Used Gough&Co. Vibration Siev for sale (29,120)

Condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,43 t dimensions L x W x H: 1,1 x 0,8 x 1,7 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm Bdsdeu Tr T Eepfx Akasb attachment feeding screen Ø 580mm grain size 2mm Additional Separator attachment 5.5mm; 4.0mm and 3.5mm sieve inserts are optionally available for 150.00 Euro per sieve. *

Year of construction: 1990, condition: used, Technical details: voltage: 380 V / Hz weight: ca. 0,1 t dimensions L x W x H: 0,75 x 0,80 x 1,8 m Stationary welded steel construction Type 80 mm steel profile Application: Separation of mineral materials (sand) according to grain size operation by vibration 3x attachments Ø 610mm 1x separation pipe Ø 100mm attachment feeding screen Ø 580mm grain size 4mm Bodou Tr Trepfx Akaedb Additional sieve inserts 5mm and 3mm are optionally available for 150.00 Euro per sieve. *

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Bdjdpox Sxg Hofx Akasb

Condition: good (used), Year of construction: 2000, Stable free-standing screen for wood chips and sawdust. 3 fractions. Perforations of 45 and 6 mm. Screening area approx. 7.3 sqm. Capacity: 80 - 120 m³/h. Robust eccentric system at top and bottom. Drive: 5.5 kW. Dismantled and loaded onto truck free of charge. Bjdpfox Sxgysx Akasdb

Year of construction: 2009, condition: used, Year : 2009 Type: Vibrating sieve Material : stainless steel Engine reference: Elettromeccanica Tarcisio Pugni PVF-F 200 Motor power: 1.1 kW / 1500 rpm Nominal sieve diameter: 900 mm Système de décolmatage : billes Machine dimensions: 110 x 130 x 120 cm Plan for replacement of the grid: this item may be subject to a separate quotation. Bjdpoykb U Nsfx Akaodb  

Condition: used, Manufacturer: ChauvinType: vibrating sieveNumber of separation stages: 1Screen diameter: Ø 650 mmMaterials in contact with the product: stainless steelScreens available (3 mm and 0.315 mm)Power supply: three-phase (240 or 400)Weight: 100 kg Bodpfxeygnhbj Akaodb

Year of construction: 2026, condition: new, 1200mm diameter vibrating screen Bdodpfx Aeym Rinjkaeb Two screening decks Made of SS304 stainless steel 0.5mm and 0.25mm mesh Mesh cleaning ball system 2.2kW 380V 50Hz three-phase motor

Year of construction: 2024, condition: new, Vibrating screen with a diameter of 1200mm. Two decks screening the material. mesh size to choose from. the sieve can run dry or wet. making the screen of carbon steel or stainless steel. 1.1kw engine 380V 50hz Good quality screening machine at a reasonable price, Bdodpfx Aohgv T Uokajb my sieves are already successfully working in several European countries and customers are very happy !!! available immediately. PayPal payment available!!! Welcome

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Bdedoxpyinepfx Akaob Vibrating Screen Technical Specifications Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-1240 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,200 x 4,000 mm Production Capacity: 70 – 95 t/h Motor Power: 7.5 / 11 kW Bdsdpfxsxpvq Uo Akasb Weight: 7,400 – 8,000 kg Model: CVS-1640 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 4,000 mm Production Capacity: 100 – 130 t/h Motor Power: 11 / 15 kW Weight: 13,500 – 14,750 kg Model: CVS-1650 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 5,000 mm Production Capacity: 130 – 160 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 14,000 – 15,500 kg Model: CVS-1850 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,800 x 5,000 mm Production Capacity: 140 – 180 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 16,000 – 17,500 kg Model: CVS-2050 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 5,000 mm Production Capacity: 170 – 220 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 16,500 – 18,200 kg Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Model: CVS-2470 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,400 x 7,000 mm Production Capacity: 268.8 – 336 t/h Motor Power: 2x15 / 2x18.5 / 2x22 kW Weight: 20,500 – 24,000 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), overall weight: 11,000 kg, Year of construction: 2026, operating hours: 10 h, 6203 20X6 3 Deck Horizontal Screen triple shaft oval stroke vibrator made in Swiss Rosta suspension Listing Type New Bedpoyhyvdjfx Akasdb Weight 10 tons Operating speed range 675-875 rpm New 30 kW electric drive package with v-belt drive HUCK Bolt and Timken bearing following model also available 5163 6203 8204 10 feet width 12 feet width 16 feet width

Year of construction: 2026, condition: used, General information New: Yes Colour: Grey Reference number: 5 Weights Empty weight: 650 kg Functional CE mark: yes Bodpfoyya Hdsx Akaodb Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,8x0,6 Production country: KR Additional information Please contact Ö. Inalkac for more information We offer you new excavator mounted Vibration Compactor Plates. We have 4 different models. ACP15 excavator mounted compactor which is 600kg and fits on excavator 8-17ton. Contact us for details. We have compactors in stock from 220kg to 930kg. PLAQUES VIBRANTES, VERDICHTERPLATTEN, PLACAS VIBRATORIAS, PIASTRE VIBRANTI, VIBRATING PLATE COMPACTORS, FARFURII COMPRESOR, TRILBLOK, ЦОМПРЕССОР ПЛОЧЕ, KOMPRESOR PLOČE, KOMPRESSORPLATTOR, COMPRESSOR PLATER, COMPRESSORE PLATES, КОМПРЕСОРИ ТАБЕЛИ, KOMPRESSZOR PLATES, PLACAS COMPRESSOR

Year of construction: 2023, condition: used, General information New: Yes Reference number: 2 Weights Empty weight: 930 kg Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Delivery terms: EXW Latest inspection: new Production country: KR Additional information Bodpsq Ixtfjfx Akaodb Please contact Ö. Inalkac for more information AJCE ACP-20 Vibration Plate Compactor for excavators. ACP20 is 920kg and fits on 16-26ton excavator. We have also Compactors for 5, 10, 15, 20, 30 ton excavators. Contact us for details. Verdichter, Compacteur, Puristin, Kompaktor, compactador, Zagęszczarka, Þjöppur, Komprimator, Цомпацтор, Συμπιεστής, Compattatore

Year of construction: 2019, condition: excellent (used), Russell Finex 17240 Vibratory sieve Bdsdpfjyw Trbjx Akaeb 2019, Stainless compact vibratory sieve, 500mm mesh diameter, mobile, 3Ph

Condition: good (used), Gough Engineering GV1 Vibratory sieve Bdodpfsyw Tbcsx Akajb Stainless, 450mm mesh diameter, mobile, 3Ph

Condition: good (used), Russell Finex 17300 Vibratory sieve Stainless, 500mm diameter mesh, mobile, 3Ph Bdodpfx Ajyw Tafokaob

Year of construction: 2023, condition: excellent (used), Weighing and Bagging System Year: 2023 Comprising of: - 1 x Incline Conveyor, approx. 5m height Gantry 1 x 14 Head Multihead Weigher, dimple pan 1 x Vertical Form, fill and seal bagger, Model: X500 (was packing 180g bags of Mangetaut) Bdjdpfx Akjy Exfvjaeb 1 x Checkweigher *Lots of videos available*

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: Bdodpfou Tha Iox Akaob The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Bedpfx Aeu Thh Eokaedb Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram Bdjdpfsx A U Ncsx Akaeb • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site Bedpfx Akeng Exasaodb - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Bsdpfxjndn Age Akajdb Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. Bodpfjnh R Ekox Akasdb TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: Bodpfx Akjnfvx Noasdb - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping Bjdpfx Aondk N Ajkaedb - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site