Used Ebert Tls 43 Atv Forst-Teleskoptieflader 30,5T for sale (3,961)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Fgedeyfvwbepfx Aivsh Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Fedpfxoyfu N Aj Aivogh Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical specifications for the EBERT TLS 43 ST special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Payload: approx. 32,200 kg, Low-bed length: 9,350 mm, Axle center distance: 2,700 mm, Overall width: 2,550 mm, Loading height/low-bed: approx. 200 mm, 350 mm, Overwidth signage at the front and rear with red/white signs Wheels: 245 / 70 R 17.5 Steering: TRIDEC Axles: 12,000 kg – Gigant axles, hydraulically steered Electrical system: NATO connector used, power supplied by the towing vehicle, rotating beacon at the rear center, side marker lights in LED design, standard rear light for vertical mounting (LC5) Hydraulics: Hydraulic system on the upper deck for steering Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. Further information can be found on our website. Errors and prior sale are subject to change! Rental possible = Further information = GVWR: 43,000 kg Please contact Tobias Ebert for further information. Fodpsyfp Aqefx Aivogh

Condition: used, axle configuration: 2 axles, total length: 157,000 mm, total width: 25,500 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = - EBS - Electronic Braking System - Air suspension, rear - Air suspension, front Fgodpez Engkjfx Aivsh = Notes = For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. ). Used EBERT forestry semi-trailer, low-bed trailer, type: TLS 36 ST, VIN: W0985180080D17001 self-supporting, with ECAS air suspension, fully hydraulically steered with remote control & ABS First registration: 03/2008, Permissible gross weight: 36,000 kg, Saddle load: 16,000 kg, Rear axle load: 20,000 kg, MOT: 01/2007, Low-bed length: 8,750 mm, Length: 15,700 mm, Width: 2,550 mm, Payload approx.: 27,000 kg The forestry machine is transported at a height of approx. 10-25 cm above the road surface. Tires: 235/75R/17.5 low-profile, tubeless. Tire tread: 1st axle 9-12 mm, 2nd axle 7-11 mm Axles: 2 x 10 tons Axles with S-cam brakes and ABS, hydraulically actuated two-circuit forced steering controlled from the kingpin. Saddle plate with 2-inch kingpin and drive-away wedge. 24V electric generator with HD piston pump, oil tank and 2 batteries enable remotely controlled functions via wireless remote control. Brakes: Two-line brake system according to EC with spring-loaded brake cylinders acting on the rear axles. With ABS Lighting according to StVZO (German Road Traffic Licensing Regulations). Integrated into a recessed underrun protection, incl. license plate holder. Also, warning lights in the pull-out marker panels for overwidth transport. The hydraulic forced steering is equipped with a wireless remote control as standard, so the driver can "steer" from the cab in tight hairpin turns and during turning maneuvers. Options included in the price: a. Yellow rotating beacon at the rear, pluggable b. with 4 pull-out marker panels (red/white) with a retracted width of 2,550 mm and an extended width of 2,750 mm or 3,000 mm. c. with electro-hydraulically operated ramps Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. ... Errors, changes and prior sale reserved !!! - Steering axle = Further information = Unladen weight: 9,000 kg Payload: 27,000 kg GVW: 36,000 kg Last inspection: 2027-01 Please contact Tobias Ebert for further information.

Condition: new, axle configuration: > 3 axles, Equipment: ABS, Ebert TL 40 ST special low-loader, continuous flatbed design, self-supporting construction, permissible total weight: 40,000 kg, unladen weight: 8,900 kg, payload: 31,100 kg, dimensions: 14,000 mm x 2,550 mm (also available in a wider version), fully air-suspended, trailing lift axle, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! Fgedpfx Aisyfrfzjveh = Further Information = Please contact Tobias Ebert for more information.

Condition: new, axle configuration: 3 axles, total length: 120,000 mm, total width: 25,500 mm, Equipment: ABS, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = Ebert TL 30 ST Forestry Special Lowboy Trailer, completely flat bed, self-supporting construction. Permissible total weight: 30,000 kg, unladen weight: 5,900 kg, payload: 24,100 kg, dimensions 12,000 mm x 2,550 mm (also available in a longer and wider version), fully air-suspended, last axle with trailing linkage, SAF axles. Mr. Ebert (tel. ...) will be happy to assist you. You can find more information on our website. Errors and prior sale are subject to change! = Further Information = Unladen weight: 5,900 kg Fgsdpfx Ajyfq Afsiveh Payload: 24,100 kg GVW: 30,000 kg Please contact Tobias Ebert for further information.

Condition: new, axle configuration: 3 axles, total width: 27,500 mm, Equipment: ABS, Ebert TL 30 ST LB special low-bed trailer, fully flat bed, self-supporting design. Permissible total weight: 30,000 kg, unladen weight: 6,900 kg, payload: 23,100 kg, dimensions: 13,600 mm x 2,750 mm (also available in a standard version), fully air-suspended, last axle with trailing steering, SAF axles. Mr. Ebert (Tel. ...) will be happy to assist you. For further information, please visit our website. Errors and prior sale excepted! = Further information = Please contact Tobias Ebert for more information. Fgjdoyfu Urjpfx Aivjh

Condition: used, functionality: fully functional, Year of construction: 2019, machine/vehicle number: 53, overall weight: 38,500 kg, input voltage: 400 V, input current: 355 A, input frequency: 50 Hz, broaching speed: 12 m/min, workpiece diameter (max.): 225 mm, total length: 7,100 mm, total width: 11,560 mm, total height: 6,000 mm, Forst RISH 60 x 2125 x 630 – Vertical internal broaching machine Used Forst broaching machine for internal broaching of ring gear workpieces. The machine features a lifting table and a servo-electric broaching drive; the broach pitch is set via the NC program. Machining is performed individually or in pairs, depending on the workpiece. Identification Manufacturer: Forst Technologie GmbH & Co. KG Type: RISH 60 x 2125 x 630 Factory number: 53 Forst order number: M233202 Reference / Inventory number: 351024 Year of manufacture: 2019 (according to machine data sheet) Technical data according to machine documentation Fgsdpfx Aiez Hq Akovsh - Maximum tensile force: 600 kN - Maximum stroke: 2,125 mm - Maximum cutting speed: 12 m/min - Return stroke speed: 20 m/min - Maximum workpiece diameter: 225 mm - Maximum workpiece height: 50 mm - Maximum tool diameter: 200 mm - Tool shank diameter: 80 mm - Tool tip diameter: 75 mm - Overall dimensions (L x W x H): approx. 7,100 x 11,560 x 6,000 mm - Total weight of the machine: approx. 38,500 kg - Weight of the base machine: approx. 34,500 kg - Electrical connection: 400 V, 3 phases, 50 Hz - Rated current according to nameplate: 355 A Documented features - Siemens SINUMERIK 840D sl / S7-300 - Operator panel OP012 and hand-held operating unit HT8 - SKF roller screw drive and linear guides - Hydraulic workpiece clamping - Coolant system with high/low pressure supply and 1,800-liter tank - Chip conveyor and chip centrifuge - Oil mist separator and central lubrication system Operating manual and technical documentation are available. The data and features listed describe the documented machine condition. The actual scope of supply should be agreed upon before finalization. The suitability for other workpieces requires a technical assessment and, if necessary, adapted tools and fixtures. Used machine, operated without malfunctions until disassembly. Price on request.

Condition: used, Year of construction: 2008, cutting width (max.): 2,200 mm, controller model: POWERCONTROL, cutting length (max.): 4,300 mm, Equipment: scorer, TECHNICAL DETAILS Maximum panel width: 2,200 mm Maximum panel length: 4,300 mm Maximum main saw blade overhang: 125 mm Maximum feed rate: 80 m/min Saw unit Maximum tool diameter, main saw: 450 mm Motor power, main saw: 13.5 kW Maximum tool diameter, scoring saw: 180 mm Motor power, scoring saw: 2.2 kW MACHINE DETAILS Control system: POWERCONTROL Lift table, number of levels: 4 Clamping system, clamping jaws: 10 EQUIPMENT Lift table Saw unit Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5552 Fedpfsz Eklvjx Aivjgh

Condition: new, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 62,000 mm, loading space width: 25,000 mm, Year of construction: 2024, Equipment: ABS, EBS, air conditioning, = Additional Options and Accessories = - Braking system = Notes = Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), Rear axle 13.4 t, Tag axle 8.0 t steered & liftable, Electronic braking system with ABS and ASR, Retarder, Trailer brake 2-line, Wheelbase 4,800 mm, Stabilizer on front axle, Rear underrun protection, Front underrun protection, Air connection in the cab, air-sprung driver comfort suspension seat, functional passenger seat, side sunblind on driver's side, air conditioning, hot water auxiliary heater, circuit breakers, voltage converter 24 V / 12 V, power socket 24V / 25A in the passenger footwell, programmable special module PSM, trailer socket 24V / 15-pin, M-cab StreamSpace 2.30m, comfort cab suspension, sun visor, heated front mirrors, air horn, movable cab access, comfort locking system with central locking, Mercedes PowerShift 3, axle configuration 6x2 with HAD, 26.0-ton vehicle, air suspension rear axle, radio/CD with Bluetooth, axle load measuring device, pre-wiring for CB radio, pre-wiring for toll collection, main tank 510 L, AdBlue tank 60 L, Euro 6, air compressor 2-cylinder, transmission oil cooler, trailer coupling, stability assistant, cruise control, and much more.... Box with hydraulic flaps, length: 6,200 mm, volume: 41 cbm, box KTL-coated, Crane: Palfinger Q170L with 2 hydraulic supports, liftable cabin with auxiliary heater, fully hydraulic double telescopic boom (reach 11.5 m!), oil cooler, rotator, Optional equipment: - Timber grapple Epsilon FG53 - GMT 050 with and without TTC - Quick-change system between felling grapple and timber grapple - extendable heavy-duty drawer for timber grapple / felling grapple - Front blade over cab with crane storage Application: Processing and removal of cut timber. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. will be happy to assist you. Further information can be found on our website. Errors and prior sale reserved! ESP, auxiliary heater Cab: Long-distance = Further Information = Cabin: High sleeper cab Engine displacement: 12,800 cc GVWR: 26,000 kg Please contact Tobias Ebert for more information. Fedpfeyfpn Tex Aivogh

Condition: used, Year of construction: 2025, Mr. Herden will be happy to assist you with any inquiries regarding the wheels (by phone). Forestry wheels / rim / 4 units in stock & immediately available Price for four wheels: €2,490.00 net / €2,963.10 gross Forestry rim 20.00 x 24.5, TUBE EDGE 8/291.3/335, offset ET-55, 21.5 mm / 37 mm ball seat Agricultural rim valve TR 618, Alligator Screw-in water valve, straight, 50 mm long For valve hole Ø 15.7 mm, max. 10.5 bar, V5-01-1 We have many more products in our warehouse that are immediately available! Mr. Herden (phone) will be happy to assist you. Fjdpoyuafbofx Aivogh Upon request, we will also be pleased to provide you with a financing offer. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction machinery. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Subject to errors and prior sale! = Further information = Intended use: Construction Please contact Marius Herden for further information.

Condition: used, machine/vehicle number: FN535356, Year of construction: 2017, operating hours: 3,483 h, load capacity: 3,500 kg, lifting height: 3,600 mm, fork length: 1,800 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,500 kg Lifting height: 3,600 mm Fork length: 1,800 mm MACHINE DETAILS Mast type: Duplex mast Drive type: LPG Dimensions & Weight Dimensions (L x W x H): 5,700 x 1,300 x 2,420 mm Own weight: 4,896 kg Fjdpfx Aisz Iwrhovjgh UVV certification valid until: 05/2027 Next service due in: 516 hours Starter battery: new in 05/2027 Operating hours: 3,483 hours EQUIPMENT Former Jungheinrich full-service unit Side shifter Free-lift mast without center hydraulic cylinder 3rd valve Full cabin Heater Windshield wiper LED work light (front) LED work light (rear) Comfort seat LPG cylinder exchange system All dimensions are rounded values. No warranty is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 172

Condition: used, Year of construction: 2023, Vertical mixing line consisting of: Hosokawa micron 20-MFC-43 conical mixing tank, year of manufacture 2023, capacity 2000 kg, total volume 3350 liters, empty weight approx. 1350 kg Donaldson Torit DCE dust filter, type DCE 125 F, year of manufacture 2023 Ruberg eddy current separator, type RWS 2-220, year of manufacture 2023 Goudsmit magnetics magnetic separator 2 screw conveyors 400 Volt Documentation available This lot extends from the 1st to the 2nd floor, up to the 1st ring above the Y-junction (rotary airlock not included) Dimensions of the upper part: approx. ø 220 cm Dimensions of the lower part: approx. 310x290x300 cm Mixing system with a round mixing tank, horizontal mixing unit, and multiple electric motors. Details: Configuration: round mixing tank on a frame with a horizontal mixing unit Drive: multiple electric motors Included: piping and fittings Material: metal, partially stainless steel Fgodez Ipplopfx Aivjh Condition: used

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: FN556243, Year of construction: 2017, operating hours: 8,754 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,190 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,700 mm Free lift: 1,600 mm Overall height: 2,190 mm Load capacity: 3,000 kg MACHINE DETAILS Mast type: Triplex Vehicle type: Electric 4-wheel forklift ISO class: ISO Class 3 = 2,500–4,999 kg Battery voltage: 12 V Battery year of manufacture: 2017 Fjdpez I R I Ajfx Aivsgh Unladen weight without battery: 3,537 kg Operating hours: 8,754 h EQUIPMENT Side shifter Fork positioner 3rd valve 4th valve External reference: SL8945SP

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Fodpfxoz Iwnps Aivsgh Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: new, mileage: 420 km, power: 375 kW (509.86 HP), axle configuration: 6x2, color: green, driver cabin: day cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, = Further options and accessories = - Brake system Fgsdpjyfqvfefx Aivsh = Notes = Arocs 2751 6x2 HAD - pre-equipped for forestry crane operation!! Front axle 9.0 t, Hydraulic Auxiliary Drive (HAD), rear axle 13.4 t, steering and liftable trailing axle 8.0 t, electronic brake system with ABS and ASR, retarder, two-line trailer brake, wheelbase 4,800 mm, stabilizer on front axle, extendable rear underrun protection, front underrun protection, compressed air connection in cab, air-suspended driver’s comfort swing seat, functional passenger seat, air conditioning, transparent external sun visor, comfort steel-spring cab suspension, M-Cab ClassicSpace, reinforced end cross member, interactive multimedia cockpit, navigation system, LED fog lights, construction rear lights, 2 low LED revolving beacons, body: Hyva-Lift roll-off tipper 20-60 Titan, hook height: 1,570 mm, container length: 4,500 mm to 7,000 mm, lifting force: 200 kN, container with crane platform, capacity: approx. 30 cbm, container length 7,000 mm, recessed hook, foldable protection roof 2,000 mm with hand pump, crane: Epsilon Q150L, crane cabin available on request, length: 9.7 m Application area: Processing and transport of cut material. We will be happy to provide you with a leasing or financing offer from Mercedes-Benz Bank on request. Mr. Ebert and Mr. Seidel (Tel. ...) will be pleased to assist you. For further information, please visit our homepage. !Subject to changes, errors, and prior sale! ESP, navigation system Cabin: Local traffic = Further information = Engine displacement: 12,809 cc Please contact Tobias Ebert for further information.

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, clearing needle, push clearing needle -Quantity: 2 pieces still available -Keyway width: 10 mm -Type: see photos -Submission/Price: complete Fgodpfxjzlgb No Aivsh -Transport dimensions: 1085/33/H32 mm -Weight: 4.5 kg

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Fgsdpfsz Ebzhsx Aiveh Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: used, Year of construction: 1999, machine/vehicle number: 17, No minimum price – guaranteed sale to the highest bidder! The machines are still assembled, but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a vertical internal stripping machine manufactured by FORST, model: RISH 6.3 x 1000xx 320 M. TECHNICAL DETAILS Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Control voltage: 230/240 V AC Fodpezy Ulrefx Aivegh Control frequency: 50 Hz Control current: 6.3 A Machine rated current: 180 A

Condition: new, axle configuration: 2 axles, Equipment: ABS, Multiple units available, ABS, 10-ton axles Top German brand, 275/70R22.5 tires, air suspension, centrally closed frame with checker plate, mudguards, side underrun protection, 2 x EXTE D5 bolsters (optionally also without bolsters or with 4 EXTE bolsters or 6 EXTE bolsters), 4 x EXTE C5 stanchions, unladen weight with 2 bolsters approx. 3,400 kg. Vehicle price without bolsters: €26,990 net Vehicle price with 2 EXTE bolsters: €30,690 net Vehicle price with 4 EXTE bolsters: €34,390 net Vehicle price with 6 EXTE bolsters: €38,090 net Leasing or financing offers available on request. Mr. Ebert (Tel. ...) is happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale! = Further information = Fedpfx Aeygch Asivegh Usable material: Wood Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for further information.

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Fgjdpfx Aolcdf Deivoh

Condition: used, Year of construction: 2000, Technical details: pulling force - max.: 2,5 t max. ram stroke: 1000 mm max. workpiece diameter: 40 mm Broaching speed: 60 m/min. return speed: 20 m/min. total power requirement: 24 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 1,7 x 2,4 x 4,77 m clamping plate: 320 mm Fgsdjw Dugaopfx Aivjh It is a hydraulic machine. *

Condition: new, axle configuration: 2 axles, Equipment: ABS, Multiple units available, ABS, 10-ton axles. Premium German brand manufacturer. Tires: 275/70R22.5, air suspension, centrally closed frame with checker plate, mudguards, lateral underride protection, 2 x EXTE D5 bolsters (available without bolsters upon request; 4 or 6 EXTE bolsters also possible), 4 x EXTE C5 stakes. Unladen weight with 2 bolsters approx. 3,200 kg. Vehicle price without bolsters: €26,490 net Vehicle price with 2 EXTE bolsters: €30,190 net Vehicle price with 4 EXTE bolsters: €33,890 net Fjdpfeygchvox Aivegh Vehicle price with 6 EXTE bolsters: €37,590 net Leasing or financing offers available upon request. Mr. Ebert (tel.) will be happy to assist you. More information can be found on our homepage. Subject to prior sale and errors! = Further information = Usable material: Wood Gross vehicle weight: 18,000 kg Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2004, machine/vehicle number: 0-240-14-3077, functionality: fully functional, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, saw blade diameter: 450 mm, height adjustment type: electric, saw blade bore: 60 mm, actuation type: electric, rotational speed (max.): 4,500 rpm, rotational speed (min.): 3,800 rpm, total length: 10,216 mm, total width: 7,470 mm, total height: 2,200 mm, overall weight: 15,000 kg, table height: 1,020 mm, Equipment: CE marking, saw blade guard, scorer, For sale is a professional, industrial panel dividing saw from the premium manufacturer HOLZMA, from the high-performance 510 series. The system is of German manufacture ("Made in Germany") and is specifically designed for tear-free and dimensionally accurate cutting of large quantities of panels in an industrial multi-shift operation. As an HPL version, this system features fully automatic material feeding from the rear via a heavy-duty lifting platform, which minimizes cycle times and maximizes operator ergonomics. Technical data according to specification (HPL 510/43/22/L/D/X) Manufacturer: HOLZMA Maschinenbau GmbH Exact model designation: HPL 510 / 43 / 22 / L / D / X Fedpezilz Nsfx Aivsgh Cutting length (code 43): max. 4,300 mm Table width (code 22): max. 2,200 mm Saw blade overhang: 125 mm Main saw blade diameter: max. 450 mm Working height (table height): approx. 1,020 mm (adjustable via leveling feet) Overall height: approx. 2,100 – 2,200 mm (depending on terminal configuration) Control & Clamping System Machine control: Equipped with the proven, IPC-based high-performance control system HOLZMA CADmatic 4. This offers intuitive operation via graphic displays, plain-text error diagnoses, and an optimized cutting sequence visualization. Material clamps: The program slider is equipped as standard with 9 robust, two-finger HOLZMA clamps for gentle and highly precise package fixing. Electrical connection values & energy Operating voltage: 400 V (three-phase / three-phase AC) Mains type: 3~ + N Frequency: 50 Hz Rated current: 52 A Required fuse rating: 63 A, slow-blow Control voltage: 24 V Equipment and functional features Automatic cutting height control: The saw carriage automatically adjusts the overhang of the main saw motor (13.5 kW) and the scoring unit (2.2 kW) to the measured package height. Intelligent pressure beam (pneumatic): Variable opening height for a significant reduction in idle times between cuts. Heavy-duty lifting table feeding ("L"): Robust 4-column feeding system at the rear, designed for smooth handling of heavy panel stacks. Equipment packages ("D" & "X"): Extended machine equipment for optimized material flow, precise package stop, and high-performance cutting cycles. Important logistics and sales information Condition & Packaging: The machine has already been professionally dismantled and is completely packed, ready for loading. The professional transport securing of all sensitive axes, linear guides, and control components has been carried out in accordance with the manufacturer's specifications. Cost assumption: The loading and transport costs are not included in the purchase price and must be borne entirely by the buyer. Recommendations for local crane and transport services can be requested from us. We will assist with the collection as much as possible.

Condition: good (used), functionality: fully functional, power: 75 kW (101.97 HP), gearing type: automatic, fuel type: gasoline, first registration: 04/2025, next inspection (TÜV): 04/2027, color: grey, front tire size: 205/75 R 14, rear tire size: 255/60 R 14, machine/vehicle number: 3JB3PA768SJ001247, Equipment: lighting, trailer coupling, our vehicle number #31076 Fsdpfx Aiez I Rpajvjgh ATTENTION: Sale only to commercial customers!!! Euro V 102 hp 4x4 Tire sizes A1 205/75 R 14 and A2 255/60 R 14 Permissible total weight 788 kg Payload 225 kg Unladen weight 563 kg Tank capacity 19 liters Color: Mineral Grey/Orange Aluminum rims Differential lock CVT transmission with pDrive primary clutch Disc brake HD3500 winch Passenger seat Skid plate full set CanAm Integrated heated grips LED light bar Footrest kit G3 LinQ front luggage rack SP Connect cell phone holder incl. charging cable Digital onboard computer Front/rear bumper guards Trailer hitch ball head Three-stage dynamic power steering (DPS) Modes: Work / Standard / Sport Intelligent engine braking (iEB) 7.6-inch wide digital display Financing possible upon request!!!