Used Flywheels for sale (171)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2001 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, Soprem powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2001 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control Soprem RMI 50 F1 Powered Auto/Manual Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, Soprem RMI 50 F1 powered automatic/manual decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Lasdpfxoz Irbqo Akweh Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. Soprem RMI 50 F1 Powered Decoiler – 1992 Powered coil decoiler with automatic/manual operation, suitable for supplying strip material to the press for coil-fed production. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring Soprem powered automatic/manual decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, power: 3.2 kW (4.35 HP), input voltage: 380 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 40 t, stroke length: 100 mm, table width: 450 mm, table length: 600 mm, throat depth: 200 mm, ram plate width: 400 mm, ram plate length: 260 mm, clearance between the columns: 260 mm, overall weight: 2,600 kg, Equipment: CE marking, safety light barrier, 2000 Presse Ross 40V-4 40 ton mechanical press with Brankamp Prokos PK550/3 monitoring, OBRU powered decoiler and safety guarding. Manufacturer: Presse Ross Model: 40V-4 Machine Type: Mechanical Press Year: 2000 Condition: Very Good Includes: Brankamp Prokos PK550/3 Process Monitoring Control OBRU Powered Decoiler Interlocked safety guards Separate control panel with two hand control Machine Description Used 2001 Presse Ross Type 40V-4 40 tonne mechanical eccentric power press, complete with Brankamp Prokos PK550/3 process monitoring control, OBRU powered decoiler, interlocked perimeter safety guarding and separate control panel with two-hand operation. This Italian-built Presse Ross 40V-4 mechanical stamping press has a nominal pressing capacity of 400 kN / 40 tonnes, an adjustable 7–100 mm ram stroke and variable operating speed of approximately 68–203 strokes per minute. The included Brankamp Prokos PK550/3 process monitoring system is designed for monitoring press-production parameters and identifying abnormal process conditions. Brankamp/Prokos systems of this type monitor manufacturing process signals such as pressing/forming forces and can be used to identify deviations during production. Technical Specification Manufacturer: Presse Ross Model / Type: 40V-4 Year: 2001 Serial Number: 02-0297 Press Type: Mechanical eccentric / flywheel press Nominal Press Force: 400 kN / approx. 40 tonnes Ram / Slide Guides: 4 Adjustable Stroke: 7–100 mm Ram / Slide Adjustment: 60 mm Maximum Shut / Closed Die Height: 275 mm Variable Stroke Rate: Approx. 68–203 strokes/min Nominal Speed: 150 strokes/min Throat Depth: Approx. 200 mm Frame Opening / Passage: Approx. 260 mm Table Size: 600 × 450 mm Table Thickness: Approx. 55 mm Table Opening: Approx. 120 mm Ram / Slide Surface: 400 × 260 mm Tool Shank / Ram Bore: 50 mm Motor Power: 3.2 kW Motor Speed: 2,000 rpm Electrical Supply: 380 V / 50 Hz Maximum Flywheel Speed: Approx. 203 rpm Compressed Air Supply: Approx. 0.5–0.7 MPa Machine Weight: Approx. 2,600 kg Included Equipment Brankamp Prokos PK550/3 Process Monitoring Control Process monitoring equipment for monitoring press operation and production parameters, useful for detecting process deviations and helping protect tooling and production quality. OBRU SAH 1M Powered Decoiler The machine is supplied with an OBRU SAH 1M powered / motorised decoiler, suitable for unwinding coil strip for feeding into the press. Safety Equipment Interlocked safety guarding Separate operator control panel Two-hand press control Guard interlocking Emergency-stop controls Machine Highlights 40 tonne / 400 kN capacity Variable-speed mechanical press 7–100 mm adjustable stroke Up to approximately 203 strokes/min 600 × 450 mm bolster/table Brankamp Prokos PK550/3 process monitoring OBRU powered decoiler included Interlocked safety guarding Separate two-hand control station Italian-manufactured Presse Ross press Condition Used machine. Please contact us for further information, photographs, availability, inspection arrangements and pricing. Lodez It Dmepfx Akwoah Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith. Prospective purchasers should independently verify all important specifications and machine suitability before purchase.

Condition: used, Primultini cast iron band saw with 100 cm flywheel and tilting table, maximum useful board passage 90 cm. 10 HP motor power. Used. Lasdpfx Akezz Rmuswsh

Condition: ready for operation (used), Year of construction: 2018, stroke length: 160 mm, table width: 4,325 mm, total height: 2,630 mm, overall weight: 33,000 kg, product length (max.): 2,750 mm, Mechanical stamping press manufactured in 2018. This PME PE 400-1700 C features a nominal pressing force of 4000 kN and a machine weight of 33,000 kg. It has a maximum ram adjustment of 180 mm and can accommodate tool dimensions of up to 1100 x 800 mm. If you are looking to get high-quality stamping capabilities, consider the PME PE 400-1700 C machine we have for sale. Contact us for further details. Leds Adp E Sspfx Akwoah - Total Power: 50 kW- Voltage: 400 V- Frequency: 50 Hz- Basic Machine Position: Top Dead Center (O.T.)- Max. Engagements in Single Stroke: 15 /min- Max. Permissible Speed of Flywheel: 290 1/min- Max. Ram Adjustment: 180 mm- Stroke Height Min./Max.: 30 mm / 160 mm- Stroke Rate Min./Max.: 10 /min / 60 /min- Max. Shut Height : 660 mm- Max. Tool Dimensions (L x W): 1100 x 800 mm- Upper Tool Weight: 2400 kg- Lower Tool Weight: 2400 kg- Pneumatic System Pressure Min./Max.: 3.5 / 10 bar- Pneumatic Clutch-Brake Combination Pressure Min./Max.: 3.5 / 6 bar- Lubrication System Power: 1.0 kW- Lubrication Operating Pressure: 50 bar Technical Specification Stamping Force 4000 Kn

Condition: excellent (used), 1 flywheel 1260 mm Ø, weight approx. 500 kg 1 flywheel, 1320 mm in diameter x 220 mm wide, approx. 40 mm ring thickness Laodpfx Akowb A Sfewsh

Year of construction: 2020, condition: excellent (used), We offer an eccentric press, Sangiacomo T50 RCE. Fully functional, in very good condition, can be tested, we will arrange loading, more information by phone. Includes documentation. Pressing force: 50 tons Type: mechanical eccentric (C-frame) Work table: approx. 750 × 440 mm Lajdpfx Aez I Uk Uskwjh Stroke: 12–110 mm Number of strokes: approx. 40–100 / min (depending on the mode) Drive: flywheel (eccentric) Motor power: approx. 3 kW Weight: approx. 3,400 kg Mechanical press Sangiacomo T50 RCE, manufactured in 2020, high precision, suitable for cutting and forming sheet metal. Robust construction, continuously adjustable stroke and high productivity.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, power: 720 kW (978.93 HP), color: black, output voltage: 400 V, continuous power (apparent): 800 kVA, output frequency: 50 Hz, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model: MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 Lajdpowx H Hzsfx Akwjh UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: excellent (used), Year of construction: 2002, power: 3.2 kW (4.35 HP), pressing force: 40 t, overall weight: 2,600 kg, 2000 Presse Ross 40V-4, 40-ton mechanical press Manufacturer: Presse Ross Model: 40V-4 Machine type: Mechanical press Year: 2002 Condition: Very good. Requires servicing/adjustment as it has been idle for a few years. No process control. Two-hand control Machine description: Used Presse Ross model 40V-4, a 40-ton mechanical eccentric press, manufactured in 2002. This Italian-made Presse Ross 40V-4 mechanical stamping press has a nominal pressing force of 400 kN / 40 tons, an adjustable stroke length of 7–100 mm, and a variable operating speed of approximately 68–203 strokes per minute. Technical specifications: Manufacturer: Presse Ross Model/Type: 40V-4 Year: 2002 Serial number: 02-0313 Press type: Mechanical eccentric / flywheel-driven press Nominal pressing force: 400 kN / approx. 40 tons Adjustable stroke length: 7–100 mm Ram/slide adjustment: 60 mm Maximum closing/mold height: 275 mm Variable stroke speed: Approx. 68–203 strokes/min Nominal speed: 150 strokes/min Working area depth: Approx. 200 mm Frame opening/passage: Approx. 260 mm Table size: 600 × 450 mm Table thickness: Approx. 55 mm Ram/slide surface area: 400 × 260 mm Tool shank / ram diameter: 50 mm Motor power: 3.2 kW Motor speed: 2,000 rpm Electrical supply: 380 V / 50 Hz Maximum flywheel speed: Approx. 203 rpm Compressed air supply: Approx. 0.5–0.7 MPa Machine weight: Approx. 2,600 kg Two-hand control of the press Condition: Used machine. Functioned perfectly but has been idle for a few years. Requires service/adjustment. Please contact us for further information, photographs, availability, inspection possibilities, and prices. Note: All specifications, dimensions, capacities, and descriptions are approximate and provided in good faith. Potential buyers should independently verify all key specifications and the machine's suitability before purchase. Laodpsz Sqx Refx Akwsh

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total width: 1,700 mm, total height: 1,500 mm, total length: 3,050 mm, briquette diameter: 90 mm, overall weight: 5,800 kg, type of input current: three-phase, power: 80 kW (108.77 HP), year of last overhaul: 2014, Equipment: cooling unit, emergency stop, Complete, turnkey production line for wood briquettes based on the C.F. Nielsen BP 6000 mechanical briquetting press – a benchmark for high-density, round briquettes. The line covers the entire technological cycle and is offered as a single package with all auxiliary units. Process: raw material storage → metered screw feeder → high-pressure pressing → cooling line → automatic squaring saw → roller conveyor → two-stage Kallfass packaging (film wrapping + heat shrinking). Key data – C.F. Nielsen BP 6000 press: Round briquette Ø90 mm Output 1,200–1,800 kg/hour (depending on the material) Main motor 55 kW with soft starter Siemens PLC control Lubrication on bronze bearings Dimensions ~3,050 × 1,700 × 1,550 mm, weight ~5,800 kg Included: 2 flywheels, control cabinet, Grundfos oil cooler, Ø90 mm dies Scope of supply (complete line): C.F. Nielsen BP 6000 mechanical briquetting press Feed hopper (~1,300 × 1,300 × 1,200 mm) Mixing and transport screws Feeder with rotary valve + control cabinet OBL MB 75 PP metering pump (max. 420 l/hour) Cooling line – 10 × tube Ø90 × 3,000 mm, with supports Most MBC 100 P squaring saw (disc Ø350/30 mm, cut 100 × 100 mm) Roller conveyor (3,500 × 490 mm, 46 rollers) Kallfass Wrapmat 900 wrapping machine Kallfass 950 Uni heat shrinking tunnel (27 kW) with KORA PACKMAT friction feeder Condition: according to documentation, machines are fully refurbished and stored in original packaging, unused. Some units (cooling line, saw) are still in crates; the feeding section is shown installed. Offered as a single, complete line, sold “as is” – inspection is welcome. Ideal for manufacturers of wood/biomass fuel briquettes (sawdust, wood chips, wood shavings) who are looking for a proven European line at the price of a single used press. Ledpfx Ajztq Hxekwoah Price: €80,000 net (excluding VAT), entire line with all components. Delivery – self-collection, location on request. Photos and technical documentation – upon request.

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, overall weight: 11,500 kg, transport length: 11,800 mm, input voltage: 380 V, transport height: 2,200 mm, transport width: 2,400 mm, Equipment: documentation/manual, PRIMULTINI SE-CEA-IEA 1100 RIGHT-HAND LOG SAWMILL with loader and unloader 1) SE 1100 COLUMN 1100×120 mm flywheels for 130×7500 mm blades electric blade tensioner and blade guide 60 hp engine with automatic starter 2) CEA-IEA CARRIAGE 4 vices with electric clamping and release vice opening 900 mm 3 hydraulic log turners electric spacers with two speeds hydraulic feed with cable rail length 16.5 m control panel 3) COMPLETE AUTOMATION INCLUDING: - 5000 mm 3-way log loader with 4 loading arms - unloading system with 6500 mm motorized conveyor with helical rollers (for side or longitudinal unloading) with 2 pneumatic log handling arms 4) FOUNDATION DRAWING AND OPERATION AND MAINTENANCE MANUAL - disassembled by specialized technicians, ready for loading Ledpfoz Rvdpox Akwjah - transport dimensions: open-top semi-trailer or 40″ open-top container - weight 11,500 kg

Condition: excellent (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, For sale: Drozdowski PRP-58 log saw. Year of manufacture: 2023. The machine has been used very little. Wood is fed by a chain, enabling cutting of logs from 0.8 to 4.5 meters in length. Automated log handling with hydraulic system and side discharge of cut material. Lsdozuwz Eepfx Akwsah The entire unit is mounted on a steel frame, which allows for cutting without the need to chisel the floor or create openings for sawdust and flywheels. A large number of saw blades and spacers in various sizes are included. I also have a blade guide and a sharpening tool for these blades.

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 430 mm, control type: manual, total height: 225 mm, total length: 75 mm, total width: 114 mm, overall weight: 442 kg, Equipment: CE marking, The 710 Super bandsaw is a professional-grade machine, designed to deliver high performance and maximum reliability in woodworking applications. It is equipped with cast iron tables and flywheels, a robust steel frame, and a highly precise, millimeter-graduated blade guide. Lasdo Ab Ducepfx Akwsh The flywheels have a diameter of 700 mm, and the power is provided by a powerful three-phase motor. The work table is tiltable, and the machine comes standard with a guide and protractor. On the lower part, there are two dust extraction ports with a diameter of 100 mm, ready to be connected to a dust extraction system.

Condition: used, Year of construction: 2014, machine/vehicle number: 42, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total height: 2,550 mm, total length: 5,500 mm, total width: 2,200 mm, overall weight: 2,600 kg, saw band length: 5,900 mm, saw band width: 13 mm, We offer a used, fully operational CNC 020 industrial bandsaw with automatic feeder, designed for high-precision cutting of wood or composite materials. The machine features CNC control and automatic feed in X, Y, and C axes, allowing fast, accurate, and repeatable cuts up to 2000 mm in length. Technical data: CNC Cutting Length: 0 – 2000 mm Cutting Height: 0 – 160 mm Cutting Angle: +90° / -90° Cutting Depth: 100 mm Saw band: 5900 x 13 mm Flywheel Diameter: 900 mm Flywheel Upper Adjustment Range: 0 – 80 mm Flywheel Speed: 750 rpm Saw Speed: 2000 m/min Flywheel Motor self-braking 15 HP Forward Movement Speed X-axis: 0 – 70 m/min Return Speed X-axis: 70 m/min Forward Movement Speed Y-axis: 0 – 20 m/min Lasdpfxjxm S E Ae Akwjh Return Speed Y-axis: 20 m/min Pneumatic Pressure: 6 BAR X-axis Motor Torque: 12 Nm Y-axis / Y2-axis Motor Torque 4.3 Nm B-axis / C-axis Motor Torque 1.1 Nm Z-axis Motor Torque: 4.3 Nm Overall Dimensions 5000 x 2200 x 2550 mm Weight CNC 020 2600 kg Additional Information: We have 4 identical machines available, all from similar years of manufacture, in good condition. Ideal for production lines requiring multiple synchronized units or for spare parts standardization.

Condition: used, mileage: 112,000 km, power: 103 kW (140.04 HP), first registration: 05/2009, fuel type: diesel, overall weight: 2,210 kg, next inspection (TÜV): 10/2028, color: white, gearing type: mechanical, emission class: euro4, number of seats: 5, total length: 4,505 mm, total width: 1,794 mm, total height: 1,694 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), 1st owner. Only just over 112,000 total kilometers with service booklet (last service 02/2026 at 110,216 km at a VW dealership). Most inspections were carried out at an authorized VW service center. New TÜV (German technical inspection) valid until 10/2028. Directly from the fleet of a German aid organization. Many of the components that typically need replacing on a VW Touran have already been replaced recently: 2026: New turbocharger 2023: New timing belt 2023: New clutch and new dual-mass flywheel 2023: New front brakes and new rear brake pads The Touran was delivered in the fire department and disaster relief version. It has a STROBEL conversion as an emergency response vehicle with rear-mounted storage, drawers, and a partition grille. LED light bar on the upper part of the tailgate. Previously registered as an NEF (emergency medical response vehicle) "other type of vehicle". 5 seats. Equipped with a special signaling system. Off-road chassis as standard. 8 tires (including rims). Air conditioning. Auxiliary heater (already renewed). Audio system. Cruise control. ABS. ESP. Brake assist. Airbags for driver and front passenger, as well as side airbags. Central locking/remote control (2 original VW remote keys included). 2.0 liter - TDI diesel engine, Euro 4. Green environmental badge. 6-speed manual transmission. 200 km/h maximum speed according to documentation. Additional turn signal lights at the top rear. The Touran is in good condition. It was recently driven to us without any problems for almost 400 kilometers on the highway. The VW has no unusual noises and no error messages. The Touran runs very smoothly and powerfully. The regular maintenance over the years has paid off. According to the aid organization, the power supply located at the bottom left at the rear is currently not functioning. We were unable to verify this ourselves due to a lack of a suitable connection cable. Signs of use are present, but damage and accidents are not known. Laodpjz Iuztefx Akwsh A suitable set of snow chains is also included in the vehicle. The currently mounted, good winter tires with the snowflake symbol are from CONTINENTAL and have a DOT code of 2022. The Touran is available immediately. This offer is only valid for businesses, freelancers of all kinds, as well as for authorities / emergency services / aid organizations of all kinds. Unfortunately, we do not sell to private end consumers. Subject to prior sale and errors. The purchase price is the final price, gross = net (=differential taxation according to §25a UStG. This means that no value-added tax is added to this purchase price and, at the same time, the VAT cannot be calculated separately).

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 1000 kVA –Marelli + Rotabloc Open-type configuration. Availability: In stock (3 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ MarelliGenerator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs MarelliGenerator 1000 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy YOM 2012 Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Lajdpfx Aewuyzwjkwjh Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, mileage: 346,975 km, power: 130 kW (176.75 HP), first registration: 10/2012, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro5, total length: 7,900 mm, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,440 mm, loading space height: 2,390 mm, Year of construction: 2012, Equipment: ABS, M-Benz Atego 818 L SAXAS box van VIN: L698683 Chassis / Components: * Wheelbase: 4,260 mm * Leaf / Air suspension * Tires: 255/75 R17.5 * Remaining tread: Front approx. 90%, Rear approx. 60% * Diesel tank 180 L // Plastic * 1 x AdBlue tank * Fixed fifth wheel coupling 40 mm * Ball hitch Cab: * S-cab * 3 seats * Sleeper cab * Roof hatch * CD radio Body: * SAXAS furniture box van * Type: MKD 61 M, Year of construction: 09 / 2012 * Dimensions: 6.10 m x 2.44 m x 2.39 m * 3 x cargo securing rails per side Engine / Transmission: * 177 hp / 130 kW // 4,249 cc // Euro 5 * Manual gearbox, 6 gears * Engine brake Weights: * Gross vehicle weight: 7,490 kg * Unladen weight: 5,270 kg * Payload: 2,220 kg Other: * German vehicle * MOT valid until 07 / 2027 * Release bearing, flywheel, clutch – new, invoice available. ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export/transfer plates, and we can also arrange for the transfer of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing & typographical errors, changes, prior sale, and errors. Subject to change! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Laedpjz Nb Ddsfx Akwsh Our service for you: Loading of vehicles We will gladly assist you with loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day licenses / Export plates We will gladly assist you in obtaining export plates / short-term registration. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: used, mileage: 346,975 km, power: 130 kW (176.75 HP), first registration: 10/2012, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 07/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 7,900 mm, total width: 2,550 mm, total height: 3,500 mm, loading space volume: 36 m³, loading space length: 6,100 mm, loading space width: 2,450 mm, loading space height: 2,380 mm, Year of construction: 2012, Equipment: ABS, M-Benz Atego 818 L SAXAS box van VIN: L698683 Chassis / Components: * Wheelbase: 4,260 mm * Leaf / Air suspension * Tires: 255/75 R17.5 * Remaining tread depth: Front ~90% Rear ~60% * Diesel tank 180 L // Plastic * 1 x AdBlue tank * Fixed fifth wheel coupling 40 mm * Ball hitch Cab: * S cab * 3 seats * Air conditioning * Sunroof * CD radio Body: * SAXAS furniture box van * Type: MKD 61 M, Year of manufacture: 09/2012 * Dimensions: 6.10 m x 2.44 m x 2.39 m * 3 x Load securing bars per side Engine / Transmission: * 177 hp / 130 kW // 4,249 cc // Euro 5 * Manual transmission, 6 gears * Engine brake Weights: * Gross vehicle weight: 7,490 kg * Unladen weight: 5,270 kg * Payload: 2,220 kg Lajdpfx Asz Nb Dkjkwjh Other: * German vehicle * MOT valid until 07/2027 * Release bearing, flywheel, clutch – new, invoice available. ---- New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer registration plates; furthermore, we can arrange for the delivery of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, prior sale, and errors. All rights reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. A wide variety of vehicles can be found on our 11,000 m² site. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading vehicles We will gladly help you with loading your purchased vehicles. Organizing special transports We will gladly help you with organizing special transports. Day passes / Export registration plates We will gladly help you with obtaining export or short-term registration plates. Handling customs formalities We will gladly assist you with handling customs matters.

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: Lajdpfsy El U Dex Akwsh – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: repair required (used), functionality: fully functional, mileage: 287,268 km, power: 132 kW (179.47 HP), first registration: 04/2010, fuel type: diesel, overall weight: 3,000 kg, tire size: 17 Zoll, color: grey, gearing type: automatic, emission class: euro5, number of seats: 9, Year of construction: 2010, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, power assisted steering, sliding door, traction control, trailer coupling, winter tires, ATTENTION – The engine has increased oil consumption and slight vibrations due to a defective dual-mass flywheel. Ledpfx Akjwmqdasweah The vehicle is therefore sold as defective without warranty. The vehicle is fully roadworthy. The vehicle registration certificate has expired. Equipment: ABS, ASR, ESP, driver's airbag, passenger's airbag, third brake light, electrically adjustable exterior mirrors, electric windows, headlight range adjustment, fog lights, radio central locking and immobilizer, air conditioning, hands-free system, height-adjustable driver's seat with armrest, cup holder, power steering, leather-wrapped steering wheel, steering wheel adjustment, cruise control, CD-MP3 radio, sliding door on the right, rear hinged doors with window, rear window heater with wiper, winter tires, rubber cargo floor, cargo securing eyes, sliding window on the left, 17-inch tires, 17-inch chassis, trailer hitch, DPF EURO5 Total weight: 3000 kg, towing capacity: 2500 kg Subject to change and errors.

Condition: used, mileage: 272,115 km, power: 62 kW (84.30 HP), first registration: 04/2018, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €9,200 net * Volkswagen T6 Kombi 2.0 Tdi L1H1, 9 seats, air conditioning, sliding door, Euro 6 * Seats: 9 (3+3+3) * 5-speed transmission * Front airbags * Armrest * Electric windows * Electric mirrors * Central locking * Steel rims * Isofix * Air conditioning * ABS * ASR * Radio/CD player * Daytime running lights * Start/Stop system * Tire pressure monitoring system * Sliding door on the right * Wheelbase: 300 cm * Unladen weight: 1738 kg * Permissible total weight: 3000 kg * Passenger car registration * Vehicle No. 58 Timing belt replaced at: 233,000 km Lajdpfsyy T Nxjx Akwjh Dual-mass flywheel makes noise. OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment...) CONTACT DETAILS Telephone: WhatsApp Email: Transfer and customs plates (export number) available from us. Subject to errors, typos, and prior sale. Technical specifications and equipment features must be checked separately. The condition as per the contract is only what is inspected on-site at the time of purchase and confirmed in writing. Please arrange an appointment...

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Lodpjz Slnhjfx Akwjah Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: as good as new (ex-display), Year of construction: 2021, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 350 mm, cutting width (max.): 520 mm, control type: manual, roller diameter: 540 mm, pivoting range: 15 °, actuation type: manual, rotational speed (max.): 950 rpm, total height: 1,970 mm, total length: 870 mm, total width: 620 mm, overall weight: 234 kg, table height: 840 mm, Equipment: documentation/manual, motor brake, • Heavy-duty design with high weight for maximum smooth operation • Cast-iron flywheels with rubber coating and cleaning brush • 3-roller precision saw blade guide as standard, located at the top and bottom • Large cast-iron saw table, swiveling from 0° to +15° with a ground and polished surface • Precise cutting height adjustment via rack and pinion with millimeter scale • Particularly quiet and precise operation thanks to the torsion-resistant machine housing • Large cast-iron parallel guide with round bar guide, easily adjustable • Saw blade tension indicator Laedpfx Akjzvd Egswjh • Self-braking motor

Condition: used, Raskin Mechanical Eccentric Press – Approx. 35 Tonnes Used Raskin mechanical eccentric press with a C-frame design, flywheel drive, and ribbed worktable. Suitable for metalworking workshops and small-scale production, including punching, stamping, forming, and other light press operations with appropriate tooling. Technical specifications: Manufacturer: Raskin Type: Mechanical eccentric press Frame: C-frame Estimated pressing force: approx. 35 tonnes (unverified) Overall dimensions: approx. 1000 × 900 × 1900 mm Condition: Used Quantity: 1 unit Reference number: 46126-35825 Condition and additional information: The machine is offered in used condition, as shown in the photographs. The pressing force and dimensions are based on preliminary information and have not been independently verified. Lodpfx Akj Aa Arwowjah The mechanical system, electrical components, and safety equipment should be inspected before operation. Operating condition has not been verified. Tooling and other equipment visible nearby are not included in the sale. The press is available for inspection in Gātciems, Latvia, LV-2105. Please contact us for further information or to arrange an inspection.

Condition: used, mileage: 1,000,820 km, power: 220 kW (299.12 HP), first registration: 01/2011, fuel type: diesel, number of seats: 40, gearing type: automatic, emission class: euro5, color: beige, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Mercedes Benz Citaro O530 Ü 100 Km/h (40+1+3 emergency seats) with seatbelts, full air conditioning (Vehicle 729) First registration: 18.01.2011 1,000,820 km Engine: 11,967 ccm 220 kW / 300 hp Bluetec 5 EEV MOT valid until 10/2026, TÜV (technical inspection) valid until 04/2027 Permissible gross vehicle weight (GVW) 18,600 kg, unladen weight 11,760 kg, payload 6,840 kg Overall length 11,950 mm x overall width 2,550 mm x overall height 3,400 mm Tires 275/70R22.5, front approximately 90%, rear approximately 40/40% Double doors front and rear Driver's cab with door Ramp Fully automatic transmission Microphone Electric windows 2 x electric + heated mirrors Full air conditioning Auxiliary heating + 2nd heater Stop brake 40+1+3 emergency seats Emergency exit 12-volt socket Chassis with slight surface rust 01.12.2024: Air suspension on the rear axle, left side, replaced 20.02.2024: Air conditioning compressor replaced 20.03.2024: Axle ventilation replaced ABS sensor on the rear axle, right side, replaced with sealant Rear axle hub replaced Front axle triangular wishbone replaced 06.05.2024: Rear axle, right side, sensor replaced 10.07.2024: Triangular wishbone, right side, lower arm replaced Air suspension on the rear axle, left side, rear, replaced Multi-circuit safety valve replaced Lajdpfx Akez H Ecfjwjh 24.09.2024: Water hose for transmission cooler, thermostat, and water filter replaced 08.08.2025: Front axle brake pads replaced 08.08.2025: Rear axle brake pads replaced 06.01.2026: 6 x valve covers replaced 20.02.2026: Seal between crankshaft and flywheel replaced Stabilizer bar on rear axle replaced Various signs of wear and tear, consistent with age Last inspection on 02.10.2025 at 974,472 km, next inspection due at 1,034,472 km Price: 8,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the district court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Errors, typos, and prior sale are subject to change.

Year of construction: 2006, operating hours: 14,000 h, condition: used, functionality: fully functional, We offer a used Terex Fuchs MHL 320 material handler, manufactured in 2006. The boom with grapple has been refurbished, and new hoses have been installed. Excellent condition. Warranty included. Type and series: MHL 320 Serial number: 3201100680 Permissible maximum weight: 19500 kg Year of manufacture: 2006 Permissible load on the front axle: 10000 kg Permissible load on the rear axle: 10000 kg Net power at the flywheel: 84 kW Lodpfx Aksy Uv Srowjah Standard operating weight: 19000 kg If you have any questions or require further information, please do not hesitate to contact us.