Used Elastomer Test Stand Bia Turnkey Test Syst for sale (21,400)

Condition: used, Elastomer Test Rig BIA Turnkey Test Systems Hexapod Item No.: PT-065 Name: Elastomer Test Rig Manufacturer: BIA Turnkey Test Systems Description: Test rig for determining and analyzing bearing characteristic curves and values at vehicle operating points bearing characteristic curves and values at operating points under specified temperatures bearing behavior under operating load (settlement behavior, characteristic curve changes) functional noise at operating points on elastomer bearings in the chassis/drive system Test specimens are mounted between an upper fixed platen and a lower mobile platen. The mobile platen is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates, to accommodate a wide variety of test specimens and fixtures. Degrees of freedom Amplitude Velocity Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340° / s 50 Hz 3.75 kNm Mys ±10° 360° / s 50 Hz 3.75 kNm Mzs ±25° 580° / s 50 Hz 3 kNm Gjdpfxjwhdnhs Aivekc Hydraulic hexapod: The hydraulic hexapod consists of six hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder has two parallel servo valves (38 l/min). The six cylinders drive the mobile plate via six connecting rods. The connecting rods have a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing comes directly from the cylinder. Linear actuator: The distance between the upper and lower plates can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw-nut system. The linear actuator is equipped with an absolute encoder. This is attached to the input shaft of the gearbox. Hydraulic actuator: The hydraulic cylinders are equipped with magnetostrictive position sensors. Resolution: 0.0015% Linearity:

Condition: used, This listing is for the Heidolph MR Hei-standard Magnetic Hotplate Stirrer The unit is in full working condition and is ready for immediate use The Heidolph MR Hei‑Standard is a laboratory magnetic hotplate stirrer—a reliable and robust device designed for simultaneous heating and stirring of liquids up to moderate scales. Key Features & Technical Specs Heating & Stirring: It heats up to 300 °C on the hotplate (with sample temperatures reaching around 250 °C) and stirs with speeds up to 1,400 rpm, capable of handling volumes up to 20 liters of water Gkodpfjxhfqnox Aivjc Heating Power & Plate: Offers around 800–825 W of heating power, using a ceramic-coated silumin (Kera‑Disk®) plate that ensures excellent heat distribution and resistance to scratches and chemicals Controls & Accuracy: Features analogue dials for setting temperature and speed (typically from 100 to 1,400 rpm), with speed accuracy of ±2% and temperature setting accuracy of about ±5 °C (or ±1 °C when using an external sensor)

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg Gkjdpfxeyc H N Nj Aivsc ⸻ Equipment / Included in delivery • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Condition: like new (used), Year of construction: 2014, functionality: fully functional, Tetra Alfast Direct Inline standardisation system, designed for inline standardisation of milk and cream. Capacity: 25,000 l/h. Gkjdpfx Aiowf Iq Uevsc Year of manufacture: 2014 Equipped with 2 density meters, 4 electromagnetic flowmeters, and 3 flow control valves for measuring and controlling the fat content in milk and cream. - Including original documentation. - Can be operated via Profibus central system - Can run stand-alone with SCADA system Sattline; we are currently working on integrating a control screen in the control panel to make stand-alone operation easier. - Excellent condition.

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Godpjznmvrofx Aivjkc Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Condition: good (used), Material testing station / final inspection comprising the following main components: Keyence XG-H500M Digital 5-million-pixel B/W camera Keyence XG-7701P Multi-camera image processing system / controller Keyence CA-DC21E Lighting controller Opto Engineering TC23096 Bi-telecentric lens Keyence XG-H500M Digital 5-million-pixel B/W camera CCD: 2/3-inch monochrome CCD, square elements, all pixels with 11x faster readout speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), line skip (40.3 ms) Interlace is a binning process that sums the odd and even lines. Model CA-DC21E Lighting controller Type: Lighting controller, for XG/CV-5000/CV-X200/CV-X100 series only Input: Forced lighting shutdown: Input voltage max. 26.4 V, min. 2 mA Output: Light control method (1) Constant voltage control method (DC lighting) (2) Pulse width modulation method (emission frequency: 100 kHz) [Change controller setting] Brightness levels 255 levels digital [Change controller setting] Number of connections: 2 channels (available for LED connection and terminal block connection) Voltage: 12 VDC / 24 VDC [Setting via DIP switch] Power: Max. 40 W (30 W per channel) Synchronization: Synchronization via FLASH output / continuous lighting [Change controller setting] Response time: (1) Constant voltage control: Max. 10 ms at 12V output, Max. 20 ms at 24V output (2) Pulse width modulation method: Max. 1 ms at 12V/24V output Gkjdpfjg Sxmfox Aivjc Display: LED display Supply voltage: 24 VDC ±10 % Power consumption: 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence XG-7701P Multi-camera image processing system / controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093x, C-mount Magnification (×): 0.093 Image circle Ø (mm): 11.0 Max. detector size: 2/3" Working distance (1) (mm): 278.6 wF/# (2): 8 Typical telecentricity (max) (3) (deg): < 0.06 (0.08) Typical distortion (max) (4) (%): < 0.04 (0.08) Depth of field (5) (mm): 77 CTF @ 70 lp/mm (%): > 40 Image area of the object (6): with 1/3" detector (4.8 x 3.6 mm) (mm × mm): 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm): 61.29 x 46.02 with 1/2" detector (6.4 x 4.8 mm) (mm × mm): 68.82 x 51.61 with 1/1.8" detector (7.13 x 5.33 mm) (mm × mm): 76.67 x 57.31 with 2/3" - 5 MP detector (8.50 x 7.09 mm) (mm × mm): 91.40 x 76.24 Dimensions Mount: C Phase setting (7): Length (8) (mm): 336.6 Diameter (mm): 143 Weight (g): 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelving racks, paternoster. High-quality industrial machines, lathes, grinding machines, hand tools. Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2020, operating hours: 500 h, functionality: fully functional, machine/vehicle number: M.1501739, Equipment: documentation/manual, type plate available, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Godpfx Aiszcnkbovjkc ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules and photovoltaic modules Testing of electrical and mechanical safety Gsdpfx Aijh Rvh Sovokc Support for product development, design, and quality control Early detection of potential problems during the development phase Quality and safety control Endurance testing stand Temperature control Mobile on rollers Pockets for forklift access 400 VAC, 3-phase, 50 AMP IR: 10,000 Amp Year of manufacture: 2012 Weight: 1400 kg Dimensions (H x W x D): 2900 x 1700 x 1900 mm You can find more testing equipment – new and used – in our shop! International shipping costs available upon request!

Condition: used, Keysight / Scienlab Battery Test System SL1001A + Angelantoni Climate Chamber DM500 C 10 ESS SPEEDY BT SP Complete Battery Testing System – For Laboratory Use Incl. PC, software & technical documentation For sale is a professional battery test system, consisting of: - Keysight / Scienlab SL1001A Battery Test System - Angelantoni DM500 C 10 ESS SPEEDY BT SP Climate Chamber - Monitoring/Sampling Unit - Control PC with original software - Technical documentation The system is fully functional, well-maintained, and ideally suited for battery module testing, research, development, and quality assurance. Technical Data – Scienlab SL1001A: - Manufacturer: Keysight / Scienlab - Model: SL1001A - Year of manufacture: 2020 - Voltage / Current / Power: 80 V / 600 A / 24 kW - Dimensions (L×W×H): approx. 1.6 × 0.9 × 3.3 m - Weight: approx. 700 kg - Function: Charging, discharging, and cycling of battery modules - Condition: Very well maintained, laboratory use only Technical Data – Angelantoni DM500 C 10 ESS SPEEDY BT SP: - Manufacturer: Angelantoni Industrie S.r.l., Italy - Model: DM500 C 10 ESS SPEEDY BT SP - Year of manufacture: 2019 Gkedpfjzil Txsx Aivsc - Weight: approx. 1,225 kg - Temperature range: -70 °C ... +180 °C - Humidity range: 10 ... 98 % rH - Refrigerants: R449A + R23 - Pressure ranges (PS Hi/Lo): 28 bar / 8 bar - Wi-Fi integrated - CE certification present - Internal dimensions (L×W×H): approx. 1.6 × 2.3 × 3.3 m - Function: Temperature and humidity testing, ESS (Environmental Stress Screening) - Power supply: 3PH + N + PE, 400 V ±10 %, 50 Hz, full load 54 A - Max. power consumption: 32.5 kW Monitoring / Sampling Unit: - Dimensions: 0.6 × 0.5 × 0.2 m - Measured variables: Cell voltages, current, temperature - Interfaces: CAN, Ethernet - Compatible with Scienlab / Keysight PathWave software PC + Software + Documentation: - Industrial PC with control and measurement software - Enables automated test runs, logging, and data analysis Overall Dimensions / Weight (approx.): Component Dimensions (L×W×H) Weight Scienlab SL1001A 1.6 × 0.9 × 3.3 m 700 kg Angelantoni Chamber 1.6 × 2.3 × 3.3 m 1,225 kg Monitoring / PC 0.6 × 0.5 × 0.2 m 50 kg Total system L 3.2 m × W 2.5 m × H 3.3 m approx. 1,975 kg Applications: - Development, testing, and lifespan analysis of battery modules (e.g., Li-ion, LFP, NMC) - Fast charging and cycle tests - Environmental simulation for temperature and humidity - Research, industrial, and university laboratories Important Note: "The table shown in the photos is not included in the sale." Scope of Delivery: - Scienlab SL1001A power unit - Angelantoni DM500 C 10 ESS SPEEDY BT SP climate chamber - Monitoring/Sampling unit - Control PC with software - Technical documentation and manuals - Connection cables and accessories (as available) Condition: used Scope of delivery: (see image) (Specifications and data are subject to change and error!) For any further questions, we are happy to assist you by phone.

Condition: used, Universal Shaker Angle Adapter / Adapter Devices For sale is a used accessory kit for an electrodynamic shaker or vibration test stand. The kit consists of various solid aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. The components are ideally suited for individual test specimen mounting, special designs, and use on vibration test stands and vibration testing systems. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test stand Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners Equipment: Several solid angle adapters Adapter plates of various sizes Clamping and fastening devices Clamping blocks and adapter elements Fastening material and other accessories as shown in the pictures Solid aluminum construction Threaded holes and clearance holes Universally applicable Areas of application: Electrodynamic shakers Vibration test stands Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs Scope of supply: Complete accessory kit as shown in the pictures Angle adapters Adapter plates Clamping devices Clamping blocks Gedezpx Ucjpfx Aivekc Fastening material Other accessories as shown in the pictures Condition: Used. Visual condition as shown in the pictures. Normal signs of wear and tear, as well as scratches and indentations, are present. Transport: Only the accessories shown in the pictures are sold. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Universal Shaker accessory kit / adapter plates / expander plates Professional accessory kit for electrodynamic shakers and vibration test benches For sale is a comprehensive used accessory kit for electrodynamic shakers or vibration test benches. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, and additional adapter and clamping components for professional use in vibration and shock testing. These components are ideally suited for test specimen mounting, special fixtures, and custom adapter designs in the field of material testing, environmental simulation, and research and development. Technical data Manufacturer: unknown Type: Accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components • 1 expander plate, approx. 770 × 770 mm Weight: approx. 90 kg • 2 adapter plates, approx. 770 × 770 mm Weights: approx. 45 kg and approx. 40 kg • 1 adapter plate, approx. 770 × 770 mm Weight: approx. 35 kg • 1 adapter plate with circular cutouts Weight: approx. 25 kg • 1 round adapter plate Weight: approx. 20 kg • 1 clamping rail / linear adapter Weight: approx. 25 kg • 1 precision adapter block Weight: approx. 3.06 kg • 1 steel adapter plate Weight: approx. 2.18 kg • Additional adapter and fastening parts as shown in the images Features Solid aluminum constructions Reinforced expander plate with central mounting Precision-manufactured adapter plates Bore and thread grid for flexible test specimen mounting Adapter plates in various sizes Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional accessories as shown in the images Application areas Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Fatigue testing Automotive industry Aerospace Research and development Test specimen mounting and special constructions Shipping information Shipping on a pallet or pickup possible. Due to the high total weight, shipping will only be by freight forwarder. Condition Used. Optical condition as shown in the images. Normal wear and tear, scratches, and pressure marks present due to age. Some minor edge damage from previous use. Scope of delivery Complete accessory kit as shown in the images. Expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Additional adapter and fastening parts as shown in the images. Note: Only the accessories shown in the photos are being sold. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping information Shipping on a pallet or pickup possible. Gjdszp D Tkjpfx Aivekc Due to the high total weight, shipping will only be by freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, machine/vehicle number: 18331, test stand for performance up to 2.2 KW Gkodeghwwxspfx Aivsc speed control speed change hand remote control with cable for switch of speed and rotational direction data concerning converter please refer to type plate connection cable CEE 32A output CEE 16A space requirements width - 600 x depth - 650 x height - 1,750 mm rollable weight approx. 85 kg  

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Testing System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of the facilities to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components used in oil and gas extraction. By injecting a chemical fluid, the well is stimulated. With the controller, high-pressure systems control and regulate counter-pressure and fluids. In this way, oil and gas can be extracted more safely. Manufacturer: Resato HBU testing system Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc Max. pressure: 7 bar Gkedpfsr Hmihsx Aivoc 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2022, functionality: fully functional, overall weight: 125 kg, input voltage: 230 V, total length: 1,500 mm, total height: 1,000 mm, total width: 700 mm, Equipment: documentation/manual, Siemens S7 PLC training and testing system AP2, electronics technician for automation technology – conveyor system Manufacturer: Stepp Fabrikautomation GmbH & Co. KG Year of manufacture: 2022 Control system: Siemens S7 PLC Description: For sale is a complete, professionally manufactured training and testing system for training in the field of electronics/automation technology. The system was manufactured by Stepp Fabrikautomation GmbH & Co. KG as a special machine and is used for the practical execution of tasks for the final examination, part 2 (AP2), for electronics technicians for automation technology. The module enables the complete execution of an automation task, from electrical wiring to PLC programming, commissioning, and troubleshooting. Technical equipment: Siemens S7 PLC control system Complete control cabinet with industrial wiring Voltage supply and protection technology Input/output circuitry Control of a conveyor system Motor drive with power unit Sensors and actuators Operating and signaling elements Terminal and documentation system Areas of application: Training for electronics technicians for automation technology AP2 examination preparation Vocational schools and technical training centers In-house training and further education Advantages: Industrial design based on special machine construction Not a simple training system, but a practice-oriented machine design Realistic simulation of an automation task Ready for immediate use Ideal for training apprentices Condition: Very good condition, year of manufacture 2022, fully functional. Godpfx Aiezp Iqmsvjkc Scope of delivery: Complete testing/training module Control cabinet Conveyor system PLC control system Existing documentation

Condition: used, This listing is for the Bio-Rad VARIANT II hemoglobin testing system The unit is in full working condition and is ready for immediate use The Bio-Rad VARIANT II is a high-volume, fully automated hemoglobin testing system. It is primarily used in clinical laboratories to measure HbA1c for diabetes monitoring and to detect -thalassemia and other hemoglobin disorders Automated Sampling: It accepts barcoded primary specimen tubes directly, eliminating the need for manual sample preparation. Godpfjyt Idvsx Aivskc Multi-Analyte Testing: It can switch between different testing methods, such as a 3.5-minute program for HbA1c and a 6.5-minute program for thalassemia. Variant Detection: It is designed to provide accurate results even in the presence of common hemoglobin variants like HbS, HbC, HbD, and HbE. Data Management: Results and chromatograms are managed through Bio-Rad’s Clinical Data Management (CDM) software, which can interface with a lab's information system (LIS) for real-time reporting

Condition: like new (used), operating hours: 250 h, SHI Machines Type: BlueBox Gedpfx Aiey Tg R Novekc Virtually unused with only 250 operating hours! Technical specifications: Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test bench made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Load capacity up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information provided are subject to change!) We would be happy to answer any further questions you may have by telephone.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, REF: MM6471 1 x 2021 CERTUSS complete steam generator system (Type – CERTUSS Universal 600 TC) with chemical dosing and blow-down vessel, automatically PLC controlled. The 2021 CERTUSS Universal 600 TC Complete Steam Generator System is a high-performance industrial steam generator designed to deliver reliable, energy-efficient process steam for continuous production environments. With a steam capacity of 600 kg/hour, the system is ideal for food and beverage processing, bakeries, meat and fish processing, ready meal production, pharmaceutical manufacturing, commercial laundries, chemical processing, and other industrial applications. KEY SPECIFICATIONS: Manufacturer: CERTUSS. Model: Universal 600 TC. Date of manufacture: 2021. Steam output: 600 kg/hour. Fuel: Propane (but can be converted). High-efficiency industrial steam generator. Compact vertical design. Fast start-up from cold. Automatic PLC control system. Complete steam generator package with ancillary equipment. Suitable for continuous industrial process steam applications. Gkedpfx Aiozn Rcisvoc Condition: Excellent - very low working hours.

Condition: used, Year of construction: 2023, machine/vehicle number: SE_00650, This RIDE60 type electric motor test stand, manufactured by FAZUA (custom-built), is for the RIDE60 electric drive series and was manufactured in 2023. It will be auctioned off in our online auction entitled "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: Manufacturer: FAZUA (custom-built) Type: End-of-line test stand Year of manufacture: 2023 (according to the nameplate of one station) Condition: used, functionality not checked Quantity: 3 identical stations available (auctioned separately) Location: 85521 Ottobrunn near Munich Test stand for final inspection of e-bike drive units from series production. The drive unit is tested and calibrated under load; power and torque are measured, among other parameters. Complete with control computer and label printer. Technical data (information without guarantee) Test track with servo motor, 2 pneumatic brakes, and torque sensor Metal bellows couplings Mount for the drive unit with quick-release mechanism Safety enclosure made of aluminum profile with transparent flaps Base cabinet with 3 doors Control panel with emergency stop, main switch, start button, indicator lights, and 2 manometers Panel PC 15.6" Label printer Zebra ZT231 Gksdpfxoz Ng Ayj Aivjc Hand scanner (not on all stations) Operating voltage 230 V / 16 A / 50 Hz (according to the nameplate of one station) Compressed air connection required (6.5 bar) Dimensions approx. 1,800 x 600 x 1,400 mm Sale Sale via online auction on RESTLOS.com. Bidding ends on 19.10.2026. Viewing: [16.10.2026; 9:30 a.m. to 12:00 p.m. – booking via our RESTLOS auction platform] All information without guarantee. Functionality not checked. Test software is not included in the offer unless expressly stated.

Condition: used, RMS Type: Test Manager SWR 900 RMS Electrodynamic Vibration System Gedpjz Nf Rcofx Aivokc Test Manager SWR 900 Component Carrier SWE 348 Load Amplifier SWE 366 Load Amplifier SWE 366 Power Supply SWE 350 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, RMS Vibration exciter / Vibration testing system RMS SW 6005 Vibration exciter sold exclusively as a source of spare parts. For sale is a used vibration exciter from RMS Regelungs- und Messtechnik. The device is explicitly sold solely as a source of spare parts. Functionality has not been tested. Operational readiness or completeness is not guaranteed. Technical data: Manufacturer: RMS Regelungs- und Messtechnik Designation: Vibration exciter Type: SW 6005 Year of manufacture: 1983 Voltage: 30 V Current: 200 A Force: 11,770 N Vibration amplitude: ± 13 mm Speed: 1.2 m/s Acceleration: 100 g Weight: approx. 700 kg (estimated) Equipment: RMS vibration exciter SW 6005 Mounting / clamping surface with threaded holes Pneumatic vibration isolation Gedpez Iqigjfx Aivokc Lateral spring elements Pneumatic components Operating and connection housing Cooling / air connection with hose Transport / lifting eyes Solid base frame Existing mounting and supply components Accessories as shown in the pictures Application areas: Spare parts sourcing Maintenance of existing vibration testing systems Supply of spare parts and subassemblies Reconstruction and repair projects Scope of delivery: 1 × RMS SW 6005 vibration exciter Existing mounting and supply components Cooling / air hose as shown in the pictures Accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Signs of wear and tear due to age and use Functionality not tested Sold exclusively as a source of spare parts. The device is explicitly not offered as a functional machine. No guarantee for functionality, operational readiness, or completeness. Shipping or freight shipping is possible. Subject to changes, errors, and prior sale. We are happy to answer any further questions by phone.

Condition: good (used), Betschart Swiss Transformer Core Testing System KPA 15 Function The output voltage, which can be continuously adjusted manually using a rotary knob, is fed directly to the excitation coils of the test core. This is intended to create a homogeneous electromagnetic field in the air gap of the test core, with which core material inserted into the air gap can be characterized. The basic operation of the core testing system is performed via the switching and display elements on the front panel at the front of the test carriage. Technical Data Input voltage: 2 x 400 V – 50/60 Hz Input current: 38.3 A maximum Output voltage: 0 … 230 V Output current: 65 A maximum Measurements: Moving-coil voltmeter 0 … 500 V for input voltage Moving-coil voltmeter 0 … 250 V for output voltage Moving-coil ammeter 0 … 40/80 A for input current Moving-coil ammeter 0 … 75/150 A for output current Laboratory sockets for external voltage measurement, direct, 1:1 Circuit breaker, 2-pole, 63 A, characteristic B Voltage measurement, output voltage Current measurement, output current Gkedpfxod Nxhkj Aivec Voltage measurement, input voltage Current measurement, input current Laboratory sockets for external current measurement, current transformer 50 A/5 A Current measurement, current transformer 75 A/5 A, output side Main and emergency stop switch Manufacturer's price: 27,000 EUR gross Matching adjustable transformers can be found in our shop. You can find more articles – new and used – in our shop! International shipping costs on request!

Condition: used, RMS Power Amplifier / Field Unit / Vibration Testing System RMS TGE 10-5/12 + RMS FE3 System package offered exclusively as a source of spare parts For sale is a used RMS system package for vibration testing systems, consisting of a power amplifier, cooling unit, and field unit. The components are sold exclusively together. Functionality has not been tested. Technical data, power amplifier: Manufacturer: RMS Regelungs- und Messtechnik Type: TGE 10-5/12 Serial No.: 16606 Year of manufacture: 2014 Input: 3 × 400 V / 50 Hz Power: 45 kVA Cooling unit: Type: SWG 761/9 Serial No.: 16608 Year of manufacture: 2014 Weight: approx. 250 kg Power stages: RMS power modules TGE 10-400 Several power modules are available in the amplifier cabinet Field unit: Manufacturer: RMS Regelungs- und Messtechnik Type: FE3 Serial No.: 10712 Year of manufacture: 1995 Current display: 0 – 300 A Weight: approx. 600 kg Dimensions and weight: Dimensions amplifier / cooling unit (W × D × H): approx. 1,800 × 800 × 2,000 mm Weight power amplifier: approx. 800 kg Weight cooling unit: approx. 250 kg Weight field unit FE3: approx. 600 kg Total weight: approx. 1,650 kg Equipment: RMS power amplifier TGE 10-5/12 RMS cooling unit SWG 761/9 RMS field unit FE3 RMS power modules TGE 10-400 System control panel with touch display Power transformers / chokes Power, control, and protection components Cooling system / cooling fan Analog ammeter 0 – 300 A Emergency stop, start button, and main switch Connection and supply components as shown in the pictures Application areas: Spare parts sourcing Repair of existing RMS vibration testing systems Supply of spare parts and sub-assemblies Rebuild and repair projects Scope of delivery: 1 × RMS TGE 10-5/12 power amplifier 1 × RMS cooling unit SWG 761/9 1 × RMS FE3 field unit Existing TGE 10-400 power modules System control panel Connection and supply components as shown in the pictures Condition: Used Visual condition as shown in the pictures Functionality not tested Sold exclusively as a source of spare parts. Not offered as a fully functional machine. No guarantee for function, operational readiness, or completeness. Shipping or freight shipping is possible. Godpfx Aoz Ixu Deivokc Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, UNHOLTZ-DICKIE Electrodynamic Vibration Testing System / Shaker System Model 560 / SALL50F Vibration testing system with power amplifier, controller, and cooling fan For sale is a used electrodynamic vibration testing system from the manufacturer UNHOLTZ-DICKIE. The system is suitable for vibration and shock testing in industry, research, development, and quality assurance. Technical data: Manufacturer: Unholtz-Dickie Corporation Shaker model: 560 System: TA117SA-560 Type: Electrodynamic / air-cooled Sine force: 6000 lbf / 26.7 kN peak Random force: 5200 lbf / 23.1 kN RMS Max. acceleration: 100 g Shaker stroke: 25.4 mm Axial resonant frequency: approx. 2200 Hz Effective anchor mass: approx. 20.4 kg Power amplifier: Type: SALL50F Power Amplifier Connection: 400 V / 3 phases / 50 Hz Rated current: 60 A Max. output current sine: 440 A RMS Max. output current random: 300 A RMS Controller / Software: Gjdpfx Aioz Nkm Asvjkc Brüel & Kjær Shaker Control Software version: 8.1001 Library version: 6.3120 Industrial PC with monitor, keyboard, and mouse USB license key as shown in the pictures Cooling fan: Manufacturer: Industrie CBI Type: RD 65 J AC induction motor: 15 kW 400 V / 50 Hz / 2935 rpm Equipment: Unholtz-Dickie Shaker Model 560 SALL50F Power Amplifier Control and regulation system CBI industrial cooling fan PC system with Shaker Control software 2 mounting plates with hole grid Connection cables and accessories as shown in the pictures System documentation / folder Application areas: Vibration testing Shock testing Resonance investigations Automotive and electronics testing Component and assembly testing Research and development Industrial quality assurance Scope of delivery: 1 × Unholtz-Dickie Shaker Model 560 1 × SALL50F Power Amplifier 1 × CBI industrial cooling fan 1 × PC system with software and license key 2 × Mounting plates Controller, cables, documentation, and accessories as shown in the pictures Weight approx. 1700 - 2500 kg Condition: Used Optical condition as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping by freight forwarder possible by arrangement. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Year of construction: 2011, Overview Complete turnkey craft brewery built around a 4-vessel Newlands Systems (NSI) brewhouse with a 35 hl brew length, delivered from Canada and installed in 2011-2013. The plant covers the full process chain: malt intake and milling, brewhouse, fermentation and maturation, yeast handling, CIP, steam and glycol cooling. Fermentation capacity is 9 x 70 hl cylindroconical fermenters plus 2 x 70 hl pressure-rated bright beer tanks. The brewhouse runs on a Siemens Braumat control system. The brewery is still installed and under power and can be visited in operation. Technical data - Manufacturer: Newlands Systems (NSI), Canada - Year of manufacture: 2011-2016 - Machine type: complete turnkey brewery, 4-vessel brewhouse - Brew length: 35 hl - Brewhouse vessels: mash mixer 44 hl, lauter tun 69.85 hl, boil kettle 58 hl, whirlpool - Fermentation and maturation: 9 x 70 hl fermenters, 2 x 70 hl bright beer tanks - Steam: 750 kW electric steam boiler, operating pressure approx. 4 bar - Control system: Siemens Braumat - Power supply: 3 x 400 V / 50 Hz Scope of Delivery - Brewhouse | Newlands Systems | 4-vessel, 35 hl brew length | Mash mixer, lauter tun with rakes, boil kettle with internal calandria, whirlpool, wort heat exchanger, progressive cavity grain-out and spent grains pumps, post-whirlpool solids filter | 2011 - Control system | Siemens | Braumat | Brewhouse control panel and operator station | 2011 - Hot liquor tanks | Newlands Systems | 2 x 60 hl, stacked | External steam heat exchanger, pumps and valving, 316 stainless wetted surfaces, water treatment dosing bin | 2012 - Fermenters | Newlands Systems | 9 x 70 hl working volume | Cylindroconical, 60 degree cones, standpipes, cooling jackets | 2012-2013 - Bright beer tanks | Newlands Systems | 2 x 70 hl working volume | Pressure rated, carbonation stone assemblies | 2012-2013 - Yeast storage tank | Newlands Systems | 700 l | Conical, cooling jacket, mixer | 2013 - Yeast propagator | Newlands Systems | 240 l working volume | 300 l total volume, AISI 304 stainless steel | 2012 - CIP station | Newlands Systems | Steam heating and pump | 2012 - Malt silo | MAFA Sweden | UNB 70 | 30 t capacity, outdoor installation | 2012 - Auger system | MAFA Sweden | Silo and mill connections, flexible auger, specialty grains dump hopper | 2012 Gksdpfszza Diox Aivsc - Malt mill | Bühler | 4-roller | 3.0 kW drive, ATEX marked | 2012 - Grist hopper | Newlands Systems | 1,000 kg | On load cells | 2012 - Electric steam boiler | Pannpartner | 750 kW | 3 x 400 V / 50 Hz, design pressure 16 bar, empty weight 800 kg, CE marked | 2011 - Glycol chiller | Daikin | Air-cooled water chiller, refrigerant R407C, 400 V | 2011 - Sterile air unit | Donaldson | 2016 - Pumps, fittings and accessories | 2012-2013 Condition Used - still installed and under power, available for inspection in production. Availability Immediately. Location: Norway. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Year of construction: 2016, condition: excellent (used), Type: ETS MPA409/M437A HP-3A For sale is a used vibration and shock testing system from the manufacturer ETS Solutions. Technical data: Vibration test system ETS MPA409/M437A Sine force approx. 39.2 kN Random force approx. 39.2 kN Shock force 6ms: approx. 78.4 kN Frequency range: DC-2,500 Hz Max. Displacement Continuous (deflection) 51 mm Max. Displacement at shock 51 mm Max. Vibration velocity (sine) 1.8 m/s Max. Acceleration (sine / random) 100/40 g Vibration exciter type M437A Diameter of vibration coil 370 mm Weight of vibration coil 34 kg Number of threaded inserts 16 stainless steel inserts Threaded inserts (standard) M10 Threaded inserts per bolt circle 8 at ∅ 150 mm Diameter of bolt circle 8 at ∅ 300 mm Resonant frequency of the armature without payload 2,250 (Hz ± 5%) Max. static payload weight 500 kg Axial frequency of the vibration isolation < 5 Hz Flux density < 1 mT Dimensions Length 1136 mm Width 860 mm Height 1118 mm Weight of vibration exciter 2470 kg Amplifier MPA409 - Output power approx. 40 kW - Amplifier efficiency > 90% - Dimensions approx. (L x W x H in mm): 550x800x1850 - Weight approx. 620 kg HP-3A cooling air blower - Power consumption approx. 7.5 kW - Dimensions approx. (L x W x H in mm): 945x693x1466 - Weight approx. 175 kg Vibration controller DTC VENZO 880 - 2 to 8 analog input channels - 1 to 2 control channels (suitable for two-axis control applications) - 450 MHz DSP processing, 100 Mbit/s Ethernet interface for PC connection (without grounding problems) - Operating temperature range: -30 to 70 °C - Fanless design to reduce background noise - Anti-aliasing filter with 160 dB/octave slope - 1 AUX channel - 24-bit ADC/DAC, 135 dB dynamic range - 204.8 kHz sampling rate, 80 kHz frequency range - 1 GB internal flash memory for storing test configurations - Design with ground-isolated ground to avoid ground loop problems Scope of delivery: (See picture) Condition: Used Signs of wear and tear due to age and use Gedpfx Ajzu Nxieivjkc Dirt, paint chips and traces of corrosion are present Optical condition according to pictures Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.