Used Günther Maschinenbau Splitter X2 for sale (5,926)

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, overall weight: 32,000 kg, Year of construction: 2021, operating hours: 1,477 h, machine/vehicle number: SP7097, Drive system: Diesel-electric drive (80 kVA) Bjdpfxjz H N N Ao Aa Iodh Throughput capacity: up to 200 t/h Metering hopper: 5 m³ Screen deck: Splitter Twin Wave (2 x 11 kW) Oversize material conveyor: discharge height up to 4,200 mm Undersize material conveyor: discharge height Transport dimensions: 12,100 x 3,000 x 3,500 mm (L x W x H)

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components. Bdjdpfx Asy N Rlvsa Ijh

Year of construction: 2014, condition: used, No. 10018 Mobile 2-fraction spiral shaft screen GÜNTHER / Doppstadt SPLITTER F2 Used, year of construction 2014 Approx. 3000 operating hours Incl. mobile deck 0/120 Screening of materials that are difficult to screen, such as commercial waste, bulky waste, mixed construction waste, scrap metal, slag, waste wood, organic waste, landfill deconstruction in 2 fractions - Drive: Generator type 50 kVA / voltage 400/230 V / frequency 50 Hz / speed 1500 rpm / fuel tank capacity 250 liters / diesel fuel - Feed hopper: length 2700 mm / width 2100 mm / loading volume 3 m³ - SPLITTER screen deck / spiral shaft deck AA 254: Length 6000 mm / width 2500 mm / drive 3 x 4.0 kW controlled via frequency converter / 180 mm pitch / separating cut 0-80/120 mm Bdedewhza Uepfx Aa Ioh - Feeder belt FH: Length 3000 mm / Width 1200 mm / Drive 1 x 4.0 kW controlled via frequency inverter / Folded design, incl. hopper for receiving the discharge belt on the shredder / Chevron belt quality - Bottom grain collecting belt, longitudinal FC: Length 5600 mm / Width 1200 mm / Drive 1 x 3.0 kW / Permanent magnetic separation / Chevron 16 mm belt quality - Bottom grain collecting belt crosswise FC: length 1600 mm / width 1000 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile undersize discharge conveyor: length 4460 mm / width 1000 mm / drive 1 x 4.0 kW / can be extended by FE fraction / belt quality Chevron 16 mm - Oversize grain collecting belt FC: length 5300 mm / width 1200 mm / drive 1 x 3.0 kW / belt quality Chevron 16 mm - Mobile oversize grain discharge conveyor: length 7350 mm / width 1700 mm / drive 1 x 5.5 kW / can be extended by FE fraction / discharge height 5000 mm - Control cabinet: Complete electrical control via a PLC in a central control cabinet (protection class IP55) / Control and visualization via Siemens S7 colour touch panel / Radio remote control with colour display for all travel and work functions - Mobility: Electric crawler/tracked chassis with rubber pads / Electro-hydraulic control of moving parts - Power generator: 50 kVA, water-cooled 4-cylinder diesel engine - Throughput: up to 60 t/h (depending on material) Transport dimensions approx. 13600 x 3000 x 3100 mm LWH Weight approx. 21000 kg Sold on behalf of the customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Errors in the description and price reserved Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, GÜNTHER GTP 600 MC2 | Combined roller steak tenderizer and meat press (strip tenderizer) Bdsdpfxezu Axce Aa Ioh Manufacturer: Günther Maschinenbau GmbH Model / Type: GTP 600 MC2 Serial number: 34477 Year of manufacture: 2015 Power supply: 400 V / 50 Hz / 16 A Power: 4.5 kW Overall dimensions: 2250 x 2050 x 2050 mm Working width: 570 mm Belt width: 595 mm (plastic) Pneumatic parameters: working pressure 6 bar, air consumption 100 l/min The GÜNTHER GTP 600 MC2 is an advanced, industrial machine that combines the functions of a roller steak tenderizer and a pneumatic meat press in a single processing step. The machine is designed for professional meat processing plants, butcher shops, and production lines for cooked and cured meat products. Combining surface scoring with mechanical pressure significantly increases the active surface area for brine absorption, improves protein release, and ensures excellent binding and consistency of the product after heat treatment. The unit is factory-equipped for operation in continuous processing lines, including directly after automatic brine injection machines. The scoring rollers and pneumatically controlled pressing roller automatically adjust their clearance to the thickness of the meat piece being processed (pork, beef, or poultry). This ensures a repeatable processing cycle without damaging the fiber structure, which translates into higher slicing efficiency and an aesthetically pleasing appearance of the finished product’s cross-section.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a Günther injector for meat, fish, and cheese, type PIH57M from 2017 – a compact, automatic machine for injecting brine and marinade with a capacity of 30 l/min. The device has been designed for the processing of meat, poultry, fish, and cheese, where even distribution of brine, improvement of taste and color, and increased yield of the finished product are important. The PIH series is specially designed for the requirements of poultry and fish injection, with a high needle density for the best possible distribution of brine in the product. Bsdpsyibhqefx Aa Isdh The Günther PIH57M injector operates at 400 V, 1.6 A, 50 Hz, requires 6 bar compressed air and provides a capacity of up to 30 l/min with an installed power of 2 kW. The set includes a brine filter, documentation and spare parts, which facilitates quick implementation of the machine into production and subsequent servicing. Technical data: Manufacturer: Günther Maschinenbau GmbH Type/model: PIH57M Year of manufacture: 2017 Application: injection of meat, poultry, fish, cheese Power supply: 400 V, 50 Hz Current: 1.6 A Operating pressure: 6 bar Capacity: up to 2000 kg/h Number of needles: 57 Needle diameter: 3 mm Maximum product height: 150 mm Working width: 280 mm Power: 2 kW Equipment: filter, documentation, spare parts Machine dimensions: L: 1800 x W: 800 x H: 2500 mm Their outstanding features are: Rugged construction Compact design High injection accuracy Easy operation Easy to maintain High flexibility Easy to clean

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 23.30 E91D-A003, input voltage: 230 V, total length: 125,000 mm, total height: 2,500 mm, total width: 125,000 mm, • Automated sorting and palletizing system with robotics • Robot-assisted sorting, packaging, and palletizing system • Flexible sorting and packaging system with delta and palletizing robots • Automated packaging and palletizing system • Intelligent sorting and palletizing solution with robotic systems Bdsdpfjz Df Aaox Aa Ieh • Fully automatic sorting, packaging, and palletizing system • Robot-assisted packaging and palletizing system • Automated packaging line with delta robots and palletizing robot • Modular sorting and packaging system for packaging • Highly automated sorting, packaging, and palletizing system Automated sorting and palletizing system with robotics For sale is an automated sorting and palletizing system for processing and packaging various products. The system is equipped with two delta robots for product handling and sorting, an industrial palletizing robot, and a case sealer for automatically closing the packages. After sorting, the products are automatically grouped into packages, case sealed, and then palletized. The system is suitable for high throughput rates and can be adapted to different products and packaging concepts. The modular design allows individual stations to be expanded or integrated into existing production lines. Equipment: • 2 × Delta robots for pick-and-place and sorting • 1 × Industrial palletizing robot • Automatic case sealer • Conveyor technology and system control • Suitable for semi-automatic and fully automatic operation The system is in good condition and can be inspected by arrangement. Further technical information, documentation, and images are available upon request.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. Bsdpfx Asz Agv Uoa Isdh - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: Bedpfjz Agw Eex Aa Iodh - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. Bedpfez Ag Rrjx Aa Ijdh - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Bedpfx Aozz Rpcja Iodh Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 48041, table height: 850 mm, table width: 1,200 mm, overall weight: 830 kg, hole diameter: 28 mm, table length: 2,400 mm, Demmeler 3D welding table, Profi Eco Line D28, with accessory cart and extensive original accessories – in new condition. For sale is an original Demmeler 3D welding table, Profi Eco Line System D28, with dimensions of 2400 x 1200 mm. The table was purchased in 2014 and has since been stored in our workshop but has never been used in production. The accessory cart and all accessories were also not used in regular operations. The welding table is in very good, unused condition. In some areas, the original protective film is still in place. Due to long-term storage, minimal surface rust has formed on some edges. However, this does not affect the functionality or the working surfaces. The original invoice (company data blacked out) and a price comparison from 2014/2026 showing a price increase of approximately 31.5% can be viewed upon request. Bjdpfx Aozwac Rea Ijdh The scope of delivery includes: Demmeler 3D welding table, Profi Eco Line D28 Original Demmeler accessory cart Extensive original Demmeler accessories (stops, angles, clamping and positioning elements, etc.) as per the inventory list Sale ex works (EXW Munich). Loading and transport are the responsibility of the buyer. Sale exclusively to business customers. Inspection and testing before purchase are expressly desired. Sale is made without any warranty, guarantee, or right of return.

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Bdodpfxozr Irce Aa Ish Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Bdjdpfx Aey Uwr Tsa Ijh Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 2 h, functionality: fully functional, Exhibition machine, 2 units available, used. Unfortunately, it is too large and too heavy. Bjdpfxszuv Dlj Aa Iedh

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Bdsdpfxjznmgqj Aa Ieh Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, load capacity: 800 kg, - Stationary scissor lift table with single scissors - Steel perforated grid plate System 16 - Platform size: 2000x1000x100 mm - Hole spacing: 50 mm - Hole diameter: 16 mm - 360-degree rotary platform beneath the grid plate - Grid system with 4 stops every 90 degrees - Lift up/down operated by a hand control with 3 m cable - Battery-hydraulic drive - Load capacity: 700 kg - Construction height: 670 +/- 60 mm Bsdpjxazzysfx Aa Iedh - Useful lift: 700 mm - Maximum height: 1370 +/- 60 mm - Own weight: approx. 810 kg - Stationary version with 4 base plates.

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 Bedozr N Huepfx Aa Isdh If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, total width: 12,500 mm, total length: 11,500 mm, total height: 8,600 mm, power: 831 kW (1,129.84 HP), Equipment: documentation/manual, For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding machine, manufactured in 2019. The machine is in very good technical condition, fully functional, and immediately available. An inspection while the machine is running can be arranged by appointment. The machine is designed for the economical production of large-volume HDPE hollow bodies and sophisticated technical blow-molded parts. It is a batch-type 3-layer extrusion blow molding machine with a parison accumulator head. The offered scope of supply includes: - Piovan GMS-160 high-performance plastic granulator, manufactured in 2023 - Piovan VM 500 extraction system - GWK/Technotrans cooling unit The listed peripheral components are included in the offer price. If individual components or the entire range of accessories are not required, they can be removed from the scope of supply, and this will be taken into account when determining the price. Technical key data: Manufacturer/Model: BBM 2500 Year of manufacture: 2019 Process: CoEx3 extrusion blow molding with parison accumulator head Material: HDPE Design: 1 station with 1 CoEx3 blow head 3 extruders: 1 × 130 mm and 2 × 70 mm Total output: up to 1,200 kg/h Accumulator volume: 1 × 20 l and 2 × 7.5 l Electrical wall thickness control Clamping force: 2,500 kN Platen area: 2,160 × 2,400 mm Column spacing: 1,500 × 2,400 mm Opening width: 600–1,500 mm Electrical closing movement Locking via 6 hydraulic power strokes 2 integrated KUKA 6-axis robots for removal and handling Fully automatic KOCH material feeding system with gravimetric dosing and mixing Bjdpfx Aaozw D Has Iedh Beckhoff TwinCAT control with Siemens components and drives Connected power: 831 kW Power supply: 400 V, 3 phases/N/PE, 50 Hz Dimensions: approx. 11,500 × 12,500 × 8,600 mm (L × W × H) CE documentation and machine manuals available The machine is particularly suitable for large-volume hollow bodies, technical molded parts, infrastructure products, sanitary parts and industrial containers. Availability: immediate Inspection and trial run: possible by prior appointment

Condition: used, Year of construction: 2018, functionality: fully functional, number of straightening rollers: 6, conveyor belt width: 1,300 mm, sheet thickness steel (max.): 1 mm, coil width: 1,250 mm, cutting length (max.): 6,400 mm, straightening roller diameter: 70 mm, space requirement width: 3,500 mm, space requirement length: 18,275 mm, space requirement height: 4,000 mm, Single-person operation, rapid access to a wide variety of sheets, automatic sheet changeover, standard sheets remain loaded in the system; the upper sheets are less common types; secure solution with a movable access aid for loading the upper decoilers; programmable slitting line with 8 pairs of knives in station version; slitting knives are alternately arranged for distortion-free cutting; rotary knives of the AL p with 100 mm diameter to achieve minimal incision; 7.2 m long conveyor belt for discharging the strips. The system layout PDF is shown as a mirror image! Bdodjxwc E Ispfx Aa Ijh

Condition: good (used), Year of construction: 2003, machine/vehicle number: 371, total length: 2,200 mm, total width: 1,250 mm, total height: 2,150 mm, input voltage: 400 V, power: 10 kW (13.60 HP), input frequency: 50 Hz, 1 x Weber high-speed slicer suitable for the industrial slicing of various products such as meats, sausage and cheese. Manufacturer - Weber Maschinenbau. Model - CCS-602. Serial number – 371. Date of manufacture - 2003. Bsdpfx Aaszvx Dks Ijdh Knife – 460mm diameter circular knife. Speed / output – up to 600 slices / minute. Maximum product length – 1,200mm long. Product cutting thickness – 0.1mm to 50mm (depending on product). Electrical requirements – 400 V / 50 hz / 3 phase. Power – 10 kW. Air (pneumatic) requirements – 10 bar. Overall dimensions – 2200mm long x 1250mm wide x 2150mm high.

Condition: excellent (used), Year of construction: 2013, Well-maintained HMF 2420-K3 loading crane from 2013, featuring remote control and 6 hydraulic functions. Suitable for mounting on a truck and ideal for construction, transport, recycling, and industrial applications. This powerful HMF loading crane offers excellent lifting performance and is prepared for use with a rotator and grapple. A reliable and versatile crane, ready for immediate professional use. Specifications: HMF 2420-K3 Year of manufacture: 2013 Bdodjz Hpauopfx Aa Ish 6 functions (can be used with a rotator and grapple) Remote control Load capacity: 5070 kg at 4.4 m reach 3470 kg at 6.3 m reach 2600 kg at 8.2 m reach 2070 kg at 10.2 m reach About Cevoman ✔ More than 45 years of experience with trucks and commercial vehicles ✔ Technically inspected by our own workshop ✔ Specialist in MAN trucks, loading cranes, and container systems ✔ COP certified ✔ Experience in worldwide export ✔ Personal service and professional advice Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, Year of construction: 2013, Year of manufacture: 2013 240 V, IP 65 Bdodpfx Ajzrglzja Ish Operating pressure: 6-8 bar

Condition: repair required (used), Year of construction: 2003, functionality: fully functional, total length: 7,000 mm, number of previous owners: 1, The stepped slide is fully functional and was in operation until the plant was converted. The system is being sold as in need of overhaul. There is wear and tear on the mechanical guides and drive elements, consistent with its age. Welding and maintenance work are recommended for its long-term reuse. It is ideal as a cost-effective project for refurbishment or as a robust source of spare parts. Bdsdpfx Aaszwpxzo Ioh

Condition: used, Year of construction: 2018, operating hours: 3,000 h, travel distance X-axis: 3,200 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, table length: 3,000 mm, spindle speed (min.): 4,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 10, Equipment: rotational speed infinitely variable, CNC drilling/milling machine No CNC knowledge required, extremely easy to operate Tool holder: Laip Coolant system Automatic tool changer for 10 tools Automatic tool length measurement Bodpfxszqvbpe Aa Iodh Data import: DXF Electronic handwheel Light curtain on the operator side Spindle motor: 7.5 kW Spindle speed: 200-2000 RPM Touchscreen: 21.5" Factory inspected

Year of construction: 2016, condition: repair required (used), functionality: fully functional, Metall Check Bdodpfx Aozh D U Eja Ish