Used Espec Ehs-221Md for sale (222)

Condition: excellent (used), Espec Here we offer an Espec (ThermoTec) stress test chamber. External dimensions: W x H x D: 860 x 1795 x 1000 mm Test chamber dimensions: W x H x D: 355 x 355 x 426 mm 2 x 46 liters Voltage: 230 V 1/N 50 Hz Nledozfy N Topfx Aiyoc Rated current: 37 A Fuses: 250 V, 2 x 3 A Type: EHS-221MD Temperature range: +105°C to +142.9°C Humidity range: 75 to 100% RH Temperature stability: -+ 0.5 °C Pressure range: 0 to 2.0 kg/cm² Heating/pressure build-up time: from 0 to 2.0 kg/cm² in approximately 60 minutes 390 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), Espec Njdezd Uy Depfx Aiyslc We are offering an Espec (ThermoTec) stress test chamber. Overpressure and humidity tests at over 100 degrees Celsius in various modes. Program capacity for 10 samples with 30 steps per sample. A variety of safety mechanisms: overheating/overpressure protection, detection of water supply failure, complete door locking, and temperature sensor. Saturated temperature range: 105 to 142.9°C. Unsaturated temperature range: 105 to 132.9°C. Humidity range: 50 to 100% RH. Nominal pressure: 0.196 MPa at 132.9°C and 100% RH. External dimensions: Width 740 x Height 1553 x Depth 1000 mm. Test chamber dimensions: Width 355 x Height 355 x Depth 426 mm. Other features: With rails and grid. Test item connections inside the chamber. Type: EHS-221M Scope of delivery: See images. 300 kg Condition: Used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Type: EGN28-6CWL Espec, water-cooled Temperature test chamber, N series Power supply: AC 400 V, 3-phase, 50/60 Hz, 38 A Temperature range: -70 to +180 °C Temperature change rate: Heating: 10 °K/min Cooling: 5.5 °K/min Internal dimensions (W x H x D) in mm: 1000 x 1000 x 800 External dimensions (W x H x D) in mm: 1205 x 1920 x 2159 Usable volume: 800 liters Refrigerant: R-404A Refrigerant: R-508A Weight: approx. 695 kg Nljdezg Tynopfx Aiysc For your safety as a buyer, please note the following: The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), Espec Type: TSD-100 100-liter useful volume for larger test specimens up to 30 kg. Complies with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Over-temperature protection Operating hour counter Mobile version 2 test specimen baskets made of stainless steel Cable gland Ø 100 mm Refrigerant: R404A 1 kg R23 Voltage supply: 400V 3Ph 50Hz Max. power consumption: 32A Condition: used Nodpfxjzg Tn Sj Aiyolc Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), ESPEC PL-2KPH Climate Test Chamber Manufacturer: ESPEC CORP. Type: PL-2KPH Machine Type: Temperature and Climate Test Chamber Test Chamber Volume: 225 l For sale is a used ESPEC climate test chamber, type PL-2KPH. The unit is suitable for temperature and climate tests, environmental simulations, material and electronics testing, as well as applications in research, development, and quality assurance. Technical Data Temperature Range: -40 °C to +180 °C Humidity Range: approx. 10 to 98 % RH Humidity Fluctuation: ±2.5 % RH over time / ±3.0 % RH Heating Rate: approx. 3.5 K/min Cooling Rate: approx. 1.1 K/min Internal Dimensions (W × H × D): 500 × 750 × 600 mm External Dimensions (W × H × D): 910 × 1,590 × 973 mm Power Supply: 400 V AC / 3~ / 50 Hz Connection: CEE 16 A Max. Current Consumption: 11 A Refrigerant: R404A Weight: approx. 300 kg Nledpozg D Rqsfx Aiysc Equipment Programmable Microprocessor Control Control Panel Timer Function Error Code Display Audible and Visual Alarm Over-temperature Protection Test Specimen Protection Test Chamber Lighting Operating Hour Counter Application Areas Temperature Testing Climate Testing Environmental Simulation Material Testing Electronics Testing Automotive Battery Testing Quality Assurance Research and Development Condition Used Visual condition as shown in the pictures. Scope of Delivery ESPEC PL-2KPH Climate Test Chamber Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), Espec Type: PHP - J3 Technical Data: Air-cooled Temperature and humidity range: Ambient temperature +10°C to +100°C / 40 to 98% relative humidity Temperature fluctuation: ±0.3 K Nlsdpezgtahsfx Aiyjc Humidity fluctuation: ±2.5% Internal volume: 398 liters Dimensions: Internal dimensions: Width 600 mm x Height 830 mm x Depth 800 mm External dimensions: Width 1010 mm x Height 1690 mm x Depth 1273 mm Mains voltage: 400 VAC 3-phase 50 Hz Maximum current: 400 VAC 8.3 A Weight: 335 kg Scope of delivery: Espec climate test chamber For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Here, we offer a temperature shock test chamber with a 100-liter usable volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range, warm chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrost Over-temperature protection Operating hour counter Mobile design 2 test specimen baskets made of stainless steel Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3-phase 50Hz Max. power consumption: 32A Type: TSD-100 Condition: used Nljdpfxszfg Upj Aiysc Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: good (used), ESPEC Climate Testing Chamber PL-3KPH Manufacturer: ESPEC Corp. Type: PL-3KPH Design: Air-cooled temperature and climate testing chamber For sale is a used ESPEC climate testing chamber for temperature and climate testing in research, development, quality assurance, and industry. Technical data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20 % to 98 % RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. power consumption: approx. 11 A Weight: approx. 350 kg Cooling: air-cooled No external water connection required Refrigerant according to label: R452A – approx. 1.2 kg Features: Touchscreen control Programmed and constant operation Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / Chamber Lamp Side cable/pipe passage Ø approx. 100 mm Overheat protection Hour counter integrated RS-232C interface Water tank system Specimen Power Supply Control Time Signal connection Condition: Used unit with signs of age and wear. Some rust and corrosion spots are present in the lower housing area. Interior with signs of use. Optical condition, see pictures. Scope of delivery: ESPEC Climate Testing Chamber PL-3KPH Shelf included Scope of delivery as shown in the pictures Service: Functional check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale Important note: All information has been provided to the best of our knowledge based on the pictures, nameplates and manufacturer information. Shipping possible. Nlodpey N Awqjfx Aiyec Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Njdpfx Aioy H H Iusyjlc Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: used, Year of construction: 2005, functionality: limited functionality, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ESX-2CA, Air cooled, Although this model has humidity function, This has been disabled & is now only a temperature only, -70C to +150C, Cooling rate 4.0C per min. Internal dimensions (W,D,H) 500mm, 600mm, 750mm. Comes with calibration. Nljdpfowy Uq Rex Aiysc

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration. Nodpfx Aijwy Uqwsyelc

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Nljdpfx Aiexugq Asyoc Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Espec Type: TPC-212D Technical Specifications Test Procedure: HAST – Highly Accelerated Stress Test Model: Espec TPC-212D Internal Volume: 2x (approx. 22 liters) Internal Dimensions (ø x L mm): 2x 295 x 330 mm Temperature Range: +105 °C to +142.9 °C Humidity Range: 75% to 100% RH Nlsdpfx Ajwl D Aaeiysc Pressure Range: 0.02 to 0.196 MPa gauge (0 to 28 psig) Power Supply: 220 V (±5%), 1-Phase, 50/60 Hz, 20 A Special Features: Two chambers in one device Notes: Two chambers: Allow for simultaneous tests with different parameters or larger test volumes. HAST test: Accelerated endurance test under high temperature and humidity with overpressure for the qualification of electronic components. Applications: Ideal for semiconductors, ICs, circuit boards, MEMS, etc. Weight: 230 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions over the phone.

Condition: excellent (used), Espec Type: TSA-202E-W Temperature Shock Chamber, Water-Cooled Cold Chamber: -55°C to 0°C Hot Chamber: +50°C to 200°C System: Two-zone test with damper control Temperature fluctuation ±0.5°C Hot Chamber: Temperature heating time: Ambient temperature (20°C) to +200°C within 15 minutes. Cold Chamber: Temperature reduction time: Ambient temperature (20°C) (20°C) to -55°C within 35 minutes. Temperature recovery: within 5 minutes. Internal dimensions (W x H x D mm): 650 x 460 x 670 External dimensions (W x H x D mm): 1550 x 1900 x 1670 Approx. 200 liters Power supply: 400 V AC 50Hz: 65 A Nlsdpfx Aiewc R A Ieyoc Refrigerant: R404A 5 kg R23 2.0 kg Weight: Approx. 1200 kg For your safety as a buyer, please note the following: The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, Air-Cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependence on temperature range and humidity fluctuations: ± 2.5% RH over time, ± 3.0% RH Internal dimensions (WxHxD): 500 × 750 × 600 mm External dimensions (WxHxD): 910 × 1590 × 973 mm Microprocessor control with 10 pre-set international test standards and 20 freely programmable memory slots, as well as built-in timer with programmable start/stop automation and error code display. Programming via touch screen. Alarm display (audible and visual). Device protection against overtemperature: Overtemperature protection with two switching contacts Illumination of testing chamber Operating hours counter Test chamber volume: 225 liters Net weight: 300 kg Electrical connection: 400 V 3/N 50 Hz, Nledpfex Iu I Ssx Aiysc Plug: CEE 16 A, max. current: 11.0 A Refrigerant: R404A Scope of delivery: Espec climate test chamber Buyer information for your security: The following procedures are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, please feel free to contact us by phone.

Condition: used, Grinding wheel puller, cup wheel puller, double grinder stand puller, surface grinder puller, cylindrical grinder puller, puller head, dressing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Njdeqqpi Iopfx Aiyolc -Manufacturer: EHS, grinding wheel dresser, grinding wheel puller -Tip height: 173 to 238 mm -Dimensions: 185/180/H180 mm -Weight: 5.7 kg

Condition: used, New: No Nedswuy Abopfx Aiyolc Part suitable for: trucks VAT/margin scheme: VAT deductible Type number: 2022876/2347769

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 belt sanding machine with combination unit with electronic segmented pressure bar for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating of workpiece carrier plates Sanding of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding of barrier films with graphic operator terminal CNC-controlled thickness adjustment from 3-150 mm Activation of the calibrating roller via the terminal with patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width 1100 mm Nsdpfjyulfmjx Aiyolc Sanding belt length 2150 mm Sanding belt speed, frequency-controlled, approx. 2-18 m/sec Drive, sanding unit: 15 kW Feed rate: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min with belt extraction: 490 l/min Extraction nozzle: 180 mm Air requirement, sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840x1670x2200 mm The machine will be fitted with a new feed belt. Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1998, Used machine Year of manufacture: 1998 1 wide belt sander with combination unit Equipped with electronic segmented pressure bar For sanding of soft and hard veneers Calibration and fine sanding of solid wood Nodjx Rpghopfx Aiyslc Calibration of workpiece carrier boards Removal of defective veneers and coatings Intermediate sanding of PU, hydro, UV, nitrocellulose, and polyester coatings Sanding of blocking foils With graphical operator terminal NC-controlled thickness adjustment ranging from 3 to 150 mm Calibration roller can be engaged via terminal With patented CSD segmented pressure bar for compensation of workpiece tolerances up to 2 mm Sanding width: 1350 mm Sanding belt length: 2150 mm Sanding belt speed, frequency controlled, approx. 2–18 m/s Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air consumption: 15 NL/min Belt blow-off: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/s Total power connection: approx. 17 kW Weight: approx. 2500 kg Dimensions (W x D x H): 2090 x 1670 x 2020 mm Machine will be supplied with a new feed belt Availability: by arrangement Location: Röllbach

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, working width: 4,050 mm, sheet thickness (max.): 8 mm, TECHNICAL DETAILS Sheet metal width: 4,050 mm Sheet metal thickness: 8 mm Nedpfxezapq Dj Aiyelc Control: conventional

Condition: good (used), functionality: fully functional, Year of construction: 1996, Sheet width: 3050 mm Sheet thickness: 10 mm Control: Elgo 87 P2 Blade strokes: 11 - 31 strokes/min Cutting angle adjustment: 1 - 4° Number of hold-downs: 16 pcs Pressure per hold-down: 900 kg Main motor power: 11 kW Table width: 700 mm Table height: 800 mm Dimensions (LxWxH): 4000 x 2220 x 1830 mm Weight: 6300 kg Accessories/Equipment: Nljdpfx Asy H Inpsiyjc – digital length stop 10–1000 mm – upper and lower blade, two-piece, each 1550 mm – 1 set of spare blades – including low cart at the discharge side

Condition: good (used), Hydraulic punching machine, type EHS, HE - Punching force approximately 12t (EHS-120) to approximately 20t (HE-20) - Power approximately 2.2kW / 3kW - Stroke approximately 100 mm - 2-hand safety control, alternatively foot switch Other hydraulic and pneumatic punching machines in stock. Nledpfx Aijd A Tp Tjysc Do you need the right punching tool? - Let us know. We will gladly provide you with a suitable offer.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, drawing speed: 10,000 mm/s, inner diameter: 600 mm, load capacity: 3,000 kg, wire diameter (max.): 14 mm, Year of manufacture 1999 Maximum speed 10 m/s Total installed power 230 kW Key status Complete electrical modernization TEUREMA EHS-110 wire drawing line, a heavy-duty industrial machine equipped with a Tecno Impianti drawing bench and designed for reliable production performance. The line has undergone a complete electrical modernization, including a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, 100% new wiring and new push-button stations, significantly improving reliability, maintenance and overall operation. Line configuration Pay-off stands 2 tilting pay-off units. Maximum coil weight per unit: 3,000 kg. Vertical pay-off tower 6-meter tower with lifting and lowering carriage operated by hoist. Descaler Mechanical descaler. Lubrication box 1.5 kW motor at 1,500 rpm. TECNO IMPIANTI drawing bench 2 passes. Double-ring capstan: Ø 610 mm and Ø 760 mm. 3-speed gearbox: 3.90 / 7.20 / 10.00 m/s. Power: 160 kW. Frequency: 50 Hz. Horizontal coiler Horizontal drive. Maximum coil weight: 3,000 kg. 2-speed gearbox: 7.3 / 10.0 m/s. Maximum coil diameter: Ø 1,200 mm. Core diameter: Ø 600 mm. Useful spool width: 900 mm. Power: 45 kW. Technical data • Incoming wire diameter: 5.5 to 14 mm • Outgoing wire diameter: 4 to 12 mm • Number of blocks: 1 vertical • Maximum line speed: 10 m/s • 2 x CL30 A 33 Eurolls cassettes • Rollers: Ø 150 x Ø 90 x 15/20 mm • Total machine power: 230 kW • Frequency: 50/60 Hz Electrical and automation upgrade • Completely new main electrical cabinet • Siemens S7-1500 PLC • Siemens HMI 1200 • 100% new wiring • New push-button stations This line combines the strength of a proven industrial machine with a complete upgrade of its electrical and control systems, making maintenance easier, improving reliability and simplifying integration into modern production environments. Available services • Installation • Assembly • Commissioning Nlsdpfx Aiey Ex Ecoyoc • Technical assistance TEUREMA EHS-110 wire drawing line, manufactured in 1999, equipped with a Tecno Impianti drawing bench and capable of operating at speeds of up to 10 m/s. The machine features a complete electrical modernization with a new main electrical cabinet, Siemens S7-1500 PLC, Siemens HMI 1200, completely new wiring and new push-button stations, offering a robust, reliable and production-ready industrial solution.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, pressure: 3 bar, total width: 750 mm, total length: 2,500 mm, total height: 1,500 mm, overall weight: 120 kg, empty load weight: 75 kg, type of input current: three-phase, 3 Alfa Laval LKH-25 Sets | 7.5 kW Pump + E+H (Promag) Flowmeter + Strainer We offer for sale three (3) professional processing units manufactured in 2020. Each set consists of a high-quality centrifugal pump and a precise measuring and filtration system, mounted on an acid-resistant stainless steel pipeline. Set Specifications: Alfa Laval LKH-25 Centrifugal Pump: - Motor power: 7.5 kW - Capacity: 35.0 m³/h (at 3.0 bar pressure) - Construction: Hygienic stainless steel housing - Mounting: The pump is fitted with its own adjustable support legs for stable, free-standing floor installation and easy leveling. Measuring Equipment (Endress+Hauser): - Each set is equipped with an integrated electromagnetic flowmeter (models Promag P, F, or 300) installed on the pipeline. These are high-precision devices with LCD displays, suitable for operation at temperatures up to 150°C. Filtration and Fittings: - Mesh strainer: Installed on the acid-resistant stainless steel pipeline (visible in the measuring set pictures) - Standard: Hygienic, acid-resistant, fully CIP-compatible Condition and Dimensions: - Year of manufacture: 2020 - Pump weight: approx. 73 kg Njdoy Nkczopfx Aiyolc - Technical condition: Very good, the units have been operated in a clean production environment and regularly serviced. Application: Ideal for the food, brewing, and chemical industries where hygienic transfer of media with simultaneous precise liquid quantity measurement is required.

Condition: good (used), Broaching / Draw Keyseating Machine KARL KLINK RSI 2.5 EH - Year of manufacture: 1965 - Pulling force: 2500 kg / (25 kN) - Broaching speed: 1 mm/min to 9 mm/min (stepless adjustment) - Max. stroke: 800 mm - Max. workpiece diameter: approx. 250 mm - Motor: approx. 3 kW - Coolant system - Pulling force display - Pulling force limiter - Various guide bushings (see pictures) - Machine feet Dimensions (LxWxH): 1.1 x 0.7 x 2 meters / Weight: 1600 kg Njdpfx Aeymz N Eeiyolc Errors and omissions excepted.