Used Device Electric/Pneumatic for sale (44,718)

Year of construction: 2022, condition: good (used), functionality: fully functional, machine/vehicle number: P0000581, Bonding device from Alba Industries GmbH, used as a parts dispenser 24VDC / pneumatic. Includes extensive components from Festo, Norelem, Item, Gutekunst, Beham, Igus, ACE, Storz, Elesa & Ganter, Steyr-Werner, etc. Bill of materials of the installed elements see attached PDF. Dksdeyybitepfx Aa Hot EPlan and pneumatic diagrams are available and can be viewed upon request and on-site appointment.

Condition: new, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector Djdpezlivpsfx Aa Hokt

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke, mounted on a handling device, handling system, or manipulator for screwing applications. Screw unit: BÖLLHOFF / BOSCH REXROTH, type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke controlled by Festo valves and cylinders. Various monitoring systems are also installed for complete automation. Screwdriver 1 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Inline gearbox Screwdriver 2 consists of the following components: Rexroth, type: Servomotor Rexroth, type 0: Planetary gearbox Rexroth, type 0: Encoder Rexroth, type 0: Offset gearbox Dimensions (W x H x D): 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Last used screws: M6 x 15 mm Electric screwdriver unit Rexroth Servomotor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length: 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nominal torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Inline gearbox Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset gearbox Rexroth Type: 2VNA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex reach: 250 to 650 mm Handyflex reach when pivoted up: max. 860 mm Dksdpfx Aajfx Hyfj Het Rotation radius at full reach: max. 360° Vertical guide column: Ø 30 mm Horizontal guide columns: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions (L x W x H): approx. 1150 x 650 x 1400 mm Total weight: approx. 90 kg Good condition Without the blue steel pallet as a base plate The blue steel base plate is not included in the scope of supply.

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Weight: 290 kg Good condition Dkodpfx Aaedzqaco Hjt

Condition: used, Electric chain hoist, electric lifting gear, crane DEMAG type DKUN 2-160 K V3 F6 Serial no.: 61620975 Year of manufacture: 1995 Load capacity: 310 kg Hook path: 1.45 meters Distance from suspension to load hook: 450 mm Lifting speed: 12.5 m/min (double fall) Dkjdpfx Aexpqz Isa Hst Pendant control cable length: approx. 1.9 meters Mains connection: 400 Volt, 50 Hz - 2 lifting strands = 300 kg - only one lifting speed Weight: 33.5 kg

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Djdpfx Aeyqr Sxea Hokt

Condition: excellent (used), For sale: Professional Schneider Electric Masterpact NW25 H1 circuit breaker equipped with a Micrologic 5.0 A protection unit. This device is used in industrial power distribution systems—such as low-voltage switchboards, manufacturing plants, industrial halls, and power installations. The Masterpact NW series circuit breakers are designed for demanding industrial environments and provide reliable protection against overloads and short circuits. The unit is in very good visual and technical condition—the exact condition can be seen in the photos. Technical Specifications: Manufacturer: Schneider Electric Series: Masterpact NW Dkjdpjyua Amefx Aa Het Model: NW25 H1 Protection unit: Micrologic 5.0 A Rated current: 2500 A Insulation voltage: Ui 1000 V Impulse withstand voltage: Uimp 12 kV Operating voltage: up to 690 V AC Breaking capacity Icu: 65 kA Ics: 100% Icu Standard: IEC 60947-2 Frequency: 50 / 60 Hz Utilization category: AC23A Year of production: 2011 Assembly location: Schneider Electric Venray (Netherlands) The circuit breaker protects installations against overloads and short circuits, and allows for adjustment of protection parameters thanks to the Micrologic unit. Applications: • Low-voltage switchboards • Industrial facilities • Power installations • Energy distribution systems • Large machinery and production lines ✔ Robust industrial construction ✔ High breaking capacity ✔ Adjustable Micrologic protection settings ✔ Equipment from the renowned manufacturer Schneider Electric

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. Dsdoxf Up Ujpfx Aa Hokt The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: used, Electric chain hoist, electric lifting unit, crane ABUS type FN-3 Load capacity: 125 kg Hook path: 4 meters Lifting speed: 7.2 m/min Fine lifting speed: 1.8 m/min 1 load chain Dodpfxoxcil So Aa Hekt

Condition: used, Electric welding machine, stick electrode welding machine ESAB Type LTG 250 Machine No. 736-820-387 Year of manufacture 1997 Output: 250 Amps = 35% duty cycle 190 Amps = 60% duty cycle 150 Amps = 100% duty cycle Output setting: stepless - Electrode holder with 6-meter connection cable - Direct current - Fan-cooled Dkodpfxod N E Rvj Aa Hjt - Optional, TIG welding is also possible, without hose pack Mains connection: 380 Volts, 50 Hz, 32 Amp plug Space required L x W x H: 1200 x 750 x 1050 mm Weight: 180 kg Good condition The unit was originally also designed for TIG welding. The hose pack for TIG welding is not included, and the function has not been tested. The water cooling was for the hose pack for TIG welding. Therefore, the unit will only be sold as a stick electrode welding machine. The welding test with stick electrodes yields very good results.

Condition: used, Pneumatic pick & place manipulator, loading unit similar to SCARA robot. Handling device, handling system, placement gripper, loading gripper for automation. Horizontal axis with guided cylinder linear module type CLM 100-H100 (GEMOTEC column module). Vertical axis with guided cylinder linear module type CLM 100-H50 (GEMOTEC column module). Payload: max. 2 kg Horizontal stroke: 100 mm (pneumatic) Vertical stroke: 50 mm (pneumatic) Vertical adjustment on both support columns: 330 mm (manual, with clamping) Support columns, vertical guide column: Ø 55 mm Dedpexf Ur Aofx Aa Hjkt Mounting base: 175 x 90 mm - Pneumatically traversable in two axes with precise linear guidance - End position dampers - Mounting plate for tool attachment 55 x 65 mm Required space (L x W x H): 320 x 170 x 550 mm Net weight: 16 kg Very good condition Various manipulators available, see our webshop.

Condition: used, Electric chain hoist, electric lifting unit, DEMAG crane, type DKES 2-200 K V2 DI with Dematik BUS control via crane control system Factory No. 61456646, Year of manufacture 2003 Load capacity: 200 kg Hook travel: 4.0 meters Main lifting speed: 14.0 / 19.2 m/min Dkedpfx Aajgd Ipns Hjt Fine lifting speed: 0.20 m/min Chain size: 4.2 x 12.2 mm 1 load strand = 200 kg - with DKES2/5 500V control logic - without crane operating control - Dematik BUS control via crane control system - without trolley Mains connection: 400 volts, 50 Hz Rated power: 750 W Rated current: 2.4 A in good condition

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type DKUN 1-100 K V1 F4 Serial no.: 61801900 Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Pendant control cable length: approx. 1.8 meters Dsdpfeu Swb Ujx Aa Hskt Power supply: 400 volts, 50 Hz 1 load strand = 100 kg Net weight: 16.5 kg Good condition

Condition: used, PCB test device with contact pin testing, ELABO 99-9Z ZM 107011 test system Test system for single-sided testing of SMD PCBs Manufacturer: ELABO Model / Type: 99-9Z ZM 107011 Serial No.: SN0064623 Year of manufacture: 2004 Without two-hand control panel The machine originates from a production shutdown. You will receive the machine exactly as pictured, without any functional guarantee. Djdpfjxcivqox Aa Hjkt For your safety and ours: Please make sure to take advantage of the opportunity for inspection.

Condition: used, Electric chain hoist, electric lifting mechanism, crane STEEL type Si T 201-10/2.5 No.: 1202373, Year of manufacture: 1989 Load capacity: 250 kg Hook travel = lifting height: 3.5 meters Dkedog Rhx Rjpfx Aa Het Lifting speed: 10 m/min. Fine lifting speed: 2.5 m/min. 2 load chains = 250 kg Cable length for control pendant: approx. 1.4 meters Power connection: 400 volts, 50 Hz. - Suspension eye on the top of the crane Weight: 22 kg Good condition

Condition: used, Electric chain hoist, electric lifting mechanism, DEMAG crane, type DKUN 1-100 K V1 F4 Manufacturer's serial number: 61801899, Year of manufacture: 1997 Load capacity: 100 kg Hook travel: 3 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min Chain size: 3.6 x 10.6 mm Control pendant cable length: approx. 1.7 meters Power connection: 400 Volts, 50 Hz 1 load strand = 100 kg Weight: 16.5 kg Dsdpfx Aehtr Eyja Hokt Good condition

Condition: good (used), Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet -Thread cutting head: self-opening thread cutting head -Type: CH7-44 -Image: M48 -Collet: Ø 25 mm -Dimensions: 330/210/H135 mm Dkjdpsv Uw Amsfx Aa Hot -Weight: 17.4 kg

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Dodpexf Uw Sefx Aa Hekt Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: used, Electric chain hoist, electric lifting unit, crane STAHL type T510-8 / 2.0 2/1 Manufacturer's serial number: 1524132, year of manufacture: 1997 Lifting capacity: 2000 kg Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min Load strands: 2 Control pendant cable length: approx. 0.9 meters Rated power: 1.6 kW / 0.36 kW Rated current: 4.3 A / 2.5 A Mains connection: 400 volts, 50 Hz - Suspension eyelet on the top of the crane - Emergency stop Weight: 75 kg Dedpekwh H Aofx Aa Hekt Good condition

Condition: used, Electric chain hoist, electric lifting mechanism, GIS crane type 150 / F Manufacturer's serial number: 1502802 Year of manufacture: 1981 Dedpfx Asgi E Evja Hekt Load capacity: 1500 kg Hook travel: 4 meters Main lifting speed: 4 m/min Fine lifting speed: 1 m/min - Electric trolley with a speed suitable for double T-beams - 2 load strands Good condition.

Condition: used, Electric chain hoist, DEMAG crane Type PK2N-F Serial no.: 5785034 Year of manufacture: 1988 Load capacity: 500 kg Dkjdpfx Aexf Uqfsa Hst Hook travel: 5 metres Main lifting speed: 5 m/min Precision lifting speed: 1.25 m/min Control pendant cable length: approx. 3.5 metres Power supply: 400 Volt, 50 Hz - 2 load chains = 500 kg - Electric trolley DEMAG, type 13/3 PF8 with 1 travel speed approx. 8 m/min, type 13/3PF 8 - For double-T beams with approx. 100 to 200 mm flange width Weight: 63 kg Good condition

Condition: used, Electric chain hoist, electric lifting device, crane DEMAG type PK 2 N Serial No: 2033985 Year of manufacture: 1973 Load capacity: 500 kg Hook travel: 15 meters Lifting speed: 5 m/min Dodpfx Aajy E T Dmj Hokt - 2 fall lines Good condition

Condition: used, YALE Electric Chain Hoist Crane Type CPV 10-8/20-4 Serial No.: VC 000876 S Year of manufacture: 2010 Load capacity: 2,000 kg Hook travel: 4.1 meters Lifting speed: 4 m/min Distance suspension to load hook: 550 mm Pendant cable length: approx. 2 meters 2 fall chain = 2,000 kg Motor power: 1.5 kW Mains connection: 400 Volt, 50 Hz - Emergency stop - Suspension eye on crane top - Without trolley Dksdpfx Asx Urb Nja Hst Weight: 65 kg Good condition

Condition: used, E-chain hoist, electric hoist, crane DEMAG type DK5-500-K-V1F4 Factory no.: 63207040 Year of manufacture: 1993 Load capacity 1000 kg Hook path 2.6 meters Distance from suspension to load hook 450 mm Dksdpfxov Daqre Aa Het Main lifting speed 4 m/min. Fine lifting speed 1 m/min. Cable length of control box approx. 1.7 meters Mains connection 400 volts, 50 Hz. 2 load strands = 1000 kg - Emergency stop Weight 46 kg good condition

Condition: used, Electric chain hoist, electric lifting device, crane MAN GHH type SKA 83.12 Year of manufacture: approx. 1997 Load capacity: 125 kg Hook path: 8.2 meters Main lifting speed: 8 m/min Fine lifting speed: 2 m/min 1 load chain Power supply: 380 Volt, 50Hz Dsdexcit Ajpfx Aa Hekt