Used Elumatec Kf 178/10 for sale (30,797)

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 178000012, Machine in new condition, barely used. Bedpfx Aszk Ndqsc Tell

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Bsdjzwl R Tepfx Ac Toll Stroke: 110mm With side stops Weight: about 350 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: 178000041, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 12,000 rpm, total length: 4,000 mm, total width: 1,500 mm, total height: 1,500 mm, overall weight: 500 kg, ELUMATEC KF 178 Copy Milling Machine - Rated current: 6.3 A - Power input: 2200 W Bedpfx Ajztwzcoc Tell - Length of the left and right stops: 1600 mm FCA D-73235 Weilheim Teck - loaded onto a truck.

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters Bodpfx Acszxc Swj Tsll - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Blsdpfxjy D I R Se Ac Tel Machine no.: 20 192 Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2000, machine/vehicle number: 1780020742, functionality: fully functional, The machine was used very little. Bljdpfx Acjzmn N Re Tol Top routing unit: Cutting range using stops or copy templates 340 x 100 mm Travel 110 mm Bottom routing unit: Cutting range using stops or copy templates 240 x 85 mm Travel at front 95 mm Travel at back 45 mm Spindle speed 12,000 rpm Clamping range for profiles 115 x 100 mm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 980 mm, depth 1,250 mm, height 1,610 mm, weight 360 kg

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Bsdpfx Aszcz Dnoc Toll Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 13341-T, total width: 1,420 mm, total length: 1,576 mm, total height: 1,100 mm, overall weight: 2,000 kg, cooling capacity: 20 kW (27.19 HP), input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, Equipment: cooling unit, The system was taken out of service a year ago due to a switch to a centralized system. One year before decommissioning, all TCF elements were replaced. We can provide support for recommissioning. Technical data: - Total filter capacity approximately 210 l/min - Filter fineness approximately 3 μm nominal - Tank capacity approximately 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter columns - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system via a settling tank and scraper conveyor - In-line cooling via the return flow from the filter columns to the clean oil area via the plate heat exchanger, including flow control in the chilled water circuit - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel Blsdpfszxhcnex Ac Tel 2 pcs. machine supply pump for supplying the machine with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approximately 100 l/min - Delivery pressure: approximately 10 bar - Drive: 400V, 50Hz 2 pcs. drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approximately 30 l/min - Delivery pressure: approximately 6 bar - Drive: 400V, 50Hz 1 pcs. screwed plate heat exchanger with cooling control approximately 20kW Designed for cooling water 70 l/min, 13°C supply temperature.

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Bledsw Syzqspfx Ac Tjl Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Year of construction: 1992, condition: used, functionality: fully functional, machine/vehicle number: 33 432, Two-spindle copy milling machine, Elumatec KF 78 / 60 used & fully functional For processing aluminum or steel profiles With vertical and horizontal milling motor, spray device and pneumatic clamping device Bjdpfey Sxr Nsx Ac Tell Technical data (according to Elumatec): Profile height: 60 mm max Milling range, horizontal: 180 x 70 mm Milling range, vertical: 300 x 95 mm Stroke: 110 mm Drilling speed: 6000 rpm Milling speed: 12000 rpm Dimensions (H x W x D): 160 x 280 x 110 cm Weight approx. 260 kg

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12790-T, total width: 1,400 mm, total length: 1,560 mm, total height: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, input current: 32 A, type of input current: three-phase, input frequency: 50 Hz, operating pressure: 10 bar, space requirement length: 1,800 mm, space requirement height: 1,800 mm, space requirement width: 1,500 mm, coolant tank capacity: 800 l, The system was decommissioned one year ago due to a switch to a central system. One year before decommissioning, all TCF elements were replaced. In 2018, the filter elements in the sludge treatment system were upgraded to a more modern and process-reliable extraction system. Cooling was implemented via an on-site control system, including a chilled water unit. The cooling pump (oil side) is still present and installed. Should you require assistance with the design of the cooling system, we would be happy to support you. We can also assist with a restart on-site, if required. Technical data: - Total filter capacity approx. 210 l/min - Filter fineness approx. 3 μm nominal - Tank volume approx. 800 l - Designed for two hoppers WU305L/325L/105L including interface Equipment: - 3 filter groups, individually automatically backwashable, each with 2 TCF filter cartridges - 1 filter pump - 1 pneumatic unit - 1 automatic sludge treatment system consisting of a sedimentation tank and a scraper conveyor - Color RAL 7035 - 1 control cabinet, wired according to VDE standards, PLC control, operation and parameterization via touch panel 1 pcs. Variable speed machine supply pump for supplying the machines with filtered coolant as a submersible centrifugal pump Technical data: - Flow rate: approx. 200 l/min - Delivery pressure: approx. 10 bar - Drive: 7.5 kW, 400 V, 50 Hz with frequency inverter - Pressure sensor for constant coolant pressure, independent of the draw at the machine, included 2 pcs. Drive cooling pump as a submersible centrifugal pump Technical data: - Flow rate: approx. 30 l/min - Delivery pressure: approx. 10 bar - Drive: 400 V, 50 Hz 1 pcs. Cooling pump Brinckmann TA400/550 380 l/min 2m Drive 400 V, 50 Hz, 0.85 kW Bsdpjzxn Nnofx Ac Tsll 2 pcs. Shut-off valve 5/4" NC for coolant supply lines closing against the media flow as a shut-off valve between the machine and the central supply line.

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, cutting length (max.): 6,000 mm, Elumatic double miter saw incl. accessories, short-length cutting device, infeed roller conveyor, ECI-580 control system. Blodpfx Ajzfagloc Tel

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: ELUMATEC SBZ 610 cutting center, manufactured in 2020. Blodpfx Aezpwzbsc Tol The machine is in perfect working order and ready for operation.

Year of construction: 2018, condition: used, Manual length adjustment via hand crank For attachment to any Elumatec single-head saw (right) Bledszx U Nnjpfx Ac Tel Max. feed length: 3,000 mm

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 1012331637, Precision Vee-cuts in aluminium and PVC profiles Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Equipped with pulsed coolant system Cutting range for Vee-cuts: cutting depth 60 mm, profile height 100 mm Bledpfjzrcfqsx Ac Tel Saw blade diameter 254 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.9 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Bjdpfovi R Avox Ac Tell EU shipping - 350 euro

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min Blodjzughbopfx Ac Tjl air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96

Condition: excellent (used), Year of construction: 2005, Excellent technical condition, recently serviced. Cutting length: 6000 mm Saw blades: 420 mm E550 control system Vertical pneumatic clamping Cutting based on external dimensions, without adjustment Pneumatic angle adjustment from 45 to 90 degrees Bjdpfxjzr Icns Ac Tsll Cooling system installed Digital angle indicator Saw blade guards that automatically lower and raise.

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Horizontal cutting ranges: With stop: 300 × 100 mm With template: 270 × 70 mm Travel: 80 mm Vertical cutting ranges: With stop: 290 × 100 mm With template: 230 × 70 mm Bjdpfx Acsyxnx Ss Tell Travel: 120 mm

Year of construction: 2010, operating hours: 11,200 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12222321222, Equipment: type plate available, Elumatec SBZ122/33 profile machining center, year 2010 Technical data: Working area: X - 3850 mm, Y - 350 mm, Z - 280 mm Electrospindle 10 kW - max. 20,000 rpm (overhauled in 2023) (RF-HSK-F63 125/125x430 24/6.5) Bedpow Rv A Ujfx Ac Toll Tool holder HSK-63 F Tool changer Work table with 4 clamps with automatic positioning Pneumatic clamping operation Photoelectric safety barrier Operator handheld terminal Control panel workstation USB connection Operating software: Windows 7 system Production software: EluSoft, EluCAM Numerical control: Ferrocontrol Protective fencing with doors (laser safety barrier) Automatic and central lubrication of linear guides Weight: 1,940 kg Total connected load: approx. 14 kW Machine dimensions: 4,670 x 2,000 x 2,540 mm Required space: 5,165 x 3,000 x 2,540 mm Machine used for aluminum profile processing. Serviced and ready for operation.

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Blodpfszupzqsx Ac Tel Max Width of material cutting 455mm BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: excellent (used), Year of construction: 2024, operating hours: 193 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 340 mm, cutting width (max.): 335 mm, workpiece length (max.): 6,000 mm, milling spindle speed (max.): 6,000 rpm, section length (max.): 6,000 mm, TECHNICAL DETAILS - Profile Milling Machine Processing length: 7,200 mm Number of axes: 4 Control: eluCAM graphical, Windows XP user interface Workstations: 2 independently operating stations Turret tool changer: 8 tools, servo motor driven Tool holder: BT 30 Disc mill diameter: 180 mm Tool length: 150 mm (from point of attachment) Travel distances Travel X-axis: 7,200 mm (without end-face processing), 7,080 mm (with end-face processing) Travel Y-axis: 480 mm Travel Z-axis: 340 mm Rapid traverse X-axis: 60 m/min Rapid traverse Y-/Z-axis: 30 m/min Positioning accuracy: ±0.1 mm/m Spindle Milling spindle speed: 1 to 6,000 rpm Milling spindle power: 6.0 kW Supply Air connection: min. 7 bar Air consumption: 100 l/min Electric connection: 400 V, 3~, 50 Hz, 35 A EQUIPMENT two independent workstations with light barrier and camera system Non-swiveling inclined milling head for 2 tools, Er20A, up to 18,000 rpm Inclined milling head swiveling 4 × 90°, Er20, up to 22,000 rpm Inclined milling head non-swiveling for steel, Er20A, 1,554 rpm Fixed saw head i=1:1, for D=300 mm saw blade, suitable for 90° cross cuts Carbide saw blade Z=100, D=300 mm, cutting width 3.2 mm Tool holder i=1:3.86 for 18,000 min⁻¹, ER25 Cooling/lubricating unit for steel processing Disc milling holder BT30, D=16 mm Disc cutter D=92 × 6 mm, Z=14, D=16 mm, carbide teeth TECHNICAL DETAILS - Double Mitre Saw Blodpfx Acswprmze Tol Max. cutting length: 6,000 mm Min. cutting length at 90°: 335 mm Min. cutting length at 45°: 335 mm Saw blade diameter: 420 mm Cutting angle (rotation): pneumatically adjustable 90° and 45° inside, intermediate angles and 22.5° acute manually adjustable with digital display Cutting angle (tilt): pneumatically adjustable 90° and 45° inside Saw direction: saw blades move from bottom to top Control Control type: E580/1 Length adjustment: automatic with positioning control Saw blade tilt: pneumatically automatic between 90° and 45° Positioning accuracy: ±0.1 mm/m Positioning: pneumatic locking Operating system: Windows Saw unit Speed: 2,800 rpm Power per motor: 4,000 W (5.5 HP) Saw blade cooling: available Air consumption per cycle without cooling: 40 l Air consumption per cycle with cooling: 64 l Supply Electric connection: 230/400 V, 3-phase, 50 Hz Air connection: 7 bar Dimensions and Weight Length: 7,550 mm Width: 1,600 mm Height: 1,450 mm Weight: 1,750 kg EQUIPMENT Automatically closing protective covers Electronic positioning of the heads with +/- 0.1 mm/m accuracy Digital angle display for manually adjustable special angles Pneumatically adjustable saw blade rotational and tilt angles Operation via Windows control with 8.4" display and handwheel Cooling system for saw blades included Saw unit with bottom feed for optimal cutting force

Condition: used, machine/vehicle number: 008729, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Bedezylv Iepfx Ac Tjll Grooving Unit: yes Max feed speed: 40 m/min Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: excellent (used), Double side Sizing & Edge banding - First (1st) machine in a line Bedpoifnxxofx Ac Tsll Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 240 / 1000 Numerical Control / Software NC 21 / Homatic Adjustable feeding speed (m/min ) high speed 10 - 60 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + A34 (high Speed package) Pressure zone Edge coils supporting unit (No. of reels) 2 Rough Trimming unit 2 x Kw 0,55 Fine Trimming unit 2 x Kw 0,55 (0° - 30°) Finish processing unit (Glue scraper + Buffing unit) FA 11 Milling grooving unit UF11 (1 x Kw 4) 0°-90°

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Blodpfjhvrz Tex Ac Tel 6.000 mm