Used Fermat Vlc 1600 Atc+C for sale (56,621)

Condition: used, Year of construction: 2007, Technical details: faceplate diameter: 1600 mm power requirement: 80 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 4,4 x 4,62 m max. workpiece diameter: 2000 mm Crjdjx Aq E Hepfx Aixef max. diameter of face turning: 1800 mm tool taper: ISO50 The machine has been regularly serviced and is in good technical condition. With C-Axis *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: V16TC1548, workpiece weight (max.): 8,000 kg, workpiece diameter (max.): 2,000 mm, faceplate diameter: 1,600 mm, workpiece height (max.): 1,350 mm, faceplate torque: 18,000 Nm, TECHNICAL DETAILS Faceplate diameter: 1,600 mm Maximum faceplate torque: 18,000 Nm Maximum thread milling diameter: 1,800 mm Maximum facing diameter: 1,800 mm Maximum distance between the faceplate and the clamping surface of the inserted tool slide: 1,550 mm Cedoxvxrbopfx Aixerf Slide dimensions: 220 × 220 mm Maximum workpiece diameter: 2,000 mm Maximum slide stroke: 900 mm Maximum workpiece height when using the 200 mm tool holder: 1,350 mm Maximum workpiece weight, depending on faceplate rotation: 8,000 kg Maximum tool shank diameter: 40 mm Maximum crossrail travel: 800 mm Crossrail feed rate: 170 mm/min Working feed rate: 1–2,000 mm/min Rapid traverse: 10,000 mm/min Feed per revolution: 0.001–50 mm/rev Rotating tool spindle speed, programmable in two ranges 1st range: 1–1,200 rpm 2nd range: 1,200–2,400 rpm Tool holder: ISO50 MACHINE DETAILS Total power requirement: 80 kW Dimensions & Weight Footprint approx.: 4.4 x 4.62 m Machine weight approx.: 25 t EQUIPMENT C-axis

Condition: ready for operation (used), Year of construction: 2008, turning height: 1,200 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,800 mm, table load: 8,000 kg, overall weight: 25,000 kg, Fanuc 18iT-B, C-axis Turning, milling, and drilling capabilities 16-position tool changer Chuck: 1600 mm diameter, maximum turning diameter: 1800 mm, center height: 1200 mm Maximum chuck rotation speed: 250 rpm Maximum allowable chuck load: 8000 kg Chip conveyor Cedpfjzh Uz Aox Aixsrf

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Cedpfxed Aqqzj Aixsrf Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2015, condition: good (used), Deburring machine, used Manufacturer: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross belt stations: 1 Cross belt speed: 2-8 mm/s Feed rate: 0.6-3.2 mm Extraction system: Donaldson Cedpfx Aieikm Tksxjrf Used for edge rounding and removal of sharp edges on both the outer and inner contours of parts made of stainless steel, steel, or aluminum that have been cut in a laser, shear, or stamping machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Condition: used, Year of construction: 2000, Technical details: turning diameter: 1600 mm turning length: 3000 mm centre height: 800 mm turning diameter over bed: 1600 mm turning diameter over bed slide: 1400 mm turning dia. over face-slide: 1200 mm max. workpiece weight between centers: 20 to speeds: 5,6 -800 1/min transmission ratio: 3 spindle bore: 112 mm turret (x-stations): 8 / VDI 60 travel -x axis: 850 mm travel -z axis: 3020 mm rapid power traverse in X-and Z direction: 6 / 10 m/min power maindrive: 46 kW weight of the machine ca.: 22 to. dimensions of the machine ca.: 7,2 x 4 (3,11) x 2,7 m tech-in lathe, flatbed, tailstock, 8-pos. BARUFFALDI turret with 4 live tools, power 9kW, Csdpfx Aehutpvjixorf 4-pos. BARUFFALDI square-headed turret horizontal, C-axis, 3-jaw hydr. chuck SMW Autoblock KNCS 800/165, dia. 800mm, quick adjustment, power cylinder with 2 pressure clamping system, chipconveyor, coolant device, accessories *

Condition: good (used), Nabertherm High-Temperature Furnace 1600 °C The HT 04/16 - HT 450/18 high-temperature furnaces have proven themselves in the laboratory and in production for many years. Csdpfowxwa Eex Aixorf Whether for quartz glass, glass-ceramics, the sintering of CIM components, or other processes up to a maximum temperature of 1800 °C, these furnaces represent the optimal solution for the sintering process. Thanks to their solid construction and compact, floor-standing design, these high-temperature furnaces are ideal for laboratory processes that require the highest precision. Excellent temperature uniformity and sophisticated details set unsurpassed quality standards. Tmax 1600°C Double-walled housing construction with fan cooling, resulting in low outer wall temperatures Heating from both sides via molybdenum disilicide heating elements High-quality fiber insulation with special backing insulation Side insulation, constructed from tongue-and-groove blocks, ensures low heat loss to the outside Durable ceiling insulation with special suspension Parallel swing door with chain guide for defined opening and closing of the door Labyrinth seal ensures minimal temperature loss in the door area Exhaust air vent in the furnace ceiling Heating element control via thyristors NTLog Basic for Nabertherm controller: Recording process data via USB stick Maximum temperature: 1600°C Internal dimensions (mm): 200x200x200 External dimensions (mm): 830x370x590 Volume (L): 4 Connected load (kW): 5.2 Electrical connection: 3-phase Weight (kg): 150 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: repair required (used), functionality: not functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, For sale is an injection molding machine from the Arburg brand and the type 470 C 1600-800 The pump and a card have been removed from the machine, so the machine is being sold as defective. It is otherwise in very good condition Technical data: Pump hours: 61,400 Clamping force: 1600 kN Clear column spacing: 470*470 Ejector travel: 225 mm Screw diameter: 50 mm Displacement: 398 cm³ Dimensions: 4335*1635*1950 mm Cjdpfsv Edriex Aixorf Weight: 6950 kg The machine is offered without peripherals Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, visit us on our website

Condition: used, Year of construction: 2001, functionality: fully functional, 1600 kVA Oil/Hermetic Transformer, Pauwels, year of manufacture 2001, 21kV/0.69, vector group Dyn5, HV plug-in bushings, LV porcelain bushings, Optional: pointer thermometer, full hermetic protection, rollers, connection flags. Credpsxwa S Ejfx Aixsf

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min Credpfxeu Ix I Us Aixjf feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *

Condition: new, fuel type: diesel, overall weight: 1,600 kg, empty load weight: 1,600 kg, Year of construction: 2024, GÜNTER GROSSMANN GG1600 MINI EXCAVATOR, 3-cylinder KUBOTA Günter Grossmann GG1600 Kubota Thanks to close collaboration between Günter Grossmann and Kubota, the new GG1600 excavator has been created. Track excavator Günter Grossmann GG1600. Mini excavator on tracks GG1600, KUBOTA engine, KDK hydraulic pump, VS EATON compressor motor. Very good quality. Standard equipment Excavation bucket 400mm Additional accessories for the machine can be purchased. Model GG1600 is a great machine for the most demanding construction, electrical, and hydraulic companies. We guarantee after-sales service. The excavator is manufactured based on solid European technology. SPECIFICATIONS Model: GG1600Y Brand: Günter Grossmann Weight: 1600kg Bucket capacity: 0.045 m³ / 200kg Engine: KUBOTA Engine power: 15 kw/2300r/min Main pump: Japan – KDK Japan Swing motor: American – EATON USA Travel motor: Korea – KOREA DONGHYUN WORKING RANGE Max. digging depth: 1650 mm Max. vertical digging depth: 1650 mm Max. digging height: 2610 mm Rotation radius: 360° Optional accessories available for order: Ground drill Grab Digging tooth Rake Narrow bucket 200 mm Narrow bucket 380 mm Leveling bucket 500mm Leveling bucket 800mm Quick coupler Breaker hammer GG1600 Credpjggai Uefx Aixof €13,400 excluding VAT GG800 Bn83wivh €5,900.00 including VAT €7,139.00 including VAT GG1000 €9,909.00 including VAT €8,190.00 excluding VAT transport costs on request We deliver to companies and private individuals in the Netherlands and Belgium! With each delivery, you will receive a VAT invoice and (factory) warranty. -Click on 'email this advertiser' and provide your contact details, and we will send you the webshop details. -tel (7 days a week from 8:00 to 23:00) -Collection is possible by appointment, also in the evening and on weekends. Easy payment... -via our webshop -Cash or card payment upon collection/delivery -Via iDeal (request a link via email) For GG 800 details, see our other advertisement. For more information, please call or email us. Lease negotiable.

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Credpfx Aiszf Ivujxof Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 650 mm, travel distance Z-axis: 800 mm, overall weight: 71,400 kg, spindle speed (max.): 105 rpm, spindle motor power: 100,000 W, number of axes: 2, Horizontal machining centre manufactured in 2004. This IRLE IRD 1600 CNC features a maximum pipe diameter processing capability of 1,625 mm and a maximum pipe length of 13,200 mm. It supports a maximum pipe wall thickness of 70 mm and can handle pipe weights up to 250 kN. If you are looking to get high-quality machining capabilities, consider the IRLE IRD 1600 CNC machine we have for sale. Contact us for further details. Crjdjzr Nmujpfx Aixef - Max. Pipe Diameter to be Processed: 1,625 mm- Min. Pipe Diameter to be Processed: 406 mm- Max. Pipe Length to be Processed: 13,200 mm- Min. Pipe Length to be Processed: 6,000 mm- Min. Pipe Wall Thickness: 12 mm- Max. Pipe Wall Thickness (Copying Process): approx. 40 mm- Max. Pipe Wall Thickness (CNC Operation): 70 mm- Max. Pipe Weight to be Supported: 25500 kg- Height between Hall Floor and Pipe Inlet: 800 mm- Total Machine Length: approx. 24,000 mm- Total Machine Width: approx. 4,100 mm- Total Height from Floor to Top of Clamping Vise: 5,000 mm- Total Machine Weight: approx. 71400 kg- Operating Voltage: 400 V, 3-phase, 50 Hz- Control Voltage: 220 V DC / 50 Hz- Nominal Operating Current: 400 A- Intermediate Bed - Bed Length: approx. 3,950 mm- Intermediate Bed - Bed Width: approx. 1,800 mm- Intermediate Bed - Bed Height (incl. chassis): approx. 600 mm- Intermediate Bed - Travel Speed on Foundation Rails: 500 - 5,000 mm/min- Intermediate Bed - Drive Motor Power: 5.5 kW- Headstock - Faceplate Speed Range: 7 - 105 min⁻¹- Headstock - Motor Speeds: 300 - 4,500 min⁻¹- Headstock - Motor Power: 100 kW- Headstock - Motor Power (S1 Duty Cycle): 105 kW- Headstock - Max. Faceplate Torque (S1 Duty): 33,000 Nm- Headstock - Characteristic Speed: 27 min⁻¹- Headstock - Main Spindle Diameter (Front Bearings): 300 mm- Faceplate (X-Axis) - Faceplate Diameter: approx. 1,950 mm- Faceplate (X-Axis) - NC Tool Support Travel Range: approx. 650 mm- Faceplate (X-Axis) - Tool Support Feed Rate (Infinitely Variable): 0.5 - 1,500 mm/min- Faceplate (X-Axis) - Max. Achievable Feed Force: 25 kN- Feed Gearbox (Z-Axis) - Headstock Feed Travel on Machine Bed: 800 mm- Feed Gearbox (Z-Axis) - Feed Rate (Infinitely Variable via AC Servomotor): 0.5 - 200 mm/min- Feed Gearbox (Z-Axis) - Rapid Traverse Speed: 1,500 mm/min- Feed Gearbox (Z-Axis) - Feed Force: 30 kN- Feed Gearbox (Z-Axis) - Feed Motor Torque: 27 Nm- Pipe Clamping Steady Rests - Clamping Range: 406 - 1,625 mm- Pipe Clamping Steady Rests - Pipe Weight Capacity per Steady Rest: 150 kN- Pipe Clamping Steady Rests - Adjustable Clamping Force: 10 - 200 kN- Pipe Clamping Steady Rests - Max. Adjusting Speed of Centrally Moving Clamping Crossbars: 600 mm/min

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Cjdjzrrvxopfx Aixsrf Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), operating hours: 4,738 h, functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Crsdpfx Aszrru Ijixsf Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: ready for operation (used), functionality: fully functional, mileage: 37,457 km, power: 55 kW (74.78 HP), first registration: 09/2016, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, empty load weight: 1,950 kg, next inspection (TÜV): 02/2027, fuel: diesel, wheelbase: 1,600 mm, driver cabin: other, gearing type: hydrostat, emission class: euro5, operating hours: 4,738 h, Equipment: air conditioning, all wheel drive, hydraulics, soot filter, Hako Citymaster 1600 as a winter service vehicle From first owner = former municipal/government vehicle Major engine inspection including timing belt, water pump, oil, oil filter, and fuel filter was carried out at 37,454 in 08/2026 2,584 hydraulic operating hours 4,738 total operating hours 37,457 kilometers Including Kif front sweeper, type CM 1600, 1,300 mm wide, manufactured in 2019 (as new/never used in snow) Including Gmeiner salt spreader, type Husky 500V FS, manufactured in 2019 (as new/used twice for testing) 4x4 all-wheel drive – hydrostatic all-wheel drive Rear view camera Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,016 mm / Width: 1,210 mm / Height: 1,970 mm (without attachments) Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Working speeds selectable 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder VW industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive Cedpfezrruzox Aixerf 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cab with air-suspended driver's seat Air conditioning/heating Water treatment system Fire hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg The spreader is driven and operated by the machine's hydraulics. Other applications are possible through additional attachments from HAKO, such as sweepers, snow plows, and lawnmowers (not included in the scope of supply) Errors, changes, and prior sale are subject to change. We sell exclusively according to our general terms and conditions and with the exclusion of any warranty. Errors, changes, and prior sale are subject to change. We are available for you continuously from Monday to Friday from 9:00 a.m. to 5:00 p.m., on Saturdays by prior appointment, and telephone appointments can be arranged outside of these opening hours. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority, and this applies to our entire vehicle inventory. The above information is non-binding, and errors/changes and prior sale are subject to change!

Condition: used, Year of construction: 2010, Laser cutting machine Manufacturer: Eurolaser Type: LCS XL-1600 Year of manufacture: 2010 Power: 200 W Working area: 2,270 mm x 1,600 mm Electrical data: max. 6 kW / max. 32 A Previous application: Codpfx Aoyvk R Ejixerf Cutting of acrylic glass Laser source renewed in 2021 ä3826

Condition: used, ZERBST DP/S3 cnc Heavy Duty Lathe Crsdpfoztff Nox Aixjf Manufacturer: ZERBST (Germany) Year: 1991 Machine Type: Heavy Duty Facing & Centre Lathe simens control Maximum Turning Diameter: Ø1,600 mm Distance Between Centres: 4,700 mm Spindle Bore: 110 mm Main Motor Power: 55 kW Spindle Speed: 3.5 – 450 rpm Bed Design: Triple guideway cast iron bed Control : Siemens Tailstock: Powered tailstock Thread Cutting: Yes Maximum Workpiece Weight: Up to 12,500 k

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm Crodpfezrpqysx Aixof dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Suitable for steam heating capacity 1.600L. all stainless steel double jacket tiltable drum Crjdpfszi Dfaex Aixof stirring system with spring-mounted scrapers high pressure steam (max. 10 bar) dimensions (l x w x h): ± 4.000 x 2.000 x 2.300 mm + "Berief" Loader for 200L eurobins, Type L25

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, Beam on time: 12,577 hours Credsznir Ajpfx Aixof Laser on time: 72,745 hours Includes Sheetmaster.

Condition: excellent (used), Working travels 1600 x 900 x 800 mm Table size 1700 x 850 mm Spindle taper SK40 Spindle speeds -10'000 rpm Cjdpfxjn Hqa Te Aixerf Tool changer 30 Pos. Control: HEIDENHAIN iTNC530 3D Measuring taper Misc.accessories MARCELS MASCHINEN CH

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M01.16.21.51.02, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,600 mm Travel range Y-axis: 1,200 mm Travel range Z-axis: 500 mm Travel range W-axis: 1,200 mm Travel range B-axis: 360° Spindle speed: 10,000 rpm Spindle motor power: 30 kW Feed drive: Brushless AC servo motors Feed rate: 0–20,000 mm/min Rapid traverse X-axis: 20,000 mm/min Rapid traverse Y and Z axes: 20,000 mm/min Manual mode: 20,000 mm/min Setup operation: 0–2,000 mm/min Table size: 1,500 × 1,500 mm T-slots: 5 × DIN 650-22 H12 T-slot spacing: 150 mm MACHINE DETAILS Credpfsznkpvex Aixof Tool clamping: Hydraulic Electrical connection: 400 V Frequency: 50 Hz Compressed air operating pressure: 6 bar Nominal flow rate: 7,000 rpm

Condition: good (used), Year of construction: 2004, functionality: fully functional, IRLE IRD 1600 CNC End finishing machine Manufacturer: IRLE, Type: IRD 1600 CNC Year of manufacture: 2004, Control: Max. workpiece diameter: 1,625 mm Min. workpiece pipe diameter: 406 mm Max. workpiece pipe length: 13,200 mm Min. workpiece pipe length: 6,000 mm Min. pipe wall thickness: 12 mm Max. pipe wall thickness in copying mode: approx. 40 mm Max. pipe wall thickness in CNC mode: 70 mm Max. pipe weight: 250 kN Height between the hall floor and the pipe inlet: 800 mm Overall machine length: approx. 24,000 mm Overall machine width: approx. 4,100 mm Overall height from floor to top of clamping fixture: 5,000 mm Machine weight: approx. 700 kN 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 01 - Intermediate carriage with travel drive Carriage length: approx. 3,950 mm Carriage width: approx. 1,800 mm Carriage height incl. undercarriage: approx. 600 mm Travel speed on the base rails: 500 - 5,000 mm/min 02 - Headstock Rotational speed range of the faceplate: 7 - 27 - 105 min" Motor speeds: 300 - 1,150 - 4,500 min" Motor power: 100 kW Motor power in S1 operation: 14.3 - 129 - 105 kW Max. torque of the faceplate in S1 operation: 33,000 Nm Rated speed: 27 min" Diameter of the main spindle in the front bearing: 300 mm Crodpfezqun Uox Aixof 03 - Faceplate, X-axis Faceplate diameter: approx. 1,950 mm Travel distance of the NC tool holder: approx. 650 mm Feed rate of the adjustable tool holder: 0.5 - 1,500 mm/min (infinitely adjustable) Max. achievable feed force: 25 kN 04 - Feed drive; Z-axis Feed travel of the headstock on the machine bed: 800 mm, infinitely variable Three-phase controlled servomotor: 0.5 - 200 mm/min Rapid traverse speed: 1,500 mm/min Feed force: 30 kN Torque of the feed motor Mt = 27 Nm 05 - Pipe clamping mandrels Clamping range: 406 - 1,625 mm Pipe weight per mandrel: 150 kN Adjustable clamping force: 10 - 200 kN Max. adjustment speed of the centrally adjustable clamping crossbars: 600 mm/min

Condition: excellent (used), Year of construction: 2011, Table size: 1800 x 800 mm Tool holder DIN 69871: ISO 40 Travel ranges: X-axis: 1615 mm Y-axis: 815 mm Z-axis: 725 mm Table load: 2000 kg Spindle speed range: 0 - 10,000 rpm Feed rate: up to 10 m/min Rapid traverse: 24 m/min Footprint (W x D x H): approx. 5400 x 4550 x 3120 mm Drive power: 15 / 18.5 kW Weight: 10,000 kg Accessories / Special features: Credpjyy Npnsfx Aixsf • CNC control system FAGOR 8055 i/PLUS MS • Internal coolant supply through the spindle, 20 bar • 24-position tool changer • Hinged chip conveyor • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany