Used Flottweg Decanter Z73-4/454 for sale (58,593)

Condition: used, Plant: Used decanter / centrifuge Manufacturer: Flottweg Model: Solid bowl centrifuge Type: Z73-4/454 Machine No.: 010.014.04 Nwodpoppa Tcjfx Ahzsk Year of construction: 1999 Drum: max. speed. 2800 min-1 Perm. sediment density: 1,3 kg/dm3

Condition: used, Machine No.: 010.013.04 Year of manufacture: 1999 Drum: max. speed. 2800 min-1 Perm. sediment density: 1,3 kg/dm3 Nwedoppa S Rjpfx Ahzjk

Condition: used, Year of construction: 2018, System: Decanter Type: Flottweg C4E-4/454 Complete dewatering system in container Year of construction: 2018 Sludge throughput: approx. 0-40m3/h Solids capacity: max. 1.2 TS/h Equipment: front double door, side entrance door, fan heater, lighting, sockets, etc. Rotor: max. speed 3650 min-1 Drum diameter: 470 mm System: Container system Interchangeable bridge system for accommodating the downstream system components. Piped and wired ready for operation as a functioning unit. Container system design: Stand construction, clad with sandwich panels and holders for transportation with interchangeable bridge systems. Nwedpfx Aju R Icmjhzek Accessories: FHM preparation station PolyMix 4000SP, measuring equipment, switchgear Feed pump: Seepex BN 52-6LS Discharge conveyor: SS D320 double trough spiral conveyor Dimensions: L 7820mm x W 2500 mm x H 3880 mm Empty weight: 14500 kg Weight in operation: 15000kg Voltage: 400V Power consumption: 142 A Power consumption max.: 70kW Fuse protection: 250 A Frequency: 50 Hz Sludge inlet: DN 100 Centrate drain: DN200 Solids discharge: Spiral conveyor Further information: see photos

Condition: good (used), Year of construction: 1997, Name: Flottweg decanter centrifuge Manufacturer: Flottweg Type: Z4D-3 / 454 Year built: 1997 Permissible sediment density: 1,5 kg/dm3 Max. bowl speed: 4.000 rpm Inner diameter drum: 420 / 226 mm Material: Stainless steel Max. operating temperature: 100 C° Empty weight: Approx. 3.000 kg Nwsdpfx Ahjzp D U Ujzsk Technical doc.: Yes Accessories: A control cabinet, a hydraulic system Condition: Used-good Price: By request

Condition: excellent (used), Year of construction: 2016, operating hours: 500 h, functionality: fully functional, System: Decanter centrifuge as a mobile, fully equipped dewatering unit housed in a container Condition: Used/demo machine, only 500 operating hours Type: Flottweg Z3E-4/451 Year of manufacture: 2018 Max. bowl speed: 5250 rpm Standard wear protection: 8° cone Differential: 1.5–29 min-1 Torque: 2750 Nm System: The "all-purpose" Flottweg Z3E-4/451 is a high-performance two-phase decanter, designed for the separation of solids and liquids. ROBUST DESIGN for separating various types of sludge, such as manure, digestate, industrial sludge, wastewater treatment plant sludge and more. Nedpfx Aoy Avtfohzowk

Condition: used, System: Tricanter, 3-phase decanter, three-phase centrifuge Flottweg Z4D-4/441, used Year of manufacture: 1998 Bowl diameter: approx. 420 mm Max. rotational speed: 3500 rpm Sediment density: 1.8 kg/dm³ Application: This powerful Flottweg three-phase decanter centrifuge is specifically designed for the continuous separation of solids and two liquid phases. Compared to standard decanters, this system offers significantly enhanced process capabilities, particularly when handling complex media. System: Complete skid-mounted unit Equipment: Flottweg three-phase decanter - electric drive unit - pump system - piping & valves - maintenance platform Nodpfxoy Eyf Do Ahzowk - complete skid assembly Typical applications: Oil/water separation - food industry (e.g. vegetable oils) - chemical industry - recycling & environmental technology - emulsion and sludge treatment

Condition: used, Used Alfa Laval 4500 series model XMNX 4545 stainless steel decanter centrifuge. Bowl 450/258mm diameter X 1460mm long. Maximum solids density 1.2 kg/dm3. Bowl belt driven by 30 kW motor and gearbox at maximum 3250 rpm. Includes Netzsch type IE 50 BK stainless steel mono feed pump driven by 4 kW motor. Also includes spare stainless steel scroll. Design capacity 16 cubic meter/hour input with 0.5% dry solids and output with 5% dry solids. Mounted on frame with solids collection tank. Specifications: Material Of Construction: Stainless Steel Motor Power: 40.2 hp Max Bowl Speed: 3,250 RPM Size: 4500 Conveyor Material: Stainless Steel Nwjdszvyklopfx Ahzok Other Extras: Netzsch type IE 50 BK stainless steel mono feed pump

Year of construction: 2018, condition: used, Solid bowl screw centrifuge max. speed. 2200 min-1 Nwodpfx Aeppa S Aohzsk

Condition: used, System: 2-phase decanter Type: Flottweg Z23-401 External dimensions of drum: approx. 320 mm 2-phase decanter: discharge with centrate via peeling disc Discharge: adjustable from the outside with 1 bar pressure Max. drum speed: 6100 rpm Density: 2.4 kg/dm3 max. sediment density Nwedpjvz Rzvefx Ahzsk

Condition: used, Year of construction: 2001, inner diameter: 450 mm, wall thickness: 11 mm, overall weight: 3,200 kg, System: Decanter / centrifuge, used Manufacturer: Hiller Model: DP45-422 Mach. No.: 2818 Year of manufacture: 2001 Maximum drum speed: 3800 l/min Drum inner diameter: approx. 450 mm Nwedpfx Ahjvz A Uzszjk Drum wall thickness: 11.0 Drum material: H2/ST52 Weight: approx. 3200 kg Permissible density 1.50 kg/dm3

Year of construction: 2002, condition: used, Plant: Used decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Decapress Machine No.: 2884 Year of construction: 2002 Maximum drum speed: 3800 I/min Inner diameter of bowl: approx. 450 mm Nodpfx Aheppt Sfezswk Drum material: HII/St52 Electric motor: 30 kW Total mass: approx. 3650 kg Purchase and rent possible.

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Njdpfx Ahjy Dt A Tjzjwk Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: used, Year of construction: 1991, Flottweg three-phase decanter, Z4D-3/441, last used in a fruit juice plant. Inner drum diameter: 420 mm Inner drum length: 1245 mm Drum wall thickness: 10 mm The medium to be separated is fed into the hollow center axis of the decanter. Centrifugal force causes the solids to collect on the drum shell. A cylindrical-conical screw conveyor transports the ring of solids to the discharge openings, where it is ejected into the solids housing. The two liquid components separate according to their specific density and form two hollow liquid cylinders. The diameter of the liquid rings can be adjusted using a peeling disc and overflow weir. One of the two phases is discharged without pressure and one is discharged under pressure via the paring disc. The moisture content of the solids and the purity of the liquids can be controlled by: - Varying the phase separation discs and paring diameter - Decanter speed - Screw speed Additional title: 3-phase decanter Max. bowl speed: 4000 r/min Max. sediment-density: 1 g/cm³ Max. ambient temperature: 100 °C Mass moment of inertia: 15.5 kgm2 with an empty drum Nwedpfx Ahjyr Iccszek Weight: 2250 kg Material: housing from stainless steel 1.4301 (AISI 304); drum made of high-strength cast stainless steel 1.4463 Position: free standing Base construction: Horizontal decanter drum in steel frame, on square tube frame with dome feet Features: Base with rubber mountings, electric motor (Loher 180 M, 22 kW)

Condition: excellent (used), Year of construction: 2003, table length 900 mm table width 900 mm x-travel 457 mm y-travel 508 mm z-travel 406 mm control Brown & Sharpe weight of the machine ca. 250 t Njdsx Szp Dspfx Ahzjwk dimensions of the machine ca. 1300 x 1000 x 1600 m

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,663 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,200 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load Centre: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast Type: Triplex Technical Condition: Very good Front Tyre Type: Cushion Front Tyre Condition: 40 - 60% Rear Tyre Type: Cushion Rear Tyre Condition: 40 - 60% Battery Voltage: 48V Battery Type: PzS Battery Year: 2013 Sideshift, Njdpsxfw Uaofx Ahzewk 3rd valve, full free lift, LED,

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Njdju Au U Tspfx Ahzjwk Weight: 40tn Motor power: 30KW

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 457 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 483 mm, number of axes: 3, This 3-axis ETALON Derby 454 was manufactured in 2001. It features a travel of 457 mm in the X-axis, 508 mm in the Y-axis, and 483 mm in the Z-axis. The machine includes a table size of 750 x 550 mm, providing ample workspace for precision measurements. If you are looking to get high-quality measurement capabilities, consider the ETALON Derby 454 CMM machine we have for sale. Contact us for further details. Nodpfxjzkr Aie Ahzowk • Outer length: 750 mm • Outer width: 550 mm

Year of construction: 2012, condition: ready for operation (used), A total of 7 L-Unite Hermetique (Tecumseh) compressors including Johnson Controls pressure regulators and 6 Bitzer heat exchangers are available. 1) Tecumseh TAG4546Z compressor, year of manufacture: 2012, max. operating overpressure: 20 bar, test pressure: 25 bar. 2) Heat exchanger Bitzer K123H, year of manufacture: 2012, refrigerant volume: 5.1l, cooling medium volume: 0.9l, max. pressure refrigerant/cooling medium: 33bar/10bar, max. temperature refrigerant/cooling medium: 120°C/95°C, min. temperature: -10°C. 3) Pressure regulator Johnson Controls P78LCW 9300, documentation available. On-site inspection is possible. Nedpfx Ajwzx T Eshzjwk

Condition: good (used), Year of construction: 2001, - Manufacturer: IDE - Type: 45/4 - Year of manufacture: 2001 - Monovis Ø45mm 25LD - Right-hand analog control - Screw profile: PVC Nwedjuhpiyjpfx Ahzok - 4 heating zones on cylinder - 4 tool heating zones - Motor power: 8.5kW - Up to 60kg/h Good overall condition, very clean machine

Condition: ready for operation (used), Year of construction: 2020, LANG Technik Macro-Grip / Quick-Point Clamping System Package 2 units available 1x LANG Macro-Grip 125 Vise, Type 47205 1x LANG Quick-Point 96 Single Plate, Type 45400 1x LANG Quick-Point 96 Grid Plate, Type 45763 1x LANG Quick-Point 96 Sub-base 100 mm, Type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centers. The system is ideally suited for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short setup times and high repeatability. Advantages: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast retooling thanks to Quick-Point zero-point technology Nsdpfx Ahozuz A Hozjwk Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of wear from ongoing production. Inspection possible by appointment. Shipping or pickup by arrangement.

Condition: ready for operation (used), A concentrate system for thickening and concentrating liquids, typically in the production of juices, concentrates or other liquids in the food industry, is available. Evaporator: horizontal, evaporator stages: 4, operating mode: live steam, heat exchange: preheating/recovery/cooling, condensation: semi-barometric milk condensation, flavor extraction: rectification/floor column. Water evaporation: 4840kg/h, inlet quantity: 6600kg/h, inlet dry matter: 12%, outlet quantity: 1760kg/h, final dry matter: 45%, aroma recovery at 150-fold concentration: 42l/h, steam consumption: 1685kg/h, specific steam consumption: 348g/kg, fresh water consumption: approx. 12700l/h. Documentation available. On-site inspection is possible. Nwedpfx Ahsv Sugqjzjk

Condition: ready for operation (used), Year of construction: 2015, Packaging capacity: 60/min, max. product width: 450mm, max. product height: 200mm, conveyor speed: 8m-30m/min, film thickness range: 10µm-80µm, max. temperature: 170°C, total output: 25kW. Machine dimensions X/Y/Z: approx. 4000mm/2400mm/1800mm, weight: approx. 1500kg, control: Delta. Documentation available. On-site inspection is possible. Nodpfxjudm A Aj Ahzewk

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) Nwodpfxoyr Tlvj Ahzjk 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: good (used), functionality: fully functional, machine/vehicle number: 542, Equipment: Precision six-jaw chuck -- Cylindrical grinding device -- Dividing device -- Nwodpfx Aszutnzshzok Coolant device -- Grinding wheel holder -- Grinding wheels --- Operating instructions .

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 208.025, functionality: fully functional, cutting width (max.): 4,200 mm, cutting length (max.): 4,200 mm, stack height: 2,000 mm, Auction of a panel dividing saw with automatic magazine! TECHNICAL DETAILS Capacity: 4,200 mm x 4,200 mm Saw blade overhang at 90°: 72 mm Saw blade overhang at 45°: 50 mm Saw carriage feed rate (forward): 0-100 m/min Saw carriage feed rate (reverse): 0-100 m/min Feed rate of program slider: 0-25 m/min Program slider return speed: 80 m/min Collet maximum opening: 84 mm Collet positions: 65/245/395/985/1,605/2,225/2,845/3,465 mm Cross-pressure range: 50 - 1,250 mm MACHINE DETAILS Main saw motor: 14 kW Scoring saw motor: 1.5 kW Njdpezhm E Hofx Ahzowk Electrical supply: 400 V, 50 Hz, 3-phase Automatic magazine Magazine dimensions: 33.1 x 9.4 m Magazine height: 3,600 mm Stack height: 2,000 mm Input stack height: 1,900 mm Magazine speed X: 0-150 m/min Magazine speed Y: 0-150 m/min Magazine speed Z: 0-60 m/min Maximum panel weight: 300 kg Length adjustment of vacuum lifter: 2,000 - 4,200 mm Width adjustment of vacuum lifter: 1,000 x 2,100 mm Vacuum pump: 40 m³/h Rotating device: 90°