Used Forestry Vehicle for sale (30,501)

Condition: used, Year of construction: 2000, operating hours: 1 h, power: 206 kW (280.08 HP), next inspection (TÜV): 05/2027, Equipment: ABS, air conditioning, cabin, Unique, highly off-road capable LOF M.A.N. Agro special vehicle, single-tire all-wheel drive tipper truck 4x4, type L 90 with Hiab X-HiPro 122 E-3 loading crane with remote control and Meiller 3-way tipper body, Agro tires 445/65 R22.5, hydraulic rear axle steering, PTO drive at the rear, 3-axle differential locks, Euro 3 engine without AdBlue, leaf-sprung suspension, air conditioning, additional second hydrostatic drive, 2 x trailer coupling, second-hand with only 47,000 km. The tipper body and loading crane can be exchanged and removed. LOF tractor unit Long cab with bunk and 2 rear windows PTO drive at the rear Single Agro special tires 445/65 R 22.5 Air conditioning Wheelbase 3,600 mm Total weight 16,500 kg, total weight 18,000 kg possible Unladen weight 10,897 kg Payload 5,603 kg at a total weight of 16,500 kg Payload 7,103 kg at a total weight of 18,000 kg possible Engine Euro 3, D0836 LFL03, 6 cylinders with 280 hp (without AdBlue) All-wheel drive 4 x 4 All-wheel steering on both axles Front and rear axles can be steered individually or together Front-wheel drive can be engaged All-wheel longitudinal lock Differential lock in the front and rear axles Hydrostatic drive for infinitely adjustable speeds between 0-5 km/h Rear axle steerable with electronic/hydraulic steering system for extremely small turning radii Meiller 3-way tipper body (year of manufacture 2023), approx. 3.60 m x 2.30 m x 0.40 m high Remote control for the tipper body Headboard 0.70 m high Bed with lashing points Loading crane Hiab X-HiPro 122E-3 (year of manufacture 2019), foldable behind the cab Crane with 3 hydraulic extensions Lifting capacity at approx. 4.30 m / 2,560 kg // 8.10 m / 1,260 kg // 10.20 m / 980 kg according to the manufacturer Slew and grab control 2-point support with one pivoting support leg Remote control Floor control UVV crane valid until 03/2027 Gearbox ZF 16 S 109 mechanical Gearbox shift locking pneumatic Nlodez H Elmepfx Akijh Transfer gearbox VG1000/2 with off-road reduction Front and rear axles leaf-sprung Stabilizer for front and rear axles Front axle VA9-0950 driven, rear axle AP H9-1380AP Axle ratio i = 5.92 Front springs parabolic 7.5 t, rear springs trapezoid Trailer coupling ring spring with air pressure connections 3 hydraulic connections at the rear for auxiliary hydraulics Permissible total towing weight 30,000 kg ABS Engine brake Cruise control Fuel tank 300 liters, right Sun visor Work spotlights on the cab roof Roof hatch Electric window on the right Driver's comfort seat, air-sprung Co-driver's comfort seat, air-sprung Radio The tipper body and loading crane can be removed/exchange system German vehicle from the second owner Very good and well-maintained condition Service was completely carried out at 45,000 km. Sale exclusively to commercial businesses. Price NET plus 19% VAT. We will gladly provide you with attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2162

Condition: used, Year of construction: 1982, Equipment: cabin, MB-Trac 800 Central gear shift Hydraulics Nlodpfx Akoxrivpoish Forestry equipment was only installed after refurbishment. The vehicle has never worked in the forest!

Condition: used, Year of construction: 2022, operating hours: 359 h, Radio-controlled tool carrier with grass mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier that can also be used on particularly challenging and hard-to-reach terrains with inclines of up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections, ensuring compatibility with a variety of attachments. Features: * 150 m radio control range * Optimal maneuverability * Ground adherence in all directions up to 55° * Special oil sump for secure engine lubrication * Multifunctional application * High performance, fast completion of work * Excellent traction on any surface Optional equipment: * Hydraulic quick couplings "CEJN" * EU DUAL BAND radio control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator protection * Counterweights, approx. 70 kg * 12 Volt LED beacon with bayonet lock Attachment: Energreen Head 130 with hydraulic quick couplers "CEJN" and hammer flails Robust, reliable mulcher made from Strenx® steel, ideal for cutting grass and shrubs up to 3 cm in diameter. Rotor with hammer flails, adjustable cutting height. Technical data: Working width: 1300 mm Oil pressure: 290 bar Number of tools: 22 Oil flow: 52 l/min Hydraulic motor: 21 cm3 Weight: 220 kg We also have other grass mulchers, forestry mulchers, brush cutters, and a stump grinder in stock. Additional attachments such as double-blade mowers, boom mowers, and many other implements are available on request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new machines in stock, as well as additional units for demonstration purposes. Contact us! We also rent out all machines with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible. Nsdpfx Aezviypekielh * Sale price excludes transport. * No liability for printing and typographical errors. * Subject to error, change, and prior sale. * Non-binding offer. * Photos may differ. Price applies to current condition. * All information without guarantee.

Condition: used, Year of construction: 2023, operating hours: 349 h, Radio-Controlled Tool Carrier with Forestry Mulcher The Energreen RoboEVO is a radio-controlled tool carrier capable of operating in particularly challenging and hard-to-access terrain, with slopes of up to 55°. It is equipped with a powerful 40 HP diesel engine and two double-acting hydraulic control valves to ensure compatibility with a range of attachments. Key Features: * Radio control range up to 150 m * Optimal maneuverability Nodpfjy E Dt Eex Akiolh * Traction in all directions on slopes up to 55° * Special oil sump for secure engine lubrication * Multifunctional operation * High productivity with fast completion of tasks * Superior traction on any substrate Special Equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio control with tilt sensor * PANOLIN HLP SYNTH 46 bio-hydraulic oil * Standard color Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 1 LED work light * 12-Volt LED beacon with bayonet fitting Attachment: Forestry Mulcher Forestry Head 130T with hydraulic quick couplers "CEJN", rotor with fixed tools and material guide frame. Robust and reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to 10 cm in diameter. Fixed-tool rotor for shredding cut material. TECHNICAL DATA Cutting width: 1,200 mm Oil pressure: 290 bar Number of tools: 32 Oil flow: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also stock additional grass mulchers, forestry mulchers, brush cutter heads, and a stump grinder. Other attachments such as double-blade mowers, verge mowers, and many other implements available on request! We are pleased to offer suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always keep a selection of new and used equipment in stock, with additional units available for demonstration. Please contact us! All machines are also available for rent with or without operator. Other notes: * Trade-in and purchase of vehicles and machines possible. * Sale price excludes transport. * No liability for printing or typographical errors. * Subject to error, prior sale, and change. * Offer is non-binding. * Photos may differ. Price applies to current condition. * All information provided without guarantee.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, operating hours: 48 h, power: 36.8 kW (50.03 HP), fuel type: diesel, overall weight: 1,220 kg, ENERGREEN RoboFIFTI, forestry mulcher, demonstration machine 2023, only 48 operating hours, 50 hp. For sale is an ENERGREEN RoboFIFTI, manufactured in 2023, in very well-maintained condition. This is a demonstration machine with only 48 operating hours. Equipment and technical highlights: Nlsdpfxez Szlhs Akijh Year of manufacture: 2023, only 48 operating hours, powerful 50 hp diesel engine, emission stage V, radio-controlled tracked carrier. Included in the offer: Forestry mulcher with fixed tools, additional mulching head for lawns and green areas. Current location: North Macedonia.

Condition: used, Year of construction: 2025, operating hours: 12 h, Radio-controlled implement carrier with forestry mulcher The Energreen RoboEVO is a radio-controlled implement carrier designed for operation in particularly challenging and hard-to-access terrain with inclines up to 55°. It is equipped with a powerful 40-hp diesel engine and two double-acting hydraulic controllers, enabling the use of a variety of attachments. Njdsv R E Hfopfx Akiolh * 150 m radio control range * Optimal maneuverability * Traction in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Maximum traction on any surface Special equipment: * Hydraulic quick couplings “CEJN” * Dual band EU radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color: Orange RAL 2011 / Grey RAL 7021 * Rear radiator guard * Counterweights, total 70 kg * 2 LED work lights * LED rotating beacon, 12V, with bayonet mount * Hydraulic winch preparation Attachment: Forestry mulcher Forestry Head 130H with hydraulic quick couplings “CEJN”, rotor with hammer flails and material guide frame Robust, reliable forestry mulcher made of Strenx® steel, ideal for cutting grass, bushes, and reeds up to a diameter of 4 cm. Rotor with flails for shredding chopped material. TECHNICAL DATA Cutting width: 1200 mm Oil pressure: 290 bar Number of tools: 22 Oil flow rate: 55 l/min Hydraulic motor: 23 cm³ Weight: 355 kg We also have other grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double blade mowers, reach mowers, and many other implements available upon request! We are pleased to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of used and new equipment in stock, with additional units available for demonstration. Contact us! All machines are also available for rent, with or without operator. Other notes: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport. * No liability for printing or typographical errors. * Errors, changes, and prior sale reserved. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information supplied without guarantee. Additional information: Engine output: 41 hp (30 kW)

Condition: used, Year of construction: 2025, operating hours: 12 h, power: 36 kW (48.95 HP), Radio-Controlled Tool Carrier with Grass Mulcher The Energreen RoboFIFTI RS is a radio-controlled tool carrier designed for use in particularly challenging and hard-to-reach terrain, with the capability to operate on slopes up to 55°. It is equipped with a powerful 50 HP Perkins diesel engine and two hydraulic quick-coupling connections to enable compatibility with various attachments. Features: * 150 m radio remote control range * Optimal maneuverability * Ground adhesion in all directions up to 55° * Special oil pan for secure engine lubrication * Multifunctional operation * High performance, fast work completion * Excellent traction on all surfaces Special equipment: * Hydraulic quick couplers "CEJN" * EU DUAL BAND radio remote control with tilt sensor * Bio-hydraulic oil PANOLIN HLP SYNTH 46 * Standard color orange RAL 2011 / grey RAL 7021 * Rear radiator guard * Counterweights Comp. 70 kg * 1 LED work light * LED beacon 12 Volt with bayonet fitting Attachment: Energreen Head 155 with hydraulic quick couplers "CEJN" and Y-blades Robust, reliable mulcher made of Strenx® steel, ideal for cutting grass and bushes up to a diameter of 3 cm. Rotor with Y-blades and adjustable cutting height. Technical Specifications: Working width: 1535 mm Oil pressure: 305 bar Number of tools: 30 Oil flow: 55 l/min Hydraulic motor: 21 cm³ Weight: 310 kg We have further grass mulchers, forestry mulchers, brush cutter heads, as well as a stump grinder in stock. Additional attachments such as double-blade mowers, mower arms, and many more are available on request! We are happy to offer you suitable financing, hire purchase, or leasing options. Delivery or shipping by arrangement. We always have a selection of both used and new machines in stock as well as further units available for demonstration. Feel free to contact us! We also offer all equipment for rent, with or without operator. Other information: * Trade-in and purchase of vehicles and machinery possible * Sale price excludes transport * No liability for typographical or printing errors * Subject to errors, changes, and prior sale Nljdsy Ep Hzjpfx Akish * Offer is non-binding * Photos may differ. Price applies to current condition * All information without guarantee Further information Fuel type: Diesel

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. Nledsyltv Ujpfx Akioh We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates Nlsdpfxsyltvbj Akijh - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross Nodjyltvuepfx Akiolh - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Seppi M. BMS 125 forestry mulcher / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €28,290.00 net / €33,665.10 gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator mounting - Ideal for mulching in hard-to-reach areas such as roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches bushes and wood up to 30 cm in diameter - For excavators from 13 to 30 tons - For mounting on various mounting plates - Drive designed for hydraulic motor depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable rear hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids in sandwich construction, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 rotor with fixed tools with inserts made of tungsten carbide - 1 x MONO EXTREME V-LOCK L, part number 19702266 - 33 x MONO TIP V-LOCK, part number 19702259 - 1 x MONO EXTREME V-LOCK R, part number 19702267 - Wear-resistant tool holder - Replaceable rotor stub shafts OPT 465 M-BOOST inclined axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min Nlsdpjznrvqofx Akish 3 hydraulic lines are required: supply, return, and drain. The unit is supplied without hoses, fittings, and mounting plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Njdpfeyltwfex Akijlh With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (by phone at ...). Used EBERT forestry semi-trailer, low-bed type Tvp: TLS 36 ST with VIN: W0985180080D17001. Self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS. First registration: 03/2008, Permissible total weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg. The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5, low-profile tubeless. Tire tread: 1st axle 9-12mm, 2nd axle 7-11mm. Axles: 2 x 10 tons. Axles with S-cam brakes and ABS, hydraulic dual-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drawbar eye. 24V electric generator with HD piston pump, oil tank, and 2 batteries allow remote-controlled functions with wireless operation. Brakes: Two-line brake system according to EC, with spring-loaded brake cylinders acting on the rear axles. With ABS. Lighting according to StVZO. Integrated into a recessed under-run protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth. The hydraulic forced steering is equipped as standard with a wireless remote control, so the driver can "steer" from the cab during tight hairpin turns and when maneuvering. Options included in the price: a. Yellow rotating beacon, rear, pluggable b. with 4 pull-out marker panels (red/white) with an extended width of 2,550 mm when retracted and 2,750 mm or 3,000 mm when extended. c. with electro-hydraulically operated access ramps. Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (Tel. ...) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further Information = Nledpfx Akjz Engkoioh Year of construction: 2008 Unladen weight: 9,000 kg Payload: 27,000 kg GVWR: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Nledjyltv Ispfx Akijh Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device Nlodpfxjymi Naj Akish OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T Njdpfx Ajzdl R Hokijlh ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Year of construction: 2018, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (phone number available upon request). Westtech Woodcracker C250 / Tiltator / Grapple / immediately available / Year of manufacture: 2018 / Top condition! Price: 19,990.00 € net / 23,788.10 € gross - Cutting diameter softwood (mm): 330 - Cutting diameter hardwood (mm): 280 - Grapple opening (mm): 930 - Shear opening (mm): 450 - Self-weight (base – full equipment) (kg): 580-970 - Recommended flow rate (l/min.): 50-100 - Recommended flow rate for auxiliary functions (l/min.): 35-50 - Recommended operating pressure (bar): 280 - Service weight of carrier vehicle * (t): 7-15 Equipment: - incl. Tiltator, infinitely rotatable - incl. Grapple - incl. Autospeed function - incl. Multigrip integrated We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (phone number available upon request) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official DMS sales and service partner. We are an official Weber MT sales and service partner. Nedpfxoznruts Akijlh We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sales excepted! Internal No.: 318367 = Further information = Year of manufacture: 2018 New: No Part suitable for: Application Forestry Please contact Marius Herden for further information.

Condition: used, empty load weight: 2,800 kg, maximum load weight: 9,200 kg, overall weight: 12,000 kg, first registration: 08/1995, total width: 2,550 mm, Equipment: ABS, EBS, electronic stability program (ESP), Key Features Internal Reference: 25494M Chassis Number: 38347 Serial Number: 925.237.450 Vehicle Model: TS12 13800 L / Swiss-Vehicle Vehicle Make: Lanz-Marti Product Category: Tank body Used / New / Demo: Used Date of First Registration: 08/01/1995 Last periodic technical inspection (MFK or TÜV): 05/04/2016 Suspension: Steel-Steel Hydraulic System: None Cab Vehicle Equipment: ABS, EBS, ESP Axles & Tires Axle 1: 295 / 80 R 22.5/8mm, Drum brakes, Leaf spring suspension Nedpfx Akoz Hp Ekoiolh Axle 2: 295 / 80 R 22.5/8mm, Drum brakes, Leaf spring suspension Number of Axles: 2 Weights & Dimensions Gross Vehicle Weight: 12000 Payload: 9200 Unladen Weight: 2800 Vehicle Width: 2550 Body Body Manufacturer: WARTMANN Body Model: Tank trailer Internal Body Dimensions (L x W x H): 13800 L Body Year of Manufacture: 1995 Body Remark: 1-chamber, 13800 liters

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Njdpfx Akszwa Imoielh Further information New: No

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (tel. ). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Nlodpfx Asynrhzskijh Price: 19,160.00 € net / 22,800.40 € gross - Excavators from / to: 12 – 17 t - Weight approx.: 670 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 RPM Advantages of the Holp CutWheel: - Clean cut of all types of wood thanks to an adjustable counter blade - Significantly more economical operation, as less manpower and fewer machines are required, while maintaining a high level of work safety - 3 work steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm) and gathering the cut material - Working at heights of up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 20 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cabin, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lift on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows for pushing the material lying on the ground together as if with a broom - Since the CutWheel does not saw but "squeezes" the wood in both cutting directions, the wood fibers are not torn as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing with saw blades 1 x leak oil We have many more Holp products in our warehouse that are immediately available! Mr. Herden (tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Errors and prior sale excepted! New: Yes Unladen weight: 670 kg Part suitable for: Intended use Forestry Please contact...

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: 14,770.00 € net / 17,576.30 € gross - Excavators from / to: 7 – 11 t - Own weight approx.: 490 kg - Cutting diameter in cutting direction: 3 – 50 mm - Cutting diameter in sawing direction: 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cut of all types of wood due to adjustable counter blade - Significantly more economical operation, as less manpower and machinery are required while maintaining a high level of work safety - 3 working steps in one: cutting (3 mm to 50 mm), sawing (50 mm to 170 mm) and gathering the cut material - Working at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - Cutting wheel operates in two directions and easily processes diameters from 3 mm to 17 cm - High robustness (cutting wheel made of fine-grain steel) - Cutting and sawing direction as well as diameter can be adjusted from the cab, so that the work does not have to be interrupted. This also ensures greater work safety - Significant savings due to the fact that the CutWheel replaces a lifting platform on the excavator – in this way, the CutWheel replaces various machines and even manual labor - The robust construction also allows the material lying on the ground to be pushed together as if with a broom - Since the CutWheel does not saw, but "crushes" the wood in both cutting directions, the wood fibers are not torn open as with a conventional saw blade. This creates a smooth cut, which prevents fungal infestation - Three hydraulic connections are required: Working line, double-acting, for cutting/sawing blades 1 x leak oil line We have many other Holp products in our warehouse that are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Nlodpfx Akoynrhusijh Errors and prior sale are subject to change! New: Yes Empty weight: 490 kg Part suitable for: Application forestry Please contact...

Condition: used, first registration: 05/2011, total width: 2,550 mm, Key Features Nlodpez Hp T Iefx Akieh Internal Reference: 24569N Vehicle Model: Insulated body / Cover / Swiss-Vehicle Vehicle Brand: Peter Product Category: Concrete silo Condition: Used Date of first registration: 05/13/2011 Weights & Dimensions Vehicle width: 2550 Body Body manufacturer: PETER Body model: Insulated body / Cover Internal dimensions of body (l x w x h): 15 m³ Year of body manufacture: 2011

Condition: good (used), Year of construction: 2016, Renault Master 2.3DCI Comilev 100 tf1 Work platform / Truck-mounted aerial platform / Nacelle 10.5 meters working height, 2016. A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always available. Nodps Aa Am Usfx Akijlh Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2023, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Westtech Woodcracker T4000 Telescopic Arm / incl. CS510 crane / in stock & immediately available / Year of manufacture: 2023 Price: €41,990.00 net / €49,968.10 gross Westtech T4000 Telescopic Arm - Working range up to (mm): 6,350 - Telescopic extension (mm): 4,000 - Own weight (kg): 680 – 730 - Lifting moment from excavator kinematics (kNm): 92 - Permitted load capacity (retracted / extended in kg): 2,500 / 1,550 - Maximum pressing force (kg): 100 - Recommended flow rate for telescopic extension (l/min): 50 – 110 - Recommended flow rate auxiliary circuit (l/min): 30 – 40 Nlsdpfeznrvkox Akieh - Recommended operating pressure for telescopic extension (bar): 250 - Service weight of carrier vehicle (t): 14 – 22 Westtech CS510 crane - Cutting diameter (mm): 540 - Gripper opening (mm): 1,270 - Own weight (base - full equipment in kg): 370 – 500 - Recommended flow rate (l/min): 50 - 90 - Recommended operating pressure (bar): 200 – 280 Equipment: - Incl. auto-tilt function for crane - Incl. RTC 10-2 rotator - Incl. pivoting joint with brake - Incl. transport box for CS510 crane Optional: Lehnhoff MS21 adapter plate incl. screws and mounting = €2,400.00 net Many more adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sales excepted! Internal No.: 523028 / 523088 = Further information = Year of manufacture: 2023 New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: used, empty load weight: 8,800 kg, maximum load weight: 27,200 kg, overall weight: 36,000 kg, first registration: 11/2007, total length: 13,600 mm, total width: 2,600 mm, total height: 3,950 mm, operating hours: 7,490 h, Equipment: ABS, cooling unit, electronic stability program (ESP), Key Features Internal Reference: 26387M Chassis Number: WSJ TKS 324 7TJ 051 98 Serial Number: 312.765.160 Vehicle Model: TKS 24 Carrier 1850 / Swiss-Vehicle Vehicle Make: Arcon Product Category: Refrigerated Box Trailer Condition: Used Hours: 7490 Date of First Registration: 11/16/2007 Last Roadworthiness Test (MFK or TÜV): 10/02/2025 Suspension: Air-Air Cab Vehicle Equipment: ABS, ESP Axles & Tires Axle 1: 385 / 55 R 22.5/8mm, Disc brakes, Air suspension Nljdpfx Ajz Hn Hgjkieh Axle 2: 385 / 55 R 22.5/10mm, Disc brakes, Air suspension Axle 3: 385 / 55 R 22.5/10mm, Disc brakes, Air suspension Number of Axles: 3 Weights & Dimensions Gross Vehicle Weight: 36000 Payload: 27200 Unladen Weight: 8800 Vehicle Height: 3950 Vehicle Length: 13600 Vehicle Width: 2600 Body Body Manufacturer: ARCON Body Model: Refrigerated Box Body Year of Manufacture: 2007 Refrigeration Unit Refrigeration Unit Make: Carrier Cooling Capacity (Temperature): 30 Monitoring: Yes Zones: 1-Zone Refrigeration Unit Year: 2007 Refrigeration Unit Features: Double-wing door, Load securing rail