control cabinets and small housing in "light gray" The machine is supplied in its basic configuration with two initial equipment belts (W x L) 150 x 9000 mm and a contact roller approximately 50° shore for a belt width of 150 mm. Additional accessories: 3-axis table with integrated handling device for rotating and swiveling the workpieces. The handling device is mounted in the center of the table under the insert frame. To work with the handling device, the insert frame is removed from the machine table. The handling device is equipped with four vacuum suction cups for holding the workpieces and consists of: The bearing with the rotary axis, to which a brake disc is mounted on the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional locking disc is mounted on the swivel head, allowing for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically via a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with an inserted frame = 80 daN. Workpiece weight when using the handling device relative to the clamping plate = 25 daN or 120 Nm relative to the center of the rotary axis.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive Iedjtwb U Aspfx Am Isia - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps Iodpfxst U Uiaj Am Ioia ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: used, Year of construction: 2006, operating hours: 100 h, functionality: fully functional, Profi Industrial Cutting System (Longitudinal/Cross) – Grossmann – ONLY 100 operating hours! Description: For sale is a high-precision, automated longitudinal and cross-cutting machine from quality manufacturer Grossmann Maschinenbau. The system has a total runtime of no more than 100 operating hours. It is therefore in an almost mint technical condition and shows hardly any signs of wear on the mechanical components. Originally designed for cutting chip mats, this machine’s robust construction and versatile PLC control make it suitable for a wide range of materials (e.g. rubber, cork, fleece, composites, films, textiles, etc.). Technical highlights & features: Condition: Nearly new (max. 100 operating hours). Format: Maximum cut length 2,500 mm x maximum working width 1,200 mm. Complete line: Includes professional unwinder and winder for fully automatic material flow from roll to roll or roll to format. Isdpfx Aoylxmfem Isia PLC control: Professionally programmed, with a choice between manual and automatic operation. Material handling: Automatic gripper feed positions material precisely in the end position, with integrated edge removal system for perfectly clean edges. Operation: Intuitive control via display, foot switch, and optical/acoustic production completion indicators (traffic light/horn). Precision: Integrated laser for exact material alignment. Safety: Fully enclosed design and modern safety monitoring. Versatility: This machine is a true all-rounder for any rolled material that needs to be cut to precise sheet sizes or strips. Its stable construction with a high-quality aluminum profile system ensures maximum rigidity. Complete documentation available, including process protocol, wiring diagrams, and technical drawings. The machine can be inspected and tested under power by appointment. For exact technical details and questions about fields of application, please feel free to contact me personally. Contact: Phone: 05427 9423 20

Condition: new, Year of construction: 2024, - Frame and edge press 1-sided/stationary - Useful dimension in mm as frame press 2630 x 1610 - Useful dimension in mm as edge press 3000 x 1610 - outer dimensions in mm 3200 x 2090 x 730 - Sturdy welded frame construction made of thick-walled profile tubes and laser-machined sheet steel parts ensure a torsion-free and dimensionally stable press base frame (no bolted frame parts!) - with left abutment, sliding carriage for width adjustment and central locking system and 2 hand hydraulic press units with Ergo handle - 3 vertical pressure beams type SK with roller bearings, made of strong-walled profile tube, galvanized, with hand hydraulic press units incl. Ergo handle. 20000 N pressing force, 60 mm stroke. Pressing units adjustable in 50 mm hole grid. - Lower abutment with fail-safe device, 5-fold adjustable in the hole grid. - Hold-down device with spindle press pressure - Chassis with 4 swivel castors (2 with brakes) - Powder coated (glue repellent) grey white RAL 9002 Pressure plate and abutment gentian blue RAL 5010 - Version Quattra 1-SK is equipped with comfort adjustment of the hand hydraulic press units and thus offers additional safety for the operator Iisdpjhd Nywofx Am Ija