Used Grundfos Pumping Set for sale (17,079)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection Dksdpsyug R Rofx Aa Hst • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Dodjyug Hxjpfx Aa Hskt Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Year of construction: 2020, functionality: fully functional, overall weight: 24 kg, total length: 250 mm, total width: 141 mm, total height: 306 mm, volume flow: 20 m³/h, operating pressure: 10 bar, power: 0.34 kW (0.46 HP), input voltage: 230 V, input frequency: 50 Hz, input current: 160 A, type of cooling: water, rotational speed (max.): 1,450 rpm, protection type (IP code): IP44, Grundfos UPC 40-60/4 F Circulation Pump – 230 V – DN40 – 250 mm For Sale: Grundfos UPC 40-60/4 F circulation pump. The Grundfos UPS 40-60/4 F is a robust, professional circulation pump designed for heating, central heating, HVAC, and various water circulation systems. The pump features 3 selectable speed settings, allowing its performance to be adjusted according to the installation's requirements. Dkedszx Urvjpfx Aa Hjt Technical Specifications Manufacturer: Grundfos Model: UPS 40-60/4 F Type: Wet-rotor circulation pump Number of speeds: 3 Power supply: 1 × 230–240 V Frequency: 50 Hz Power input – Speed 1: Approx. 195 W Power input – Speed 2: Approx. 260 W Power input – Speed 3: Approx. 340 W Current – Speed 1: Approx. 1.15 A Current – Speed 2: Approx. 1.40 A Current – Speed 3: Approx. 1.60 A Maximum head: Approx. 6 m Connection: DN40 Flange standard: DIN Pressure rating: PN6 / PN10 Installation length: 250 mm Maximum operating pressure: 10 bar Liquid temperature range: -10 °C to +120 °C Protection class: IPX4D Insulation class: H Applications Suitable for applications including: Central heating systems Commercial heating installations HVAC systems Water circulation systems Technical installations Industrial heating and cooling systems The three selectable speed settings make it possible to adjust the pump performance to the requirements of the circulation system. The pump is supplied as shown in the photographs. VADO Technische Groothandel – Uden, The Netherlands VADO specializes in pumps, installation technology, heating systems, water technology, and industrial applications. For technical questions about this pump or its suitability for your installation, please feel free to contact us. Collection: Available by appointment in Uden, The Netherlands. International shipping: Shipping within Europe and worldwide can be arranged. Please contact us for shipping options and costs. Please note: As this model was produced in different versions, we recommend checking the pump nameplate before purchase to confirm the exact electrical specifications and suitability for your installation.

Condition: new, functionality: fully functional, overall weight: 17 kg, total length: 328 mm, total width: 141 mm, total height: 310 mm, volume flow: 0.6 m³/h, operating pressure: 10 bar, final pressure: 0.6 bar, power: 0.18 kW (0.24 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 21 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,800 rpm, protection type (IP code): IP44, Grundfos UPC 32-60 Circulation Pump – 3-Phase 400 V – DN32 For Sale: Grundfos UPC 32-60 circulation pump, 3-phase version for 3 × 400–415 V / 50 Hz. The Grundfos UPC 32-60 is a robust, professional circulation pump designed for heating systems, central heating installations, HVAC systems, and various technical and industrial circulation applications. The pump is equipped with a DN32 flanged connection and has an installation length of 220 mm. It features 3 selectable speed settings, allowing the pump performance to be adjusted to the requirements of the installation. Technical Specifications Manufacturer: Grundfos Model: UPC 32-60 Pump type: Circulation pump Phase: 3-phase Power supply: 3 × 400–415 V Frequency: 50 Hz Current: 0.21 / 0.23 / 0.39 A Maximum power input: Approx. 0.185 kW Number of speed settings: 3 Maximum head: Approx. 6 m Maximum flow rate: Approx. 12–13 m³/h Connection: DN32 flange Installation length: 220 mm Maximum operating pressure: 10 bar Protection class: IP44 Insulation class: F Weight: Approx. 17.3 kg Applications The Grundfos UPC 32-60 is suitable for applications including: Central heating systems Heating installations Dkedpfxozx U Hye Aa Hst Hot-water circulation HVAC systems Technical installations Water circulation systems Industrial heating and cooling installations The Grundfos UPC 32-60 is a reliable and robust solution for existing installations where a traditional 3-speed circulation pump is required. VADO Technische Groothandel – Uden, The Netherlands VADO specializes in pumps, installation technology, heating systems, water technology, and industrial applications. For technical questions about this pump or its suitability for your installation, please feel free to contact us. Collection: Available by appointment in Uden, The Netherlands. International shipping: Shipping within Europe and worldwide can be arranged. Please contact us for shipping options and costs. Please note: This is an older Grundfos pump series. We recommend checking the pump nameplate and performance requirements before purchase to ensure that the pump is electrically and hydraulically suitable for your installation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, controller model: SINUMERIK 840D SL, laser power: 3,200 W, sheet thickness (max.): 20 mm, working length: 3,000 mm, working width: 1,500 mm, The machine was exclusively serviced by Trumpf until 2023 as part of a maintenance contract. TECHNICAL DETAILS Working length: 3,000 mm Working width: 1,500 mm Working height: 115 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 115 mm Maximum workpiece weight: 900 kg Sheet thickness steel max.: 20 mm Sheet thickness stainless steel max.: 12 mm Sheet thickness aluminum max.: 8 mm Sheet thickness max.: 20 mm Feed rate X-axis: 100 m/min Feed rate Y-axis: 200 m/min Feed rate Z-axis: 80 m/min Cutting speed: 140 mm/min Positioning speed X/Y-axis: 140 m/min Repeat accuracy: 0.05 mm Smallest programmable step: 0.001 mm MACHINE DETAILS Laser type: CO₂ laser Laser source manufacturer: Trumpf Laser source model: TruFlow 3200 Laser power: 3,200 W Laser wavelength: 10,600 nm Cooling type: Water Control type: CNC control Control manufacturer: Siemens Control model: SINUMERIK 840D SL Automation level: Semi-automatic Operating type: Electric Input voltage: 400 V Input current: 100 A Input frequency: 50 Hz Dksdpfezyakgsx Aa Hst Dimensions & Weight Dimensions (L x W x H): 6,500 x 7,600 x 2,200 mm Total weight: 12,000 kg Laser hours NC control: 35,623 h Laser hours resonator / pump 1: 34,258 h Laser hours beam on / pump 2: 10,155 h EQUIPMENT CE marking Central lubrication system Cooling unit Documentation / manual Dust extraction Emergency stop switch Safety light curtain

Condition: new, Year of construction: 2022, functionality: fully functional, NEW Grundfos Pump CRN 10-12 A-FGJ-G-E-HQQE | Stainless Steel AISI 316 | 4 kW Condition: Brand new, never used. Model: CRN 10-12 A-FGJ-G-E-HQQE Manufacturer: Grundfos (Leading pump solutions provider) DEVICE DESCRIPTION The item for sale is a high-performance, vertical multistage centrifugal pump from the CRN series. This is a version made entirely from acid-resistant stainless steel (AISI 316), setting it apart from the standard cast iron models (CR). It is designed for operation in the most demanding industrial conditions, ensuring reliability when handling aggressive and demanding liquids. The pump is an ideal solution for businesses seeking a high-efficiency device, ready for immediate installation in water treatment systems, technological processes, or high-pressure setups. _____ KEY TECHNICAL DATA • Rated flow: 10 m3/h • Rated head: approx. 96.7 m (max up to 122 m) • Motor power: 4 kW • Power supply: 3-phase • Rotational speed: 2900 rpm • Maximum operating pressure: 25 bar • Liquid temperature range: -20°C to +120°C • Number of impellers: 12 Dkedpex Im Ahefx Aa Hot • Year of manufacture: 2022 CONSTRUCTION AND MATERIALS • Material configuration (G): All liquid-contacting parts are made from stainless steel EN 1.4401 / AISI 316 (providing maximum corrosion resistance). • Shaft seal (HQQE): Durable cartridge mechanical seal made from silicon carbide (SiC/SiC) with EPDM elastomers. Guarantees longevity and leak-tight operation even with hot water. • Connection (FGJ): Universal flanged system (DIN/ANSI/JIS), allowing easy adaptation in existing installations. _____ APPLICATIONS Thanks to its acid-resistant construction, the CRN pump is suitable for: 1. Chemical and pharmaceutical industries (pumping acids, alkalis, aggressive media). 2. Filtration and water treatment systems (reverse osmosis, ultrafiltration). 3. Industrial washing systems and CIP/SIP cleaning setups. 4. Process water installations in brewing, dairy, and food industry. _____ WHY BUY THIS PUMP? • Premium product: The CRN series is the “Mercedes” among vertical pumps. • Time-saving: Device is available immediately (no long lead times from the manufacturer). • No usage marks: The pump is brand new, properly stored, and ready to operate at full capacity. Important: Please verify that the electrical and hydraulic parameters match your project requirements before purchase.

Year of construction: 2023, condition: used, Pump speed 2.924 U/min Nominal delivery flow 21 m³/h Rated head 95,1 m Capacity 11 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Dkodpfx Aozbvguea Hjt

Condition: new, functionality: fully functional, overall weight: 8 kg, total length: 328 mm, total width: 95 mm, total height: 130 mm, volume flow: 9 m³/h, operating pressure: 10 bar, final pressure: 0.5 bar, power: 0.17 kW (0.23 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, type of input current: three-phase, type of cooling: air, rotational speed (max.): 2,800 rpm, protection type (IP code): IP42, For Sale: Grundfos UP 40-50 F Circulation Pump This robust Grundfos circulation pump is suitable for use in heating, central heating, cooling and HVAC systems. The UP 40-50 F is equipped with DN40 flange connections and is suitable for a 3-phase power supply of 3 × 400 V / 50 Hz. The pump belongs to the reliable Grundfos UP series and is designed for continuous circulation of water in professional technical installations. The maximum head is approximately 5 metres, and the pump has an installation length of 250 mm. Technical Specifications Manufacturer: Grundfos Model: UP 40-50 F Type: Professional circulation pump Power supply: 3-phase Voltage: 3 × 400 V Frequency: 50 Hz Connection: DN40 flange connections Installation length: 250 mm Maximum head: approx. 5 m Maximum operating pressure: up to 10 bar Housing: Robust cast iron construction Djdpfxjzx Ux As Aa Hokt Suitable for heating, HVAC, cooling and other circulation systems Designed for professional and industrial installations VADO Technical Wholesale – Uden, The Netherlands VADO specialises in pumps, installation technology, heating systems, water technology and industrial applications. If you have any technical questions regarding the application, specifications or suitability of this pump, please feel free to contact us. Collection: Available by appointment in Uden, The Netherlands. Shipping: Worldwide/international shipping can be arranged. Please contact us for further information, availability or shipping costs.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Dsdpeyi H Eqjfx Aa Hjkt Weight: 1200 kg self-starting water cooling built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: new, For sale: new Grundfos CRN5-11 vertical multistage pump. The pump has never been used and comes from warehouse surplus. The equipment is in excellent condition, stored in its original packaging. Manufacturer's documentation included in the set. Grundfos CRN series pumps are designed for use in industrial and water installations. They are characterized by high performance, reliability, and excellent build quality. Dodpsyubcnofx Aa Hskt Technical data Manufacturer: Grundfos Model: CRN5-11 A-P-A-E-HQQE Motor power: 2.2 kW Frequency: 50 Hz Rotational speed: 2899 rpm Capacity: 5.8 m³/h Head: up to 56.5 m (max 76 m) Maximum pressure: 25 bar Maximum temperature: 120°C The pump is made of stainless steel, suitable for use in water installations, industrial systems, pressure systems, process installations, and water treatment systems. Condition: new, never used.

Condition: like new (used), functionality: fully functional, machine/vehicle number: Grundfoss CR 30-20, Grundfoss water pump, unused, but kept as a spare in the warehouse. Now it needs to be sold; the original purchase price was over 4,000. See the photos. The price is quoted excluding VAT (21%) and is for pickup in Uden. Shipping is possible; please inquire! CR 30-20, 27 m3 maximum flow rate / maximum pressure 2.4 bar, 24 meters, 400 volts. VADO in Uden supplies all types and sizes of pumps. Just get in touch. Djdpfx Aszuui Tea Hokt

Condition: used, Submersible Pump, Multi-stage Centrifugal Pump, Grundfos SP27-19, Used Machine Manufacturer: Grundfos Type: SP 27-19 Technical Specifications: Nominal Flow Rate (Q): 14–36 m³/h Maximum Head (H max): 172 meters Motor Power: 15 kW Electrical Data: 380V / 50 Hz Weight: 100 kg Dimensions: Overall Dimensions: 2300 mm (Length) x 131 mm (Diameter Ø) Dodpfxoyz Tphs Aa Hskt Recommended Operating Range: Equipped with a 15 kW motor, this pump is ideal for applications requiring water delivery from depths or to heights between 100 and 140 meters. Within this range, the 15 kW motor operates with optimal efficiency and maximum reliability.

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Djdpfxsirfblj Aa Hskt Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. 1,1 kW

Condition: used, functionality: unexamined, machine/vehicle number: TSH 065 D, Used Pfeiffer TSH 065D with Mass Spectrometer. Complete set! Turbo pump: Pfeiffer TSH 065 D (Controller Pfeiffer TCP 015) Dkjdpfx Aaow H Np Io Hot Diaphragm pump: Vacuubrand MZ 2 NT Mass Spectrometer: Balzers QME 064 + Partial Pressure Gauge Printer: Philips PM8222 recorder Complete with many vacuum components.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Dkedpoywpahsfx Aa Hst Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: good (used), functionality: fully functional, Main pump Moog RKP 63 Model 0514 700 169 Displacement 63 cm³/rev Axial piston pump Breuninghaus Model A10VSO 18DR/31R Displacement 18 cm³/rev Dodpey Uaz Rofx Aa Hokt Pumps removed from a functioning Arburg 270-90-500 injection molding machine Clamping force 50 tons

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT - Smartouch touchscreen control Dksdpfjzv Rcrjx Aa Hst - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Year of construction: 2017, condition: good (used), Required air-pressure 7 bar weight 3 kg dimensions of the machine ca. 212 x 265 X 200 mm BxHxT Air Operated Diaphragm Pump Type(s) DL15-PM-TTT Technical data: - Connection size medium - 1/2" BSPT female thread - Material housing - PP polypropylene - Center section - PP polypropylene - Diaphragm material - PTFE - O-ring material - PTFE - Check valve material - PTFE - Max. flow rate - 2.2 m³/h Dkedoy Ty Axopfx Aa Hst - Max. medium pressure - 7 bar - Compressed air supply - up to 7 bar - Solid size max. - 2.5 mm - Dry suction max. - 2.5 m - Dimensions WxHXT - 212 x 265 X 200 mm - Net weight - 3.5 kg PTFE diaphragm for the highest chemical requirements, very good resistance to aggressive media and chemicals, temperature range: -5 °C - +130 °C. PP polypropylene housing is highly resistant to acids, many water-soluble, inorganic acids and bases. Also available as electrically conductive housing material. Temperature range: 0°C - +60°C

Condition: used, power capacity / kW volt / V ampere / A MOOG HY Radial Piston Pump D951 - 2087/D / HPR18A1RKP019SM28B1Z00 / 100086299 / NEW Dkodpfozlum Tsx Aa Hjt Condition: New & Boxed

Condition: used, feed pressure / bar liter capacity / l Dkjdpfx Aaszcgipj Hjt power capacity 5,5 kW

Condition: excellent (used), Professional hydraulic set from the renowned manufacturer HURST / Hale Fire Pump Co., used in technical rescue applications (fire brigade, rescue services). ——— Djdeyxr Dxopfx Aa Hekt Condition: Used, fully operational, and tested equipment Shows normal signs of use as seen in the photos Technically in good condition – ready for work ——— Technical specifications: • Model: SP 45 • Manufacturer: Hale Fire Pump Co. / HURST • Year of manufacture: 1992 • Operating pressure: 350 BAR • Power supply: 230V (single-phase) • Standard: DIN 14751 ——— Set includes: • HURST hydraulic pump • Hydraulic shears • Spreader • Hydraulic hoses (2 pcs.) • Cable drum • Set of quick couplings • Transport frame ——— Applications: • Road rescue • Technical work and demolition • Rescue services / Volunteer / Professional fire brigades • Industry (spreading, cutting) ——— Advantages: • Robust, professional construction • High cutting and spreading force • Proven HURST technology • Complete set – ready for immediate use

Condition: like new (used), Grundfos NB 32-200/206 Single-stage block pump, centrifugal pump Speed: 2915 min⁻¹ Flow rate Q: 33.7 m³/h Head: 46.3 m Max. pressure: 16 bar You are welcome to visit us for an inspection. Dedpfxozzllxe Aa Hskt We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, feed pressure / bar Dodpfx Aasy S D D Re Hokt liter capacity / l power capacity 17,3 kW

Condition: used, feed pressure / bar liter capacity / l power capacity / kW KSB ETAPRIME 4.14 222 GB09 close-coupled pump Dkedpfx Aajy Suzaj Hot Weight: 45kg

Condition: like new (used), Grundfos MGE100LA 2-FF215-JA-300 pump 3.00 kW Dkjdpfx Ajzzmhzea Hot Speed: 2900 - 4000 rpm Weight: 24 kg You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.