Used Finishing Mangle for sale (3,257)

Condition: refurbished (used), Year of construction: 2024, Working width 2800 mm Roller width 3000 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 16 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Drive side nach Auftrag Operting side nach Auftrag Drive shaft dia 80 mm ohne Machine will be completely overhauled before delivery, we supply with warranty. Dsdpfjt H Sm Hex Adhecn (Photo shows a similar machine after overhauling in delivery-status), supply of a suitable drive for adaptation into a plant is possible, extra price,

Condition: used, Year of construction: 2024, Working widths 2000 mm Roller width 2200 mm Number of rollers 2 Stück Dcsdpfxetv H T Ee Adhjn Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 11 to Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Liquor trough with displacer + Leitwalze Capacity of dye tub 60 Liter Drive shaft 70 mm dia Hydraulic unit for combined pressure aus Edelstahl Compensator pneum. Entlastung Drive for 60 m/min • 2-Bowl-Finishing padder with one "Swimming Roll" (S-roll), Machine is completely overhauled before delivery, we supply with warranty. (Photo shows a machine in delivered condition). An additional new frequency drive for fitting the machine into a plant is possible.

Condition: used, Year of construction: 2024, Working width 3600 mm Roller width 3800 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Dcedpfxetv H U Ao Adhjn Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 40 N / mm Pressure total 16 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Drive side nach Auftrag Operting side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl • The machine is completely rebuilt before delivery. • We deliver with warranty. • The machine is delivered without drive. • A new drive can be supplied on request and can be adapted to the local conditions. • (The photos show a similar machine in the state of delivery).

Condition: used, Year of construction: 1970, Working width 2400 mm Roller width 2600 mm Number of rollers 2 Stück Supporting roller - dia 295 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 220 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 13 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Drive side nach Auftrag Operting side nach Auftrag Drive shaft dia 80 mm Hydraulic unit for combined pressure • 2-Bowl-High efficiency squeezer with one "Swimming Roll" (S-roll), Machine will be completely overhauled before delivery, we supply with warranty. (Photo shows a similar machines in delivered condition). Dcedstv Ibqspfx Adhsn without drive,

Condition: used, Year of construction: 2025, Working widths 5600 mm Roller width 5800 mm Number of rollers 2 Stück Dedpfx Aoupmf Aodhecn Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 28 N / mm Pressure total 16,5 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =13 kW Hydraulic unit for combined pressure aus Edelstahl new 2-Bowl-Paddrer with Swimming roller, System KÜSTERS, (Photo shows an overhauled machine in delivery-status), • additionalnew frequency drive for adaptation into a plant is possible, (extra-price)

Condition: used, Year of construction: 2025, Working widths 5400 mm Roller width 5600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 35 N / mm Pressure total 19 to Cloth guiding system Breithalter,1 Leitwalze Liquor trough with guide roll heb + senkbar Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Dcjdpfxeu Rt R Nj Adhsn Hydraulic unit for combined pressure aus Edelstahl • 2-roller padder with supporting roll and swimming roll, Küsters system, • additional new frequency drive for fitting the machine into a system is possible. • Photos show similar machines in delivery condition • Warranty: 12 months • This machine is completely manufactured after receipt of order.

Year of construction: 1983, condition: used, Working width 3400 mm Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - ebonit 100 Grad shore Pressure line 50 N / mm Pressure total 18 to Cloth guiding system for woven fabrics Breithalter, Leitwalze Dcedpjtv Iggsfx Adhsn Drive shaft dia 80 mm Hydraulic unit for separately pressure in inox Drive side links Operting side angeben • 2-Bowls-Finishing padder with 1 new swimming-roll (s-roll) and supporting roll; • new hydraulic control and pressure application for s-roll • drive motor and new electric control • machine will be completely refurbished before delivery • we grant a warranty for a period of 12 months

Condition: new, Year of construction: 2022, Working widths 4400 mm Dodetv Idfspfx Adhocn Roller width 4600 mm Number of rollers 2 Stück Supporting roller - dia 490 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 340 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 23 to Liquor trough with guide roll heb + senkbar Cloth guiding system Breithalter,1 Leitwalze Drive side nach Auftrag Operting side nach Auftrag Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm required power 30 m/min =10 kW Hydraulic unit for combined pressure Ölteil aus ALU • Machine will be completely new, (Photo shows an new machine in delivery-status), • additional new frequency drive for adaptation into a plant is possible,

Condition: used, Year of construction: 2000, Working width 2800 mm Roller width 3000 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 240 mm Roller covering - ebonit 75 Grad shore Pressure line 45 N / mm Pressure total 13,5 to Cloth guiding system for woven fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side links Drive side rechts Drive shaft dia 80 mm Hydraulic unit for separately pressure Links-Mitte-Rechts Dedotv H U Nspfx Adhecn total power requirement 12 kW weight 4000 kg range L-W-H 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled,

Condition: excellent (used), Year of construction: 2001, Working width 3400 mm Dsdjtv Imtjpfx Adhscn Roller width 3600 mm Number of rollers 2 Stück Supporting roller - dia 340 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 270 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 18 to Clouth guiding system for knitted fabrics geb. Breitstreckwalze Liquor trough with guide roll + Verdrängerkörper Operting side links Drive side rechts Drive shaft dia 80 mm Hydraulic unit for separately pressure aus Edelstahl main drive motor 15 kW total power requirement 20 kW weight of the machine ca. 6 t range L-W-H 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough entrance • 3-Roll-compensator at outlet of the machine, self-aligning roll can be pneumatically loaded and unloaded • Machine in complete condition, New FI control is still being added

Condition: used, Year of construction: 2006, Working widths 2200 mm Roller width 2400 mm Number of rollers 2 Stück Supporting roller - dia 270 mm Roller covering - soft rubber 75 Grad shore Swimming roll - dia 210 mm Roller covering - soft rubber 75 Grad shore Pressure line 50 N / mm Pressure total 12 to Cloth guiding system 2 Profilbreithalter,1LW Liquor trough with guide roll und Doppelwandheizung Drive side nach Auftrag Operting side nach Auftrag Dcedstv Iamjpfx Adhon Hydraulic unit for combined pressure aus Edelstahl Liquor trough with displacer +1 Leitwalze Compensator pneum. Entlastung Drive shaft Durchmesser 70 mm • Machine will be completely overhauled before delivery, we supply with warranty, • Cloth guiding for knitted fabrics - 2 driven profile expander, (Photo shows an overhauled machine in delivery-status), • additional new frequency drive for adaptation into a plant is possible,

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We are offering this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Dcodpfx Adozhbd Rshen Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2023, operating hours: 16 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling Dodpfjz E A Hxsx Adhscn 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. Dsdozzlqnspfx Adhecn The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: repair required (used), Year of construction: 2014, functionality: limited functionality, type of input current: three-phase, input voltage: 380 V, total length: 1,800 mm, total width: 1,500 mm, total height: 2,550 mm, inner diameter: 320 mm, workpiece height (max.): 75 mm, grinding wheel diameter: 720 mm, overall weight: 2,800 kg, input frequency: 50 Hz, Equipment: documentation/manual, 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine Used 2014 Lapmaster DSG 720 Double Side Fine Grinding Machine for Sale – 720mm Grinding Wheels – 6 Carriers – Siemens SIMATIC Touch Control – Coolant Filtration System Manufacturer: Lapmaster International Model: DSG 720 Machine Type: Double Side Fine Grinding Machine Year: 2014 Control: Siemens SIMATIC Touch Control Condition: In storage, Functional but top grinding plate damaged. Machine Description The Lapmaster DSG720 is a precision double-sided fine grinding machine designed to process both parallel faces of components simultaneously. This type of machine is suited to applications requiring close control of flatness, parallelism, thickness and surface finish. This machine is equipped with 720mm outside-diameter grinding wheels, a 6-carrier workholding system, independently controlled upper and lower grinding wheel speeds and a Siemens SIMATIC touchscreen control. Important Condition Note The top grinding plate / upper grinding wheel assembly is damaged and requires replacement. The machine is therefore being offered with this known defect clearly disclosed. Prospective purchasers should allow for the replacement of the top grinding plate before returning the machine to normal production use. Main Specifications Manufacturer: Lapmaster International Dodpfxez E A Ico Adhscn Model: DSG 720 Year: 2014 Machine Type: Double Side Fine Grinding Machine / Double-Sided Grinding Machine Grinding System Grinding Wheel Outside Diameter: Approx. 720mm Grinding Wheel Inside Diameter: Approx. 320mm Wheel Size: Ø720 x Ø320mm Number of Workpiece Carriers: 6 Upper Grinding Wheel Speed: 0–130 rpm Lower Grinding Wheel Speed: 0–130 rpm Inner Pin Ring Speed: 0–100 rpm The double-sided grinding arrangement allows both sides of suitable components to be processed simultaneously, helping achieve consistent component thickness and parallelism. Electrical Specifications Operating Voltage: AC 380V, 3 Phase Frequency: 50Hz Installed Power: Approx. 18kW Current: Approx. 50A Pneumatic Requirements Normal Air Supply: Approx. 5–6 kg/cm² / 0.5–0.6MPa Minimum Working Pressure: Approx. 4 kg/cm² / 0.4MPa Siemens SIMATIC Touchscreen Control: The machine is equipped with a Siemens SIMATIC touchscreen operator control. Coolant Filtration System Included: The Lapmaster DSG 720 is supplied with a separate coolant filtration system. Approximate Machine Dimensions Machine Width: Approx. 1,800mm Machine Depth: Approx. 1,500mm Machine Height: Approx. 2,550mm Net Machine Weight: Approx. 2,800kg Key Features 2014 machine Lapmaster International DSG 720 Double-sided fine grinding process Ø720mm outer-diameter grinding wheels Ø320mm grinding wheel inner diameter 6 workpiece carriers Upper wheel speed 0–130 rpm Lower wheel speed 0–130 rpm Inner pin ring speed 0–100 rpm Siemens SIMATIC touchscreen control Separate coolant filtration system Feed Tables Included 18kW installed power 380V, 3-phase, 50Hz Approx. 2,800kg machine weight Precision simultaneous grinding of both component faces Please Note: All specifications, dimensions, capacities and machine details quoted above are approximate and are provided for guidance only. Prospective purchasers should verify all important specifications, machine condition, tooling requirements and operating requirements prior to purchase.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Djdpfx Adsz Iz Sfehjcn Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: good (used), Year of construction: 2016, This F200XL-VAC is used but has been inspected and is in exceptionally good condition. The F200 XL is a 3-station machine and is standard equipped with the brush height tracking system developed by Q-Fin. In combination with the user-friendly button system, this ensures that both the setup and operation of the F200 are intuitive, resulting in the most operator-friendly machine available on the market. The machine features steplessly adjustable speeds for both the conveyor and the brush(es) and/or grinding head(s) as standard, making all manner of processes and finishing results achievable. You determine the desired finish yourself. The F200 XL can be equipped, as desired, with either a vacuum system (for non-ferrous metals, such as stainless steel and aluminium) or a magnet system (for ferrous metals). These systems ensure effective fixation of the workpieces on the conveyor table, allowing even small parts (from 10x10 mm) to be processed safely, effortlessly, and quickly. For good reason, we at Q-Fin advocate a narrow machine for small workpieces and a wider machine for larger ones. In many cases, the throughput speed of this machine is up to 5 times higher than comparable machines. You can view this machine in our showroom in Bergeijk. Dedpfxjyt Nhvo Adhocn

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox full bleed trimming’ finishing system. Item for sale: 1 x Xerox complete finishing system for brochure production with the following equipment: Includes A-FN13 booklet finisher Includes CZ module A-FN08 Includes 2-page trimming A-GW07 Includes Plockmatic Pro35 WITHOUT IDM You will receive a complete finishing system for complete brochure production. Plug and play connection to various Xerox machines. Xerox Versant 3100 Xerox Verdant 4100 Xerox Versant 180 Xerox Versant 280 and more... Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Dcedpfx Aoxnxy Njdhsn Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: Dcjdpfx Adsl Dw D Eshon 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Year of construction: 2026, operating hours: 7,000 h, condition: used, We offer this used CML Finishing Ghost C Master CML Ghost 6 axis robot painting line, year of construction 2018. Including: 1pcs Master CML Finishing Ghost C robot 1pcs Slave CML Finishing Ghost C robot 1pcs 3D Scanner with dimensions and depth scanners 2pcs Control cabinets with monitors 1pcs Graco Premier 800 pump 5pcs Graco G36W05 pumps Dcjdpfxeyx Sv Ue Adhjn 1pcs Belmeko Spray booth with exhaust and return air system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2024, functionality: fully functional, Manufacturer: Pony Model: KITE Type: Shirt finishing machine Year of manufacture: 2024 Used, with minor signs of wear, in good condition (the fabric of the dummy attachment has a small tear on the left side) Without power plug From a business liquidation Technical data according to the manufacturer: Dedpjz Ibduefx Adhecn With air blast technology for ironing dress shirts, women's blouses, and polo shirts Steam-heated SMALL dummy attachment Shirt tensioning slide, photocell for automatic positioning Automatic device for lateral tensioning of the shirt Semi-automatic front pressing bar, with pneumatic closure Two sleeve tensioning clamps, height-adjustable by gas spring Anatomical attachment of the sleeve in an oval shape, suitable for long and short sleeves Hot air recovery system Touch screen - PLC control for storing programs, diagnostics & programmed maintenance Adjustable feet Mirror Electrically heated 400V/50Hz connection Fan motor: 1.5 kW Extraction motor: 0.25 kW Dimensions (W x D x H): approx. 198 x 126 x 230 cm Weight: 360 kg Accessories: electric ironing unit Inspection or collection is possible by appointment.

Condition: refurbished (used), Year of construction: 2012, operating hours: 19,376 h, functionality: fully functional, machine/vehicle number: 57755, RÖSLER Vibratory Finishing Machine / Rotary Vibrator – fully functional – newly coated – in very good condition For sale is a high-quality vibratory finishing/rotary vibrating system from the renowned manufacturer RÖSLER. The machine is in very good technical and optical condition, is fully functional, and can, of course, be inspected on-site after prior arrangement. Price: €14,500 net A particular advantage of this machine is the condition of the processing bowl: the machine was newly coated directly by the manufacturer RÖSLER. The coating is therefore in very good condition. The machine has been carefully maintained and overall gives a very well-kept impression. Depending on the abrasive media and process used, the system is suitable for deburring, rounding, smoothing, cleaning, and surface finishing of workpieces. Thanks to its robust industrial design, it is designed for professional use in production, metalworking, and surface treatment. Dcjdpsz D Sn Nsfx Adhen The machine is offered including control cabinet/control system and the components shown in the pictures. The control system, drive, and mechanical components are functioning perfectly. The machine is ready for use and fully functional. Condition & Features: * Manufacturer: RÖSLER * Industrial vibratory finishing/rotary vibrating system * Fully functional * Processing bowl newly coated by the manufacturer RÖSLER * Very good technical condition * Well-maintained overall optical condition * Robust industrial design * Including control cabinet/control system * Separation/screening zone and discharge chute available * The machine is currently secured for transport on a pallet * On-site inspection possible by appointment * Selling price: €14,500 net plus statutory VAT.

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Dcedpfx Aszyq Ivodhon Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 indicational EUR 195.000 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: ready for operation (used), Pallet feeder PF Touch screen Navigation with auto set plates rollers 4 plates Dcjdpfjyx Nltjx Adhjn 2 knives Side pocket heidelberg presser stacker delivery

Condition: as good as new (ex-display), Year of construction: 2024, working width: 200 mm, 2024 Deburring and finishing machine F200 XLDS with magnetic support. Suitable for deburring, rounding, deslagging and/or grinding of steel cut parts up to 200 mm wide. This is concerning a F200 XLDS 4-station machine. Type TS, with touch screen. Compared to the standard F200 XL, this machine is equipped with a deslagging roller for removing slag from plasma cut products. The F200 XL deburring machine is the finishing specialist for small workpieces. Suitable for flat ferrous/magentic sheet metal parts between 15 and 200 mm wide. Deburring, slag removal, grinding and edge rounding at high speed. This deburring machine has a deslagging roller ('deslagging hammer') as the first station. The second station is a grinding belt followed by two stationary disc brushes, one rotating clockwise (CW) and the other counterclockwise (CCW). Dodpshnc E Aofx Adhjcn Compared to other deburring machines, the F200 DS has a very high processing speed while being able to achieve more edge rounding. The machine comes standard with a freely adjustable speed for the conveyor belt and the grinding and/or brush head(s), making it possible to perform every conceivable operation and achieve every conceivable result. You determine the desired finish. Simple operation via the HMI touch screen on the front. The magnetic system ensures effective fixation of the products to be machined on the transport table, allowing even small workpieces (from 15 x 15 mm) to be machined safely, quickly and without problems. It is not for nothing that we at Q-Fin are convinced by a narrow machine for small workpieces and a wider machine for large workpieces. In many cases, the throughput of this machine is 5 times higher than comparable machines. Take the test for yourself and make an appointment. We can now offer you this F200 DS - MAG showroom machine built year 2023 possibly in combination with a WES3000 wet working extractor and associated pipe work. Only available until sold. Machine comes with 1 year warranty excl. wear parts. Delivery ex works Bergeijk. If wanted we can also offer the machine including transport, installation and training of your operators on site. The machine is on display in our showroom in Germany. This is the very last F200 XLDS -MAG machine! Please contact us and we will send you an attractive offer.