Used Herzog Ly300 for sale (54)

Condition: ready for operation (used), Year of construction: 2008, Herzog + Heymann mobile flat pile feeder F530, year of manufacture 2008 Herzog + Heymann M7.32, year of manufacture 2008 – suitable for miniature folds – 12 folding pockets – roller diameter 32mm – minimum fold length 25mm – maximum working width 52cm – double rear knife shafts – transfer section Herzog + Heymann knife folding unit XS 300/6, year of manufacture 2008 – for small formats Herzog + Heymann upright sheet delivery 271, year of manufacture 2008 Stahl miniature upright sheet delivery STA30F, year of manufacture 1990 Herzog + Heymann transfer section 246/08, year of manufacture 2008 Optional: Herzog + Heymann small format feeder, year of manufacture 1991 – bottom suction feed Hjdpfx Aox Hbkdoa Iou

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Hedpfxozqfx Dj Aa Isu

Condition: like new (used), Year of construction: 2010, 6 pockets 72 cm working width Hedpfezrnvhjx Aa Ieu Pattern image

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 720 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 90 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. To open the jig: Lever in the middle to the right: insert workpiece Hsdpfx Asid Ixdsa Iou To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch, emergency stop switch and restart protection. Without Fixing Holder: max. Length of workpiece, finished: 300mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 90kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 720x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks inklusive folgendem Zubehör: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 6 months, total width: 360 mm, total length: 1,020 mm, total height: 500 mm, type of input current: AC, workpiece diameter (max.): 25 mm, overall weight: 92 kg, input voltage: 400 V, Clamp, cut off and surface grinding in one operation The machine has two grinding spindles working in parallel, one for cutting off and one for finishing the end face to the finished size The desired workpiece length is set to an accuracy of 1/100mm on the scale. Hjdpfx Aaoid Iyme Isu To open the jig: Lever in the middle to the right: insert workpiece To close the jig: Lever to the left To cut: Lever up to the left To grind the surface: Lever down to the left To open the jig: Lever in the middle and to the right: remove the finished workpiece The grinding wheel can be adjusted and dressed at any time without losing the proper position. Version with motor protection, cover switch and restart protection. Without Fixing Holder: The machine is delivered with two rulers (300mm & 600mm). max. Length of workpiece, finished: 300mm or 600mm min. Length of workpiece, finished: 54mm Diameter of Workpiece: Ø1-25mm With Fixing Holder: max. Length of workpiece, finished: 60mm min. Length of workpiece, finished: 12,5mm Diameter of Workpiece: Ø1-10mm Ejector Pins with a Cylindrical Head: max. Size 6 max. Oversize of the Workpiece before processing: 195mm Length Tolerance: +/-0,01mm Angularity: +/-0,01mm Weight: 92kg Dimensions without Scale Rod (LxWxH): 430x360x500mm Dimensions with Scale Rod (LxWxH): 1020x360x500mm Total Height (open Cover): 950mm Cutting Wheel, tissueless: SGA60P6BR1, Ø180x1xØ31,75mm Grinding Wheel: PA46, Ø100x50x10xØ20mm Location: Austria / Vienna Condition: New, Machine in Stock, 6 Month Warranty Delivery Time: 3 Weeks Including the following accessories: • 1 piece Cutting Wheel SGA60P6BR1 with Flange, mounted • 1 piece Grinding Wheel PA46 with Flange, mounted • 1 piece Diamond Dresser, mounted • 1 piece Belt, mounted • 2 piece Y-Spanner-Wrench • 1 piece each Allen Key 3mm, 5mm, 3/16“ • 1 piece Hex Wrench 6mm • 1 piece Scale Rod 300mm • 1 piece Scale Rod 600mm • 1 piece Caliper with Quill for Scale Rod • 1 piece Cleaning Brush • 1 piece Rod • 1 piece Manual, German • 1 piece Wooden Box

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Hjdeziphaepfx Aa Ieu

Condition: good (used), Herzog Heymann KL112-6 Pharmaceutical Folding Machine + Press and Stacking Made in Germany. The world’s highest-class folding machine. The machine is ready for production. Infinitely variable feed and folding speed adjustment. 6-cassette module. Vacuum feeding Desta BAS 350 platen press Hsdpfx Aaozurz Tj Ieu HH 177 stacking delivery This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Technical specifications: Maximum format: 350x500mm Weight: 650kg 380V power supply

Condition: good (used), Year of construction: 2007, Pick & Place machine including HHS hot melt application system with 4-channel control unit and tank on a mobile cart Hsdpfx Aoyuixkea Iju

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,760 mm, conveyor belt width: 730 mm, conveyor belt speed: 180 mm/s, total length: 2,000 mm, total height: 1,000 mm, overall weight: 150 kg, input frequency: 50 Hz, motor manufacturer: WEG, Equipment: emergency stop, TAF item number: 1000006117 Manufacturer: Herzog + Heymann Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,000 x 960 x 530 mm Width including side frame in mm: 820 Width including drive unit in mm: 820 Side frame height in mm: 80 Conveyor length in mm: 1,760 Conveyor width in mm: 730 Belt type: Smooth, blue Belt width in mm: 730 Substructure: Included, lifting substructure (H: approx. 530–1,000 mm) Running surface: Wood Hjdpfx Aasy D T Ddj Ieu Drive: Head drive Motor type: Geared motor Motor manufacturer: WEG Motor specifications: 150 W / 50 Hz / 22 rpm Motor position (in conveying direction): left Conveying speed in m/s: 0.025 – 0.18 Net weight in kg: 150 Special features: manually height-adjustable, stepless speed control, emergency stop, castors, incl. CEE 16A plug Condition: used / fully functional Functional test: OK

Condition: ready for operation (used), Year of construction: 1999, Herzog Heymann small folding machine KL112 – 1250, year of manufacture 1999 Hodpfx Aajxlu Tye Isu Flat pile feeder, shingled, 176–646, station with 6 pockets Cold glue unit HHS C210 with one glue head 6 segmented folding rollers The second station is not available!

Condition: refurbished (used), functionality: fully functional, Herzog Heymann folding unit max. working width 42cm 6 folding pockets Ruler "right" Hjdpsvnml Refx Aa Iju 24-pin MBO control

Condition: ready for operation (used), Year of construction: 2003, Deliveries Hsdpfx Aasxrwdne Ieu Herzog Heymann stack delivery 502-04

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, infeed width: 520 mm, Submission of a bid requires collection by the deadline of 31/12/2025! The offer consists of: Feeder F530 mobile (Serial number: 95080104, Year of manufacture: 2008) Folding unit H + H M7.32 (Serial number: 253/08, Year of manufacture: 2008) Delivery unit H + H 271 (Serial number: 246/08, Year of manufacture: 2008) Transfer unit H+H 246/08 (Serial number: 850.3-363, Year of manufacture: 2008) Hsdpfx Aoxyhg Aja Ieu Knife H+H XS 300/6 (Serial number: 253/08, Year of manufacture: 2008) Small format feeder H+H (Serial number: 204/91 272-0085, Year of manufacture: 1991; bottom suction) Small format delivery Stahl STA30F (Year of manufacture: 1990) TECHNICAL DETAILS Feed width folding unit: 520 mm Number of pockets folding unit: 12

Year of construction: 2002, condition: ready for operation (used), functionality: fully functional, infeed width: 720 mm, Placing a bid obligates the buyer to collect the equipment on time, no later than 31/12/2025! The offer includes: - MBO R 700 Feeder (Serial no.: 0722420, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1543, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1544, Year: 2002) - H+H M7.35 Folding Unit (Serial no.: 1545, Year: 2002) - MBO SBAP-46-ME Vertical Delivery (Serial no.: 90020602, Year: 2002) - H+H 148/2 Transfer Unit (Serial no.: 820-411, Year: 2002) - Bickel SGU Die Cutter (Serial no.: 033, Year: 1997) - MBO 3-Up Delivery for SAP 66-ME (Serial no.: 910913362) - Polar L-1000-W-3 Pallet Lift Table (Serial no.: 6072421) TECHNICAL DETAILS Hsdpfxsxyhnye Aa Iou Fold Plates Fold plates 1st folding unit: 6 (individually driven, removable sheet transfer) Fold plates 2nd folding unit: 6 Fold plates 3rd folding unit: 2 Infeed Width Infeed width 1st folding unit: 720 mm Infeed width 2nd folding unit: 720 mm Infeed width 3rd folding unit: 520 mm This machine comes with a gate fold plate (usable in units 1 and 2), as well as 2 separate sheet diverters and 1 auxiliary frame for setup. Units 2 and 3 are electrically height adjustable! Note: The MBO delivery unit is defective.

Condition: used, Markator MV5 VU4 marking system with operator display ZE101, Nadler labeling machine. Hsdpfx Aaez Hxxmo Ieu Shipping costs upon request. From stock (may show signs of storage). Condition as shown in the pictures. Please refer to the pictures for further technical information. Scope of delivery as shown in the pictures. The invoice will be enclosed with the shipment. Payment method: Bank transfer Self-collection Information regarding bank details, payment terms, etc. will be sent to you by email.

Condition: used, Year of construction: 1993, functionality: fully functional, machine/vehicle number: 226-7342, working width: 210 mm, spindle diameter: 40 mm, overall weight: 2,400 kg, power of feed motor: 2,200 W, spindle speed (max.): 6,000 rpm, workpiece height (max.): 120 mm, workpiece width (max.): 220 mm, input voltage: 380 V, number of spindles: 6, input frequency: 50 Hz, Equipment: motor brake, Selling a Weinig Profimat 22N with ATS control system. Lightly used, in good condition, fully functional. Spindle upgraded from 5.5 kW to 11 kW (2007). Includes Weinig precision adjustment gauge. Accessories included, see photos. Forklift available for loading. Hedjz D Hp Ujpfx Aa Iju If interested, a video of the machine in operation can be sent.

Condition: used, Novalith measuring plate, granite plate, hard rock plate, control plate, 120x80cmx16cm with base cabinet, total height 1m used, as shown in the pictures from stock (may have storage marks) For further technical information, please refer to the pictures. Scope of delivery as shown in the pictures. with invoice The invoice will be enclosed with the shipment. Hsdpfoz Hwyvox Aa Iou

Condition: ready for operation (used), Year of construction: 1980, Herzog Heymann small folding machine KL112, year of manufacture 1980/1985 Schuppen feeder 176 1st station KL112 with 6 pockets Hodpfxovyapys Aa Iou 2nd station KL112 with 4 pockets Vertical stack delivery 177

Condition: used, Year of construction: 2008, functionality: fully functional, workpiece weight (max.): 250 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, total height: 2,050 mm, total length: 2,800 mm, total width: 2,200 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 560 mm, workpiece length (max.): 800 mm, type of input current: AC, overall weight: 2,500 kg, input voltage: 400 V, positioning accuracy: 0.001 mm, Equipment: cooling unit, documentation/manual, CHMER A422S Wire EDM Machine Year of manufacture: 2008, used Travel in X: 400 mm Travel in Y: 250 mm Travel in Z: 220 mm Maximum workpiece size: 800 x 560 x 215 mm Maximum workpiece weight: 250 kg Travel in U x V: +/- 30 mm Maximum taper angle: +/- 14.5° / 80 mm Wire diameter: 0.15 to 0.3 mm Axis drive system: AC servomotors Glass scales in X and Y axis Achievable surface accuracy: RA 1.6 µm Anti-electrolysis generator CNC control: FANUC compatible 15” TFT monitor Hedpfx Aozhvhdja Iju Handheld remote control Automatic wire threading with thermal wire cutting Threading without water jet in 6 seconds Dielectric cooler Block for automatic vertical and conical wire alignment Documentation in English A horizontal rotary axis (6th axis) is included. This was dismantled due to lack of need and was not in operation. Connection: 400 V, 3-phase, 13 kVA Dimensions (L x W x H): 220 x 280 x 205 cm Machine weight: 2,500 kg Optional Hirschmann clamping frame: €2,000.00 Commissioning, price based on effort Basic training, price based on effort

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available Hjdpfxou Ng Sdo Aa Ieu *

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 950693, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 43 m/min, rapid traverse Y-axis: 43 m/min, rapid traverse Z-axis: 30 m/min, nominal power (apparent): 20 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 900 kg, total height: 2,682 mm, total length: 2,340 mm, total width: 2,830 mm, table width: 580 mm, table length: 1,150 mm, table load: 900 kg, rotational speed (max.): 12,000 rpm, overall weight: 4,400 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 9,150 h, spindle motor power: 13,000 W, spindle nose: BT-40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 250 mm, tool diameter: 130 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Bridgeport VMC 1000XP with 5 tool holders Year of manufacture: 04/2003 Serial number: 950693 3 axes Travel: X: 1020 mm, Y: 610 mm, Z: 600 mm Rapid traverse rate X and Y: 43 m/min, Z: 30 m/min Positioning accuracy: ±0.005 mm Repeatability: ±0.002 mm Y-axis with 4 guide rails Table: 1150 x 580 mm Table load: 900 kg Spindle motor power: 13 kW Speed: 12000 rpm Spindle taper: BT 40 Dual-arm tool changer: 30 tools Tool change time: 5.2 sec Blum measuring probe TC52 Oil mist extraction Coolant system Automatic central lubrication Vacuum monitor for operating a vacuum clamping plate Control: Heidenhain iTNC 530 Connection: 400 V, 3-phase, 50 Hz; Full load current 30 A, Total current 20 kVA Pneumatics: Compressed air 5.5 bar Hsdpjzbqx Sjfx Aa Iju Dimensions: 2830 x 2340 x 2682 mm Weight: 4400 kg Spindle operating time: 9150 h The machine was mainly used for machining aluminum and plastic, so the guide rails and spindle are in very good condition. Including 5 tool holders: 1 Weldon chuck, Ø16 1 collet chuck OZ DIN 6388, Ø 2-16 1 collet chuck OZ DIN 6388, Ø 6-25 1 milling cutter holder 1 short drill chuck, Ø 1-13 mm

Condition: used, Year of construction: 2007, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 380 mm, total height: 2,680 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 2,100 kg, type of input current: three-phase, feed length W-axis: 300 mm, power: 6 kW (8.16 HP), drill diameter: 6 mm, Equipment: documentation/manual, Topedm TSH-400T CNC CNC electro-discharge drilling machine with electrode changer and guide changer Year of manufacture: 2007 Includes guides, collets, and various spare parts Operates with brass electrodes Automatic electrode changer Automatic, patented guide changer Predefined machining parameters Hedpfx Aaoztyxds Isu Repeatability: 0.01 mm Burr-free drilling Automatic electrode wear compensation enables precise blind hole drilling Full water bath machine Water treatment unit Deionized water as dielectric, no additives required Deionization, large filters Water chiller Additional flushing at the guide Technical data Max. travel (X x Y x Z): 400 x 400 x 380 mm Table size: 480 x 458 mm Electrode diameter: 0.15 to 6.0 mm Maximum distance head / table: 315 mm Machine head movement (W-axis): 300 mm Repeatability: ± 0.01 mm Number of positions in automatic electrode changer: 21 Maximum working current: 50 A Automatic guide changer: 5 guides Fillable working tank Working tank size (L x W x H): 670 x 930 x 330 mm Power consumption: 6 kW Footprint (L x W x H): 2700 x 1900 x 2680 mm Weight: 2100 kg Optionally, more than 1000 multi-channel brass electrodes, 0.3 to 6 mm, are in stock and can be sold at a favorable price. The machine is in good condition and can be tested under power. Inspection is possible during our business hours or by appointment. The sale is due to upcoming retirement.

Condition: used, power: 1.68 kW (2.28 HP), Industrial vacuum cleaner RINGLER RI 321-D 1.1, workshop vacuum cleaner for chips and oil 1.68 kW 2850 rpm 380 V Shipping costs upon request Hodpez Hyn Nofx Aa Iou From stock (may have storage marks), condition as shown in the pictures Please refer to the pictures for further technical information. Scope of delivery as shown in the picture. The invoice will be enclosed with the shipment. Hsck U Niez Hxxmsg Aou Payment method Bank transfer Self-collection You will receive information about bank details, payment terms, etc. by email. Provider

Condition: used, Year of construction: 1980, machine/vehicle number: 267, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 615 mm, roller diameter: 630 mm, pivoting range: 10 °, actuation type: manual, total height: 2,100 mm, total length: 1,100 mm, total width: 1,400 mm, overall weight: 800 kg, table height: 1,020 mm, Equipment: lighting, rotational speed infinitely variable, Vertical band saw, manufacturer Kölle Type ST 63 Year of manufacture: 1980 Overhang: 615 mm Maximum cutting height: 320 mm Table size: 780 x 770 mm Table can be tilted +/- 10° Cutting speed continuously adjustable from 15 to 2300 m/min (3 gear stages) Band saw blade length: 4580 to 4740 mm Band saw blade welding device: IDEAL Halogen lamp Hjdpfx Aaezymyhe Iou Due to the large adjustable range of the cutting speed, the machine can be used for both wood and metal. Connection: 400 V, 16 A Weight approx. 800 kg Dimensions W x D x H: 1400 x 1100 x 2100 mm Available from November 15, 2026.

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: VM0429, turning diameter over cross slide: 196 mm, spindle bore: 42 mm, turning diameter over bed slide: 350 mm, center height: 170 mm, turning length: 650 mm, quill stroke: 140 mm, total length: 1,900 mm, total width: 1,100 mm, total height: 1,300 mm, spindle speed (max.): 3,250 rpm, spindle speed (min.): 20 rpm, metric thread steps: 51, type of input current: three-phase, overall weight: 1,350 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Lead and feed screw lathe with digital display Colchester Master VS 3250 Digital display, 3 axes, Heidenhain Center height: 170 mm Distance between centers: 650 mm Swinging diameter over bed: 350 mm Swinging diameter over cross slide: 196 mm Spindle speed, stepless, from 20-3250 RPM (3 gear stages) Year of manufacture: 1996 Spindle bore: 42 mm Spindle mounting D1 4“ Camlock Tailstock taper MK 4 Tailstock quill travel: 140 mm Coolant pump Central lubrication of guideways Electromagnetic spindle brake Halogen lamp Longitudinal feeds from 0.036 to 1.2 mm/revolution Cross feed: half of the longitudinal values 51 metric thread pitches from 0.2 to 14 mm 56 Whitworth thread pitches from 2 to 56 threads/inch 20 module thread pitches from 0.2 to 3.5 module 20 diametral pitch thread pitches from 8 to 56 D.P. Operating manual and spare parts list, English Weight: 1350 kg L x W x H: 1900 x 1100 x 1300 mm Motor: 7.5 KW Including accessories: 3-jaw chuck, brand Pratt Burnerd 4-jaw chuck, Ø 200, brand Bison Quick-change collet chuck with lever Hsdpfszp Nknsx Aa Ieu 15 pcs. collets, Ø 1/1.5/2/3/4/5/6/7/8/9/10/12/13/14/15 mm 16 sets of soft jaws for 4-jaw chuck Quick-change tool holder Multifix with 5 tool holders incl. facing tool, cutoff tool, and internal turning tool 1 pcs. center punch 1 pcs. drill chuck, Ø 1 to 13 mm