Used Grieser Labor Stativ Dissolver Gfd 11 Lst for sale (14,076)

Condition: used, GRIESER Type: GFD 11 LST Product: Grieser Laboratory Stand Dissolver Intended Use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can range from thin to pasty. Machine Design: The laboratory stand dissolver consists essentially of the machine stand, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the collet chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (customer-supplied) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed control via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is carried out by switching on the lifting motor. This runs only as long as the push buttons (two-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains in any desired position. Lowering the mixing tool drive To lower the arm, the corresponding buttons (two-hand safety circuit DOWN-DOWN) on the control panel are pressed. Mixing tool change The mixing tool shaft is provided with an M8 connection thread. Depending on the requirement, the mixing tool (stirring blade, customer-supplied) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Kdsdpfx Ajzdtfljkpju Year of construction: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) customer-supplied Mixing tool: Stirring blade, customer-supplied Control panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". Safety-relevant functions such as disconnection from the mains via the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber are excluded. The control panel consists of an illuminated LCD display and film-covered tactile buttons. The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be switched through using the up and down buttons. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2025, operating hours: 40 h, condition: ready for operation (used), functionality: fully functional, Commercial LST 60L Chocolate Melanger – 2026 – Light Commercial Use We are selling our LST 60L commercial chocolate melanger following the closure of our recently launched premium protein bar production facility in London. The machine was purchased new in 2026 specifically for our own food production and has had relatively light commercial use. It is in good working condition and is ready for production. The machine has a custom-made spiral stone grinding system, designed to provide a finer and more consistent grind and improved refining of chocolate and cocoa products. It is suitable for a range of applications, including: Chocolate production Cocoa nib grinding and refining Kdodjz Dw Arjpfx Akpou Nut butters Praline Nut-based fillings Chocolate and nut spreads Other confectionery and food applications Videos of the machine in operation are available and can be provided to serious buyers. We are closing the complete production facility, so other food-production machinery is also available, including: Protein bar extruder Automatic flow-wrapping machines Planetary mixers Blixers Chocolate processing equipment Other production and packaging equipment The equipment was purchased for our own production and is being sold due to the closure of the facility, rather than because of any issue with the machinery.

Condition: used, GRIESER Type: VPL 3.0 Total volume of the mixing chamber: 3.0 liters Usable volume: 0.3 to 2.0 liters Pressure in the mixing chamber: 0 to 1.2 bar (absolute) Pressure in the stainless steel double jacket: N/A Critical speed: 1800 rpm Speed range under load: Impeller mixing tool: 38-282 rpm Scraper: 9-90 rpm Kjdpfx Aszix Ehskpjdu Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3 kW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold from our location! Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, functionality: unexamined, machine/vehicle number: LD 50, Used Pendraulik LD 50 laboratory dissolver Manufacturer: Pendraulik-Ruhrwerk Model: LD-50 Kdodpfxsxp Hw Es Akpsu Max 8,400 rpm

Year of construction: 2009, condition: ready for operation (used), A complete Grieser vacuum dissolver system for the production of homogeneous paste mixtures is available. 1) High-performance vacuum dissolver Grieser GFVD 750 FU, year of manufacture: 2009, drive power: 75kW, mixing shaft speed: 1500rpm, total volume: 550l, mixing volume: 400l, mixing tool diameter: 450mm, vacuum output: 160m³/h, weight: approx. 2800kg. 2) Fluidizing container Grieser FB 2000, year of construction: 2009, total volume: 2000l, usable volume: 1300l, emptying capacity: 10l/min, discharge speed: 0.9m/s, weight: approx. 2000kg. 3) Big bag emptying station. 4) Pump system for liquid components, type: IBC, number of IBCs: 4, volume: 1000l. 5) Centrifugal fan V30/2, volume flow: 410m³/h. Documentation available. On-site inspection is possible. Ksdewtg Ihjpfx Akpjdu

Year of construction: 2004, condition: ready for operation (used), A Grieser pilot plant vacuum dissolver for highly viscous liquids is available. Volume: 150l, dissolver output: 22kW, vacuum pump output: 2.2kW, toothed disk diameter: 250mm, toothed disk speed: 1800rpm. Including hydraulic unit for the lifting column, hopper, sight glass with lamp, product temperature sensor, explosion-proof design and switch cabinet with inert gas flushing. Documentation available. On-site inspection is possible. Kdedpfx Akoucw Tpopsu

Condition: used, This listing is for a Leitz Laborlux 11 Microscope Objectives 10/0.25 40/0.65 100/1.25 Kdedexzhuvspfx Akpou

Condition: used, machine/vehicle number: Tornio CNC Padovani Labor usato trifase, Used Padovani Labor CNC lathe, three-phase. Robust Italian parallel lathe, Labor model with spindle speed potentiometer. Three-phase motor, integrated monitor, solid Padovani construction from the 1980s-1990s. Shipping costs for this machine tool are the responsibility of the customer, who can arrange transportation using their own means or their own carriers. Transportation is the responsibility of the buyer, or you can request a quote using our transport services. TECHNICAL DATA: MACHINE DIMENSIONS: Machine footprint 2510x950x1800 mm Kdjdoz E H I Tspfx Akpju Gross weight 1500 kg LATHE SPECIFICATIONS: Spindle bore diameter 200 mm ACCULOCK Tailstock type MT4 Spindle speed from 20 to 2000 with potentiometer Max turning diameter 230 mm above the lathe bed; 400 mm below the lathe bed Distance between centers 1100 mm Lathe bed width 290 mm Spindle diameter 52 mm Bar passage diameter 52 mm Longitudinal and transverse feed Automatic Taper attachment MT4 Coolant pump yes - three-phase motor MOTOR Power 380 V Type Three-phase

Condition: excellent (used), mileage: 934,865 km, first registration: 02/1984, fuel type: diesel, tire size: 12.00 R20, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, suspension: steel, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 1984, Equipment: ABS, = Additional Options and Accessories = - Aluminum fuel tank - Radio/cassette player - Sun visor - Analog speedometer = Additional Information = Cab: simple Brakes: disc brakes Suspension: leaf spring suspension Kdjdpfx Aszin H Uokpju Front axle: tire size: 12.00 R20; max. axle load: 7500 kg; tire tread depth left: 20%; tire tread depth right: 20% Rear axle: tire size: 12.00 R22.5; max. axle load: 12000 kg; tire tread depth left: 30%; tire tread depth right: 30% Unladen weight: 7,150 kg Technical condition: very good Optical condition: very good Damage: none

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Kodpsym U Sysfx Akpedu Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm.

Condition: excellent (used), Dissolver Niemann KDV 1500-136 Ex-protected design Power: 100 kW Kjdpfjz I Rh Aox Akpsdu Speed range: 270-800 rpm Niemann speed control Electric container chuck Complete with control cabinet Documentation available In very good condition, directly from production!!!

Condition: ready for operation (used), Alsthom Parvex NFC 53 220 / AMS 2300515 Power Supply SN: 2411,used, minor signs of wear, 100% functional, scope of delivery as per photos Kdjdpfxjtvcrts Akpju

Condition: excellent (used), Dissolver Niemann KDV 790-79 Kjdpfx Aksz I N Unepedu Previously used, protected design Power output: 58 kW Speed range: 290-1000 rpm Complete with control cabinet Documentation available In very good condition, directly from production!!!

Condition: like new (used), Year of construction: 2008, operating hours: 104 h, functionality: fully functional, machine/vehicle number: 42603/08, pressure: 8 bar, operating pressure: 6 bar, total width: 3,000 mm, total height: 5,200 mm, total length: 6,800 mm, inner dimension width: 1,100 mm, inner dimension length: 6,800 mm, inner dimension height: 500 mm, filter area: 1 m², input current: 95 A, input voltage: 380 V, control cabinet width: 1,200 mm, control cabinet length: 500 mm, control cabinet height: 2,200 mm, air pressure: 8 bar, passage height: 500 mm, space requirement width: 4,000 mm, space requirement length: 9,000 mm, space requirement height: 6,000 mm, power: 50 kW (67.98 HP), conveyor belt width: 1,100 mm, Rösler Shot blasting machine RRB 11/5, we used this machine only like backup. That are the reason why is working time very low and machine are completely correct. Kdjdet N Sz Ajpfx Akpou

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Tool grinding machine EWAG WS 11 INCLUDED EQUIPMENT: x1 infeed Z-axis : Infeed operation, metric 4 C x1 Cross feed X-axis 4 Q-M x1 grinding stroke 3H : operation of the grinding stroke either by lever or by hand wheel - ref : 111-2-15167 (WS11) x1 grinding spindle Q 36-12, complete 9 JKP x1 workhead spindle with W25 collet reception Ksdpfx Akjz I Tbxspedu x1 foot switch 9 M - operation of infeed Z-axis by foot peadal. Infeed stroke steplessly adjustable x1 ISOMA microscope - optic from the front x1 measuring table for microscope x1 ISOMA microscope - optic from the top x1 SIEGFRIED STTV acoustic touch control (grinding wheel to workpiece) in is case x7 grinding wheel flanges Various CBN grinding wheels Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.

Condition: used, Year of construction: 2012, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2012 Control : Heidenhain iTNC 530 Speed : 18000 rpm Movement X/Y/Z : 3600/1100/900 mm Tool holder : HSK 63 In General: Year of manufacture:2012 Control system:Heidenhain iTNC 530 Travel range X/Y/Z:3,600/1,100/900 mm Speed:18,000 rpm Tool holder:HSK 63 Kodpfxjz S S Elj Akpsdu Spindle: Technology:Motorised spindle Speed:18,000 rpm Max. power:35 kW Max. torque:130 Nm Tool holder:HSK 63 NC swivel head: B-axis:+/- 100° Resolution:0.001° NC rotary table: C-axis:360° Resolution:0.001° Clamping surface:1,050 mm Max. table load:1,200 kg Fixed table: Clamping area:4,200 x 1,100 mm Max. table load:1,200 kg/m Tool magazin: Technology:Chain magazine Number of stations:60 Tool changer:Double gripper Max. tool length:300 mm Max. tool diameter:80 (130) mm Equipment: Positioning sensors:Direct scales X-Axis:Direct drive Chip removal:Chip conveyor Coolant supply:Internal cooling system, 40 bar Tool measurement:LASER Workpiece measurement:Touch probe Set-up:Electronic handwheel

Condition: used, mileage: 712,819 km, power: 309 kW (420.12 HP), first registration: 08/2008, fuel type: diesel, empty load weight: 9,175 kg, overall weight: 18,000 kg, axle configuration: 2 axles, color: brown, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, trailer coupling, Manufacturer: Scania - Type/Model: P420 - Outer shell: GRP (stainless steel inside) - 4 compartments (1956/1176/3000/3060) = 9,186 l tank capacity - Tank body: GRP INSULATED - First registration: 28/08/2008 - Mileage: 712,819 km - Number of axles: 2 - Emission class: Euro 5 - Cab: M - Transmission: manual gearbox - Suspension: leaf/air - Brakes: disc - Length: 8,010 mm - Width: 2,550 mm - Height: 3,030 mm - Unladen weight: 9,175 kg - Tank material: stainless steel - Total tank capacity: 9,186 l - Tank compartments: 4 - Insulated - System description: with outlets only Kedpfx Asxtuikokpedu

Condition: used, Używany mieszalnik planetarny produkcji Grieser (DE) model VPL 350. Mieszalnik posiada dwa mieszadła spiralne i jedno obcierające ściany boczne. Mieszadła są napędzane silnikiem el. 15 kW, 1460 obr/min, 400 V, 50 Hz, przez przełożenia pasowe i przekładnię planetarną. Unoszenie i opuszczanie mieszadeł hydrauliczne. Mieszalnik jest wyposażony w 9 przejezdnych kadzi ze stali ko. Każda kadź ma wewnętrzne wymiary 695 mm x 500 mm głębokości, całkowita pojemność 365 l, robocza ok 350 l. Dwie z kadzi mają w dennicy otwory spustowe wyposażone w zawory otwierane ręcznie. W zestawie znajduje się również mechaniczna wywrotnica do unoszenia i rozładunku kadzi przez przechył. Mieszalnik posiada lokalny panel sterowania i szafkę elektryczną. Dokumentacja techniczna - ogólny podręcznik użytkownika i schematy el, w formie cyfrowej. Maszyna obecnie zdemontowana. Ostatnio pracowała w przemyśle spożywczym. Specifications: Kedpfxsyma E Eo Akpsdu Power: 15 kW

Condition: used, Year of construction: 2004, Cut capacity 3300mm length x 2050mm vertical or 1960mm horizontal 300mm max blade dia 80mm max depth of cut 3kw motor Unbraked rolllers for panel handling Precision guide rails for saw unit Saw beam locking TRK front and rear extraction Overall floor area [ freestanding on legs ] 4451mm long x 2859mm high x 1598mm wide. Kdedpfx Akjz Hzgmepeu Serial nr - 35111 Year - 2004 CE [purchased refurbished 2021]

Year of construction: 2011, operating hours: 400 h, condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 9,000 mm/min, i=61 used, good condition, complete with top block and bottom block, without electrics, DMF, without chassis, for mounting on EZ or as foot hoist Kedpfx Aorbznnskpodu Engine ZBR132 C4

Condition: used, functionality: fully functional, Nitto punching tool with crane. Ksdpfx Akez Szg Sspsdu

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: DMF 360-11 Year of construction: 2020 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: d 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 Tool holder: HSK-A 63 Feeds: Rapid traverse (x/y/z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swivel milling head (B-axis) - Integrated rotary table, arranged on the left, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter, 600 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rotary coupling for spindle - Flushing gun for chip flushing - 2x oil and emulsion mist separators - Blow-off air through the spindle center - Infrared measuring probe, Heidenhain TS 460 (if available) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann dividing head RW-NC 300 (dividing head not included) - Alternating operation - Tool breakage monitoring TRS2 - Tracy surface interpolation Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is stated in the additional information. Kdedpfxez A Ap Ij Akpju Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1996, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,450 mm, table load: 6,486 kg, spindle diameter: 110 mm, table length: 1,600 mm, table width: 1,400 mm, feed length W-axis: 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 3,000 rpm, type of input current: three-phase, Kuraki Heavy Duty CNC Horizontal Borer Model: KBT 11 WDX - A Control: Fanuc Series 15M Year: 1996 Table Area: 1400 x 1600mm Table Indexing: 0.001 Degrees (B Axis Rotary) Table Load 6486 KGS Kdedpfx Akoz S Nl Nepsu X Axis Travel: 2000mm Y Axis Travel: 1500mm Z Axis Travel: 1450mm W Axis Travel: 500mm (Spindle) Spindle Diameter: 110mm Spindle Taper: BT50 Spindle Speeds: 5-3000 RPM (Variable) 40 Station Tool Changer Swarf Conveyor Motor: 18-22 KW

Condition: used, Year of construction: 2019, Used straight-line glass edging machine, NEPTUN, Model Rock 11, Year 2019. Kedpfx Ajz H I E Nskpodu

Condition: new, power: 84 kW (114.21 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,660 mm, fuel: diesel, color: other, gearing type: automatic, emission class: euro6, Equipment: ABS, central locking, cruise control, electric window regulation, tail-lift, = Additional Options and Accessories = Kdodpfx Aeyzifrjkpju - Speed limiter - Rearview camera - AC power = Additional Information = Brakes: Disc brakes Front axle: Steered; Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle: Tire tread depth left: 100%; Tire tread depth right: 100% Damage: None