Used Habegger Hit Trac 64 E for sale (73,103)

Condition: good (used), 1 used electric wire rope hoist Hnjdpjy Hftcsfx Aagsl Manufacturer: Habegger (Switzerland) Model: Hit Trac 64 Technical Specifications HIT-TRAC 64 E Rated force (pulling, lifting, lowering) 6,400 kg Overload protection via thermoelement Rope speed max. 2.5 m/min Rope length unlimited Weight incl. motor 240 kg Rope diameter 20 mm Effective rope breaking load 300 kN 3-phase AC drive motor 50 Hz / 400 V, 6.8A Power output 3 kW Duty cycle 30%

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Hsdpfjyug R Rox Aagenl enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input Hodpjyug Hxefx Aagenl • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, functionality: fully functional, overall weight: 285 kg, 2 units in stock. Multiple models available, for more information please contact us. Export is possible. Hnedsyyn T Sopfx Aagol

Condition: new, functionality: fully functional, overall weight: 141 kg, Various models available. Contact us for more information. Export is possible. Hsdpfx Aaeyyn Shegjnl

Condition: new, mileage: 100 km, power: 368 kW (500.34 HP), axle configuration: 4x4, color: white, driver cabin: sleeper cab, gearing type: automatic, Equipment: ABS, EBS, air conditioning, - Brake system For vehicle inquiries, Mr. Seidel will assist you (via phone). co X-Way AS440S50T/P HI-TRACTION 4x4 tractor unit Hjdpfxoy Svtdj Aagsnl Emission standard EURO VI E, DRIVE T. 315/80R22.5, speed limiter 90 km/h, electrically operated roof hatch, transparent with MLL high roof, front underrun protection for chassis with a total mass exceeding 7,490 kg, first aid kit, hybrid bumper, electrically adjustable and heated exterior mirrors, standard cab roof insulation, COC general operating permit, 10-inch instrument cluster, fully automatic air conditioning, digital tachograph 4.1, static passenger seat, axle weight variant: front axle 8,000 kg / rear axle 11,500 kg (technically possible up to 13,000 kg), smart alternator 2880 W (24V x 120A), demand-controlled, rear axle air suspension, parabolic suspension on front axle, batteries in frame overhang, standard labeling for air tanks, rear shock absorbers, moderate climate version, 2-cylinder air compressor 630 cc, chassis frame in grey, standard total train brake, exhaust tailpipe left, air filter unit under cab, mechanical battery disconnect switch on chassis, right side, standard frame setting, trailer dual-circuit brake, fifth wheel dimension EU, trailer socket for 24 volt operation, 15-pin, rear axle ratio: i 2.85, rear overhang 1047 mm, ECO NORMAL MODE, standard gearbox mode, Connectivity Box 4G incl. TCO service contract, STANDARD SETTING CURSOR 13, tire pressure monitoring system (TPMS) with internal sensors, 4 DIN slots, VDI interface (Vehicle-Data-Interface) for telematics (FMS), version 4.0, gearbox software ECO-Roll (coasting function), adaptive cruise control (ACC), lane departure warning system (LDWS), driver drowsiness attention warning, warning triangle in accordance with ECE-27 guideline, standard catwalk behind the cab, hill start assist (Hill Holder) for comfortable starts on slopes, electronic stability program (ESP), reversing monitoring system with camera, blind spot information system (BSIS) right side, intelligent speed assist (ISA), NO HIGHWAY ASSIST, side marker lights, front area monitoring (MOIS), advanced emergency braking system (AEBS), pneumatic parking brake, prewiring for alcohol interlock (ALC) with cable, CAMBIO 12TX 2460 TD, CEE type plates, standard EU vehicle width, HI-TRACTION incl. hydraulic crawler mode, Alcoa aluminum rims, forged matte, Hi Traction preparation, PTO NH/4C with pump connection suitable for Meiller tipper or crane tipper, electrically operated cab tilting mechanism, hybrid bumper painted in cab color, AS cab with standard roof (MY24), storage compartments left and right, one-piece lower bunk, comfort/cushioning – soft, with adjustable head section, ashtray in center console, electronic immobilizer and 3rd vehicle key, switch in dashboard for the lift axle of the semitrailer, fifth wheel Jost, fifth wheel height: 150 mm + mounting plate height: 50 mm, fuel tank 480 liters, left, aluminum, AdBlue tank 135 liters with integrated step (for CM chassis and 4x2 tractor unit), 145 liters without step, override of ECO SWITCH limiter possible, expansion module for controlling PTOs, amber warning lamp,...

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Hedpfx Aoy E Ex Aeagjnl Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: used, mileage: 294,189 km, power: 375 kW (509.86 HP), first registration: 09/2022, fuel type: diesel, overall weight: 20,500 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: blue, gearing type: semi-automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Leasing or hire purchase possible, subject to a credit check. We will be happy to provide you with an offer. X-Way AS440X51T/P 4 x 4 with Hydrodrive Hi-Traction Technical permissible gross weight: 20,500 kg Technical permissible gross combination weight: 60,000 kg Engine, Transmission: * Engine F3HGE611B, 375 kW, 12,882 cc, Euro 6D * Transmission 12TX2410TO, Traxon 12-speed Assistance systems: * Hi-Traction * Creep mode * ON+ * Rocking mode * Retarder/Intarder * Hill Holder (hill start assist) * Differential lock * Emergency braking assistant AEBS * Adaptive cruise control ACC * Lane departure warning Chassis, attachments: * Axle configuration 4 x 2 * Leaf/air suspension * Aluminium tank 480 L * AdBlue Hjdpfeyy Ey Aex Aagjnl * Wheelbase 3610 * Battery cut-off switch Tyres: * Size 385/65 (condition see photos) Body: * Jost fifth wheel coupling * Tipping hydraulics Cab: * X-Way low roof * Automatic climate control * Auxiliary/park heater * Electrically adjustable and heated mirrors * Electric windows * Luxury driver's seat with climate control * Fixed passenger seat * 1 bunk * Refrigerator * Electric sunroof * Central locking with remote control * Sun visor * Touchscreen * Bluetooth * Tom Tom navigation Vehicle No.: 6891 Sale only to commercial customers or for export. Prices are net plus VAT or export. All information subject to change. PARLIAMO ITALIANO, GOWORIM PO RUSSKI, DOMLUVIME SE CESKY, WE SPEAK ENGLISH

Year of construction: 2000, condition: excellent (used), functionality: fully functional, Very well-preserved HIT curve conveyor / board or model separation, robust design, conveying height approx. 3.0 m. Board length up to 6.5 m. Sturdy chains with 6x2 slat carriers. Integrated flush roller track. Transfer cross conveyor, height-adjustable. Slab discharge flap. Driven by SEW gear motor with brake. Conveyor is split and bolted for transport. Disassembled and loaded free onto truck. Ideal for use upstream of a double edger or stacking system. Hjdpfx Aaoxl Edijgsnl

Condition: ready for operation (used), HEW R 160M/6-4 L engine , serial no. according to photo , hole spacing of mounting holes: 255 x 210 mm, Ø drive shaft: 42 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hedpfxei D Icts Aagenl

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 192378-16-001, total length: 6,000 mm, total width: 2,400 mm, total height: 2,750 mm, overall weight: 6,000 kg, Equipment: type plate available, Contact Oven "Hitec", type BG 600-3600 E continuous grilling line All stainless steel with lower and upper belt: lower and upper heating Belt temperature adjustable separately Mesh length: 3,600 mm Hnsdpfswxvqpsx Aagsl Belt width: 600 mm Electrically heated 136 kW Belt washing system Temperature range from 50 to 260°C Adjustable speed Dimensions (L x W x H): approx. 6,000 x 2,400 x 2,750 mm year: 2021 Condition: Like new

Condition: used, Year of construction: 2017, operating hours: 1,693 h, machine/vehicle number: 10001610, Weights Empty weight: 4.965 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 3.550 cm Other information Hnodpfx Aaetr Na Tegol Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1560 m Transport dimensions (LxWxH): 8.18x1.58x1.98 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2017, machine/vehicle number: 10001282, fuel type: hybrid, Weights Empty weight: 4.390 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 3.100 cm Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 1770 m Transport dimensions (LxWxH): 7.23x1.58x1.98 Hnsdpfetr Nggjx Aagol Additional information Please contact PFEIFER GROUP for more information

Condition: new, Philips 4022 226 2310 MEMO MOD 64 K card, E status and serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Hedpji Ecfhefx Aagenl

Condition: new, mileage: 2 km, power: 425 kW (577.84 HP), fuel type: diesel, tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 42,000 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electric window regulation, power assisted steering, retarder, traction control, - Autoradio - CD - Halogen headlights - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels = Additional options and accessories = - Air horn - Air Suspension Seats - All wheel drive - Aluminium fuel tank - Bluetooth - Coupling - Heater - Leaf spring suspension - Sleeper cab = Remarks = The Mercedes-Benz Arocs 4058 AS 6x6 Chassis Cabin is a powerful and versatile truck, developed for heavy transport and challenging working conditions. With its impressive engine power, reinforced chassis, and permanent all-wheel drive, this truck provides an excellent base for a wide range of applications within mining, heavy construction projects, and logistics in remote areas. Specifications Mercedes-Benz Arocs 4058 AS 6x6 Chassis Cabin: - Drive: 6x6, with permanent all-wheel drive for maximum traction and off-road capabilities. - Maximum gross vehicle weight (GVW): 40 tons, suitable for the heaviest transport tasks. - Axle configuration: Front axle 9 tons, rear axles 2x 16 tons, with planetary final drive. - Engine: OM 473 inline 6-cylinder, 15.6-liter Euro 3 diesel engine. - Power: 578 hp (425 kW), for powerful performance under heavy load. - Torque: 2800 Nm, ideal for steep slopes and tough terrain. - Transmission: Mercedes PowerShift 3 automatic gearbox with Turbo Retarder Clutch. - Wheelbase: 4200 mm, with fifth wheel position at 1050 mm. - Tires: Heavy-duty Goodyear OMNITRAC S HD 325/95 R 24 off-road tires on all axles. Advantages: - Versatility: Extremely suitable for trailer transport with heavy loads, mining tractors, crane trailers, or tank trailers in rough conditions. - Superior off-road performance: Thanks to the permanent 6x6 drive, heavy-duty suspension, and reinforced chassis, excellent mobility in extreme situations. - Fully equipped: Standard features include a powerful engine brake, dual PTOs, Turbo Retarder Clutch, air and electric connections for trailers, and advanced safety systems. Applications: The Arocs 4058 AS 6x6 is the ideal choice for: - Mining: For transporting heavy trailers with ore, stones, and bulk goods. - Heavy construction projects: Suitable for transporting machinery and materials to hard-to-reach locations. - Logistics in remote areas: Reliable tractor where standard vehicles fall short. - Defense and humanitarian aid: Deployable as a tank trailer or container tractor in extreme conditions. Hsdpfxsy Rym Es Aagjnl Extra Options and Accessories: - Hydraulic system: PTO MB 131-2c for heavy pumps and hydraulic bodies. - Batteries: 2 x 12V/220Ah maintenance-free. - Cabin: L-cab ClassicSpace with luxury bed, air conditioning, radio with USB and Bluetooth, USB-C ports, and mechanical-hydraulic tilting mechanism. - Safety: ABS with deactivation option, Hill Start Assist, LED daytime running lights, extra work light preparation, and protective grilles for lighting. - Other equipment: Cyclone air filter, 390-liter fuel tank with protective plate, dual air horns, and 2 LED beacon lights. Dimensions: - Length: approx. 7,500 mm - Width: 2,500 mm - Height: approx. 3,500 mm (depending on body) Sustainability and safety come first: This truck meets the strictest quality and safety standards and is fully equipped for the toughest assignments, both on- and off-road....

Condition: new, mileage: 1 km, power: 425 kW (577.84 HP), fuel type: diesel, tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 42,000 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electric window regulation, power assisted steering, retarder, traction control, - Autoradio - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights = Additional options and accessories = - Air horn - Air Suspension Seats - All wheel drive - Aluminium fuel tank - Bluetooth - Coupling - Heater - Leaf spring suspension - Sleeper cab = Remarks = The Mercedes-Benz Arocs 4058 AS 6x6 Chassis Cabin is a powerful and versatile truck, developed for heavy transport and challenging working conditions. With its impressive engine power, reinforced chassis, and permanent all-wheel drive, this truck provides an excellent base for a wide range of applications within mining, heavy construction projects, and logistics in remote areas. Specifications Mercedes-Benz Arocs 4058 AS 6x6 Chassis Cabin: - Drive: 6x6, with permanent all-wheel drive for maximum traction and off-road capabilities. - Maximum gross vehicle weight (GVW): 40 tons, suitable for the heaviest transport tasks. - Axle configuration: Front axle 9 tons, rear axles 2x 16 tons, with planetary final drive. - Engine: OM 473 inline 6-cylinder, 15.6-liter Euro 3 diesel engine. - Power: 578 hp (425 kW), for powerful performance under heavy load. - Torque: 2800 Nm, ideal for steep slopes and tough terrain. - Transmission: Mercedes PowerShift 3 automatic gearbox with Turbo Retarder Clutch. - Wheelbase: 4200 mm, with fifth wheel position at 1050 mm. - Tires: Heavy-duty Goodyear OMNITRAC S HD 325/95 R 24 off-road tires on all axles. Advantages: - Versatility: Extremely suitable for trailer transport with heavy loads, mining tractors, crane trailers, or tank trailers in rough conditions. - Superior off-road performance: Thanks to the permanent 6x6 drive, heavy-duty suspension, and reinforced chassis, excellent mobility in extreme situations. - Fully equipped: Standard features include a powerful engine brake, dual PTOs, Turbo Retarder Clutch, air and electric connections for trailers, and advanced safety systems. Applications: The Arocs 4058 AS 6x6 is the ideal choice for: - Mining: For transporting heavy trailers with ore, stones, and bulk goods. - Heavy construction projects: Suitable for transporting machinery and materials to hard-to-reach locations. - Logistics in remote areas: Reliable tractor where standard vehicles fall short. - Defense and humanitarian aid: Deployable as a tank trailer or container tractor in extreme conditions. Hnjdpjy Rt Nmjfx Aagjl Extra Options and Accessories: - Hydraulic system: PTO MB 131-2c for heavy pumps and hydraulic bodies. - Batteries: 2 x 12V/220Ah maintenance-free. - Cabin: L-cab ClassicSpace with luxury bed, air conditioning, radio with USB and Bluetooth, USB-C ports, and mechanical-hydraulic tilting mechanism. - Safety: ABS with deactivation option, Hill Start Assist, LED daytime running lights, extra work light preparation, and protective grilles for lighting. - Other equipment: Cyclone air filter, 390-liter fuel tank with protective plate, dual air horns, and 2 LED beacon lights. Dimensions: - Length: approx. 7,500 mm - Width: 2,500 mm - Height: approx. 3,500 mm (depending on body) Sustainability and safety come first: This truck meets the strictest quality and safety standards and is fully equipped for the toughest assignments, both on- and off-road. ...

Condition: used, Year of construction: 2014, machine/vehicle number: 78300122, Drive type: Diesel, power: 308 kW, displacement: 10,600 cc, unladen weight: 16,170 kg, permitted total weight: 18,000 kg, with 2 driven axles, recorded mileage: 64,407 km, operating hours: 7,640 hrs, with category 4 rear hitch, mechanical, hydraulic top link, cat. 3, mounting for front weight, 5 additional control valves with breakaway couplings at the rear, rear PTO 1,000 rpm, PTO shaft 1 3/4, 6-spline, engine OM470 K 97/68 308 kW t4, fuel tank extension by 190 liters, refrigerator, semi-active cab suspension, fire extinguisher, GPS Pilot S10 RTK radio; NOTE: Steering shows error message Hnodoy Rvlkopfx Aagol

Condition: good (used), Tool holders for milling chucks, spindle head holders, modular tool pockets, tool holder sets, assembly trolleys, CNC transport trolleys -Assembly trolley: for 64 pieces of SK50 tool holder -Transport trolley: heavy-duty design -Number: 2 trolleys available, 1 with 2 swivel casters / 1 with 4 swivel casters Hnodpfxen D Uraj Aagjl -Price: per trolley -Dimensions: 1140/500/H930 mm -Weight: 60 kg / 63 kg

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, Cheese vat / Pasteuriser / Process tank 350 liters. Custom engineered for a German Goat Cheese Dairy Used - Untested - Please read The Vat: - Manufacturer: Edmund Erdmann (Germany) - Year: 2004 - Completely stainless steel 1.4301 / AISI 304 - Inside: polished / outside: Glass bead blasted - Diameter inside / outside: 100 cm / 117 cm Depth inside: 49 cm - Empty weight: 850 kg (according to manual) - Double jacket (no insulation) - Hot water circulation system with built-in heating elements (8 x 4,5 kW = 36 kW) - Volume: 350 liters - Butterfly valve, DN 65 - 2-part cover - Gate-Agitator (removable) mounted on a bridge. Can be raised with a lever (see photo';s). - Agitator motor: 0,37 kW / 20 RPM - Brand: KEB - in working condition (tested) - Circulation pump: Brand: Wilo - Several (safety) sensors (cover - butterfly valve) - Magnetic valves - Temperature sensor PT100 - Custom engineered / Very solid tank and construction. Control Cabinet - 2 thermostats - Temperature recorder - Several switches for: - Agitator - Heating - Incubation - Circulation pump - Magnetic valve - cooling water - Heating elements (on/off) Please take a look a the photo's A German user-manual is included. IMPORTANT: This machine is sold "Untested" - "as is" This machine came from a business closure and was already disassembled when purchased. We have never assembled and tested this machine. It is very likely that several parts need to be replaced. The machine is sold as NOT Running. You will have extra costs. We did test the agitator motor and it runs. Price is based on the value of the jacketed tank. Hnsdjy N Dagjpfx Aagel With some adjustments this tank can be heated with an external heating. The vat comes with a lot of cable. Some of these cables are damaged. The control cabinet used to be "built in" a wall. The vat comes with a manual and parts-list.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 2500-A-BBBBCBAB/2600-A-FBBBCBAA, Wiesheu Duo baking oven in very clean condition. Concerns baking ovens; - Euromat 64 S Backofen 2500-A-BBBBCBAB - Euromat 64 L Backofen 2600-A-FBBBCBAA Hjdpfjt R Tlxox Aagenl For more information please contact.

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, DGUV certified until: 05/2027, NEW NEW Baking Decks NEW NEW Hnjdpfx Aastp D Thogel Model: Modul 5-64 Modular deck oven with ceramic stone base For trays 1 x 40/60 per deck Programmable control with night start function Baking chamber internal dimensions: 630x550x180mm (WxDxH per deck) Stainless steel construction Temperature up to max. 350°C DGUV V3 tested exclusively by us Connection: 400V, 15 kW, 5 x 16A CEE plug Dimensions: 990 x 1000 x 440 mm (WxDxH per deck) Brand new machine & SAB inspected With warranty & spare parts service Water connection 3/4 inch, water drain DN 40 Options: Leasing & rental service Extractor hood with condenser Mobile base frame with tray shelf Proofing cabinet Loader apparatus Manual loader Maintenance contract Delivery service Service package Instruction & commissioning More deck ovens in stock!

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: 2026, total length: 1,000 mm, total width: 990 mm, input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 12 months, DGUV certified until: 05/2027, Equipment: CE marking, NEW +++ Oven +++ NEW Modular deck oven with stone plate for trays 1 x 40/60 per deck Simple programmable control with night start Robust stainless steel construction Temperature up to max. 350°C DGUV V3 tested only by us Hsdpfetp D Snex Aagenl Connection: 400V, 16A CEE plug Dimensions: 990 x 1000 x 440 mm (W x D x H) per deck Brand new unit & SAB tested 24 months warranty + spare parts service Options: Leasing & rental service Extraction hood with condenser Mobile underframe with tray rack Proofing cabinet Peel device Manual loader Maintenance contract Service package Delivery service Commissioning & instruction More ovens in stock!

Condition: used, mileage: 390,709 km, power: 294 kW (399.73 HP), first registration: 05/2013, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2013, WDB9642241L802395 Hnodpfxsyzq Two Aagel = More information = Registration number: 2AEK977 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), Year of construction: 2005, operating hours: 15,742 h, functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Heidenhain, controller model: 530, spindle speed (max.): 18,000 rpm, DMC 64V linear / Year of manufacture 2005 Heidenhain control 530 3-axis machining center 30-position tool changer Travel: X640mm (linear drive) Y600mm Z520mm Spindle: SK40 Max. speed: 18000 rpm Max. feed rate: 40000mm/min Hnodpfxoy Iw H Re Aagsl

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 264 h, load capacity: 8,000 kg, lifting height: 4,705 mm, free lift: 1,255 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 600 mm Hnjdpfxsx I Tc Uo Aagjl Fork width: 150 mm Fork thickness: 70 mm Mast type: Triplex Condition: Refurbished with warranty Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Battery voltage: 80V Battery capacity: 1240Ah Battery year of manufacture: 2021 Battery condition: 80 - 100% Description: LIKE NEW CONDITION!!! CONDITION LIKE NEW!!! Side shifter, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heater, STVZO, full cabin, full free lift, CE certificate, safety light, interior mirror, seat heating, LED.