Used Espec Stress Test Chamber for sale (12,469)

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions: W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Rated current: 37 A Fuses: 250 V, 2 x 3 A Type: EHS-221MD Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Hsdjzfy N Topfx Abpep Temperature stability: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Espec We are offering an Espec (ThermoTec) stress test chamber. Overpressure and humidity tests at over 100 degrees Celsius in various modes. Program capacity for 10 samples with 30 steps per sample. A variety of safety mechanisms: overheating/overpressure protection, detection of water supply failure, complete door locking, and temperature sensor. Saturated temperature range: 105 to 142.9°C. Unsaturated temperature range: 105 to 132.9°C. Humidity range: 50 to 100% RH. Nominal pressure: 0.196 MPa at 132.9°C and 100% RH. External dimensions: Width 740 x Height 1553 x Depth 1000 mm. Hodpfx Ajzd Uy Dsbpep Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm. Other features: With rails and grid. Test item connections inside the chamber. Type: EHS-221M Scope of delivery: See images. 300 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Hodpjzh Huhofx Abpsp Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR This series includes automatically controlled chamber-type testing equipment of type A-TR. Hedpfx Aezh Ht Rebpep The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Hsdpfx Abezh Htwspop Including metal struts to increase the floor load capacity Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Hjdozh D S Repfx Abpjp Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber, explosion-proof) INERTIZATION WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 liters Cold/Heat operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98 % RH Temperature change per unit of time: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse (on customer's side): 32 A, slow-blow Permissible weight of test specimens: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (Evaporator of the air conditioning system has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Hjdjzh D Ryspfx Abpsp Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SWT 200/400 Weiss spray and splash water test cabinet This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Features Glass door with wiper Pneumatic drive of the swivel nozzle Hedezh D Rmepfx Abpjp Adjustable swivel angle Replaceable swivel nozzles Nozzle holder swivels and is replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for the test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection class tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Hsdpfx Abszh D N Aepjp Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without... approx. 1820 mm, with... approx. 1850 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the unit: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values Hjdpjzh D E Rjfx Abpsp - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Hedpfx Abjzhadcepop Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Hodpfx Ajzg U Tijbpop Operating manual available Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate test chamber Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Time-related temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Hedozg Tx Rspfx Abpsp Temperature range: +10 to +95°C Time-related temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Time-related humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions by telephone.

Condition: good (used), Vötsch Hjdpfx Aezg Twgobpjp Type: VCS 7034-5 Water-cooled climatic test chamber Vötsch VCS 7034-5 Test chamber capacity 335 liters Performance for temperature tests Temperature range -70 to +180°C Temperature deviation temporal K ±0.1 to ±0.5 Spatial temperature deviation K ±0.5 to ±2.0 Temperature gradient 1 to 4 Rate of change : Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20 °C 3000 W / at -20°C 3000 W Temperature calibration values +23 °C and +80 °C Performance for climate tests Temperature range +10 to +95°C Temperature deviation in time ±0.1 to ±0.3 K Spatial temperature deviation ±0.5 to ±1.0 K Temperature gradient 1 to 2 K Humidity range 10 to 98% Humidity deviation in time ±1 to ±3% Dew point range -3 to +94°C Heat compensation 400W Climate calibration values +23 °C / 50 % r.h. and +95 °C / 50 % r.h. Test chamber dimensions: Width 580mm Depth 765mm Height 750mm External dimensions: Width 870mm Depth 1595mm Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10kW Rated current: 21 A Sound pressure level: 64dB(A) Cooling water consumption: 1.4m³/h Refrigerant: R-404A / R-23 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature testing chamber, water-cooled Performance data: With a temperature change rate of 25 K/min Test chamber dimensions: height 750 mm, width 580 mm, depth 615 mm External dimensions: height 1775 mm, width 780 mm, depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation (over time): ± 0.1 to ± 0.5 Temperature homogeneity (spatial): ± 0.5 to ± 2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Hodpfxezg Eyge Abpop Test volume: 270 liters 2x side ports, diameter 125 cm 1x side port, diameter 50 cm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Hsdszg Er Aepfx Abpop Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: excellent (used), ESPEC PL-2KPH Climate Test Chamber Manufacturer: ESPEC CORP. Type: PL-2KPH Machine Type: Temperature and Climate Test Chamber Test Chamber Volume: 225 l For sale is a used ESPEC climate test chamber, type PL-2KPH. The unit is suitable for temperature and climate tests, environmental simulations, material and electronics testing, as well as applications in research, development, and quality assurance. Technical Data Temperature Range: -40 °C to +180 °C Humidity Range: approx. 10 to 98 % RH Humidity Fluctuation: ±2.5 % RH over time / ±3.0 % RH Heating Rate: approx. 3.5 K/min Cooling Rate: approx. 1.1 K/min Internal Dimensions (W × H × D): 500 × 750 × 600 mm External Dimensions (W × H × D): 910 × 1,590 × 973 mm Power Supply: 400 V AC / 3~ / 50 Hz Connection: CEE 16 A Max. Current Consumption: 11 A Refrigerant: R404A Weight: approx. 300 kg Equipment Programmable Microprocessor Control Control Panel Timer Function Error Code Display Audible and Visual Alarm Over-temperature Protection Test Specimen Protection Test Chamber Lighting Operating Hour Counter Hjdpfxjzg D Rqo Abpsp Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Battery Testing Quality Assurance Research and Development Condition Used Visual condition as shown in the pictures. Scope of Delivery ESPEC PL-2KPH Climate Test Chamber Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch VC³ 0034 Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC³ 0034 Machine Type: Climate Test Chamber / Climate Chamber Test Chamber Volume: approx. 335 liters For sale is a used climate test chamber from Vötsch for temperature and climate testing in laboratories, research, development, and quality assurance. Technical Data Test Chamber Dimensions: approx. 580 x 765 x 750 mm (W x D x H) Housing Dimensions: approx. 875 x 1860 x 1805 mm (W x D x H) Temperature Range: -10 °C to +90 °C Humidity Range: 10 to 98 % RH Dew Point Range: +4 °C to +89.5 °C Temperature Homogeneity: ±0.5 to ±1 K Temperature Deviation: ±0.1 to ±0.5 K Heating Rate: approx. 1 K/min Cooling Rate: approx. 0.3 K/min Max. Heat Compensation: approx. 200 W Refrigerant: R404A Filling Quantity: 0.6 kg ND max.: 25 bar g HD max.: 25 bar g Power Connection: 230 V / 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Protection Class: IP54 Weight: approx. 490 kg Equipment SIMPAC control system Temperature and humidity control Stainless steel test chamber Ethernet, USB, RS232, RS485/422 Test item protection function Cable glands Application Areas Climate testing Temperature testing Material testing Electronics testing Quality assurance Research and development Scope of Supply Vötsch VC³ 0034 Climate Test Chamber Accessories as shown in the pictures Condition Hsdezgb Awopfx Abpjp Used Optical condition as shown in the pictures For the safety of our customers, the offered climate chambers are tested before delivery, if necessary, filled with legally compliant refrigerant, subjected to a leak test, and delivered with a documented test run. Subject to change and errors in technical data as well as prior sale.

Condition: excellent (used), RS Simulators Type: ST2K320/45 K Shock test system, water-cooled Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with an empty test chamber Humidity levels in the upper test chamber Climate temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (± 2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Total power: 13 kVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Hsdpfezgbutsx Abpjp Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), RS Simulators Type: ST2K320/45 Water-cooled shock testing system Operating climate range Temperatures in the upper test chamber Temperature range: +40 °C to +180 °C Temperatures in the lower test chamber Temperature range: -40 °C to +100 °C Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 1100 mm, Height 2300 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical power supply: Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 850 kg For your safety as a buyer, please note the following information: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) Hedpfx Ajzgbumobpjp (Changes and errors in the technical data and specifications are reserved!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Primus Engineering Type: DST 350 This testing equipment was designed for performing IP protection class tests for "dust" according to, for example, DIN 40050 Part 9 and DIN EN 60529. The testing equipment is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Predefined test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 kW Connection voltage: 400V/50Hz 3-N/PE (16A CEE socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Hedpfezgbtiex Abpjp Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« Hsdpfxezga Hue Abpsp On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here we offer a Weiss climate testing chamber. Weiss climate testing chamber, water-cooled (Refrigerant converted to R-452A) Temperature testing Volume 335 liters Test chamber dimensions: Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature -42°C Maximum temperature +180°C Temperature change rate, cooling 4 K/min Temperature change rate, heating 3.2 K/min Temperature deviation, time-based ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K Climate testing: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time-based ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, time-based ± 1 to ± 3 % RH Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 4.1 kW Rated current: 14 A Hedpfxszgavvj Abpsp Refrigerant: R-452A Type: WK3-340/40 Weight Approx. 515 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), We are offering a Weiss climate testing chamber. Water-cooled. Test chamber lighting: halogen bulb 24V, 50W. Data for temperature tests: Temperature range: -40°C to +180°C. Temperature deviation over time in the center of the usable space: ± 0.3 to ± 0.8 K. Temperature deviation spatially: ± 0.5 to ± 2 K. Temperature change rate: Heating: 10 K/min. Cooling: 12.5 K/min. Heat compensation at +20°C: 8000 W. Heat compensation at -20°C: 3000 W. Data for climate tests: Temperature range: +10°C to +95°C. Humidity range: 10 to 98 % RH. Temperature deviation over time in the center of the usable space: ± 0.2 to ± 0.5 K. Temperature deviation spatially: ± 0.5 to ± 1 K. Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH. Test chamber dimensions: height 950 mm, width 760 mm, depth 650 mm. External dimensions: height 2025 mm, width 1090 mm, depth 2480 mm. Rated voltage: 3/N/PE AC 400 V ± 10% 50 Hz. Rated current: 24 A. Rated power: 16.0 kW. Refrigerant: R452A. Weight: approx. 900 kg. Type: WK-480/40/10. For your security as a buyer, please note the following: Hjdpfxezgaipj Abpjp The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components. 2. If necessary, new filling with legally compliant refrigerant. 3. Leak test with certificate. 4. After successful inspection, the chambers undergo a documented test run. Condition: used. Scope of delivery: (See image). (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Hodpfx Ajzf Hi Hsbpop Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.