Used Hofer Lan for sale (6,132)

Condition: excellent (used), very good condition. Kodpexyzqusfx Aqgslt

Condition: used, functionality: fully functional, Band length: 6800 mm Table: 2500 mm Delivery possible by arrangement. Ksdpfeyg N Agsx Aqgelt

Condition: used, Year of construction: 2013, Used machine Kledey R Haxepfx Aqgjt Year of manufacture: 2013 Equipment and technical data: - User-friendly controls - Ideal working height - Large opening - Full access from all four sides - Push-button control - Stop button - Safety cable - EMERGENCY STOP at every location - Timer with acoustic signal - Pressure switch automation - Automatic temperature control system - Infinitely adjustable stroke limitation - Heavy-duty rack compensation - Energy-saving mode as standard - Switchable side cylinders - Total pressing force: 120 tons - Plate dimensions: 3000x1350 mm - Number of cylinders: 6 - Piston diameter: 85 mm - Max. opening / stroke: 400 mm - Closing time: approx. 16 sec - Heating time to 80°C (from room temperature): approx. 14 min - Maximum permissible operating temperature: 140 °C - Total connected load: 20.1 kW - Hydraulic power: 1.21 kW - Fuse rating: 35 A - Dimensions: 3500x1610x2000 mm - Total weight: 6200 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3599, total height: 2,600 mm, total length: 2,200 mm, total width: 2,200 mm, overall weight: 16,300 kg, pressing force: 100 t, passage height: 1,200 mm, passage width: 1,200 mm, Hydraulic press (previously used for lamination of door panels) Pressing area: 1300x1100 mm Press cylinders: 4x D110 mm Maximum pressing force: 1000 kN Ksdpfxjwt Axco Aqgolt The machine is currently disassembled and was fully operational until it was taken apart. For an additional charge, two compatible heating plates including control cabinet are also available.

Condition: reconditioned (used), Grinding table dimensions: 2500 x 800 mm Grinding belt dimensions: 6800 x 150 mm Motor power approx. 3.0 kW Mechanical table height adjustment Right-left rotation 2 grinding belt speeds Grinding belt cover on top Kledpjv D H Siofx Aqget CE Incl. special grinding shoe Note on used machines: • Errors in technical information and prior sale reserved. • Prices quoted are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm with rear fence Kjdpfxoq Rb Irj Aqgslt

Condition: ready for operation (used), Year of construction: 1978, Höfer veneer saw incl. joining milling unit Cutting and milling length 3550 mm Cutting height 45 mm Saw motor power 2.2 kW Milling motor power 1.1 kW Extraction channel Workpiece clamping by handwheel Year of manufacture 1978 Price 2800.- Kedpjwq D Tpefx Aqgslt

Condition: ready for operation (used), Year of construction: 1986, Ott Höfer 2-Roller Glue Application Machine ZLA 1300 Working width: 1300 mm Max. workpiece thickness: 80 mm Roller diameter: 165 mm Both rollers are in good condition Feed speed: 18 m/min Klodoxqrdaepfx Aqgot Drive power: 0.75 kW Working height: 800 mm Required space: 2000 x 750 x 1150 mm Weight: 500 kg

Condition: excellent (used), For sale: Hofer press in good working condition. Kodox Rrw Nspfx Aqgjlt

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Kledpfevx E Rajx Aqgjt Price per piece from location: only €85 (net)! Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Condition: used, Power cables, solar cables, fiber optic cables, fiber optic cables, data cables, LAN cables -Manufacturer: Lapp Kabel, Unitronic LAN Kabel CAT.7 4 x 2 x 23AWG -Type: STP/SH PiMF 600 Art. 2170614 -Length: 244 m -Price: complete Klodpfxef Tivls Aqget -Dimensions roll: Ø 550 x 350 mm -Weight: 22 kg

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° MARCELS MASCHINEN AG Kjdpfx Aew Nnqujqgjlt

Condition: refurbished (used), Year of construction: 2015, operating hours: 6,727 h, functionality: fully functional, overall weight: 4,824 kg, fuel type: diesel, tank capacity: 1,000 l, power: 160 kW (217.54 HP), output current: 288 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power (apparent): 200 kVA, rotational speed (max.): 1,500 rpm, motor manufacturer: Stamford, For sale is a Powerplant AS200 IS2 diesel genset with 200 kVA prime power, manufactured in 2015, powered by an Iveco CURSOR87TE1F.S550 engine with Stamford alternator. Total operating hours: 6727h. A key feature of this unit is the HJS Emission Technology Stage IIIA to Stage V emission upgrade carried out by HJS Emission Technology UK in Swindon. The genset was equipped with a modern exhaust aftertreatment system designed to significantly reduce emissions and allow operation in emission-sensitive environments and projects. The genset is already registered with CVRAS/EST. In accordance with CVRAS/EST requirements, a telematics unit has been installed to monitor NOx performance. The first year of telematics service is included. After 12 months, an annual service fee applies. The telematics connection allows remote monitoring via the HJS online portal, including AdBlue refill status, system condition and NOx performance data, helping operators maintain compliance and monitor the system efficiently. The retrofit system combines proven exhaust aftertreatment technologies including: Diesel Oxidation Catalyst (DOC) Diesel Particulate Filter (DPF) SCR system with AdBlue injection The DPF reduces particulate emissions, while the SCR system lowers NOx emissions. The installed 80-litre AdBlue tank provides approximately 30 operating hours at full load without refilling, depending on load profile and operating conditions. This retrofit solution enables existing generators to meet modern Stage V emission requirements without the immediate need to purchase a new machine. Installed HJS components: 10.5” DOC 10.5” DPF 13.0” SCR Klsdpfxoy R D Hcs Aqget 80-litre AdBlue tank Control unit Telematic unit AdBlue pump Fuse box Display The original silencer was removed during conversion. Operating time after the upgrade is only approx. 10 hours. This genset is ideal for construction, industrial, rental and infrastructure projects where low emissions and NOx monitoring are required. It is also suitable for use within London Low Emission Zones and other projects with strict emission regulations. Technical Specifications: Generator make: Powerplant Model: AS200 IS2 Prime power: 200 kVA Engine: Iveco CURSOR87TE1F.S550 Engine power: 160 kW RPM: 1500 Alternator: Stamford UCI274H1 Control panel: Deep Sea Electronics DSE7410 Housing: Canopied Year: 2015 Dry weight: 3762 kg Wet weight: 4824 kg Voltage AC: 400V / 230V Voltage DC: 24V Frequency: 50 Hz Serial number: 4184/01 Note: Sold as a used industrial machine. Inspection and technical verification prior to purchase are recommended. All information is provided to the best of our knowledge based on available technical data. If you have any questions or require further information, please contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Kledexawbijpfx Aqgst Punch Pressure 45T Standard Size Fitment Punch & Die 18mm *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £5,750.00 + VAT

Condition: excellent (used), - Dimensions: 1006x595x1495 mm - Power supply type: Electric Kljdpfowyb T Esx Aqgst - Number of clamps: 3 - Smooth surface - Heating plates: 3 zones at the bottom, 2 at the top - Voltage: 400V - Power: 22 kW - Weight: 358 kg - Refurbished equipment: Equipment is prepared upon order; pickup and return times are agreed at that moment (please request price after refurbishment).

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Klsdpey Hk Dajfx Aqgjt

Condition: good (used), Saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade -Manufacturer: Pilana, saw blade Ø 610 x 7 mm -Number of teeth: see photo -Inner diameter: 80 mm -Bolt circle: Ø 120 x 22 mm -Quantity: 3x saw blades included Kljdpfx Aqow Au Axegot Price: per piece -Weight: 9.6 kg/pc.

Year of construction: 2010, condition: used, Suitable for dressing and profiling diamond and CBN grinding wheels using silicon carbide wheels (individually or in a package). Accessories: Total enclosure, Camera system, image field 20 x 16 mm Extraction system 4000/3 D 240 3kW 630 m³/h Swivel unit for package dressing Software for converting DXF files to CNC files on PC Touchscreen Standard software for straight, bevel or radii etc. DXF files. Single Diamond- / CBN grinding wheel diameter: 400 mm Single-disc width: 30 mm Packages: packages to Ø 150 mm and width 150 mm Swivel axis: swivel plate for swivel angle: +/- 95 degrees Kedpfx Aey Tl Iaeqgjlt Delivery axis travel: 82 mm Oscillation hub : 83 mm Spindle mounting diameter: 60 mm DIA/CBN wheel flange hole: 32 mm Speed of silicon wafer: 700 - 2800 rpm SIC Grinding Spindle: 60 mm Ø Workpiece clamping X-axis travel: 185 mm Y-axis travel: 194 mm Workpiece spindle head holder diameter : 100 mm with belt spindle diameter : 100 x 200 mm Grinding wheel balance: max. 40 kg Workpiece spindle speed: 500 - 1500 rpm SIC discs up to max.: 200 x 20 mm x 32 mm Connected load: approx. 2.5 kW (400 Volts / 50 Hz) Dimensions W x D x H: 2000 x 2000 x 2600 mm weight: 1200 kg colour: red RAL 3003 / grey RAL 7035

Condition: used, Year of construction: 2007, operating hours: 5,222 h, machine/vehicle number: B195-02-6078, fuel type: diesel, Empty weight: 12.400 kg Lifting capacity: 500 kg Working height: 2.150 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Solideal Transport dimensions (LxWxH): 4.73x2.44x3.65 Please contact PFEIFER GROUP for more information Kodpoymi T Sofx Aqgslt

Condition: used, Year of construction: 2012, operating hours: 314 h, machine/vehicle number: HL7814-00-7356, Empty weight: 2.440 kg Lifting capacity: 450 kg Working height: 1.000 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.45x1.5 Kljdpfx Aqewfcbzsgst Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 302 h, machine/vehicle number: HL7814-00-7036, Empty weight: 2.440 kg Lifting capacity: 450 kg Working height: 1.000 cm Front tyres / undercarriage remaining: 50 Rear tyres remaining : 50 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.45x1.5 Kedpfx Ajwf Ulloqgelt Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 348 h, machine/vehicle number: HL781000-7040, Empty weight: 2.380 kg Lifting capacity: 450 kg Working height: 1.000 cm Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 2.49x1x2.35 Ksdpfx Aqjwg Ranjgjlt Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 545 h, machine/vehicle number: HL9714-00-7045, Empty weight: 2.440 kg Lifting capacity: 450 kg Kjdpfx Aqjwimaiegjlt Working height: 1.000 cm Front tyres / undercarriage remaining: 20 Rear tyres remaining : 20 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.45x1.5 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, operating hours: 589 h, machine/vehicle number: HL11812-00-7029, Empty weight: 2.960 kg Kodpfx Aowly Npjqgelt Lifting capacity: 300 kg Working height: 1.400 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.25x2.69 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2015, operating hours: 800 h, machine/vehicle number: HL11812-00-7765, Empty weight: 2.960 kg Lifting capacity: 300 kg Working height: 1.400 cm Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 2.49x1.25x2.69 Please contact PFEIFER GROUP for more information Klsdpsxwiwqsfx Aqgjt