Used Ercolina Medibender Mb 42T for sale (3,146)

Condition: new, Year of construction: 2026, neu 2026 090209 prompt, Zwischenverkauf v Italien 7780 € 150.15 € 1 1 42 mm 400 mm 570 mm 1000 mm 80 kg 4 cm³ 42 x 3 mm 48 x 1,5 mm 42 x 4 mm 42 x 2 mm Dsdowirzfspfx Aa Hjcl 42 x 2 mm 50 x 3 mm 54 x 2 mm 54 x 2 mm 60 x 2 mm 50 x 4 mm 30 mm 40x20 (liegend), 40x12 (s mm 260 mm 10 mm 3,3 U/min 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min)

Condition: new, tube diameter 42.0 mm Stahl wall strength 3.0 mm Stahl tube diameter 54.0 mm CU/Alu bar material - diameter 30.0 mm wall strength 2.0 mm Dcsdjxaa Sdopfx Aa Hol revolutions per minute 2.0 U/min voltage 230 Volt total power requirement 1.1 kW weight 80.0 kg range L-W-H 410 x 1000 x 570 mm ERCOLINA MediBender "MB 42 M" - Capacity steel pipe 42 x 3.0mm - Capacity gas pipe 1“1/4 gas x 3.5 mm - Capacity square profile (FE 42) 35 x 35 x 3 mm - Max. bending radius 10-260 mm - Minimum radius 2 x D - 6-edge tool holder - Min. outside diameter 5 mm - 1/8“ gas Equipment: - patented fast tool change system - one bending speed - freely movable foot switch - bending tools on request for an additional charge including ERCOLINA microprocessor control: - with 30 programs each program with up to 9 bending angles programmable - in addition, the necessary correction angles can be entered . for each bending angle in the working mode BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: new, tube diameter 33,7 x 3,4 GAS mm tube diameter 35,0 x 2,5 STAHL mm tube diameter 35,0 x 1,5 EDELST mm bending radius min. R10 - R 190 mm bending angle max. 0 - 180 ° tool taper 6-kant 40 mm voltage 230 V total power requirement 0,9 kW weight of the machine ca. 23,0 kg Description: - MediBender "070" digital - with maximum bending performance for 35 x 2.5 mm steel tubes Dcedpsxab E Ssfx Aa Hol - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE

Condition: ready for operation (used), Year of construction: 2009, ERCOLINA MB 42 / Mandrel-less pipe bending machine -CE marking -Year of manufacture: 2009 -Bending capacity / steel pipe: 42.4 x 3 mm -Max. pipe diameter, aluminum / copper: 54 x 2 mm -Bending capacity, furniture construction pipe: 48 x 1.5 mm -Solid material up to 30 mm -Max. bending angle: 210 degrees -Electronic control with digital display -Max. 30 program memory slots -Programs with 9 bending operations -Overload protection / Yes -Operation: Dual foot pedal (bending - return) -Max. bending speed: 2 bends/min Dedpoznm Nfofx Aa Hjcl -Includes 1 tool -1.1 kW -Foot switch -Documentation Dimensions: L x W x H 0.5 x 0.6 x 1.2 meters / Weight 100 kg Errors and omissions excepted.

Condition: new, neu ca. 4 Wochen ab Auftragse Italien 3620 € 38 mm 245 mm 300 mm 320 mm 23 kg 19 cm³ 38 x 1,5 mm 38 x 1,5 mm 35 x 3 mm 30 x 2 mm 35 x 1,5 mm 42 x 1,5 mm 42 x 1,5 mm 50 x 2 mm 50 x 2 mm 50 x 4 mm 20 mm 10 x 25 mm 25 x 20 (stehend), 25 x 1 mm 180 mm 36 mm Dcsdpfjwiqxiex Aa Hjl 10 mm 2,8 U/min 0.9 kW digital adjustment of the bending angle from 0 - 180 ° single phase motor 220V / 900W electric engine brake indicator light for indicating overload basement made of cast iron, suitable for mounting a tripod (tripod not included) 90° bend in 6 seconds foot pedal without tools OPTIONAL EQUIPMENT: tripod € 330,-

Condition: new, R10-R260 210 ° bending speed 2 U/min 1 1/4" x 3,5 mm einphasig - 230 V drive motor 1,1 kW < 70 dB weight of the machine ca. 80 kg dimensions of the machine ca. 410 x 1000 x 570 mm Accessories / equipment: Hard copper and aluminum: 54x2 mm Steel tube: 42x3 mm Stainless steel: 42x2.5 mm Solid material: 30 mm Number of programs: 30 each 9 bends Control: Soft-touch control panel in 8 different languages Mobile by driving device The controller allows easy programming of the automatic cycle The controller is equipped with a system diagnostics and has a great language selection. Patented fast tool change system A single bending speed Dcedpfxjyv I Tke Aa Hjl

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm 0 - 180 ° 2" (60.,3mm) mm stufenlos 0,5 - 2,0 1,5 kW 700 kg Djdpfeivqrbjx Aa Hscl - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Dsdpoxaac Ajfx Aa Hecl Furnishing : - 1 control (integrated) - 1 wired remote control

Condition: new, tube diameter 60.3 x 4.5 mm ST tube diameter 60.3 x 5.4 mm ALU tube diameter 2" x 3.91 mm GAS bar material - diameter 35.0 mm Dcedox Urtljpfx Aa Hjl revolutions per minute 2.0 U/min bending radius min. 10.0 mm bending radius max. 270 mm external diameter min. 5.0 mm external diameter min. 1/8 Zoll voltage 230 V total power requirement 1.5 kW weight 76.0 kg range L-W-H 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model "M" = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. Dcedpfoxaatnex Aa Hjl - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. Dcodpfx Aoxaafqea Hsl - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 500 mm table load 300 horizontal kg table load 150 vertikal kg Dcsdpfxsxabl Sj Aa Hsl swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.5 U/min bore 90.0 mm table height ~ 650 mm mm motor 230 Volt weight of the machine ca. 90.0 kg. range L-W-H 385 x 340 x 375 mm Features: - The table can be tilted and locked at angles ranging from 0° to 90° - Manual tilting - Start/stop via a foot switch that can be used from any location - Selectable rotation direction: clockwise/counterclockwise - Rotation time adjustable - Welding machine controlled via control unit - 350-amp ground connection Scope of Delivery: - Control unit (integrated) - Foot switch THE ROTARY TABLE HOUSING MUST BE CONNECTED DIRECTLY TO THE BUILDING GROUND! CAUTION!! Vertical load limit: 150 kg only

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. swivelling range 0 - 90.0 Grad turning speeds 0.6 - 6.0 U/min bore 60.0 mm motor 230 Volt weight of the machine ca. 56.0 kg range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding Djdpfx Aexabm Noa Hecl - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) - Speed display

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  - Capacity: 250 liters per batch - Application: Brewing - Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) - Heating system: Electric - Temperature control: Automatic - Safety system: Thermal safety alarm - Cooling: Plate heat exchanger - Electrical supply: 400 V, three-phase - Installed power: 15 kW Scope of Delivery  - Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control - Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C Dcedpjyw Abfsfx Aa Hol - Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  - Brewhouse capacity: 500 L - Configuration: 3 kettles + hot water tank + cold water tank + boiler - Steam heated - Cooling capacity: 35.8 kW Dcjdpjyg R Dljfx Aa Hjl Scope of Delivery  - Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler - Steam Generator | GG-Technik | TD9 | 2016 | 5 kW - Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 - Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill - Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW - Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel - Compressor | CompAir | WinVOM L15 7.5 | 2001 | — - Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel - Air Dryer | — | E2000 | 2001 | Air drying unit

Condition: good (used), Technical specifications for the pallet racking system: Racking system: Lücht & Palm Type: MB Note: Due to the hot-dip galvanized surface, the racks are suitable for outdoor use. The scope of delivery includes: 16x pallet racking uprights, used Dodsult Szopfx Aa Hscl Material color: hot-dip galvanized Frame profile dimensions: U 120 x 50 x 5 mm Includes cross and diagonal braces, Base plates The uprights are pre-assembled (welded framework) 4,000 mm high 900 mm deep 52x pallet racking beams, used Material color: hot-dip galvanized Profile: IPE 120 x 64 mm Clear span: 5,015 mm Maximum load per pair of beams: 1,500 kg, with evenly distributed load 16x racking connectors, used Material color: hot-dip galvanized Profile: L 40 x 40 x 4 mm Clear span: 200 mm 64x bolt anchors, new Manufacturer: Hilti Type: HST2RM12x105/10 Design: Stainless steel 32x leveling plates, used Design: galvanized For leveling the racking uprights that are installed on uneven ground 01x load sign With information on bay and shelf loads, Manufacturer and order number Dimensions: 420 x 297 x 3 mm Including mounting hardware Your contact persons in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: new, We offer you a new pallet racking crossbar for sale here. Thanks to the hot-dip galvanized surface, these crossbars are suitable for outdoor use. Technical data for the pallet racking crossbar: Racking system: Lücht & Palm Type: MB Included in the scope of delivery: 01x Pallet racking crossbar, new Material color: hot-dip galvanized IPE profile: 120 x 60 mm Design: Head crossbar Agraffe: 2 HK (hooks) Clear width: 1,800 mm Maximum load per pair of crossbars: 3,600 kg, with evenly distributed load 1x Set Dedpjhg Tkkofx Aa Hjcl HV fitting set EN14399-4 - EN14399-6 10.9 hexagon head bolt with nut and washer for HV connection Material color: hot-dip galvanized These crossbars have an upstand for the placement of shelf grids, which is welded on. (Height: 40 mm / Material thickness: 4 mm)

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel Djdswvrazepfx Aa Hocl - CE marking

Condition: used, Year of construction: 2014, Equipment: - Brush grinding machine with rotating grinding brush belt - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are Dcjdpfjxrb Rfsx Aa Hol inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Dodpjw Hx Tvefx Aa Hscl Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Bending speed 10 rpm.

Condition: excellent (used), GRANULATE DUST REMOVAL We have 5 units available from a company liquidation. Djdpfx Aajy N R Nbj Hocl Granulate dust removal machines reliably eliminate quality risks such as streaks and cloud formation on visible surfaces. The granulate dust remover efficiently removes fine dust and ensures clean, high-quality plastic granulate. This reduces rejects, prevents production disruptions, and ensures consistently high product quality. Ideally, I would prefer if you already had such a device in use, as I only deal with the elimination of injection molding defects and am not familiar with the machines themselves.

Condition: new, Number of sanding units 8 St. sanding width 25-240 mm Sanding height max. 15-140 mm B ROBA Fentech; Fully automatic sanding machine Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine sanding of wood - Sanding after impregnation - Intermediate lacquer sanding Dedpjzqvn Aefx Aa Hecl Advantages of the ROBA Fentech system: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm diameter sanding tools optimize sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a straight-through machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex system. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at the machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x twin-spindle unit for right-side processing - 1x twin-spindle unit for left-side processing - 1x twin-spindle unit for processing from below - 1x swiveling twin-spindle unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning NEW FEATURE: Fentech Standard optionally upgradeable to orbital sanding: The orbital sanders are installed in an extended housing section positioned ahead of the standard machine configuration. This allows us to combine the effective, scratch-free sanding action of the orbital sanders with the finish provided by the brushes. This ensures that the visible surfaces of the window profiles have a perfectly flat finish, completely free of raised wood fibers thanks to the subsequent brush sanding process. (Technical specifications provided by the manufacturer – subject to change!)

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Dcjdpfx Aozqvnvja Hsl Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed)

Condition: new, Number of sanding units 10 St. sanding width 25-240 mm Sanding height max. 15-140 mm MB ROBA Fentech ORBITAL, fully automatic sanding machine Dcodpfx Aezqvnpja Hjl Designed for sanding individual wooden components in window manufacturing, it is suitable for the following applications: - Fine wood sanding - Impregnation sanding - Intermediate lacquer sanding Advantages of the ROBA Fentech principle: - Automatic workpiece detection via scanner at the machine infeed - Motorized positioning of sanding units - Oscillating side units optimize abrasive utilization - 400 mm sanding tool diameter optimizes sanding quality - Angled profiles are sanded at their optimal angle - Can be used as a through-feed machine or in reversing mode for one-person operation - Vacuum transport system for processing short parts - Enclosed design for enhanced workplace safety and a dust-free environment - Compact, space-saving design - Freely selectable abrasive configuration from the MB Flex System. Brief overview of technical details (detailed description available upon request!): Workpiece length: max. unlimited, min. approx. 250 mm Workpiece width: 25–240 mm Workpiece height: 15–140 mm - Automatic, scanner-based workpiece detection at machine infeed - 2.0 m infeed table - Driven vacuum transport system - 1x Twin orbital sanding unit for right-side processing - 1x Twin orbital sanding unit for left-side processing - 1x Twin-spindle unit for right-side processing - 1x Twin-spindle unit for left-side processing - 1x Twin-spindle unit for processing from below - 1x Twin-spindle tilting unit for processing from above - 2.0 m outfeed table - Initial set of abrasives - Roba Fentech HMI (9" display, 400x400 housing, Siemens HMI) - Siemens control system - Electrical components: Klöckner Möller - Geared motor: Getriebebau Nord - Frequency converter: Schneider Electric - CE mark ----- Ex-works price upon request! Plus freight and commissioning (Technical specifications provided by the manufacturer – subject to change/without guarantee!)

Condition: excellent (used), Year of construction: 2006, Ercolina CML TB-76 Pipe Bender Excellent condition Year 2006 Foot Pedal Weight 193kg Power supply - 415v/3 phase Dcsdpfx Aou H Ibnea Hel