Used Heavy-Duty Rotary Table for sale (21,923)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: CR416871, overall weight: 661 kg, CR0700K Heavy-duty table Total transmission ratio: 260 Table drive speed [1/min]: 11.5 Table output torque [Nm]: 8000 MTM [kgm2]: 3,500 Turning time: in sec: 3.3 Shift angle in°: 180 Pause time (s): 4 Installation position: normal (MP1) Drive position: DP1 (laterally inside) Disc bearing: Standard Rotary encoder: without Motor: Fanuc Special clamping disk CR: Standard Partial accuracy: +/-15" Repeat accuracy: +/- 10" Axial and radial run-out accuracy: 0.02mm Painted in RAL: 7035 Klsdpfetp T Smox Ampor Assembly instructions

Condition: good (used), Used Bode - T-slot clamping table Kljdpsxqpctefx Ampsr Length x Width x Height = 4000 x 1500 x 200 mm

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2016, color: red, Year of construction: 2016, operating hours: 2,400 h, 2016 MAFI double-steered and couplable heavy-duty trailers (Platform: 250x130cm) with 6,000kg payload, 9 units available = Further information = General information Model year: 2016 Technical information Fuel type: Electric Kedpsxzdz Sofx Ampjlr Front axle: Steered Rear axle: Steered Weights Unladen weight: 525 kg Payload: 6,000 kg Gross weight: 6,525 kg Functional Superstructure brand: MAFI 1060/6t Condition Technical condition: very good Optical condition: very good Further information Contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2016, operating hours: 2,400 h, load capacity: 6,000 kg, fuel type: electric, color: red, 2016 MAFI heavy-duty trailers with double steering and coupling capability (floor: 250x130 cm), load capacity 6,000 kg, 9 units available = Further Information = General Information Year of manufacture: Sept. 2016 Model year: 2016 Axle Configuration Front axle: Steered Rear axle: Steered Weights Unladen weight: 525 kg Gross weight: 6,525 kg Functionality Body brand: MAFI 1060/6t Condition Technical condition: Very good Optical condition: Very good Further information Please contact Arne Honingh for more details. Kljdoxzd A Ajpfx Amper

Condition: used, Platform transport trailer, heavy-duty trailer Industrial trailer with 2-axle turntable steering Manufacturer: PLAN, type 11 Chassis no.: 31361-1 = year of construction 03/2015 Chassis no.: 31361-2 = year of construction 03/2015 Payload 20000 kg Unladen weight approx. 3760 kg Gross vehicle weight 23760 kg Platform height 850 mm Platform length 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width 2500 mm Tires Ø 559 x 300 mm (solid rubber tires 559/305-406.4) - 4 wheels with 2-axle turntable steering Ksdeiiumrepfx Ampjlr - track-running - Reversible drawbar, drawbar can be bolted to the front or rear - Drawbar with drawbar eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beam Height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checker plate - Tarpaulin body with steel base frame, can be loaded from the side Max. transport height 2300 mm under tarpaulin Length for transportation 610 cm (with drawbar folded up) Width for transportation 250 cm Height for transport 330 cm (with tarpaulin body) Weight per trailer approx. 3760 kg Good condition 2 pieces available Price per trailer

Condition: not inspected (used), functionality: unexamined, total length: 8,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 400 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Shelf dimensions: 1,800 x 1,100 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 8,000 x 1,200 x 2,000 mm Weight: 400 kg External reference: 9 Klodpfjy D Sc Eex Ampor

Condition: not inspected (used), functionality: unexamined, total length: 2,700 mm, total height: 2,400 mm, total width: 600 mm, overall weight: 200 kg, No reserve price – guaranteed sale to the highest bidder! By bidding, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Dimensions of storage surface: 2,600 x 500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,700 x 600 x 2,400 mm Weight: 200 kg Klsdpfxey D Sbhs Ampjr External reference: 19

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period from 23/06/2026 to 26/06/2026! TECHNICAL DETAILS Shelf dimensions: 2,700 x 1,100 mm MACHINE DETAILS Kljdpfxey D Rn Tj Amper Dimensions & Weight Dimensions (L x W x H): 2,800 x 1,200 x 2,000 mm Weight: 250 kg External reference: 1

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Kodpfx Aewhylvompelr Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: new, Year of construction: 2025, pipe diameter (max.): 12,000 mm, travel distance X-axis: 12,000 mm, Equipment: cooling unit, safety light barrier, Three-chuck Heavy-duty Fiber Laser Tube Cutting Machine NS-12052HG 12000mm, 500 Chuck Servo drive is used for auxiliary feeding High-quality chuck Adaptive to different sizes of tubes Servo control, excellent performance Give the equipment ultra-high dynamic performance Auxiliary feeding system Reduce work intensity and improve efficiency More types of processed tubes Support flying cutting High-precision Z-axis control Bevel cutting Highly automated ≤2m workpieces are unloaded through servo flaps Kedjv D Uhfspfx Ampjlr

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic Kjdpfx Ajfvqmxjmpjlr

Condition: used, Year of construction: 2009, Doosan HM1000 Heavy Duty Twin Pallet Horizontal Machine Centre. S/No HM10000080 (11/2009) with Fanuc 31i model A Control, Pallet size 1000mm x 1000mm, Travels X = 2100mm, Y = 1250mm, Z = 1250mm, Big Plus Spindle BT50, Spindle speeds 20 – 6000rpm, RUCKLE Full ‘B’ axis, Max Table load 5000kg (upgrade capacity), ATC Carousel 90 positions, U Axis fitted to Spindle for D-Andrea Heads, Renishaw TS27R Tool Probe, Renishaw RMP 60 Spindle Probe, Qty of BT50 Toolholders (Backend only), Screw Drive Swarf Conveyor, Filtermist, Main Spindle refurbished in 2020, Machine Weight 29,000kgs Location: These lots are located in Dunfermline, Scotland, UK. Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Kjdpfx Amey Amg Aepjlr

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: Klodpfx Amoyx Hw Tjpsr 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg

Condition: used, Year of construction: 2000, overall weight: 260 kg, table diameter: 70 mm, Rotary Table Table diameter 250 mm Spindle bore Ø 70 mm Weight 260 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Ksdey Eglkspfx Ampslr Feel free to view our other advertisements for a complete overview of our stock.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, UNUSED GSA T320 CNC Tilting and rotating table. Full specification on request. Item in new condition having never been used. Available now.. Kljdpfoxy Iq Ujx Ampjr Contact us for further information.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Ksdpsh U Rzgofx Ampjlr Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.012 We have a stock of >100 axles. Klsdpfjy Eft Hjx Ampor Please contact us if you can't find what you are looking for.

Condition: used, color: other, first registration: 04/2010, Year of construction: 2010, Serial number: 25.50.744.013 We have a stock of >100 axles. Kljdpey Efrcefx Ampjr Please contact us if you can't find what you are looking for.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, total length: 10,000 mm, total height: 3,200 mm, total width: 1,200 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Dimensions of storage platform: 2,700 x 1,100 mm MACHINE DETAILS Dimensions & Weight Kodpfx Amoy D Txbopolr Dimensions (L x W x H): 10,000 x 1,200 x 3,200 mm Weight: 1,000 kg Internal reference: 74

Condition: not inspected (used), functionality: unexamined, table length: 1,700 mm, table width: 500 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely pickup between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Number of workbenches: 4 Surface dimensions: 1,700 x 500 mm Dimensions per workbench: 1,500 x 730 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 7,500 x 1,100 x 2,700 mm Kodpfx Amey D Tuvepelr Weight: 1,500 kg EQUIPMENT • Welding positioner (Manufacturer: RÖHM) • Balancing scale • Sheet metal cutting device (cutting length: 100 mm) • Collets • Arbor press • Electric engraver • Vice (jaw width: 150 mm) • Abrasives • Sandpaper • Sheet metal shears (Manufacturer: FEIN) • Screws • Drill bits • Number punches • Heavy-duty rack without contents External Reference: 25

Condition: not inspected (used), functionality: unexamined, load capacity per storage section: 2,600 kg, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, No reserve price – guaranteed sale to the highest bidder! Kledsy D Th Aopfx Ampor Placing a bid obligates timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Dimensions per shelf: 2,700 x 1,200 mm Shelf load capacity: 2,600 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg External reference: 5

Condition: not inspected (used), functionality: unexamined, total length: 5,700 mm, total height: 3,500 mm, total width: 1,200 mm, overall weight: 700 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates you to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Dimensions per storage shelf: 2,700 x 1,200 mm MACHINE DETAILS Kljdpfx Aey D Tg Sompjr Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,200 x 3,500 mm Weight: 700 kg External reference: 7

Condition: used, machine/vehicle number: XL9T0N30074415051, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 13,800 mm, total width: 2,550 mm, wheelbase: 9,110 mm, color: other, Year of construction: 2010, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Registration number: OL-10-GF Kedpfsyu Iinox Ampslr

Condition: used, machine/vehicle number: XL9T0N30074415050, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2010, total length: 13,800 mm, total width: 2,550 mm, suspension: air, wheelbase: 9,110 mm, color: other, Year of construction: 2010, = Additional options and accessories = - Air Suspension - BPW Axles - Lift Axle = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Lift axle; Max. axle load: 9000 kg Weights Empty weight: 6.540 kg Carrying capacity: 38.460 kg GVW: 45.000 kg Identification Ksdpfjymlurox Ampolr Registration number: OL-11-GF

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Kledpfx Ajyw Tkwjmpjr Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.