Used Ets Solutions Schwingprüfanlage for sale (5,946)

Condition: used, ETS Solutions Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration testing system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. displacement (continuous) 51 mm Max. displacement (shock) 51 mm Max. vibration velocity (sine) 1.8 m/s Max. acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without load 2,250 (Hz ±5%) Max. static load capacity 500 kg Axial frequency of vibration isolation < 5 Hz Flux density < 1mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency >90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (no grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Ground-isolated design to avoid ground loop problems Enabled options: Sine, Random, Shock, RSTD (Resonance Search, Track & Dwell), transient capture Scope of supply: (See picture) Condition: Used Signs of wear and tear due to age and use Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. Nodpfx Abozu Nxioyodc We will gladly answer any further questions by telephone.

Condition: used, ETS MPA102/L620M Shaker Vibration Testing & Horstmann HS 220 Climate Test Chamber System Vibration Testing System: ETS MPA102/L620M Sine Force: 600 kgf Random Force: 600 kgf Shock Force (6 ms, half sine): 1,200 kgf Max. Sine Velocity: 2 m/s Max. Sine Acceleration: 981 m/s² Armature Diameter: 200 mm First Resonance Frequency: 3,300 Hz Dimensions: 943 x 633 x 770 mm Shaker Weight: 730 kg Amplifier Unit: 6 kVA Blower Unit: HP-2 / 4 kW Climate Chamber: Horstmann HS220 Test Chamber Volume: 220 liters Test Chamber Dimensions: 600 x 600 x 600 mm (H x W x D) Temperature Range: -40 to +180 °C Cooling Rate: 2 K/min 3 K/min Heating Rate: 3 K/min 3 K/min Electrical Connection: 400V, 3/N, 50 Hz / 5 kW External Dimensions: 1,630 x 1,700 x 1,200 mm (H x W x D) Used item as shown in the pictures. Nodpfoy Sl Uqsx Abyedc Shipping: The specified shipping costs apply to deliveries within Germany. Worldwide shipping available (please inquire for shipping costs outside Germany). The given shipping costs apply to shipping within Germany. Sale only to commercial customers. No warranty or guarantee. Deviations from the technical data as well as errors in the article description are possible and subject to change.

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Nodpfeicic Hox Abyodc Weight approx. 2000 kg Very good condition

Condition: excellent (used), Year of construction: 2023, operating hours: 300 h, functionality: fully functional, turning length: 658 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, rotational speed (max.): 3,500 rpm, total height: 1,780 mm, total length: 1,729 mm, total width: 3,355 mm, workpiece weight (max.): 520 kg, overall weight: 4,300 kg, PUMA DNT 2600 is CNC lathe used for both rough and fine turning. Very fast and accurate medium-sized turning center. Machine is selling with all the additional equipment that is listed below. Is in excellent condition and regularly serviced. Machine has around 300 working hours. Ndsds Afdlvspfx Abyoc Machine specification: -Model: PUMA DNT2600 -Controller: Fanuc I- Series -Max. turning diameter: 460mm -Max. turning length: 658mm -Left/main spindle: 26kW, 735Nm -15" display -2MB part program storage -Left/main chuck size: 255mm/10 inch -Turret with 10 tools (25x25 OD tool size, 50mm boring bar diameter) -Programable tailstock with live center MT5 -Coolant pump: 5 bar -Automatic tool setter -Parts catcher with a box -Bar feeder interface -DNS tool load monitoring -Signal light (3 colour)

Condition: used, functionality: fully functional, machine/vehicle number: 2919007, Year of construction: 2019, operating hours: 3,300 h, total length: 2,600 mm, total height: 2,700 mm, total width: 1,200 mm, type of input current: three-phase, overall weight: 1,800 kg, input voltage: 400 V, input frequency: 50 Hz, laser power: 400 W, Equipment: compressor, LM SOLUTIONS SLM 280 – 2019 – 800 HOURS – €60,000 Industrial 3D metal printer for sale – Proxicad Srl, Italy Proxicad Srl is offering for sale an SLM Solutions SLM 280, an industrial machine for the additive manufacturing of metal components, year 2019. The machine is used and is stated to be in perfect working order, with 800 operating hours recorded. The SLM 280 is intended for industrial applications requiring the production of metal components using laser powder bed fusion (LPBF) technology. Key features: Brand: SLM Solutions Model: SLM 280 Year of construction: 2019 Operating hours: 3300 Condition: used, in perfect working order according to the seller Location: Abruzzo, Italy Ndjde Ad Nypjpfx Abyoc Asking price: €50,000, negotiable

Condition: like new (used), Year of construction: 2022, operating hours: 400 h, functionality: fully functional, turning length: 1,030 mm, turning diameter: 460 mm, spindle bore: 81 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 265 mm, travel distance Z-axis: 1,100 mm, Doosan Puma GT2600LM, 2022. Machine with only 400 operating hours. Excellent condition. Fanuc 0i-F Plus iHMI-Touch control with Manual Guide. Max. turning length: 1030 mm Max. turning diameter: 460 mm Chuck: 250 mm Nsdpo Aba D Hefx Abyedc Spindle bore: 81 mm Spindle: ASA A2-8 Max. spindle speed: 3500 rpm Motor: 18.5/22 kW 12-tool turret, BMT 55 Axis travels: -X: 265 mm -Z: 1100 mm -C: +-360° Live tooling Renishaw tool probe Tailstock Part catcher Included with the machine: - Chip conveyor with collection tank - High-pressure pump - Documentation - 4 live tooling holders (2 angular, 2 straight)

Condition: excellent (used), Year of construction: 2010, Converging Solutions Converging Conveyor Model: Integrator 3 Syncro Serial number: CS5653 Year of construction: 2010 230 V, 16 A Nsdjv Tx Uzjpfx Abysdc Belt width: 680 mm and (6x) 320 mm Clearance: 680 mm x 190 mm Total dimensions: 2280 mm x 850 mm x 1240 mm.

Condition: used, Year of construction: 2023, overall weight: 9,600 kg, DN SOLUTIONS PUMA TT2100SYYB (2023) – Twin Spindle / Twin Turret CNC Turning Center For sale: DN SOLUTIONS PUMA TT2100SYYB, manufactured in April 2023, equipped with twin spindles, twin turrets, dual Y-axis, driven tools, and an LNS automatic bar feeder. High-productivity CNC turning center designed for precision and high-volume manufacturing of complex components. Machine specifications Manufacturer: DN Solutions (Doosan) Model: PUMA TT2100SYYB Year of manufacture: 2023 (April) Serial number: ML0429-000147 Ndjdpfs Aa Abrsx Abyjc CNC control: DOOSAN-FANUC i Series Plus Maximum turning diameter: 230 mm Maximum turning length: 230 mm Main spindle chuck size: 10" Sub-spindle chuck size: 8" Main spindle bar capacity: 81 mm Sub-spindle bar capacity: 65 mm Main spindle speed: 3,500 rpm Main spindle power: 22 kW Sub-spindle speed: 5,000 rpm Sub-spindle power: 25 kW Turrets: 2 × 12 stations Live tooling: Both turrets Live tool speed: Up to 5,000 rpm Y-axis: Upper and lower turret Y-axis travel: ±50 mm C-axis: Both spindles Machine weight: 9,600 kg Additional equipment LNS Quick Load Servo 80 S2 automatic bar feeder Automatic machine doors (CNC Autodoor) External coolant pumping system 15 bar Chip conveyor Twin driven-tool turrets Main and sub-spindle configuration LNS Bar Feeder Model: Quick Load Servo 80 S2 Bar diameter range: 6–80 mm Maximum bar length: 1,605 mm - with spindle extender included in the price Servo-controlled automatic bar loading Automatic diameter adjustment Highlights Complete front and back machining in a single production cycle Simultaneous operations using two independent turrets Two Y-axes for complex milling and drilling operations Automatic bar-fed production Suitable for high-volume precision manufacturing Modern 2023 machine Machine location: Slovenia, European Union Price: On request Inspection: Available by appointment Additional information, photographs, and machine inspection are available upon request.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine. Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Nsdsxd Ubnspfx Abyjdc Note 🗒️ No printer.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – and enables color printing on glass, wood, textiles, plastics, metal, and many other materials. New model: PS1015 C M Y K LC LM + White Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing. Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg Nodpod Ew A Usfx Abyedc 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 70 mm printing height possible 7 x 500 ml ink can be supplied (additional cost) + VARNISH FUNCTION POSSIBLE Software settings and printer explanations available on request, throughout Germany/Europe (additional cost). Printing videos, etc. can be sent by email/WhatsApp.

Condition: used, Year of construction: 2022, machine/vehicle number: 01, General description The item for sale is an industrial laser marking machine by Solutions SK, model LM9 (designation FD060). The machine is from the 2022 production year and represents a complete solution for precise marking of parts, enclosed in a safe, free-standing housing. Technical data and specifications Manufacturer: Solutions SK Laser Machine model: Laser LM9 / LM9/B3 Designation / ID: FD060 Serial number: 01 Date of manufacture: 07.2022 (Code: 22-07-00) Ndedpfxjz R Eiuo Abysc Control interface: Industrial SIEMENS SIMATIC HMI TOUCH touchscreen panel Operating panel: Equipped with hardware buttons for START, RESET, STOP, a switch for working light (SVETLO), and a main emergency stop switch (NÚDZOVÉ ZASTAVENIE).

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Nedpfewp Ac Hex Abyodc Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: used, Year of construction: 2022, operating hours: 1,990 h, Doosan DN Solutions LEO 1600 Year 2022 Fanuc i Plus control system 6-inch (170mm) chuck Spindle bore 45mm Travels: Nsdpfx Aoz R S T Iebyodc X-175mm Z-330mm Max turning diameter 320mm Max turning length 303mm 12-tool turret MT4 tailstock Included with the machine: Chip conveyor with tank and pump Very good condition PDF specification file available

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Ndsdpfx Abeydqlqeyec Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. Njdpfxozd Uh Ie Abysdc 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Nsdpfxez D Ihfs Abyedc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. Nodpfozq Eg Ujx Abyjdc The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. The maximum printing format is 1150 x 990 mm.

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydraulic feed pressure device (HNDE), feed hopper Nodozhg Eyopfx Abyedc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, machine/vehicle number: FTR-124-1217, total length: 2,150 mm, total width: 2,205 mm, total height: 2,320 mm, overall weight: 3,750 kg, input voltage: 400 V, workpiece height (max.): 150 mm, input frequency: 50 Hz, power: 25 kW (33.99 HP), workpiece width (max.): 80 mm, workpiece length (max.): 80 mm, input current: 50 A, This Q-Fin F1200 XL VAC machine is located in the showroom in Bergeijk and has only been used for demonstrations. The machine has therefore only been used for a limited time and can still be viewed and tested in our showroom while it is running. Ndsdozzlqnjpfx Abyec The F1200 XL VAC is a powerful, all-round finishing machine for deburring, rounding, and finishing sheet metal parts up to 1200 mm wide. Thanks to the combination of multiple processing stations, various operations can be performed in a single pass. The machine is equipped with a vacuum system that securely fixes the workpieces to the conveyor belt during the finishing process. The first processing station consists of a grinding unit. This removes burrs and irregularities from the product surface and prepares the workpiece for the next operations. Subsequently, the sharp edges of the product are processed by oscillating cup brushes. The brushes process the contours and recesses of the workpiece from different directions, ensuring that the edges are rounded evenly. Depending on the brushes used, the machine can also be used for removing oxide scale and reducing surface roughness. The XL version has an additional second grinding unit. This allows an additional finishing operation to be performed after deburring and rounding. All processing stations can be easily controlled via the HMI touchscreen. Various settings can be saved in programs, so recurring products can be quickly reset, achieving high reproducibility. The automatically adjustable stations also reduce manual settings and minimize the risk of setting errors by the operator. The F1200 XL VAC is suitable for processing, among other materials, stainless steel, aluminum, and steel, and combines deburring, edge rounding, and finishing in one machine. In addition, the F1200 offers the possibility of integration with ERP and handling solutions, so that the machine can also be incorporated into a further automated production process.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 770 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, total height: 2,661 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,100 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, Equipment: chip conveyor, rotational speed infinitely variable, Vertical CNC machining center Control: FANUC F0MF+ Njdpfx Aszcpgwsbyedc Accessories: Chip conveyor, hinged belt type, manufactured by Cromar CNC AutoDoor

Condition: used, Year of construction: 2021, Technical details: Njdpey N R Hmofx Abyodc voltage: 400/50 V/Hz air-pressure connection: - bar control: - capacity: 150 kg/h protection class: IP 20 temperature range: 0 - 40 °C sound level:

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Nsdpfxjyffqqj Abysdc Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Year of construction: 2012, condition: excellent (used), easyFrame is a semi-automated solution for canvas framing, by Imaging Solutions AG. It can process to 50 frames per hour (depending on the operator). Machine is exellent state. It has frame mounts to produce stretchers from 8x6 to 43x43 inches canvases. Ndjdpjn Ut Hcsfx Abyec

Condition: like new (used), Year of construction: 2022, operating hours: 942 h, functionality: fully functional, turning length: 600 mm, turning diameter: 230 mm, spindle motor power: 22 W, spindle speed (min.): 50 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, rotational speed (min.): 50 rpm, bar passage: 65 mm, total height: 2,100 mm, total length: 5,000 mm, total width: 2,200 mm, overall weight: 8,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​8-axis CNC lathe "DN Solutions mod. PUMA TT1800SY" with motorized upper turret equipped with Y axis, motorized lower turret, opposing spindles and DN Solutions-Fanuc i-Plus iHMI CNC. Nodpfowuqp Ejx Abyodc

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: E-1579, total length: 3,000 mm, total height: 2,450 mm, overall weight: 5,400 kg, total width: 1,800 mm, rotational speed (max.): 900 rpm, THM TQZ1200 Shredder – Year 2017 THM TQZ1200 shredder for recycling and material processing applications. The machine performs the shredding process using rotating accelerating elements and is designed for integration into processing and recycling plants. Key technical features: Manufacturer: THM Recycling Solutions Model: TQZ1200 Year of manufacture: 2017 Machine number: E-1579 Main motor power: 90 kW Electrical supply: 400 V / 50 Hz Impact head speed: 900 rpm Internal diameter of the working chamber: 1,200 mm Ndsdpfjz Erxwsx Abyoc Height of the working chamber: 1,210 mm Accelerating elements: chains Approximate dimensions: 3,000 × 1,800 × 2,450 mm Approximate weight: 5,400 kg Working hydraulic pressure: approx. 130 bar Hydraulic tank capacity: approx. 100 l Robust industrial machine designed for integration into processing and recycling lines. Technical documentation available. For more information, photographs, or technical documentation, please contact us.