Used Hoku Ti 105 for sale (10,450)

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Kdodpfexnqx Dox Ampok Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm

Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: Kodpfx Ajcuwptsmpodk version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), SCM bottom spindle moulder Sliding carriage in the table 120 cm Height and tilt electrically adjustable Spindle fi30 7 kW motor 4 spindle speeds Kodewt A Iqjpfx Ampsdk Very good condition

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45 Height and swivel adjustment by handwheel Kodoipv A Tepfx Ampedk Dial gauges in handwheel motor power 7,0 kW 4 speeds 30mm milling spindle Aluminum stop jaws Milling fence with crank adjustment Long cast iron tables Safety rulers

Condition: used, Year of construction: 2023, operating hours: 881 h, machine/vehicle number: ESF407088, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Ksdpfx Ajyxam Ijmpsdk Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2012, x-travel 550 mm y-travel 305 mm z-travel 460 mm table-size 820 x 320 mm tool adaptor BT 40 turning speed range 10000 U/min power requirement 11 kW Control Sinumerik Steuerung 828D rapid traverse Z-axis 1500 mm/min rapid traverse X- and Y-axis 1500 mm/min workpiece weight 300 kg no. of tools in the magazine 12 Stück dimensions 2164 x 1860 x 2200 mm weight of the machine ca. 2800 kg immediately available - Siemens Sinumerik control 828D with 15.6 inch touch display - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation in all axes for high payloads - High-torque servo drives, directly connected to the ball screw in all three axes three axes Ksdpfoywnvuox Ampsdk - Precision-ground, preloaded high-performance recirculating ball screw (Ã? 40 mm x P16 x C3) for high rapid traverse speeds in all axes - Telescopic guideway cover on all three axes - Main spindle BT40 up to 10,000 min¯¹ with belt drive or up to 12,000 min¯¹ with inline spindle - Massive, precise milling table with four T-slots, generously dimensioned and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch switch makes it much easier to run in programs - Tool changer double-arm gripper with 12 tool positions - Coolant unit with chip flushing system and cleaning gun - RJ45 plug connection, USB and 230 V power connection - Enclosed control cabinet with integrated heat exchanger ensures optimum temperature temperature and prevents the ingress of dirt particles - Oil separator - Machine light in the work area

Condition: used, empty load weight: 3,580 kg, maximum load weight: 6,920 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Load capacity 1,500 kg, 4 cylinder aluminum platform 1,800 mm long, 2 roll-off stops, with batteries and charging cable, front with portal doors for loading with short drive-over plate, 14 x lashing eyes, , , , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Kdsdpfxjyvlhfj Ampsk

Condition: used, empty load weight: 3,580 kg, maximum load weight: 6,920 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2021, loading space length: 7,100 mm, loading space width: 2,490 mm, loading space height: 2,630 mm, loading space volume: 46 m³, suspension: air, tire size: 245/70R17,5 143J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R17,5 143J, rear tire size: 245/70R17,5 143J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, tail-lift, Load capacity 1,500 kg, 4 cylinder aluminum platform 1,800 mm long, 2 roll-off stops, with batteries and charging cable, front with portal doors for loading with short drive-over plate, 14 x lashing eyes, , , , --  Misprints, errors and changes reserved, sample images --, More data at: !, More Details: ! Kdodpfx Ameyu Uu Depsk

Condition: new, Year of construction: 2021, Optimum CNC Milling Machine OPTImill F 105 CNC Sinumerik 808D ADVANCE with accessories (new, unused condition): Includes accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 liters of cutting and drilling emulsion AQUACUT C1 - Preparation for 4th axis - Carousel tool changer with 12 tool positions - All linear guides with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drives on all axes (closed loop) - Max. spindle speed 10,000 rpm - Machine lamp in the working area - Portable electronic handwheel with enable switch and emergency stop - Coolant system with 120-liter tank - Tool change is automatic or at the push of a button (electropneumatic tool clamping system) Dimensions and weights: Length approx. 2,164 mm Width/depth approx. 1,860 mm Height approx. 2,200 mm Weight approx. 2,800 kg Drilling/milling capacity: Max. face mill diameter: 70 mm Max. shank cutter size: 35 mm Rapid traverse speed: X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Electrical data: Supply voltage 400 V Network frequency 50 Hz Electrical connection: Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Distance vertical spindle to table min. 100 mm Distance vertical spindle to table max. 600 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Coolant system: Coolant pump drive power: 650 W Tank capacity 120 l Pneumatic connection: Operating pressure 7 bar Travel range: X-axis automatic 550 mm Y-axis automatic 305 mm Z-axis automatic 460 mm Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 rpm Motor power (continuous duty S1) 7.5 kW Motor power (intermittent duty S6-30%) 11 kW Motor torque (continuous duty S1) 48 Nm Motor torque (30% duty cycle S6) 70 Nm Feed motor torque: X-axis continuous duty S1: 8 Nm Y-axis continuous duty S1: 8 Nm Z-axis continuous duty S1: 11 Nm Tool changer: Type: Carousel Number of tool positions: 12 Max. tool diameter: 70 mm Max. tool length: 300 mm Max. tool weight: 6 kg Tool change time (T to T): 7 s CNC Tool Starter Set BT 40: - 1 pc. face mill arbor, 27 mm mounting - 1 pc. keyless drill chuck 1.5 – 16 mm - 2 pcs. Weldon 6 mm / 20 mm - 1 pc. each Weldon 8 mm / 10 mm / 12 mm / 16 mm - 1 pc. adaptor BT 40 to MK 3 - 4 pcs. collet chuck ER 32 - 1 pc. collet chuck wrench ER 32 - 18-piece collet set ER 32 - 1 pc. height adjustment device - 1 pc. assembly and tool presetting aid - 15 pcs. pull studs Hydraulic Milling Vise HCV 105: - Robust design for milling - Guide surfaces hardened and ground - Booster system: low effort, high clamping force when tightening - Wide clamping range with locating pin and various hole spacings - Manufactured from high-quality stainless steel - Long service life thanks to high quality - High clamping force Kedpfeyxyhfsx Ampedk Jaw height 42 mm Jaw width 107 mm Clamping width 170 mm Length without handle 442 mm Total height 107 mm T-slots 16 mm Clamping force 24.5 kN Clamping pressure 2,500 kg Dimensions and weights: Weight approx. 22 kg

Condition: excellent (used), Year of construction: 2020, PLASMA CUTTING TABLE WITH COMPRESSED AIR: TYPE REMOCUT II 1500-3000/105A PNEUMATIC ENGRAVER Kdodpoyug Enjfx Ampjk

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G portafilter machine New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keypad of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted from the touch screen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Setup and program guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5,3 kW Kdsdsk Sgt Tspfx Ampsk Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 400V: No Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists More SM NEW 105 models - new and used - can be found in our store! International shipping costs on request!

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G coffee maker New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. The Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keyboard of each group. Kdodpfx Aekyt Nrempsk The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted via the touchscreen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Set-up and programme guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. Workstation lighting with customisable multicolour LEDs makes the machine even more ergonomic with an eye to aesthetics. Groups: 2 Power: 5.3 kW Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: Yes Hot water: Programmable Power 380V: No Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists You can find more SM NEW 105 models - new and used - in our shop! International shipping costs on request!

Condition: good (used), La San Marco NEW 105 MULTIBOILER 2G portafilter machine New price 8.800 ,- € The NEW 105 Multiboiler series uses the latest technology from La San Marco. Multiboiler technology allows precise temperature control for each boiler of each group. The temperature is set in a simple and intuitive way on the keypad of each group. The boiler for steam and hot water has an electronic automatic temperature setting that can be easily adjusted from the touch screen keypad. The innovative keypad with touch screen technology is complemented by a graphic RGB display. Setup and program guidance is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LEDs makes the machine even more ergonomic with an eye to aesthetics. Kjdpfxsk Sgttj Ampodk Groups: 2 Power: 5,3 kW Steam lance: 2 Boiler: 10 L + 2 x 0,45 L Operation: Touch Display Multiboiler: Yes Power 230V: No Hot water: Programmable Power 400V: Yes Size LxDxH : 790 x 535 x 515 mm Shape: Traditional Barista Lights: Yes Item condition: defective, for spare parts or for hobbyists More SM NEW 105 models - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Kdedpfxjyphnyo Ampsk

Condition: used, Year of construction: 2023, operating hours: 3,044 h, machine/vehicle number: ESF407085, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Ksdjtr I Hkopfx Ampsdk Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,308 h, machine/vehicle number: ESF407089, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Ksdpfx Astr Ifrompedk Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,346 h, machine/vehicle number: ESF407087, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Kdedpfetr If Iex Ampjk Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 1,027 h, machine/vehicle number: ESF407079, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Kjdpfx Ajww Admompsdk Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,210 h, machine/vehicle number: ESF407191, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Kdedstr Ixcspfx Ampsk Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 767 h, machine/vehicle number: ESF407088, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Kdedpfjtr Hprox Ampok Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,760 h, machine/vehicle number: ESF407081, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information Kodpfxotr Iy Te Ampodk

Condition: used, Year of construction: 2023, operating hours: 4,424 h, machine/vehicle number: ESF407160, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Kdsdotr Npaepfx Ampok Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 3,120 h, machine/vehicle number: ESF407154, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Kdjdpjtr Ighefx Ampjk Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2023, operating hours: 2,061 h, machine/vehicle number: ESF407153, fuel type: diesel, power: 80 kW (108.77 HP), motor manufacturer: John Deere, Field of application: Construction Empty weight: 2.075 kg Generator capacity: 105 kVA Transport dimensions (LxWxH): 2.9x1.15x1.71 Please contact PFEIFER GROUP for more information Kdodpfx Ajtr Icaempok

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 table surface area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm Kdodoww Nb Sepfx Ampjk total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - SHOW-ROOM-MACHINE