Used Hhh Much Spline Gauges for sale (2,871)

Condition: used, 8 Multi-rib profile calibration mandrels in wooden cases Knjdpfoctiwiox Akwoc L 4734-44

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB Kjdpszxxifofx Akwonc PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: as good as new (ex-display), Year of construction: 2025, pressure 150 t stroke 300 mm table surface area 1070 x 290 mm column travel between the guideways 1070 mm ajustment speed 9.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 11.0 kW weight of the machine ca. 1870 kg. range L-W-H 2200 x 1300 x 2300 mm Exhibition machine from 2025 with only approximately 2 operating hours Condition as new Special price upon request Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in . and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed Knjdpfexaabfsx Akwsc * 1 retraction speed - Piston can be stopped in any position - Hydraulic tank permanently mounted on the side - Operating instructions

Condition: excellent (used), Universal tool grinder Michael Deckel S11 with accessories and tool cabinet in very good condition !!! Technical data: >> Year of construction 1986 >> serial no. 759 Knsdpfoqd N S Dex Akwec Clamping range : >> Clamping area of the tool slide 500 x 180mm >> Max. Tool diameter between the centers 130mm >> Max. Max. tool diameter with flying clamping in the universal dividing head 620mm >> Max. Tool lengths between centers 270mm >> T-slot machine stand 12mm >> T-slot grinding head, tool slide and accessories 8mm Movement range: >> Working paths Sanding stroke 190mm Grinding stroke for swirl grinding 190mm Cross adjustment of tool slide 100mm Vertical adjustment of grinding head 325mm Longitudinal adjustment of grinding spindle 5mm >> Rough adjustment travel Tool carrier 220mm Grinding head support 800mm Universal dividing head on tool slide 330mm >> Swivel angle Grinding head support 360 degrees Grinding head 360 degrees Tool carrier 360 degrees Grinding spindle: Three-phase drive motor 1.1KW at 2800 rpm Spindle speeds, infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter 125mm Max. Cutting wheel diameter 200mm Dimensions: Weight 520 kg Dimensions ( depth x width x height ) 800 x 1100 x 1760mm Space requirement ( including operation ) 2.5 x 2.3 m Accessories and equipment: 1 tool cabinet with the following contents: >> Universal dividing head SK40 >> Twist and relief grinding device >> SK40 radius grinding device >> Tailstock >> Swivel support finger >> Machine vice >> Sk 40 tool holders >> Measuring holder >> Intermediate bearing >> Setting gauge >> Support finger for radius cutter >> Tooth supports >> Indexing head >> Protective covers >> 1 set of collets as good as new from 1 to 17.5 mm 0.5 mm increasing >> Grinding wheel holders >> various grinding wheels >> dividing wheels >> suction device with vacuum cleaner >> various holders and much more (as shown in the pictures) About the machine : We are offering a Michael Deckel S11 universal tool grinding machine. The machine is suitable for grinding high-precision parts. With the S11, individual parts and small batches can be ground amazingly quickly, economically and flexibly with maximum ease of use. The Deckel S11 is in very good condition and equipped with many accessories. Mechanically and electrically tested. Take the opportunity to view and try out this machine under power on site.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating hours: 100 h, stroke length: 800 mm, operating speed: 9 mm/s, controller manufacturer: CADMAN TOUCH, working width: 12,000 mm, bending force (max.): 1,600 t, back gauge: 1,000 mm, distance between stands: 10,600 mm, control type: CNC control, number of axes: 15, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Knedpfx Akoygkuwowec Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 1980, machine/vehicle number: 134B, functionality: fully functional, operating hours: 15 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding height: 270 mm, height adjustment type: mechanical, total height: 1,900 mm, total length: 3,450 mm, total width: 1,513 mm, overall weight: 4,900 kg, travel distance X-axis: 1,120 mm, travel distance Z-axis: 190 mm, grinding length: 850 mm, workpiece weight (max.): 80 kg, disc diameter: 125 mm, distance stand to spindle center: 362 mm, distance table to spindle center: 180 mm, feed length X-axis: 1,120 mm, feed length Z-axis: 190 mm, feed rate X-axis: 15 m/min, grinding spindle speed: 7,400 rpm, grinding wheel diameter: 125 mm, grinding wheel width: 16 mm, grinding width: 320 mm, pivoting range: 369 °, rotational speed (max.): 7,400 rpm, rotational speed (min.): 2,880 rpm, spindle speed (max.): 7,400 rpm, spindle speed (min.): 2,880 rpm, table length: 1,000 mm, table width: 250 mm, tank capacity: 127 l, working range: 850 mm, Spline Grinding Machine MSZ 3451Б (Profile grinding machine for splined shafts) The MSZ 3451Б is a specialized spline grinding machine designed for precision grinding of external splines and profiled shafts. Manufactured by МСЗ (Moscow Machine Tool Plant), this machine is intended for industrial applications requiring accurate profile grinding and reliable repeatability. The machine is suitable for workpieces with a maximum length of 1000 mm, while the maximum grinding length is 850 mm. It supports workpieces with a maximum diameter of 320 mm and a maximum weight of 80 kg, making it ideal for medium-sized splined shafts. The machine allows grinding of parts with 3 to 48 splines, covering a wide range of spline configurations. The grinding spindle is designed for grinding wheels with diameters from 25 to 125 mm and a maximum wheel width of 16 mm. The spindle operates at stepped speeds of 2880 / 4550 / 6300 / 7400 rpm, driven by a total installed power of 4 kW. The permissible grinding wheel speed corresponds to the selected spindle speed and wheel diameter, ensuring safe operation. The machine features a rigid worktable with a length of 1000 mm and a width of 250 mm, with a travel distance along the X-axis from 200 to 1120 mm and a Z-axis travel of 190 mm. Height adjustment is performed via a mechanical system, providing precise and stable positioning during grinding operations. With overall dimensions of approximately 1513 × 3450 × 1900 mm and a machine weight of about 4900 kg, the MSZ 3451Б offers excellent stability and vibration damping. The machine operates on three-phase power (3 × 400 V, 50 Hz) and is supplied with factory documentation, facilitating operation, setup, and maintenance. Key Features: *Specialized spline grinding machine *Maximum workpiece length: 1000 mm *Grinding length up to 850 mm *Maximum workpiece diameter: 320 mm *Workpiece weight up to 80 kg *Number of splines: 3–48 *Grinding wheel diameter: 25–125 mm *Grinding wheel width: max. 16 mm *Spindle speeds: 2880 / 4550 / 6300 / 7400 rpm *Total installed power: 4 kW *Mechanical height adjustment *Rigid industrial construction (~4900 kg) Typical Applications: *Grinding of external splines Knjdpfx Aox S Hc Nskwsc *Profile grinding of splined shafts *Precision machining in machine-building industries *Repair and refurbishment of transmission components *Small- and medium-series production of splined parts

Condition: new, pressure 30.0 t stroke 200 mm table surface area 775 x 190 mm column travel between the guideways 775 mm ajustment speed 7.5 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 3.0 kW weight of the machine ca. 400 kg. dimensions of the machine ca. 1.500 x 700 x 1.800 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., . but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display Knsdpfoxaayhjx Akwjc - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: new, pressure 60.0 t stroke 250 mm table surface area 1040 x 370 (315) mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 4.0 mm/sec return speed 10.0 mm/sec engine output 4.0 kW weight of the machine ca. 800 kg. dimensions of the machine ca. 1.700 x 700 x 2.100 mm Features: - Robust electro-hydraulic workshop press with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out bolts, bearings, bushings, and much more. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Includes round steel chain and 2 locking pins * Piston rod with metric mount - 1 set of V-block prism supports - Pressure gauge for pressure display - Simple manual control with: * 1 feed speed * 1 working speed * 1 retraction speed Knedexaakgjpfx Akwjc - Piston can be stopped in any position - Fixed hydraulic tank mounted on the side - Operating instructions

Condition: excellent (used), Year of construction: 2020, TESA Micro-Hite 600+M – Motorized Digital Height Gauge For sale: a professional TESA Micro-Hite 600+M digital height gauge, manufactured by the Swiss company TESA Technology, designed for precise dimensional measurements in metrology laboratories, quality control departments, and industrial plants. The device is equipped with an electronic control panel with a color display, a motorized measurement system, and a precise measuring probe. Technical specifications: * Manufacturer: TESA Technology – Switzerland * Model: Micro-Hite 600+M * Catalog number: 00730080 * Serial number: 1K2320 02 * Measurement range: 600 mm * Device type: digital height gauge * Drive: motorized * Reading system: digital * Measurement units: mm / inches * Control panel: color LCD display with keyboard * Factory calibration date visible on the plate: 17.12.2020 * Calibration certificate: no. 1K 3056 007 32 * Marking: CE Functions and measurement capabilities: * Precise measurement of component heights * Measurement of hole and shaft diameters * Measurement of distances between surfaces Kodpjz Si Sqefx Akwsnc * Determination of center points * Differential and comparative measurements * Automatic movement of the measuring head * Storage of measurement results * Support for serial measurements * Measurement in metric and imperial units Equipment visible in the photos: * TESA Micro-Hite 600+M height gauge * Electronic control panel * Measuring probe * Granite measuring plate * Steel frame for the granite plate * Additional accessories and fixing elements visible in the photos

Condition: good (used), Year of construction: 1998, punching force: 70 t, overall weight: 2,400 kg, total length: 2,100 mm, total width: 1,300 mm, total height: 1,900 mm, Profile shear with punching and notching station, shear capacity 70 tons = 450x15 mm, punching capacity 130 tons = Ø 28x20 mm, punching throat 500 mm, punching table 1150x530 mm with gauges, shear gauge with trigger pulse, 2 foot pedals, much tools; dimension 1300x2100x1800 mm, weight ca. 2400 kgs Kjdpfx Ajmig D Dokwonc

Condition: used, Year of construction: 1971, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Sheet metal width: 2,000 mm Sheet metal thickness for St 42: 16 mm Passage width: 2,250 mm Kedoz S Ng Hepfx Akwsnc Overhang: 600 mm Knife and cutting Knife length: 2,005 mm Cutting gap adjustment: 0.05–0.95 mm Cutting angle: 1° 40′ Clamping beam: 10 pcs. Back gauge Gauge length: 1,000 mm Back gauge adjustment: 10–1,000 mm Work table Table size: 2,500 × 700 mm Table height above floor: 800 mm Hydraulics and Electrics Oil volume: 900 l Operating voltage: 380 V Machine data Machine weight: approx. 10 t Space requirement: approx. 3 × 2.3 × 2.3 m EQUIPMENT Foot switch Supports Spare knife

Condition: used, Year of construction: 2011, functionality: fully functional, input voltage: 400 V, RADEMAKER / RONDO Topline ASTec.W industrial line – Production of layered and filled products Complete RADEMAKER / RONDO industrial line for sheeting, gauging, shaping, filling, and cutting dough products. The equipment was previously used for the industrial production of salmon en croûte. Thanks to its modular design and numerous workstations, it can be adapted to other pastry, viennoiserie, and savory or sweet layered product productions, subject to the necessary tooling and adaptations. 1. RADEMAKER Block Processor – 2006 Industrial equipment designed for the gradual reduction of dough blocks into a homogeneous strip, particularly for processing layered dough blocks. Type: Block Processor Year: 2006 Serial number: 280053 Working width: 650 mm Belt width: 650 mm Weight: 1,725 kg Power supply: 240/415 V, three-phase, 50 Hz, 17 A Documented dimensions: 6,000 × 1,400 × 2,850 mm 2. RONDO Topline ASTec.W Industrial line for shaping and preparing filled products. Model: Topline ASTec.W Line reference: D2147 Manufacturer documentation: edition 01/2012 ASTec hygienic design adapted for wet cleaning. Documented composition: Dough feeding and conveying belts. Two RONDO flour dusting devices. RONDO laminator, working width 740 mm, belt 700 mm. 15-meter industrial shaping table, 700 mm belt, with marking, cutting, and spraying devices. RONDO Rondofiller dosing unit for filling application. Overlay conveyor for working with two layers of dough. Gauging unit. Knedpfx Ako Abz D Iowec RONDO ZST600 cutting station. RONDO station, model ZKWA605A.A, year 2011, machine number D1221401, working width 660 mm. RONDO guillotine, model ZGEM700W.A, year 2009, machine number C9273305, with documented tooling of five 80 × 125 mm dies. Dough scrap recovery system. Electrical control cabinet and Siemens operating interface. 3. Applications The line was used for the production of products based on salmon wrapped in dough. It also offers possibilities for adaptation to various layered products, turnovers, pastries, filled specialties, and preparations involving two layers of dough. Other applications can be considered depending on the cutting, shaping, and dosing tools available or to be installed. 4. General characteristics Manufacturers: RADEMAKER / RONDO Years of major equipment: 2006, 2009, and 2011 Total length of the documented configuration: approximately 24 meters Documented maximum width: approximately 2 meters Documented maximum height: approximately 2.85 meters Width of production conveyors: up to 700 mm depending on the section Technical documentation and manufacturer's manuals available. Industrial line consisting of several modules that can be considered for adaptation to other productions. The exact composition, available accessories, and production possibilities must be confirmed during technical inspection.

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, operating hours: 35,000 h, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine can still be inspected in its current operational state at the factory in Northern Germany. Working length: 4100 mm Distance between columns: 3650 mm Pressing force: 170 tons Knodo Abaq Hjpfx Akwsc Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: Includes tool cabinet with tools.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: DN-ELV3200KG, Kone crane, overhead crane, bridge crane, industrial crane Knjdszv Du Ispfx Akwsc Hoisting mechanism with 0.3 full load hours = only 7 operating hours on the meter!!!!! Load capacity / lifting capacity 3.2t - 3,200KG Gauge 13600mm, overall dimension approx. 13800mm Year of manufacture 2000 Lifting height 6m Overall height from top of crane to hook approx. 1050mm Head beam length with buffer approx. 2450mm With floor control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS General Information Manufacturer: Baykal Type of Machine: Hydraulic Plate Shear Model: HNC 8100/6 Working Area Working Width: 8,100 mm Ksdpfx Aksz R Dwkowonc Sheet Thickness: max. 6 mm EQUIPMENT Motorized Back Gauge Automatic Shear Gap Adjustment Automatic Angle Adjustment Sheet Support Device

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: EM196 - IS4095, Steel crane, overhead crane, gantry crane, indoor crane Load capacity / lifting capacity: 5t - 5000KG Track gauge: 11,390mm, overall dimensions approx. 11,550mm TYPE EL-C 50 11,390 E Year of manufacture: 2001 Lifting height: 6m Overall height from top of crane to hook: approx. 900mm Head beam length with buffer: approx. 2290mm With floor-mounted control Crane is dismantled and immediately available Very good condition, see pictures Column-mounted slewing cranes and wall-mounted slewing cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Knedpfozv H Ansx Akwsc Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: used, Zwick Type: BT1-FR050TH.A1K 50 kN Material testing machine Zwick/Roell BT1-FR050TH.A1K material testing machine – Precise strain gauge tests Note: No PC included!! Highlights: Testing force: 50 kN (tensile / compressive) High-precision TC-MODCSCC module for strain gauge load cells (4- & 6-conductor) Ksdpfx Ajzii Ugskwenc Measuring range: 0.2 – 165 % nominal value, measurement value acquisition up to 500 Hz Maximum resolution: up to 297,000 points (at 50 Hz) Positioning repeatability: ±10 µm Crosshead speed: 0.0005 – 600 mm/min Robust design, compact dimensions: 1,814–2,688 mm height, 936 mm width, 722 mm depth Low noise: 59 dB(A), ambient temperature +10 to +35 °C, humidity 20–90 % Special features: Ideal for research, development, or industrial material testing Dimensions & weight: Load frame: Testing force (tensile/compressive): 50 kN Load frame height: 1,714 mm Overall height: 1,814 – 2,688 mm Load frame width: 760 mm Overall width: 936 mm Load frame depth: 477 mm Overall depth: 722 mm Weight: With electronics unit: 230 kg With typical attachments: approx. 300 kg Condition: used Scope of delivery: (See picture) ZwickRoell BT1-FR050TH.A1K testing machine Operating manual (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: EM263 - IS4091, Steel crane, overhead crane, bridge crane, workshop crane Payload / lifting capacity 6.3 t - 6300 kg Gauge 11,390 mm, overall dimension approx. 11,550 mm TYPE EL-C 63 - 11.205 E Year of manufacture 1996 Lifting height 6 m Overall height from top of crane to hook approx. 950 mm Knsdjzv H Ecjpfx Akwoc Head girder length with buffer approx. 2180 mm With floor-mounted control Crane is disassembled and immediately available Very good condition, see pictures Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code Collection preferred

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Knsdpfx Aksz Ad Dcewec Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: refurbished (used), Year of construction: 2025, Schaudt A500 500-2500 Grinding length: 500 / 750 / 1,000 / 1,500 / 2,000 / 2,500 mm Center height: 150 mm / 180 mm / 225 mm Workpiece weight: 300 kg / 500 kg Additional optional features: Knedpfx Aksd Hfd Nowsc - Completely new control cabinet with basic PLC and panel - Conversion to ball screw drive including DUO control (cycle-controlled) - "Workpiece storage" for 10/15/30/50 workpieces - Mini handheld control unit for Duo control - Glass scale in X and Z axes - In-process gauging - Frequency converter for external grinding spindle - Swiveling internal grinding unit - Frequency converter for internal grinding spindle - CE marking in conjunction with partial or fully encapsulated splash guard - Remote maintenance - Matching coolant / extraction system - Grinding wheel flange / changing arm - and much more We can also overhaul your existing grinding machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and more.

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Ksdpfx Akjz Slkpewenc

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Load capacity / lifting capacity: 2t - 2000 kg Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Knodpfx Akjzgbypowec Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: used, functionality: fully functional, machine/vehicle number: 34554, Mayer & Cie. RELANIT S single-jersey circular knitting machine. Mayer & Cie. single-jersey circular knitting machine, model RELANIT S, machine number 34554. Manufactured in Germany. NAMEPLATE DATA Nominal diameter: 762 mm / 30 inches Gauge: 28 E Pitch: 0.91 mm Number of needles: 2,664 Manufacturer: Mayer & Cie. Maschinenfabrik, Emil-Mayer-Straße 10, Albstadt (Germany) The nameplate indicates “Made in Western Germany” APPLICATION Single-jersey fabric in fine gauge, suitable for shirts, underwear, nightwear, lightweight outerwear, and fine technical fabrics. RELANIT TECHNOLOGY Relative motion cam system, which reduces friction, extends needle life, and reduces yarn tension. INSTALLED EQUIPMENT REIVAX DC-3 electronic defect detector (Taube, Mataró), with sensitivity, current, defect, needle stroke, memory, stop, and reset warnings. OLI-FOX lubricator (Talleres Guerra, Mataró). Analog control panel with A / B / C revolution display. Autonics FX4S counter. Complete upper rail installed on the machine. CONDITION Complete and assembled machine. It does not need to be disassembled to be removed from the warehouse. Currently, fabric from the last production run is still in the machine. A visit can be arranged for an on-site inspection and operational test. YEAR Approximately 1990, based on the serial number and the nameplate. CE MARKING The machine does not have CE marking. For its commissioning within the European Union, the buyer must carry out the corresponding conformity assessment and, if necessary, the required adaptations. Kedpfx Akezvhx Rjwonc DIMENSIONS AND TRANSPORT Approximate dimensions: Length: 2.70 m Width: 2.00 m Height: 2.70 m Disassembly: No disassembly required Location: Albacete, Spain

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm Knsdszf Upbopfx Akwec with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: used, Year of construction: 2021, functionality: fully functional, CMS 520 ki C Multi Gauge-Type 818 000 C E1,5.2, 2 System - 50'' - 12 Yarn) Kodpeyaqt Hjfx Akwjnc 48 units available for this model