Used Dmg Mori Dmu 85 Monoblock for sale (4,680)

Condition: good (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: 840 D solutionline, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Manufacturer: DMG MORI Pfronten Model: DMC 85 monoBLOCK RS3 Year of manufacture: 2014 Control system: Siemens 840D solutionline Shopmill Approx. 22,500 program hours Main spindle Interface: SK40 DIN 69871 Speed: 20-14,000 /min Spindle replaced by DMG MORI approximately one year ago Tool changer Type: Double gripper with three-phase motor Magazine: 60 positions X: 935 mm Ppsdpfx Alozamn Ts Nou Y: 850 mm Z: 650 mm A: +/- 120° C: 360,000 * 0.001, continuous 5-axis simultaneous machining: YES Automation: DMG MORI RS3 Number of pallets in the system: 3 Additional pallets: 2 Equipment 3D measuring probe Operating mode 4 Extraction system IKZ 40 bar with belt filter system Chip conveyor Coolant gun Hydraulic clamping system Media feedthrough through the pallet WITHOUT the clamping devices and tool holders shown in the images!

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm total power requirement --- kW Psdozhchkjpfx Al Nepu weight of the machine ca. 6,8 t dimensions of the machine ca. --- m

Condition: ready for operation (used), Year of construction: 2016, operating hours: 1,963 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D sl Operate, overall weight: 11,800 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 21,000 W, number of axes: 5, This 5-axis DMG MORI DMU 65 monoBLOCK was manufactured in 2016. It features an impressive X-axis travel of 735 mm, Y-axis travel of 650 mm, and Z-axis travel of 560 mm. The machine is equipped with a powerful spindle speed of 15,000 rpm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Spindle: power 21 kW (40% ED) / 16 kW (100% ED); torque 111 Nm (40% ED); pull stud DIN 69872 • Table: Rotary table (C-axis) Ø650 mm integrated in rigid table 800 x 650 mm • Swivel/rotary axes: A-axis +120° / -120° from 0°; C-axis 360°; A-axis torque/holding 3,400 Nm (100% ED); A-axis hydraulic clamping holding torque 6,200 Nm; C-axis torque/holding 2,000 Nm (100% ED) • Feed/rapid: Rapid traverse X/Y/Z 40 m/min; max feed X/Y/Z 40,000 mm/min; max feed force X 7 kN, Y 13 kN, Z 10 kN (all 100% ED) • Guideways: Roller linear guides on all linear axes • Measuring system: Direct, absolute, 0.001 mm resolution, magnetic (for Siemens) • Control: CELOS with Siemens 840D sl Operate, 21.5" ERGOline multi-touch Psdpfx Ajzd T Sfel Nepu • Tool changer/magazine: Automatic with double gripper (vertical); 30-position HSK-A 63 chain magazine • Coolant/swarf standard: Chip tray with integrated 500 L tank; standard swarf management via chip tray • Condition: Excellent; only 1,963 spindle hours (machine was used only for making of prototypes) Additional equipment • Production package (P-K0398): Chip conveyor with coolant tank, paper band filter, internal coolant through spindle (IKZ) 40 bar / 23 l/min, external coolant 4 bar / 40 l/min, door flushing • Tool interface (P-M0039): Tool taper adaptation for HSK-A63 (DIN 69893) • Swarf wash pistol (P-G0004): 2 bar / 40 l/min • Measuring probe (P-K0263): Heidenhain TS 649 infrared touch probe • Tool measuring system (P-K0405): Blum laser for vertical tool length and diameter measurement • Kinematics option (P-K0224): 3D quickSET toolkit for checking/correcting 4/5-axis configuration • Operation Mode 4 (P-H0038): Manual intervention in work area with open doors under controlled process • Electronic handwheel (P-H0109): Siemens 840D • Tooling included Technical Specification Taper Size HSK 63 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 18,000 rpm, travel distance X-axis: 750 mm, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Haidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. • Measuring probe: 3D measuring probe from Heidenhain, TS649, HSK mount • High-pressure pump for internal coolant supply: 20 bar • Siemens control: SINUMERIK 840D Solutionline (Operate) • CELOS • Coolant tank with treatment and cooling system • Chip conveyor • Magazine positions: 60 Ppsdszdzmwepfx Al Nsu Technical Specification Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2012, operating hours: 10,600 h, 5-axis machining center Brand: DMG MORI Type: DMU 80 Monoblock Year: 2012 (spindle hours: 10,600) CNC: Heidenhain iTNC 530 Equipped with: Integrated rotary table, dia. 700 mm / 650 kg 29 kW spindle – 12,000 rpm 32-position tool changer TS 649 touch probe 3D quickset 40 bar central coolant system BLUM laser tool probe Coolant gun Chip conveyor Specifications: Table surface 1250 x 700 mm X-axis travel 880 mm Y-axis travel 630 mm Z-axis travel 635 mm B-axis -120/+30° C-axis 360,000° Spindle speed 20 - 12,000 rpm Spindle power 29 KW Spindle taper SK 40 Rapid traverse XYZ 42 m/min Machine dimensions with chip conveyor 3440 x 2850 x H 2750 mm Approximate weight 7,480 kg Podpfxozgbv De Al Njpu

Condition: used, Year of construction: 2013, x-travel 1.135 mm y-travel 1.050 mm z-travel 750 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 14.000 min/-1 power capacity - main spindel 19 kW max. Torque 100 Nm tool taper HSK-A 63 table surface area 1.400 x 1.050 mm max. table load 2.500 kg max. workpiece sizes 1.400 x 1.240 mm max. workpiece height 750 mm number of toolpositions 30 pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 365 / 395 mm max. tool weight 8,0 kg change-time chip to chip 6,1 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min Accelaration 6 m/s² Feed force ( X / Y / Z ) 14 / 20 / 14 kN total power requirement 44 kVA weight of the machine ca. 14,4 t dimensions of the machine ca. 6,0 x 5,0 x 3,3 m CNC - MachiningCenter Vertical DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518 h - Production package: (Chip conveyor, 600 l coolant system, paper belt filter, Ppsdpfeyztyaex Al Nsu internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Condition: ready for operation (used), Year of construction: 2010, operating hours: 8,510 h, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D solutionline, spindle speed (max.): 18,000 rpm, spindle motor power: 15,000 W, number of axes: 5, This 5-axis DMG MORI DMU 60 monoBLOCK was manufactured in 2010. It features a working area of 730 mm x 560 mm x 560 mm and a rigid table size of 1,000 mm x 600 mm. The machine is equipped with a motor spindle capable of 18,000 rpm and includes a controlled NC swivelling milling head. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 60 monoBLOCK vertical machining centre we have for sale. Contact us for further details. • Swivelling milling head: Controlled NC B-axis with hydraulic clamping • Spindle offset: 100 mm • Swivelling range: -120° / +30° (X-axis travel reduced by 100 mm) • Tool changer: Pick-up system, 24 magazine positions • Table: Rigid, 1,000 mm x 600 mm • Control: Siemens 840D solutionline • 3D path control • 3D machining, 3D tool correction • TRANSMIT lateral surface transformation (milling of cylindrical paths - TRACYL) • CompCad compressor function for high-speed machining • Operating mode 4 (manual intervention with doors open) • Probing and calibration: • 3D measuring probe • 3D quickSET toolkit for checking/correcting 5-axis kinematic accuracy • Running time: 30,106 hours (spindle: 8,510 hours) Psdpfxoy Ndklo Al Nepu • Note: Soft key buttons on the screen sometimes fail; operation may require the machine’s mouse pad or an external keyboard. Additional equipment • Chip conveyor • Optional: 125 SK40 tool holders Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2010, operating hours: 7,186 h, controller manufacturer: HEIDENHAIN, controller model: ITNC530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis DMG MORI DMU 60 MonoBlock was manufactured in 2010. It features a 60-tool automatic tool changer, a maximum spindle speed of 12,000 RPM, and SK40 tool holder. Additional features include a Heidenhain TS649 probe, 3D quickSET, and 40 bar through-spindle coolant. Ideal for complex and precise machining tasks. Located in Iceland, contact us for more information about this machine. Ppedpfx Asx D Iirsl Nou • Through-spindle coolant: 40 bar • Spray gun • Electronic handwheel • BA4 mode Additional equipment • Heidenhain TS649 touch probe • 3D quickSET (calibration/checking system) Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: Ppodpoyz Si Tofx Al Nou X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: DMC 65 monoBlock with RS 3 Automation Year of manufacture: 2018 Control system: Heidenhain TNC 640 Technical specifications: Travel paths: x-axis: 735 mm y-axis: 650 mm z-axis: 560 mm Main spindle: Speed range: 0 – 15,000 rpm Drive power – main spindle (100/40%): 21 / 16 kW Table dimensions: Pallet size: 500 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Operating hours: approx. 61,000 h Spindle hours: approx. 19,900 h Technical features & equipment: - Vertical spindle head - ICS, 40 bar - NC rotary tilting table with pallet carrier Pedpfx Ajyzz Ewsl Nspu - 3 pallets - Linear pallet changer, DMG Mori RPS 3 - Coolant system, 500 l tank - Chip flushing in the work area door - Chip conveyor with integrated band filter - Coolant ring nozzle - Rinsing gun with pump, 2 bar / 40 l/min - Air blast cooling through spindle center - 3D quickSET expansion package - Operating mode 4 - Electronic handwheel Accessories, depicted tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2014, DMG MORI DMU 50 Technical Features of this 5-axis machining center Manufacturer: DMG Model: DMU-50 Year: 2014 3D CNC Control: HEIDENHAIN ITNC530 SMART NC Screen Type: DMG ERGOLINE® CONTROL 19” NC Swivel Rotary Table Simultaneous: INCLUDED Table Surface: 630×500 mm Max Weight Allowed on Table: 250 kg / pallet Turning Table (C Axis): 0.001º (±360º) Ppjdpfjy Smynsx Al Nou Axis: Longitudinal Traverse (X Axis): 500 mm Cross Traverse (Y Axis): 450 mm Vertical Traverse (Z Axis): 400 mm Rapid Feed (X/Y/Z Axis): 42,000 mm/min Working Feed (X/Y/Z Axis): 10,000 mm/min Tilting Range (B Axis): -5º/+110º Spindle: Spindle Speed: 10,000 r.p.m. Taper: SK40-DIN 69871 Main Motor Power: 25 kW Automatic Tool Changer (ATC): ATC Positions: 60 Max Tool Length: 300 mm Equipment: Chip Conveyor: INCLUDED Active Control Cabinet Cooling: INCLUDED Tool Touch Probe: INCLUDED Direct Measuring System: INCLUDED Flushing Gun: INCLUDED Portable Handwheel: INCLUDED Suction System: INCLUDED Internal Coolant: INCLUDED Coolant Deposit with Paper Filter: INCLUDED Others: Machine Dimensions (L x W x H): 5,100 × 3,200 × 2,750 mm Total Power: 27 kVA Machine Weight: 4,500 kg Price on request

Condition: used, Year of construction: 2013, x-travel 500 mm y-travel 450 mm Ppsdpjzhchqofx Al Nju z-travel 400 mm total power requirement --- kW weight of the machine ca. 4,5 t dimensions of the machine ca. --- m

Condition: excellent (used), Year of construction: 2017, operating hours: 47,000 h, functionality: fully functional, DMG MORI DMU 60 eVo, year of manufacture 2017 5-axis universal machining center in very good condition Technical data / equipment: Manufacturer: DMG MORI Type: DMU 60 eVo Year of manufacture: 2017 Control system: Heidenhain TNC 640 User interface: ERGOline Control with 19" screen Ppjdezhit Hspfx Al Nsu Travel ranges: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm Spindle: speedMASTER motor spindle Tool interface: SK 40 / BIG-PLUS Speed: 18,000 rpm Power: 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Air blow-through through spindle center NC rotary table: Clamping surface: 600 x 500 mm B-axis: -5° to +110° C-axis: 360° Max. table load: 400 kg Direct measuring systems Table cooling Tool magazine: 120 tool positions Chain magazine with dual gripper Cooling / chip removal: Internal coolant supply (ICS) 40 bar / 23 l/min 600 liter tank Paper band filter Extended chip flushing Scraper conveyor Bed flushing Flushing gun Rotating viewing window Oil and emulsion mist separator Measuring and monitoring systems: Renishaw OMP60 measuring probe Tool breakage detection TRS2 3D quickSET preparation Process monitoring operating mode 4 Electronic handwheel Signal light, four-color DMG MORI Messenger DMG MORI Netservice Client Automation / preparation: Preparation for EROWA handling system M65 interface Extended M65 interface for EROWA Job Management System Operating hours according to current geometry protocol: approx. 47,589 h Spindle hours according to current geometry protocol: approx. 28,638 h Current geometry protocol dated 08.12.2025 available. The machine's geometry is in very good condition. All documented measured values are within the permissible tolerances. Particularly noteworthy are the very good parallelism values of 0.003 mm and 0.004 mm, as well as the very good roundness values of the vertical spindle of 0.002 mm and 0.008 mm. The squareness of the vertical spindle is also within the permissible specifications, at 0.003 mm and 0.014 mm. The machine is equipped with high-quality components and is ideal for precise 5-axis machining, tool and mold making, as well as demanding single-part and series production. Sale subject to prior sale. Technical data without guarantee. Inspection possible by arrangement.

Condition: like new (used), Year of construction: 2019, operating hours: 794 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, controller model: Siemens, overall weight: 7,750 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 60, We offer an DMG DMU 50 in great condition with only 794 hours. Machine will be in stock next week. Machine has following options: - Siemens 840D SL - Speedmaster Motorspindel 20.000 RPM 35 kW / 25 kW Torque 130 Nm / 86 Nm) SK40 - 60 tool automatic tool changer - Chip conveyor - Swivel table 630 x 500 mm - Internal coolant 20 bar - External air coolant - Air true spindle Ppsdpfx Alozb Em Rs Nsu - Rotating clear view window - Spray Gun - Oil and emulsion mist separator - Touch probe Heidenhain TS460 - Tool measuring device Heidenhain TT160 - 3D quick set - Electronic handwheel

Condition: used, Year of construction: 2014, x-travel 600 mm Podpfx Aljycxinj Nspu y-travel 500 mm z-travel 500 mm total power requirement --- kW weight of the machine ca. 9,6 t dimensions of the machine ca. --- m

Condition: new, Year of construction: 2026, operating hours: 293 h, functionality: fully functional, machine/vehicle number: 10000004654, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 130 kVA, torque: 430 Nm, controller manufacturer: Siemens, controller model: CELOS 840D sl Operate, workpiece height (max.): 1,600 mm, workpiece diameter (max.): 1,250 mm, workpiece weight (max.): 2,600 kg, rotary table diameter: 1,250 mm, rotational speed (max.): 500 rpm, overall weight: 31,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 204 h, coolant supply: 150 bar, spindle motor power: 52,000 W, spindle nose: HSK-A 100, number of spindles: 1, number of slots in tool magazine: 123, tool length: 650 mm, tool diameter: 280 mm, tool weight: 30 g, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is not in operation and is not connected to power. The frequency-controlled coolant system with a maximum of 150 bar includes a container with a capacity of 2500 liters and is equipped with a magnetic roller separator and a centrifuge. An oil mist extraction system is installed. A 3-point torque support for angular heads is implemented. A rotating dressing device is installed for truing the grinding wheels. In addition, the machine has a Heidenhain measuring probe TS 640. A tool breakage monitoring system and a Blum laser for workpiece measurement are available. Expansion system for 3D Quickset. Equipped with MPC, SGS, alternating speed during turning, as well as various cycles for grinding, turning, and the MDynamics package. Roughing cycle, multi-tool function. Pjdpozg U H Nefx Al Njpu

Condition: ready for operation (used), Year of construction: 2011, 5-AXIS Machining Center Brand: DMG MORI Type: DMU 50 Year: 2011 CNC: Heidenhain iTNC530 Equipped with: Integrated rotary table, dia. 630 x 500 mm / 300 kg 13 kW spindle – 10,000 rpm 16-position tool changer 3D probe 3D quickset Tool probe Coolant gun Electronic handwheel Pjdezgca Djpfx Al Nepu Chip conveyor Specifications: Table surface 630 x 500 mm X-axis travel 500 mm Y-axis travel 420 mm Z-axis travel 400 mm B-axis -5/+110° C-axis 360,000° Spindle speed 20 - 10,000 rpm Spindle power 13 KW Spindle taper SK 40 Rapid traverse XYZ 24 m/min Machine dimensions with chip conveyor 4670 x 2350 x H 2750 mm Approximate weight 4,680 kg

Condition: used, Year of construction: 2002, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,600 mm, spindle speed (min.): 10,000 rpm, Universal machining center Machine type: DMG DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm. Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Tool weight: 30 kg NC rotary table: 2500 x 2000 Ppedpfxex Uxc Te Al Nou Pallet system Number of pallets: 2 Pallet size: 2,500 x 2,000 mm Top table: D. 2,800 Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, rotary table diameter: 1,700 mm, rotational speed (max.): 10,000 rpm, coolant supply: 40 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Universal Machining Center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year of manufacture: 2002 TECHNICAL DATA: Travel paths: X-axis: 1,800 mm Y-axis: 2,000 mm Z-axis: 1,100 mm B-axis: 0.001° C-axis: 0.001° Ppsdpfxexuqn Se Al Nsu Number of controlled axes: 5 Speed range: 10,000 rpm Drive power: 44 kW Tool holder: SK 50 Tool changer Tool stations: 60 NC rotary table Table size: 1,700 x 1,400 mm Max. table load: 5,000 kg Equipment features: Chip conveyor Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe Electronic handwheel

Condition: used, Year of construction: 2006, total height: 5,000 mm, total length: 7,500 mm, total width: 6,000 mm, overall weight: 45,000 kg, Machine No.: 10990003463Control SystemHeidenhain iTNC 530 (3D path control)Travel PathsX: 1,850 mmY: 2,000 mmZ: 1,100 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 25–12,000 rpmPower: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-slot tool magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lATC (Application Tuning Cycle)Laminated safety glass windowOperating mode 4 (process observation) Ppjdpfezhdrkox Al Nsu Travel Z-axis: 1170 - mm Travel X-axis: 2000 - mm Dimensions (LxWxH) approx.: 7500 x 6000 x 5000 mm Travel Y-axis: 1800 - mm Weight approx.: 45,000 kg Year of construction: 2,006 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123ControlHeidenh ain iTNC 530 HSCI (3D path control)Travel PathsX: 1,850 mmY: 2,100 mmZ: 1,250 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 1,700 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Torque: 288 / 187 NmTool holder: SK50 according to DIN 69871Tool Changer60-fold chain magazineDouble gripperEquipmentIKZ 40 barChip conveyorTool measurement system Blum Laser NT HybridHeidenhain TS 640 infrared probeElectronic handwheelMinimum quantity lubrication (MQL)Oil/emulsion mist separatorCoolant through spindleCoolant tank 980 lRotating viewing window3D quickSETMachine Protection Control (MPC)Adaptive Feed Control (AFC)ATC (Application Tuning Cycle)DMG MORI NetServiceDMG MORI SMARTkeyDocumentation and electrical schematic (German) Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Ppedezhdrdjpfx Al Nou Travel Z-axis: 1250 - mm Travel X-axis: 1850 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, Year of construction: 2015, total height: 5,000 mm, total length: 9,000 mm, total width: 6,000 mm, overall weight: 85,000 kg, Year of Manufacture: 2015 Machine No.: 12300000163 Pjdpfx Aozhdq Tol Nspu Price: EUR 1,500,000Control SystemHeidenhain iTNC 530 HSCI (3D path control)Travel PathsX: 2,700 mmY: 2,700 mmZ: 1,600 mmB-axis: controlled universal swivel milling headC-axis: NC rotary table Ø 2,200 mm5-axis simultaneous machiningSpindleMotor spindle SK50Speed: 20–12,000 min⁻¹Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle)Tool holder: SK50 according to DIN 69871Tool Changer63-slot wheel magazineDouble gripperEquipmentIKZ 40 barChip conveyorElectronic handwheelRotating viewing windowMinimum quantity lubrication (MQL)Coolant through spindleCoolant tank 980 lMold making packageActive chatter suppression (ACC)Adaptive feed control (AFC)Oil/emulsion mist separatorSmartkey packageAdditional safety viewing windows (Visiport)Operating mode 4 (process observation) Weight approx.: 85,000 kg Dimensions (LxWxH) approx.: 9000 x 6000 x 5000 mm Year of construction: 2,015 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: No

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you: Technical data: Control system: Heidenhain iTNC 530 HSCI Travel ranges: - x-axis: 600 mm - y-axis: 500 mm - z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - b-axis: -5° to +110° - c-axis: 360° Ppedpoxgnz Tefx Al Nju Tool changer: - Tool holder: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct path measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Measuring probe infrared, manufacturer Heidenhain TS 649 - Preparation for 3D quickSET - Chip conveyor - MQL, 40 bar, tank 600 l, incl. rotating viewing window, compressed air, linear measuring systems, bed flushing - Flushing gun - Mechanical oil and emulsion mist separator - Compressed air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, side loading door - Electrical interface for articulated-arm robots - Pneumatic control and monitoring of the zero-point clamping system - Selection and de-selection of the handling system via a switch on the machine control panel - incl. additional flushing in the work area - incl. machine preparation for job management - incl. control panel arrangement on the left - Power supply to the machine table incl. 2-channel rotary feedthrough - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 clamping circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - incl. extension of the rotary feedthrough to 4 channels Operating hours: approx. 66,600 h Spindle hours: approx. 44,800 h The ball screw drives and linear guides in the x and z axes have been renewed. Accessories, tools and clamping devices shown in the pictures are only included in the scope of supply if this is noted in the additional information. Changes and errors in the technical data and information, as well as prior sale, are reserved!

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Pjdpsy D Hvaefx Al Nepu Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2018, Table size 600 x 500mm diameter, table load 400 kgs, Traverses XYZ 600 x 500 x 500mm, B axis -5/+110 degrees, C axis 0.001 degrees Podownpzaspfx Al Nspu Rapid feedrates 80m/min, 120 station toolchanger, spindle taper HSK 63 spindle speed 20,000rpm, Siemens 840D eRGOline control Swarf conveyor. Through Spindle Coolant