Used Ebu Ebu 75 for sale (6,653)

Condition: good (used), functionality: fully functional, tested machine : Ljdpfx Ansy St Ncj Ueab Power 75 tons Stroke rate 90 strokes throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Year of construction: 1972, condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW Lsdeb Tdqujpfx An Ueab space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Condition: used, Single-column eccentric press EBU Type 75 SKU Machine no. No. P 4598462 Year of construction 1962 Compressive force 75 ton. Laedpfjdzqltsx An Uob throat depth 300 mm Table surface 800 x 620 mm waste hole 325 x 225 mm Plunger surface 470 x 180 mm Clamping pin bore Ø 40 mm Table height above floor 845 mm Stroke adjustment 16 - 140 mm Plunger adjustment 80 mm Installation height max. approx. 420 mm Stroke rate 60 + 105 strokes/min. Motor power 4 kW Mains connection 380 Volt, 50 Hz. - Pneumatic clutch/brake combination EBU - Overload protection with breaker plate in ram - UNIDOR tool monitoring system, type APS MINI - mechanically driven gripper feed with belt straightener OSTERKAMP, type ZPN 200/350 - strip width: 200 mm, feed length: max. 350 mm - Strip thickness: max. 3 mm or approx. 200 x 1.5 mm - 2 speeds due to 2 V-belt stages on the wheel transmission - Two-handed operation - Simple work area shielding for swinging open - Table height adjustment in lowest position = threaded spindles for adjustment 50 mm below floor level - Control cabinet and control panel for tool monitoring adjacent - Automatic central lubrication - 4 machine feet Space requirement L x W x H 2600 x 2300 x 2450 mm Weight approx. 5.5 tons good condition

Condition: good (used), Year of construction: 1960, machine/vehicle number: P4461960, Offer 25471 Technical Data: - Pressing force: 75 t - Throat depth approx.: 300 mm - Table size approx.: 800 x 600 mm - Height-adjustable table - Stroke adjustment approx.: 16 - 140 mm - Ram adjustment: 80 mm - Strokes per minute: 80 Laedpfx Ajxxwc Ren Ujb - Pneumatic connection - Drive: 400 V - Space required approx.: W 1800 x H 2450 x D 2000 mm - Weight approx.: 4000 kg

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Lsdpfx Aevut Hhsn Ujab Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation

Condition: used, Year of construction: 1970, machine/vehicle number: P5063870, functionality: not functional, power: 4.05 kW (5.51 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 75 t, table width: 800 mm, table length: 620 mm, table height: 740 mm, throat depth: 300 mm, distance table to ram: 450 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 2,700 mm, overall weight: 4,475 kg, year of last overhaul: 2026, punching force: 75 t, compressed air connection: 8 bar, control cabinet height: 1,300 mm, control cabinet length: 350 mm, control cabinet width: 500 mm, DGUV certified until: 05/2027, drop-through hole in table: 250 mm, height adjustment type: mechanical, installation height: 450 mm, mount diameter: 40 mm, ram adjustment: 80 mm, ram bore: 40 mm, stroke adjustment: 140 mm, Stroke adjustment 16-140mm Ledpfx Asyv Havsn Ujab Mechanical safety guard Flywheel drive with reversible idler gear Overall height with raised safety guard approx. 4100mm Additional clamping plate 790x610mm with insert diameter 250x120mm Spring-loaded base

Condition: used, Year of construction: 1988, stroke 16-140 mm Lsdox H Txyspfx An Usab pressure 75 t weight 4,6 t

Condition: good (used), Year of construction: 1987, functionality: fully functional, pressing force: 75 t, table width: 600 mm, table length: 800 mm, total length: 20,400 mm, total width: 18,300 mm, total height: 24,100 mm, overall weight: 4,650 kg, ram adjustment: 80 mm, To be viewed under power. Lodpfx Aerr Sybon Ueab

Year of construction: 1971, condition: used, pressure 75 t throat 310 mm stroke 16-140 mm no. of strokes 105 Hub/min ram - range of adjustment 80 mm table surface area 800x610 mm ram surface 600x175 mm Lajdpfolp U Eijx An Usb hole in the table Ø 170 mm table height 820 mm tool hole in ram Ø 40 mm weight of the machine ca. 4 t dimensions of the machine ca. 1500x2000x2700 mm

Condition: not inspected (used), machine/vehicle number: P5541750, functionality: unexamined, pressing force: 25 t, stroke length: 180 mm, overall weight: 500 kg, stroke adjustment: 80 mm, No reserve price – guaranteed sale to the highest bidder! Bidding entails a binding obligation to collect the item within the period from 23.06.2026 to 26.06.2026! TECHNICAL DETAILS Nominal pressing force: 22 t Maximum pressing force: 25 t Stroke adjustment: 80 mm Stroke: 180 mm Lsdpfjy D Tafjx An Uoab MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,000 x 1,900 mm Machine weight: 500 kg External reference: 64

Condition: used, Year of construction: 1961, pressure 25 t throat 200 mm stroke 4 - 80 mm table surface area 595 x 410 mm ram adjustment 70 mm no. of strokes 150 Hub/min table adjustable in height 240 mm total power requirement 1,1 kW weight of the machine ca. 1,45 t Ledpfotqqxbex An Usab dimensions of machine L x W x H 1,30 x 0,80 x 2,0 m

Year of construction: 2013, condition: excellent (used), 1. SCOPE OF SERVICES - EBU H 12 FT Eccentric press - Siegfried SPC control unit 2. DOCUMENTATION - Complete operating documentation available 3. TECHNICAL DATA Year of construction: 2013 Type: Eccentric press Nominal force: 120 kN Lsdpefrzlmjfx An Uoab Max. mould installation height: 170 mm Max. weight of upper mould part: 25 kg stroke adjustment range: 30 mm ram height adjustment: 40 mm Stroke rates: 40-200 1/min Pneumatic operating pressure: 5.5/10 min/max bar Electrical connection: 400 VAC, 50 Hz Weight: 1200 kg

Condition: good (used), In this offer you buy a used cutting plotter "Mimaki CJV150-75" Item for sale: 1 x Mimaki CJV150-75 with the following equipment: incl. 8 ink colour printing system incl. special colours: orange, white and light black Ledpfx Anehg Amae Uoab - Print head must be replaced Condition: This is a used machine and may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The unit has been tested for function A test printout can be seen in the photo. For more information you can of course contact us personally. Shipping is possible on request!

Condition: used, Year of construction: 2008, pressure 40 t throat 230 mm stroke 4-100 mm table surface area 650x450 mm ram surface 420x220 mm Laodey I Ddvepfx An Ujb ram - range of adjustment 85 mm hole in the table 170x220 mm table height 800 mm no. of strokes 60 Hub/min dayligth 375 mm Dimensions (HxWxD) 2800x1200x1900 mm weight of the machine ca. 3,2 t

Condition: used, Year of construction: 1989, Capacity: 80 ton Throat depth: 280 mm Ram stroke: 8 - 140 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 520 mm Table surface area : 850 x 670 mm Slide area: 550 x 400 mm Hole in table: 250 x 180 mm Ledpfxsy Hqz So An Usab Number of strokes: 20 - 100 s.p.m. Required power: 7,5 kW Dimensions L x W x H: 2210 x 1510 x 2750 mm Oil volume: 50 l Die weight at the ram max.: 300 kg Weight of machine approx.: 8,3 ton

Condition: excellent (used), REMS Cut 110-75-50 Lasdjy Rt Icspfx An Usb

Condition: excellent (used), CATALOGUE NUMBER 7026 TECHNICAL DATA - feed opening width: 740 mm - feed opening height: 300 mm - shaft width: 780 mm - shaft diameter: 1000 mm - knife length: 780 mm - number of knives: 2 pcs - screen dimensions: 55x55 mm - from below: 4 toothed feed rollers - lower roller motor: 5.5 kW - from above: 3 toothed feed rollers - upper roller motor: 5.5 kW - belt feeder - belt feeder length: 4300 mm - belt feeder width: 600 mm - belt feed drive motor: 2.2 kW - main motor: 90 kW - reverse gear - auto-reverse Laodpfsy Nzv Sex An Usb - overall machine dimensions (L/W/H): 4600x2350x1700 mm - overall feeder dimensions (L/W/H): 4550x980x970 mm - total weight: approx. 11,000 kg – German manufacture - auto-reverse (with adjustable setting) – used chipper, in very good condition Net price: 231,900 PLN Net price: 55,200 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Laedpfx Ansua Eu No Uob Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Lajdpfsm Uxzujx An Usb Number of strokes: 150 / min Drive Motor: 380V 1.1KW Required space: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Condition: used, functionality: fully functional, power: 22.06 kW (29.99 HP), punching force: 250 t, EBU eccentric press suitable for inlay work, UV-tested Stroke adjustment from 10-140 mm Ram adjustment 80 mm Ljdpfx Anov T Dapj Ujab Stroke rate 50 /min.

Condition: good (used), I am offering an industrial vertical pump from the renowned German brand ALLWEILER GmbH – model NLT 50-200. This pump is designed for continuous operation in industrial, water, and process installations. The equipment is fully complete with an electric motor. Condition: used – visible signs of storage and slight surface corrosion. ⚙️ Technical data Manufacturer: ALLWEILER (Germany) Model: NLT 50-200 Year of manufacture: 2014 Capacity: 75 m³/h Head: 48 m Rotational speed: 2900 rpm Motor power: 11.6 kW Power supply: 400V (50 Hz) 460V (60 Hz) Connection diameter: approx. 65 mm Design: vertical (vertical inline pump) ✅ Technical condition Lajdpfx Asyxtfwen Ujb complete pump with motor no visible mechanical damage rotates freely visual condition as shown in the pictures (storage marks, surface rust)

Condition: used, Year of construction: 1970, ja weight of the machine ca. 9,5 t serial number 10457/2 160000 KG stroke of worktool slide 41 Hub/min +++++ Laodpfxovvx Exj An Usb Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: like new (used), Generally overhauled machine Price: 4.500EUR Dough mixer With paddle Kemper Lajdpfox N Efqsx An Usb The machine has 2 speeds Bowl and mixer made of stainless steel Mobile unit on wheels Automatic timer Capacity: 180 liters / 120 kg of dough or 75 kg of flour

Year of construction: 1990, condition: excellent (used), Presskraft 800 kN , Hubverstellung 30 - 240 mm , Stößelverstellung 80 mm , Hübe 30 - 90 / min , Tisch 1.200 x 800 , Durchfalloch 350 x 370 , Stößel 900 x 450 , Aussladung 410 , max. Tisch - Stößel 695 , Auswerfer , Ausweferweg 70 , Stößelgewichtsausgleich , Öl-Luft -Kühlanlage , sichere Steuerung III Höhe 3.600 Laedpfx Ansiuxwqj Usb Breite 1.660 Tiefe 2.400 Gewicht 12.100 kg

Year of construction: 1987, condition: used, pressure 40 t throat 270 mm stroke 4-100 mm no. of strokes 130 Hub/min ram - range of adjustment 80 mm table surface area 670x540 mm ram surface 460x300 mm hole in the table Ø 100 mm table height 850 mm Ljdpfsp Syctex An Ujab tool hole in ram Ø 50 mm weight of the machine ca. 6 t dimensions of the machine ca. BxTxH 1500x2300x3300 mm