Used Hans Schoen Ute/B for sale (41,037)

Year of construction: 1977, condition: ready for operation (used), A single-column press is offered. Press force: 30000kg, table area X/Y: approx. 600mm/450mm, protective field height: 300mm, safety distance: 110mm, stopping distance: 18mm. SICK light barrier safety system, manual handwheel adjustment, analog pressure display, external control cabinet, foot switch preparation. Weight: approx. 3200kg, overall dimensions X/Y/Z: 1400mm/1800mm/2400mm. Inspection possible by arrangement. Iijdsy Tatqopfx Aa Ioc

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Iijdoy S A Nfspfx Aa Isc

Condition: repair required (used), Year of construction: 1972, machine/vehicle number: 611, functionality: limited functionality, pressing force: 100 t, For sale is a Hans Schön hydraulic press with 100 ton capacity. It was last used approximately 7 years ago. At that time, the machine had an issue with a hydraulic valve, which was not repaired since the press was no longer needed. Otherwise, the machine ran flawlessly until then. The press does not have UVV (accident prevention certification)! Iedpfx Aox Ehlcsa Ioic

Year of construction: 1989, condition: ready for operation (used), Pressing force: 300kN, motor power: 37kW, with hydraulic feed and protective enclosure. Iisdpelmmwrsfx Aa Iec

Year of construction: 2000, condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Height: 4700mm Siemens S7 control Floorstanding Iodpfxogbvkve Aa Ijic Sick lightguards Die cushion: 200mm stroke

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Light barrier Sick Ijdpfxetiwgij Aa Ieic Separate control cabinet Ritta Side passages Ground level installation

Year of construction: 1976, condition: used, pressure 250 t Iiodpfxjlp U A So Aa Ioc distance between columns 900 mm stroke 300 mm table surface area 850x900 mm ram surface 800x880 mm stroke 300 mm table height 1050 mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, pressing force: 20 t, stroke length: 150 mm, table width: 800 mm, table length: 500 mm, installation height: 400 mm, hydraulic double column press Schoen UTE/B20 year 2000 used control Siemens S 7 pressing force: 200 kN Installation height 400 mm stroke: 150 mm table width: 800 mm Ijdpjt Dzpfsfx Aa Ijic Table depth: 500 mm

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) * Ijdpfx Aou Nfmyea Ieic

Condition: ready for operation (used), Year of construction: 1998, power: 37 kW (50.31 HP), pressing force: 250 t, stroke length: 150 mm, table width: 900 mm, table length: 1,000 mm, overall weight: 16,000 kg, Very nice and well maintained hydraulic press. 250 tons pressing force. Approximate dimensions: H: 380 cm. W: 200 cm. L: 200 cm. Weight: 16,000 kg. Can be loaded by crane on collection against payment. Transportation can be arranged. Iijdpfjry Trpjx Aa Ijc Sold for customers. Location: DK-7600 Struer. Make an appointment for a demonstration.

Condition: refurbished (used), Year of construction: 1979, machine/vehicle number: 2386, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 440 mm, table length: 320 mm, installation height: 280 mm, hydraulic refurbished SCHOEN double column press TES 25 Year of manufacture 1979/2025 Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Iedpfx Ajvw Spmsa Ijic Table width: 440 mm Table depth: 320 mm The machine is being refurbished - new control system - new light barriers - revision of the hydraulics

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW Iiedsy H Ibvepfx Aa Iec

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 200 t, Hans Schoen NH/LF 200 (UVV) – Powerful & Robust 🔧 Model: Hans Schoen NH/LF 200 📍 Type: Hydraulic Double-Column Press (UVV-certified) 📅 Year of manufacture: approx. 1988 (depending on the specific machine) 📦 Condition: used, fully functional ⸻ 💪 Technical Highlights • Pressing force: approx. 200 t – suitable for demanding forming and drawing applications • Hydraulic drive for precise force and stroke control • Column clearance: approx. 1,050 mm – generous working area • Stroke: approx. 150 mm – efficient travel distance • Table size: approx. 1,000 × 1,200 mm – large clamping area Iisdpfx Aasx Ry Nye Ioc • Table height above floor: approx. 850 mm – ergonomic working height • Hydraulic control (often with PLC/Siemens control) possible • Safety and UVV certification for manual loading – increased operational safety 💡 Thanks to its robust construction, this press is ideally suited for series production, drawing and forming processes as well as machining and assembly tasks in metalworking operations. ⸻ 📌 Features & Equipment • Two-hand operation / safety control • Adjustable mechanical stop • Pressure cut-off • Pressure switch • UVV-compliant safety features → all for efficient and safe operation on the shop floor Currently UVV-certified. ⸻ 🛠️ Applications This press offers versatile usage, such as for: • Metal forming / drawing work • Assembly and joining part production • Testing and quality control processes • Series and small batch production ⸻ 📦 Size & Weight • Dimensions (approx.): Width × Depth × Height ≈ 4.0 × 3.6 × 3.4 m • Weight: approx. 16 t – robust industrial construction

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with 650 kN capacity. The machine was last in operation about 8 years ago. At that time, it had an issue with a hydraulic pipe (possibly a hydraulic oil leak or a leaking fitting). This was not repaired since the press was no longer needed. Otherwise, the machine had been running flawlessly up to that point. The press does not have UVV certification! Iodpfxex Ehmyj Aa Isic

Year of construction: 1977, condition: used, pressure 200 t distance between columns 500 mm Iisdpfslp Uz Uex Aa Ioc stroke 150 mm ram surface 320 mm table surface area 470x400 mm weight of the machine ca. 12 t dimensions of the machine ca. 2000x2000x2700 mm

Year of construction: 1976, condition: used, pressure 100 t distance between columns 625 mm stroke 150 mm table surface area 580x450 mm Iiodpfx Aaolp U Eue Ijc ram surface 580x340 mm hole in the table Ø 150 mm table height 850 mm tool hole in ram Ø 45 mm column travel -side 200x200 mm weight of the machine ca. ca. 6,0 t dimensions of the machine ca. BxTxH ca. 1300x1300x2750 mm

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Isdsv Srfwspfx Aa Isic Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: excellent (used), machine/vehicle number: 61 988, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Iodpfx Aaop H Tkie Isic

Year of construction: 2004, condition: excellent (used), WEBER 3 layer PVC foam core pipe system with: 2 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 WEBER DS 9.25 DOUBLE SCREW EXTRUDER Year of manufacture 2004 Application PVC foam core pipe (three layer) Only the extruders are sold, without feed block The screws and cylinders of the two extruders are in very good condition The system is in very good working order Iiodpfx Aaot Rcn Nj Ijc The system is my property Sahal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Germany

Condition: good (used), Year of construction: 2001, machine/vehicle number: 6028, functionality: fully functional, input voltage: 400 V, cutting width (max.): 1,200 mm, saw blade diameter: 4,000 mm, height adjustment type: hydraulic, rotational speed (max.): 6,000 rpm, rotational speed (min.): 3,000 rpm, length stop: 3,200 mm, table length: 3,200 mm, trimming length: 2,000 mm, Machine no: 6028 Types: 690 B 3000,4000,5000,6000 rpm Iedpfx Aaovl Icrs Isic Power: 3/400V/50Hz Motor: 5.5 Kw Table 2000X400 mm

Year of construction: 1991, condition: repair required (used), functionality: limited functionality, We are offering this Schön + Sandt cart beam punching machine, model 565, manufactured in 1991, which requires repair. The cart beam moves. Pressure build-up for the punching process is currently not functioning. The operating manual and wiring diagrams are available. Manufacturer: Schön + Sandt Type/Model: Cart beam punching machine 565 Year of manufacture: 1991 The machine can be inspected while powered on, subject to prior arrangement. If you have any questions or require further information, please send us a message or call us. Ijdpfx Aasy S Tf Rj Ieic Delivery terms: EXW, Incoterms 2020, Regensburg Our general terms and conditions apply. Furthermore, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear and tear of the offered items are consistent with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Iijdpfoyq R Acsx Aa Iec Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg

Condition: used, Year of construction: 2005, Working width: 630 mm Planer shaft: strip knives Number of knives: 4 Iijdpjyvz Nxjfx Aa Ijc Jointer table length: 2200 mm Jointer fence angle adjustable: yes Folding up jointer tables: manual Maximum thicknessing height: 220 mm Thickness table height adjustment: electric Display of planing thickness: scale Feed speed: 7 / 14 m/min Infeed roller: steel Outfeed roller: rubber Pressure bar: segmented Table rollers: yes Motor power: 7.5 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2200 mm Machine width: 1150 mm Weight: 1250 kg

Condition: used, Year of construction: 1987, max. wheel diameter 4400 mm gear width 645 mm max. module 35 Control Siemens main drive motor 37 kW table diameter 2500 mm ical angle +/- 30 ° workpiece weight 40000 kg total power requirement 142 kVA weight of the machine ca. 75 t Partial overhaul 2006 5 controlled axes a, c, x, y, z Max. gear outer diameter 3000 mm Max. outer diameter for internal gears 3560 mm Max. module with hobs 30 Max. module with internal form cutters 18 Min. gear diameter 900 mm Axial feed travel 1800 mm Isdpsyqt S Hefx Aa Ioic Largest axial slide travel 1800 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, The Samputensili S 500 B bevel gear cutting machine was designed as a universal machine for flexible machining of gears and is used by manufacturers in gear and transmission technology for the milling of bevel gears. Iodpfx Aaexz Ef So Ijic Technical data: Gear diameter: 500 mm Module – max.: 5 Tooth width: 100 mm Space requirement approx.: 4.5 x 3.2 x 2.4 m Machine weight approx.: 13,000 kg *The illustration shows the machine in its current used condition. Upon request, it can be supplied partially modernised, or as a completely retrofitted and modernised machine with new CNC control (SIEMENS ONE).