Used Dukane 20Hb260-2P-C3 for sale (1,754)

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Lhsdpfext E A Iex Abyjn -Manufacturer: Dukane, iQ Aim ultrasonic generator -Type: 20HB260-2P-C3 -Number: 12x generator available -Price: per piece -Dimensions: 430/265/H140 mm -Weight: 12.2 kg/pc.

Year of construction: 1999, condition: ready for operation (used), X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible. Ljdsw U Uatopfx Abyshn

Condition: new, Frequency converter Manufacturer: Danfoss Typ: VLT Automation Drive - FC-302P1K5T5E20H1 Max. Power: 1,5 kW Ljdohqhx Tepfx Abyjhn Input: 3x380-500V, 50/60 HZ, 3.7/3.1 A Output: 0-100 HZ, 4.1/3.4 A

Condition: new, Frequency converter VLT Automation Drive Manufacturer: Danfoss Typ: FC-302P3K0T5E20H1B Lhodpshqh Hpjfx Abyjn Input: 3x380-500 V, 50/60HZ, 6.5/5.7A Output: 0-590HZ, 7.2/6.3A

Condition: used, mileage: 125,000 km, fuel type: diesel, Year of construction: 2022, CITROEN C3 Year 2022, 1.5 diesel engine, 2 seats, light commercial vehicle, 4 doors, 125,000 km, air conditioning, factory stereo, one owner, 1-year warranty. Financing or leasing available on site. Price excludes VAT. Lhodsy An Alopfx Abyen

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Ledpfx As Adtqlsbyehn

Condition: used, mileage: 47,830 km, power: 206 kW (280.08 HP), first registration: 08/2003, fuel type: diesel, overall weight: 14,500 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total length: 10,000 mm, total width: 2,350 mm, total height: 3,300 mm, Year of construction: 2003, Equipment: ABS, air conditioning, compressor, MAN LE 14.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ---- First registration: 05.08.2003 Mileage: 47,826 km Operating hours of the ladder superstructure: 1,608 hours Operating hours of the vehicle: 2,150 hours Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4500 mm * Permissible gross vehicle weight: 14.5 t * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 l, right side * Adjustable steering wheel * Axle ratio i = 5.86 * Differential lock in rear axle * Medium-length cab * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat bench - manufacturer: GRAMMER * Air conditioning R134A * Exhaust pipe with tailpipe on the left * Auxiliary starter system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control Lhjdpfxszw R Sij Abysn * Stabilizers for front and rear axles * Headrests for driver and passenger * Cab rear wall with 3 windows * Heated and electrically adjustable exterior mirrors * Wide-angle mirror on the right, heated * Curb mirror on the right, heated and electrically adjustable * Electric windows on the left and right * 4-wheel parking brake (also on the front axle) * Tire chains on the rear axle * Winter tires 10R22.5 Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 PLCIII with rescue platform (rescue height approx. 30.75m). Max. outreach angle: 75 degrees, max. platform load capacity: 270 kg, nominal rescue height: 23 m, nominal outreach: 12 m, outriggers: horizontal-vertical, variable outrigger width between 2,400 mm and 4,500 mm * Rotating beacon lights at the front and rear * Front and rear flashing lights * Air horn * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue basket stretcher, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with shut-off valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the crew * Load eye on the lower ladder, loadable up to 4,000 kg * Load eye on the basket segment (between ladder tip and rescue platform) for attaching a lowering device, 270 kg/400 kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * 2 spotlights on the basket * Permanently installed battery charger Waeco PerfectCharge IU154A * Complete service booklet available, all maintenance performed annually Upon request and for an additional charge, a new 20-year inspection can be carried out, including hose replacement and inspection! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also WhatsApp Email: Subject to changes, prior sale and errors!

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 480 h, control type: CNC control, degree of automation: semi-automatic, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MFMC-6000W_ Pro-BKW1.0, laser hours: 480 h, laser power: 6,000 W, laser wavelength: 1,000 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, table length: 3,106 mm, table width: 1,582 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 100 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 100 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, workpiece weight (max.): 900 kg, input voltage: 400 V, input current: 33 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 11,800 kg, total length: 1,560 mm, total width: 5,900 mm, total height: 2,745 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, 2023 DNE LC3 3015 6kW Fibre Laser Cutting Machine - FAST SALE WANTED Used 2023 DNE LC3 3015 6kW CNC Fibre Laser Cutting Machine for Sale – 3000 x 1500mm – MAX Photonics 6000W Laser Source – Pallet Change Table Machine Manufacturer: DNE Model: LC 3 6000 Machine Type: Fiber Laser Cutting Machine Capacity: 3000 x 1500mm Year: 2023 Control: CNC Condition: Excellent Condition Price: Includes Decommissioning & Loading Built as part of the DNE/Bystronic fibre laser range, the LC3 combines high cutting speeds, straightforward operation and relatively low running costs compared with traditional CO2 laser cutting systems. Main Specifications Manufacturer: DNE Model: LC3 3015 Year: 2023 Machine Type: CNC Fibre Laser Cutting Machine Laser Power: 6kW / 6,000W Laser Source: MAX Photonics Fibre Laser Nominal Sheet Size: 3,000 x 1,500mm Approx. Cutting Area: 3,106 x 1,582mm Z-Axis Travel: Approx. 100mm Maximum Sheet Weight: Approx. 900kg Laser Source The machine is fitted with a: MAX Photonics 6kW / 6000W Fibre Laser Source MAX Photonics fibre laser technology is widely used in industrial sheet-metal cutting applications and offers efficient cutting with relatively low maintenance requirements. The 6kW power level provides a good balance between high-speed thin-sheet cutting and the ability to process heavier plate. Approximate Cutting Capacities Depending on material grade, assist gas, nozzle arrangement and cutting parameters, published capacities for the 6kW LC3 include approximately: Mild Steel: Up to 20mm Stainless Steel: Up to 20mm Aluminium: Up to 20mm Brass: Up to 10mm Copper: Up to 10mm Actual production cutting capacity, speed and edge quality will depend on the material specification and cutting parameters being used. Ledjz D D N Ejpfx Abyohn Machine Performance Maximum X/Y Positioning Speed: Approx. 100m/min Maximum Simultaneous Positioning Speed: Approx. 140m/min Position Repeatability: Approx. 0.05mm Average Bilateral Position Deviation: Approx. 0.10mm Edge Detection Accuracy: Approx. ±0.5mm These characteristics make the LC3 suitable for both high-speed thin-sheet work and general production fabrication. Shuttle / Pallet Table System The DNE LC3 is designed with a sheet handling arrangement intended to minimise non-cutting time between jobs. Approximate Table Change Time: 24 seconds The rapid table exchange system allows the next sheet to be prepared while the machine is cutting, improving overall machine utilisation. Approximate Machine Dimensions Overall Length: Approx. 10,561mm Overall Width: Approx. 5,903mm Overall Height: Approx. 2,744mm Approximate Machine Weight: 11,800kg Transport dimensions and lifting requirements should be confirmed prior to collection. Please Note All specifications, cutting capacities, dimensions, weights and machine details quoted above are approximate and are provided for guidance only. Actual cutting performance will depend on material grade, assist gas, nozzle configuration, machine condition and cutting parameters. Prospective purchasers should verify all important specifications and operating requirements prior to purchase.

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Hole diameter: 6-40 Lhodpfsz Ihfxsx Abyen Working height: 600 ±50 mm Power: 22 kW

Condition: used, mileage: 85,528 km, power: 206 kW (280.08 HP), first registration: 12/2004, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: red, gearing type: automatic, emission class: euro3, total width: 2,500 mm, total height: 3,290 mm, Year of construction: 2004, Equipment: ABS, compressor, MAN LE 15.280 with METZ DLK 23-12 PLC 3.2 L32 aerial ladder, in immediately operational condition. ----Equipment of the base vehicle: * Suspension type: leaf spring/leaf spring * Wheelbase: 4575 mm * Permissible gross weight: 15 tons * Automatic transmission ZF 5 HP 590 with retarder * Fuel tank: 125 liters, right side * Adjustable steering wheel * Axle ratio i = 4.62 * Differential lock in rear axle * Cab: medium length * Driver's comfort seat with lumbar support - manufacturer: GRAMMER * Passenger seat - manufacturer: GRAMMER * Exhaust pipe for fire department * Quick start system * Anti-lock braking system (ABS) * Traction control system * Disc brake for front axle * Armrests on both doors * Additional long-range and fog lights * Hour meter * Cruise control * Radio MAN CD 24V * Stabilizers for front and rear axle * Headrests for driver and passenger * Cab rear wall with 2 narrow windows, left and right * Heated and electrically adjustable rearview mirrors Lhjdpfx Ajxa Sbqjbyen * Wide-angle mirrors, left and right, heated * Curb mirror, right, heated and electrically adjustable * Electric windows, left and right * 4-wheel parking brake * Snow chains on the rear axle * Winter tires Equipment of the aerial ladder superstructure: * Superstructure: Metz aerial ladder DLK 23-12 L32 CAN with rescue platform (rescue height approx. 30.75m) Max. outrigger angle: 75 degrees, max. platform load capacity: 270kg, nominal rescue height: 23m, nominal outreach: 12m, outriggers: horizontal-vertical, variable outrigger width between 2,400mm and 4,500mm * Special signal system * Front flashing light * Siren * Stretcher storage for accommodating a DIN stretcher, including conversion for accommodating a rescue sled, load capacity up to 150 kg * Permanently installed 230V power supply to the rescue platform, 2 Schuko sockets in the rescue platform * Permanently installed water supply line in the upper part of the ladder with slide valve and B-Storz couplings * 3 anchor points in the rescue platform for securing the platform crew * Load eye on the lower ladder, loadable with up to 4,000 kg * Load eye on the boom segment (between ladder tip and rescue platform) for attaching a lowering device, 270kg/400kg payload * LED ambient lighting on the undercarriage * XXL platform on the turntable for accommodating a DIN generator, ventilation unit, traffic cones, etc. * 2 adjustable spotlights at the end of the lower ladder, operable from the main control panel * Complete service history available, all maintenance performed annually. Upon request and for an additional charge, a new 20-year service including hose replacement and inspection is possible! ----Immediately operational vehicle in well-maintained condition, both inside and out! Non-smoking vehicle! Your contact person for this vehicle: ---- Daniel Seidler Tel: Mobile: also Whatsapp Email: Subject to changes, prior sale and errors!

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Lsdpfx Asznbqqebyshn

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Lodpfx Abszna T Royohn

Condition: good (used), Year of construction: 1999, For sale is a used Hammer C3-31 Trend 4-in-1 combination machine with a cutting length of 1250 mm. The machine has been inspected and refurbished by our service team. Technical data: - Cutting length 1250 mm - Cutting height 103 mm - 3 milling speeds - 3 system cutterhead shafts - Planing width 310 mm - Max. passage height 230 mm - 3 motors, each 3 kW / 4.1 hp - Year of manufacture 1999 Lhodpfsz Sthujx Abyon The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-J0001

Condition: good (used), Year of construction: 1986, functionality: fully functional, Machine Name - Benelli 1000 Tonne press Machine Model - Automatic transfer press PMT/3d/1000/5/1000P Y.O.M 1986 (Retro-fitted 2015 by Helm) Description - 1000 ton SPM up to 26 Number of operational positions: 5 Press bed 5000mm x 2000mm Main carriage 5100mm x 1400mm second carriage Lateral opening between columns: 2500 mm Voltage power supply: 415V; 50 Hz Shut height range 730mm- 1070 Light guards Schlechier decolier : Ledpfx Aez Nhx Aebyjhn Coils up to 10ton and 1.2m wide, ID 500mm OD 1500mm Can be seen underpower from site.

Condition: like new (used), Year of construction: 2023, Haas TM2-P Year: 2023 X-1016, Y-406, Z-406 RPM: 6,000 BT 40 WIPS Ljdozua Hwepfx Abyshn HSM 4th axis connection Very few operating hours Like new!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 5,000 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: Maxphotonic, laser power: 6,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 5 mm, table length: 3,000 mm, table width: 1,500 mm, table height: 900 mm, working length: 3,050 mm, working width: 1,530 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 300 mm, cutting speed: 60 mm/min, repeat accuracy: 0.05 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, Used fully closed laser cuting machine with 2 tables size 3000 x1500 mm. automatic table exchange Cutting Head Bodor /6kW Lhjdpfxeyzzw He Abyon

Year of construction: 2023, condition: excellent (used), For sale: Friul Co C3 Dough Mixer and Kneader – 2023 model, like new We are selling a Friul Co C3 industrial dough mixer and kneader in excellent technical and cosmetic condition. This machine is ideal for bakeries, pizzerias, pasta factories, and artisanal bakeries where fast, consistent, and reliable dough processing is essential. Technical specifications: Manufacturer: Friul Co Srl (Italy) Model: C3 Year of manufacture: 2023 Power supply: 230 V Power: 1840 W Single-phase version IP54 protection Stainless steel construction Ljdpfx Aezrnd Eebyehn Movable, lockable wheels Key benefits: ✅ Mixing and kneading in one machine ✅ Consistent dough processing, excellent end result ✅ Easy to operate and clean ✅ Robust, industrial design ✅ Reliable Italian manufacturing ✅ 2023 model, modern design The machine is perfectly suited for processing bread, pastry, pizza, and other yeast-leavened doughs. The automatic operation significantly reduces the need for manual labor and increases productivity. The machine is in like-new condition (approximately 5 hours of use). For more information or to schedule an appointment, please do not hesitate to contact us!

Condition: good (used), Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator Lhodpoxt E Htefx Abyen -Manufacturer: Dukane, iQ Port Probe Switch -Type: MPCQH0402 -Number: 7x Port Probe Switch available -Price: per piece -Dimensions: 240/145/H45 mm / 240/180/H50 mm -Weight: 1.2 kg / 1.4 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92420 353324 -Horn: Type CTC205708 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg Lsdpfx Abeyxm Ixjyshn

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit Lhsdoyxm Raepfx Abyen -Welding converter: Type 41B30 92420 353324 -Horn: Type 2.0 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H120 mm -Weight: 6.1 kg

Condition: used, empty load weight: 6,600 kg, maximum load weight: 29,400 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/1993, loading space volume: 43 m³, suspension: air, tire size: 385 / 65 R 22,5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, air-suspended, 1st axle liftable, last axle self-steering, ABS (anti-lock braking system) Body: Udder silo 43m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Ljdpfevhg A Nex Abyehn

Condition: like new (used), Year of construction: 2019, operating hours: 180 h, functionality: fully functional, total length: 8,000 mm, total width: 1,200 mm, total height: 1,300 mm, type of input current: AC, input voltage: 400 V, power: 10 kW (13.60 HP), SOEST Universal Surface Line for oiling, staining, lye treatment, patination, etc. Primarily intended for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two pad holders, and an additional two brushes, for distributing, working in, or patinating surface media in the pores and/or also for removing, distributing, and working in depending on the desired surface effects. 3) Accessories include two spare application rollers, a material pump (brand new, never used), four replacement brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface finishing line is built for professional industrial use and is configured with a full set of equipment. A considerable amount of accessories for the system, such as extra rollers and cleaning machines, is also included (see photos!). Very robust construction, all motors frequency-controlled (Siemens). Speeds are steplessly adjustable for both forward and reverse operation. Maximum workpiece width is approx. 410 mm. The system is in very good condition, with little use—only approx. 180 operating hours—so it can be described as as-new. This surface processing line was only used as a backup line in parquet production and only for specific surface techniques, which explains the low operating hours (used sporadically from 2019 to 2022). In 2023, our company downsized and the system has been stored ever since or is immediately available, and therefore remains in nearly brand-new condition! This system is no longer used in our facility and is therefore being sold. The new price for this line was approx. €87,000 in 2019; the current selling price is negotiable! Inspection of this surface line is possible by appointment. If required, we can also offer 10 drying rack trolleys for sale with this system. Lhsdeyaiafjpfx Abysn (The YouTube video serves only as an example video of a similar system configuration!)

Year of construction: 1989, condition: not inspected (used), Industrial twin-shaft shredder C3 VKF-250 (Industrial twin-shaft shredder C3 VKF-250 from the manufacturer Přerovské strojírny ČR) Technical specifications: • Type: C3 VKF-250 • Manufacturer: Přerovské strojírny • Year of manufacture: 1989 • Drive: 2 x electric motor with gearbox (engine power 22.5 kW) • Power supply: 3 x 400 V • Machine location: Papir-Novak s.r.o. – Czech Republic Machine application: Ledpfx Abezt Hmzeyehn primarily for processing: • plastic waste, • wood, • paper and cardboard, • textiles, • cables, • light industrial and recyclable waste. Machine condition: • mechanically complete, • equipped with two electric motors with gearboxes, • control panel (distributor) missing, • functionality has not been verified – the machine has not been tested, • stored in a warehouse for an extended period, • the machine is suitable for reconditioning, commissioning, or as a source of spare parts.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 353599 -Horn: Type CTC2058800 Ledpfxsxrzwrj Abyjhn -Ultrasonic sonotrode: Number: 7x ultrasound transducer units available Price: per piece -Dimensions: 450/110/H120 mm -Weight: 6.1 kg/pc.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode Lhodpfx Ajxywi Tebysn -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 93420 356075 -Horn: Type CTC205782 -Ultrasonic sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg