Used Geocean Dvs 250 for sale (10,413)

Year of construction: 2013, condition: like new (used), functionality: fully functional, Equipment: CE marking, Canopy-enclosed and soundproofed generator set, less than 3,000 operating hours, skid-mounted chassis, Volvo engine. Hedpfx Aozvq Riec Tst

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Hedszu Nyajpfx Ac Tot Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SN319009701, functionality: fully functional, immediately available, very good condition, 12 months warranty With safety system for solvent-containing substances according to DIN 1539 -Internal dimensions w x d x h 1000 x 1000 x 1500 mm -External dimensions w x d x h 1765 x 1425 x 2615 mm -Capacity 1500 liters -Tmax 250°C -Controller JUMO Imago 500 -Approved amount of solvent at Tmax 250 g: 46 g -Exhaust air flow rate: 6 m³/min Hsdpfx Aezivl Ejc Tet -Optional equipment: 1 feed-through, e.g. for thermocouples Entry markings -Matching charging carts and trays available on request! -Connected load 26 kW -Net weight 1250 kg -Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse is possible by appointment. We offer new and used industrial ovens. Please contact us! Oven, industrial oven, drying oven, firing oven, heating oven, heating cabinet, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, curing oven, convection drying cabinet, solvent oven, chamber dryer, paint drying oven.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009702, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances in accordance with DIN 1539! 3 heavy-duty pull-out shelves included, each with a load capacity of 123 kg, full extension! - Internal dimensions (w x d x h): 1000 x 1000 x 1500 mm - External dimensions (w x d x h): 1765 x 1425 x 2615 mm - Volume: 1500 liters - Tmax: 250°C - Controller: JUMO Imago 500 Hodpfx Aozivl Ssc Tst - Approved amount of solvent at Tmax: 250 g / 46 g - Exhaust air volume flow: 6 m³/min - Additional equipment: 3 pull-out grid shelves, each with a load capacity of 123 kg 1 pull-out chip tray at the bottom, included Pass-through for e.g. thermocouples - Connection power: 26 kW - Weight: 1250 kg - Includes documentation, CE declaration We would be happy to offer installation and commissioning services. Inspection is possible in our warehouse by appointment. We offer new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 319009703, functionality: fully functional, available for short-term delivery, 12 months warranty Equipped with a safety system for solvent-containing substances according to DIN 1539! 3 heavy-duty pull-out shelves, each with a load capacity of 123 kg, full extension! -Internal dimensions w x d x h: 1000 x 1000 x 1500 mm -External dimensions w x d x h: 1765 x 1425 x 2615 mm -Volume: 1500 liters -Tmax 250°C -Controller: JUMO Imago 500 -Approved solvent quantity at Tmax 250°C: 46 g -Exhaust air volume flow: 6 m³/min -Additional equipment: 3 pull-out grid shelves, heavy-duty, each with a maximum load capacity of 123 kg 1 pull-out chip tray at the bottom, included 1 feedthrough, e.g., for thermocouples -Connection power: 26 kW -Net weight: 1250 kg -Includes documentation, CE declaration Hodpfx Aezivlrsc Tst We would be happy to offer installation and commissioning services. Inspection can be arranged at our warehouse. We carry new and used industrial ovens. Please contact us! Oven, ovens, drying oven, firing oven, heating oven, heating cabinet, industrial oven, convection oven, convection chamber dryer, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, sintering oven, convection drying cabinet, convection oven, solvent oven, chamber dryer, paint drying oven

Condition: like new (used), Year of construction: 1991, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 250 t, table width: 760 mm, table length: 2,700 mm, overall weight: 35,000 kg, punching force: 250 t, Equipment: documentation/manual, safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener. Hedpsu Dxb Tjfx Ac Tjt

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 Hodpfx Acozp T Tae Tet ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Power output: 250 kVA

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Hedpozwm Akefx Ac Tst Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, input voltage: 380 V, coolant pump power: 100 W, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Hsdpotwdviefx Ac Tet Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: used, DVS UGRIND 800 is a CNC external and internal grinder, engineered for precision, high accuracy and reliability. Handles workpieces Ø 130–500 mm; Z axis 1200 mm, X axis 250 mm. Grinding spindle 25 kW; workpiece spindle motor 24 kW; speeds 0–500 t/min stepless; supply 50 Hz 3x 400 V; weight ~7000 kg; L2850×W2490×H2290 mm; operating time 12000 Heures. Accessories: coolant system, coolant filter system, measuring feeler gauge, set of flanges for internal grinding, set of flanges, lamp, tool cabinet, electronic handwheel. Capable of achieving tight tolerances; typical applications: automotive, machine tools, aerospace, medical, watchmaking. Hjdpfxsyxnuaj Ac Tst

Condition: excellent (used), CATALOG NUMBER 7212 TECHNICAL DATA - Track width: 250mm - Shaft width: 400mm - Shaft diameter: 80mm - Maximum blade diameter: 400mm - Blade bore diameter: 80mm - Maximum cutting height: 140mm - Table width with clearance: 730mm - Table length: 2130mm From the top: - Pawls - Pressure shaft, slip type - Pawls - Pressure shaft, smooth - Saw shaft - Smooth pressure shaft, 4 pcs From the bottom: - Smooth slip shaft - Pawls - Track Infeed table + guide rail: - Roller width: 460mm - Feeder dimensions (L/W): 1660x630mm - Overall dimensions (L/W/H): 2010x630x900mm Outfeed table: - Feed rollers: 8 pcs - Roller width: 800mm - Overall dimensions (L/W/H): 4400x980x880mm - Centralized lubrication - Electric body raising/lowering: 0.55kW - Electric adjustment of saw shaft: 0.55kW - Stepless feed speed adjustment: 1–39m/min - Feed motor: 1.1kW - Main motor: 30kW - Extraction port diameter: 210mm Hodpfozxqv Dox Ac Tst - Overall dimensions of multirip saw (L/W/H): 2520x1870x2000mm + control panel - Total weight: approx. 2500kg ADVANTAGES – German-made – High cutting height – Infeed and outfeed tables – Used multirip saw, very good condition Net price: 89,900 PLN Net price: 21,400 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Hodpfjy St Sksx Ac Tet Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA Track width: 250 mm Shaft width: 250 mm Max saw blade diameter: 350 mm Saw blade bore diameter: 80 mm Max cutting height: 120 mm Table width with gap: 700 mm Table length: 1790 mm *From above: Ratcheting pawls Pressure roller, smooth Ratcheting pawls Pressure roller, smooth Shaft with sawblades Smooth pressure rollers: 2 pcs From below: Guide Smooth sliding roller Ratcheting pawls Track Central lubrication Feed motor: 1.1 kW Main motor: 30 kW Electric body lifting Manual saw shaft lifting Extraction nozzle diameter: 160 mm Hodszwwuqspfx Ac Tet Overall dimensions (L/W/H): 2250x1700x2000 mm Weight approx.: 3000 kg – German-made – Electric lifting of body and saw shaft – Smooth feed speed adjustment – Used multi-blade saw, in very good condition Net price: PLN 68,900 Net price: EUR 16,400 at the rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Hjdpfezww A Iex Ac Tot Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 17.650.001, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, throat depth: 250 mm, working width: 3,100 mm, TECHNICAL DETAILS Hjdpfx Acozxdtco Tst Pressing force: 250 t Max. working width: 3,100 mm Frame spacing: 3,200 mm Overhang: 250 mm Rear gauge depth: 750 mm Max. stroke: 400 mm MACHINE DETAILS Control system: CNC Power: 34 kW Dimensions & Weight Dimensions (L x W x H): 4,850 x 2,390 x 3,340 mm Weight: 20,500 kg Transport packages: 3 pcs. EQUIPMENT Tools Documentation CE marking CE certificate

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Hedpfx Acozmamuj Tjt Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Condition: used, in working order

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376292, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376292 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Hjdpfx Aezw Ucxsc Tet Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total-pressure increase: 2500 daPa Operating-point total-pressure increase: 1862 daPa Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Year of construction: 2020, condition: used, functionality: fully functional, machine/vehicle number: 376295, The Reitz KXE 250-050030-00 is an industrial centrifugal fan designed to generate a high total pressure increase in process installations. The assembly consists of a volute fan casing, an impeller mounted on a separately supported shaft, a coupled electric motor, and a common steel base frame with vibration-isolating mounts. The KXE design is suitable for moving air and process gases in systems requiring high flow rates and pressure. This unit was manufactured in 2020 for a rated volume flow of 500 m³/min and a total pressure increase of 2500 daPa. At its operating point, it delivers 602.4 m³/min at 1862 daPa and 3033 rpm. The shaft is supported by two 6318 bearings lubricated with Shell Gadus S2 V100 2 grease. Manufacturer: Konrad Reitz Ventilatoren GmbH & Co. KG Type: KXE 250-050030-00 Product type: industrial centrifugal fan Serial number: 376295 Year of manufacture: 2020 Material number: 10466442 Measurement category: C Efficiency grade: N61 Target efficiency grade value: 64.5 Rated inlet temperature: 20°C Operating-point inlet temperature: 40°C Rated inlet medium density: 1.205 kg/m³ Operating-point inlet medium density: 0.93 kg/m³ Rated volume flow: 500 m³/min Operating-point volume flow: 602.4 m³/min Rated total pressure increase: 2500 daPa Operating-point total pressure increase: 1862 daPa Hodpfx Aozw Ug Rec Tot Optimum efficiency: 76.3% Rated shaft power: 256.57 kW Operating-point shaft power: 231.1 kW Rated rotational speed: 2980 rpm Operating-point rotational speed: 3033 rpm Maximum rotational speed: 3159 rpm Maximum medium temperature: 80°C Drive-end bearing: 6318 Non-drive-end bearing: 6318 Lubricant: Shell Gadus S2 V100 2 Initial relubrication interval: 2460 operating hours Subsequent relubrication interval: every 2460 operating hours Grease quantity per bearing: 132 g Conformity marking: CE

Condition: excellent (used), Industrial centrifugal pump SPECK-PUMPEN Hilpoltstein for sale, complete with a Bauknecht 15 kW electric motor. Pump specifications: Manufacturer: Speck-Pumpen Hilpoltstein Type: 50/250 REZ Serial number: 68381 Capacity: 40 m³/h Head: 63 m Rotational speed: 2900 rpm Power consumption: 12 kW Industrial design Manufactured in: Western Germany Motor specifications: Manufacturer: Bauknecht Type: 160M Power: 15 kW Voltage: 380 V Current: 29 A Rotational speed: 2935 rpm Frequency: 50 Hz cos φ: 0.90 Protection class: IP44 Insulation class: B Condition: Used pump, in working order. Visible signs of use and storage, including surface corrosion and paint chips. The unit is sold as a complete set: pump and electric motor. Visual condition as shown in the photos. Set weight: approximately 150 kg. Hodpfjzvzvvox Ac Tot Ideal for industrial applications, water, cooling, and circulation systems. The unit can be inspected before purchase.

Condition: used, Year of construction: 2014, The portal-type hydraulic press is designed for bending or straightening, as well as for processing finished welded components, and for disassembling mining machinery and other equipment. It is used in mechanical, production, and repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of manufacture: 2014 Technical specifications: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of gate cylinder 1: 2 x 300 mm Diameter of gate cylinder 2: 2 x 250 mm Force of gate cylinders 1: 2 x 1768 kN Force of gate cylinders 2: 2 x 1228 kN Maximum clearance: 1240 mm Hodpehktq Aofx Ac Tst Stroke of working cylinders: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - four working cylinders - gate movement cylinder - working cylinder movement cylinder - power unit with T-100/30 pump (year 2006, overhauled in 2011) Technical condition: used, requires inspection.

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Hedpozi R R Njfx Ac Tst Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 75 kW (101.97 HP), COMPLETE WASTE WOOD DISPOSAL LINE RUDNICK & ENNERS – Year of manufacture 2011 For sale is a complete waste wood disposal plant by Rudnick & Enners, built in 2011. The line consists of 20 components and was used for the automatic removal, sorting, and processing of edgings, wood chips, and residual wood in a sawmill. The system has a modular design, is dismantled, in very good condition, and available immediately. Technical Overview – Positions 1 to 20 01 – Crooked chain conveyor from reducer, W 600 mm 02 – Vibrating chute 1-edging line, L 13.0 m, W 650 mm 03 – Vibrating chute 2-edging line, L 15.0 m, W 650 mm 04 – Vibrating chute frame saw line, L 8.50 m, W 500 mm 05 – Vibrating chute 1-frame saw line, L 10.0 m, W 500 mm 06 – Vibrating chute 2-frame saw line, L 9.0 m, W 500 mm 07 – Vibrating chute frame saw roller conveyor, L 7.50 m, W 500 mm 08 – Vibrating chute trimming line, L 11.0 m, W 650 mm 09 – Vibrating chute trimming line, L 9.0 m, W 650 mm 10 – Screw conveyor for sawdust, L 4.0 m, Dia. 300 mm 11 – Conveyor belt to chipper, L 3.60 m, W 500 mm 12 – Slab conveyor belt, L 11.0 m, W 300 mm 13 – Waste conveyor belt, L 11.60 m, W 300 mm 14 – Metal detector 15 – Chipper type RE-TH 250/700/5, Motor 75 kW 16 – Double screw under chipper, W 600 mm 17 – Crooked chain conveyor to screen, W 600 mm 18 – R&E screen, L 4.0 m, W 2.0 m 19 – Crooked chain conveyor to landfill, W 500 mm / W 300 mm 20 – Crooked chain conveyor to wood chip storage, W 600 mm Additional Information Manufacturer: Rudnick & Enners Year of manufacture: 2011 Condition: very good, used and dismantled Availability: immediately ex stock Location: A-3525 Lugendorf, Austria Application: Sawmills, biomass plants, wood processing Hjdpfozxk S Ejx Ac Tet

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! Hodpfx Acszbnl As Tet -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< Hedpezu Ryhjfx Ac Tjt • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: good (used), Year of construction: 2003, functionality: fully functional, Internal article number: 26081 Metal circular saw BIMAX TA 91-250 Year of manufacture: 2003 + Roller conveyor 2550mm Hodpfjzxgvaox Ac Tot + Coolant pump + Various saw blades + Operating manual / Electrical wiring diagram Control: Siemens Simatic OP7 Dimensions (L x W x H): 130 x 110 x 195cm Weight: approx. 1000 kg Dimensions of roller conveyor: 260 x 70 x 105cm The machine is fully functional and can be inspected while powered on, by arrangement, in our heated warehouse covering an area of over 500 m².