Used Deltawood Rdc 3M for sale (1,270)

Condition: used, Year of construction: 2022, Automatic mortising machine with 3 heads ideal for mortising of doors, gates, gate posts, general joinery Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement is adjustable through hydraulics Automatic operation 3 x Mortising heads each : Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the heads (patented design) Each mortise head Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - centre to centre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Ljdpfszd Uy Rsx Akwsah Serial nr - 127-22 Year - 2022 CE

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 30111, functionality: fully functional, operating hours: 123 h, The OekoRona M is an electrostatic precipitator that significantly reduces fine dust emissions from automatic wood-fired heating systems with outputs between 300 kW and 3 MW. The precipitator has a modular design and can be installed in both new and existing systems. The mechanical cleaning system enables fully automatic operation of the precipitator and reduces maintenance to a minimum. OekoRona M facts: - for automatically fed wood-fired heating systems up to 3 MW - automatic, mechanical cleaning - tested separation efficiency - low operating costs - retrofittable - suitable for overpressure and underpressure operation - bypass - low energy consumption - various designs - flexible ash removal - operating optimization through remote maintenance Manufacturer: OekoSolve AG Type: OekoRona M Identification number: ORM-30111 Specified electrical power consumption: 1.65 kW Lodpo Aba Rgsfx Akwoah Temperature class: T250 (according to the specified marking) Operating principle The flue gas flows through the tubes of the filter system, which are equipped with ionization electrodes. The high voltage electrically charges the fine dust particles, which then deposit on the inner surfaces of the separation tubes. The mechanical cleaning system automatically removes the deposited dust particles, which then fall into a lower collection container. An automatic discharge screw can transport the dust to an external collection container. Key technical features Feature Description Application area Automatic biomass-fired heating systems Boiler output range Approx. 300 kW to 3 MW for the product series Dust separation Electrostatic Cleaning Automatic mechanical cleaning Flue gas temperature Maximum 250 °C Operating mode Suitable for overpressure and underpressure systems Bypass Integrated bypass Operation Touchscreen control Dust removal Collection container; screw discharge, depending on the design or optional Condensation protection Electrical or hydraulic heating, depending on the design Installation After the boiler in the boiler room

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, functionality: fully functional, machine/vehicle number: Seriennr. 3073196, working width: 380 mm, type of input current: AC, input voltage: 220 V, total width: 800 mm, total length: 2,820 mm, total height: 1,070 mm, stack height: 400 mm, Equipment: safety light barrier, The Morgana RDC 3852 is a digital rotary die-cutter for print finishing, enabling die-cutting, kiss-cutting, creasing, and perforating in a single pass—ideal for the digital print market and short runs. It utilizes flexible magnetic dies and features an air suction feeder for materials up to 400 gsm (up to 368x508 mm), an automatic waste stripper, and rapid job changeover, making it highly efficient for producing tailored products such as labels, cards, and tickets. Lodpfx Akjx Syvcswsah

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of supply: Robot, controller, cables, teach pendant, wiring diagram. Used item – normal signs of wear. Lsdpfxjz Rl Ude Akweah Further details, article numbers, and images available upon request. Two weeks start-up warranty. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: used, Year of construction: 2024, functionality: fully functional, 3M Encapsulated System Holder 16EZB – Filter holder for production capsules Manufacturer: 3M Purification Inc. / 3M Separation and Purification Sciences Division Model: 3M™ Encapsulated System Holder 16EZB Year of manufacture: 2024 Location: Marburg, Germany Condition: Used, already in operation New price: approx. 78,000 USD Description: For sale is a high-quality 3M™ Encapsulated System Holder, type 16EZB, for use in biopharmaceutical production, pilot plants, or process development. The filter holder was specifically designed to accommodate 3M production capsules and is suitable for both upstream and downstream processes. The vertical process design ensures optimal media utilization. The system allows for quick capsule changes and reduces cleaning and validation efforts compared to conventional stainless steel filter housings. Technical features: Model: 16EZB Accommodates 1 to 7 multi-cell production capsules Robust stainless steel construction Vertical operating position for optimal media utilization Swivel design for easy loading and unloading Mobile system with industrial swivel casters Locking mechanism with two handles Suitable for pilot and production scale Maximum differential pressure load: 3.4 bar (50 psid) Materials: Frame: Stainless steel 304 End plates: Stainless steel 304 Guide rods: Stainless steel 316 Base: Stainless steel 304 Locking elements: Stainless steel 304 Rollers: Polyurethane on stainless steel construction Application areas: Biopharmaceutical production Cell culture harvest Monoclonal antibodies (mAb) Recombinant proteins Microbial filtration Downstream process steps Pilot and scale-up applications Advantages: No stainless steel filter housings required Reduced cleaning and validation efforts Quick capsule changes Low risk of contamination Space-saving design High process flexibility Scope of supply: 3M Encapsulated System Holder 16EZB Used, functional Further details and photos on request Inspection: Possible by appointment in Marburg. Price: Lsdpfx Aszbkr Eskweah Negotiable Contact: Further information, technical documents, and inspection appointments on request.

Condition: used, Year of construction: 2013, color: green, overall weight: 6,000 kg, maximum load weight: 5,305 kg, empty load weight: 695 kg, loading space volume: 3 m³, loading space width: 2,000 mm, loading space length: 3,350 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/2013, gearing type: other, driver cabin: other,

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Lodpfx Asyaywhskwsah Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, FARO Quantum M Max 3.0m – 7-axis measuring arm for sale incl. Polyworks We, R+S Metallbearbeitung & Lasertechnik GmbH & Co. KG, are selling a FARO Quantum M Max 3.0 m 7-axis FaroArm, 6th generation. Features - FaroArm Quantum M Max, 3.0 m, 7 axes - Bluetooth and Wi-Fi technology - Calibration kit - Mounting plate - iProbes (3 mm & 6 mm) - USB cable & power supply - Robust transport case - 1 rechargeable battery Ljdpfx Ajw R Tk Nekweah Additionally: - Magnetic Mount G3+ (150 mm) - iProbe adapter (M4 thread) - Software: Polyworks incl. IGES & STEP - "Complete Care" service plan valid for 5 years (maintenance, calibration & repairs) (4 years remaining) Location: 32130 Enger, Germany If you are interested or have any questions, we look forward to hearing from you.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, machine/vehicle number: AGH634, 1x Mobile column-mounted slewing crane, mobile gantry crane Type WK1 - Year of manufacture 2014 Load capacity at full reach: 250 kg / 0.25 tonnes Overall height: approx. 3.7 m, Reach: approx. 3 m Hook height: approx. 3.2 m, Lower edge of boom: 3.5 m Base size: approx. 110 x 110 cm Column with counterweight incl. ABUS 250 kg chain hoist, cable carrier and accessories Lajdozy D D Repfx Akwsh Total weight: approx. 3350 kg Connection to 400 V, Slewing range: 270° Very good condition, fully functional Item location is 75053 Gondelsheim Only the crane system shown in the pictures is being sold. See pictures Shipping via freight forwarder or collection

Condition: used, total height: 2,000 mm, total width: 2,300 mm, total length: 2,000 mm, Year of manufacture: 1969 Colour: Grey Empty weight: 3.800 kg - Year: 1969 - Serial number: 9327 - Drive system: Conventional - Horizontal/vertical: Horizontal and vertical - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 420 Laodpfoyzhdmsx Akwjh - Z-axis travel [mm]: 710 - Table length [mm]: 1520 - Table width [mm]: 385 - Tool holder: ISO50 - Main spindle power [kW]: 11 - Min. spindle speed [rpm]: 25 - Max. spindle speed [rpm]: 2000 - Transport dimensions: 2000mm x 2300mm x 2000mm (l x w x h) - Transport weight [kg]: 3800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 579-130-09, Printed with 1S1C by Meca Tecno srl, Italy. The machine can be tested. Ljdpezfgigofx Akwsah In very good condition. Regularly maintained. Please contact us for more information.

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Select Agroselector 6T-3M optical sorter Lajdpfxeyku Iio Akwoh Brand: Select Model: Agroselector 6T-3M colour Year of manufacture: 2004 Power supply: 400 V Overall dimensions: 1300 x 4000 x 1800 mm Net weight: 600 kg The machine includes: - Control panel: multi-touch "Siemens" screen - Feeding system: vibratory feeder - Construction material: stainless steel The Select Agroselector 6T-3M is an advanced machine for optical sorting of products such as potatoes or other vegetables, based on color analysis. Thanks to its precise detection system and vibratory feeder, the device ensures even distribution of raw material and effective separation of products that do not meet quality standards (e.g., discolored or damaged items). The control system, based on Siemens components, guarantees intuitive operation and process stability.

Condition: used, Year of construction: 2017, STREUMASTER SW3 FC 3 Cubic Meter Lime Spreader Soil Stabilizer Container: • Year of manufacture: 2017 • 3 m³ container volume • Filling connection: 3" / 3" Spreading mechanism: • Working width: 2,460 mm • Partial widths: 3 x 820 mm Lodpfx Akswv H Nqjweah • Spreading rate at 1 km/h: 1-50 kg/m² (with a binder density of 1 kg/liter) Weight and dimensions: • Tare weight: 1,250 kg • Dimensions: 1,600 x 2,550 x 1,990 mm Tractor requirements: • Three-point linkage: Category 2 DIN / ISO 730 - 1 • Required hydraulic output: 50 liters/min at 180 bar • Max. permissible hydraulic flow rate: 75 liters/min • Electrical system: 12 V - Loading possible! - 1 owner! - German machine! - Ready for use! Errors and prior sale excepted! = Further information = Year of manufacture: 2017 Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Belt Fryer Brand Technoinvest Engineering Ltd Model FML-3M Number: 350 Year of construction: 2008 Mesh belt with partitions Belt width: 680 mm Distance between partitions: 200 mm Laedpfx Aswatvrjkwsh Band height: 40 mm Overall dimensions: 9800 mm x 1500 mm x 2350 mm

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Lsdpfjwym Nfex Akweah Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, mileage: 1 km, first registration: 01/1998, overall weight: 6,647 kg, color: orange, Year of construction: 1998, Stock no. 5824 Approx. 3 m³ ATC 50 Asphalt Thermal Container ---Manufacturer: ATC Type: ATC 50 Year of manufacture: 1998 Gross weight: 6,647 kg Unladen weight (manufacturer specification): 1,647 kg Payload: 5,000 kg Color: Orange Volume: approx. 3 m³ Lajdpfx Aoy Sra Hokwsh Hydraulic Hardox feed auger Hydraulically operated roof Swivelling V2A discharge chute Control box at rear left Foldable access ladder at rear right Propane gas heating with thermostat 2 holders for 33 kg gas cylinders each Gas consumption per hour: approx. 2.0 kg Support stands Required loading area for truck: 3.06 m long x 2.14 m wide Container dimensions: approx. 3.60 m long x 2.00 m wide x 1.54 m high Notice regarding potential errors in the listing: Despite taking great care in preparing this listing, there may be occasional errors in the description or information provided. We accept no liability for inaccuracies, changes or prior sale. All information is without guarantee. Please contact us to verify details or for further questions.

Condition: excellent (used), Roller conveyors for the furniture industry, WTT Fördertechnik GmbH, Type 121 Price for: 1 unit = 75 EUR (total length 3m) For larger quantities, price on request. Detailed description: Roller conveyor length L = 3000 mm Installation length IL = 500 mm Load roller spacing T = 200 mm Roller conveyor height H = 280 mm, adjustable by +/- 25 mm Number of feet FA = 1 unit per running meter Consists of: - 2 units of side rails (side profiles), each 3000 mm long, made of profile 20/80/40/3 mm, with a grid spacing of 25 mm, holes suitable for a 12 mm diameter axle, powder-coated in RAL 6011 green. Weight per side rail: 8.15 kg - 15 units of insertable load rollers Series 4.5.80.1.12.1.5.00 Steel tube - 80 x 2.0 mm wall thickness, Axle - 12 mm spring axle, Bearing – steel insert with reinforced, pressed special ball bearings. Surface of the load rollers is steel-finished. Installation length IL = 500 mm Weight per roller: 2.4 kg - 3 units of screw-on bridge support feet in a stable welded construction made of special profile with cross brace, height adjustable by +/- 25 mm via threaded spindle M16 with screw slot. With floor mounting plates and dowel hole. Powder-coated in RAL 3000 red. Weight per foot: 2.5 kg. (Subject to changes and errors in the technical data and prior sale) Lajdpfx Aswwmitskweh

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: DN175501, 1x Abus VS column-mounted swivel crane, NL 500 KG Load capacity at full extension: 500 KG / 0.5 tonnes Height: approx. 4 m (including base: 0.35 m) Outrigger length: approx. 3.7 m Reach: approx. 3.5 m Hook height: approx. 3.3 m Total weight: approx. 450 kg Including Abus chain hoist with floor control (2 lifting speeds) with swivel and trolley drive Connection to 400V, 16A, swivel range 360° Crane is disassembled and immediately available The gripper is not included! Item location: 75053 Gondelsheim Laodpfxjzv Hyts Akweh Only the crane system shown in the pictures is sold. Very good condition, see pictures Shipping by freight forwarder or collection by appointment.

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp Laedpfx Aen Nv Txekwoh

Condition: used, Year of construction: 2006, operating hours: 37,695 h, functionality: fully functional, Equipment: documentation/manual, CNC lathe – Gildemeister CTX 410 with C-axis (used) Machine data Model: Gildemeister CTX 410 Year of manufacture: 2006 Control system: Siemens 840D (ShopTurn) Spindle hours: approx. 37,695 h Max. spindle speed: 5,000 rpm Max. turning length: 635 mm Spindle bore: 65 mm Tool turret: 12-station Tool holder: VDI30 Condition: used, functional Accessories Chip conveyor with coolant pump Bar loader included, but never connected IFM oil mist extraction system Röhm 3-jaw chuck Maintenance / Service The machine was recently realigned by a DMG technician (turret and spindle). The following components were replaced: Door switch Foot pedal for chuck Lajdpfxoz Nxcxs Akwsh Various relays New NPU New PLC Location 24222 Schwentinetal Transport / Collection Collection only Transport and loading are to be arranged by the buyer Terms of sale Sale exclusively to businesses / entrepreneurs No sale to consumers Sale is made with exclusion of any warranty for defects No guarantee or warranty of suitability Inspection and functional testing possible by appointment Price net. VAT can be shown separately.

Condition: new, Year of construction: 2024, SCHORR electric high lift pallet truck 1200kg load capacity -- Different lifting height variants are available (2500mm, 3000mm & 3500mm) -- Low maintenance and smooth-running -- Including 24V batteries and charging station -- 1.2t load capacity -- Top price-performance ratio -- NEW! Prices depending on lifting height / variant: Lajdpfx Aopz Itgskwjh -- 2500mm lifting height: 2436,00€ -- 3000mm lifting height: 2819,00€ -- 3500mm lifting height: 2839,50€ The electric pallet trucks from SCHORR offer an excellent price-performance ratio. The off-center drive unit enables a small turning radius with excellent all-round visibility. Each model is equipped with a multifunctional tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has an auger mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are fitted with plastic that gives way. The emergency stop switch is located in a central position and is therefore easy to reach at all times. The pallet trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with little noise and vibration. Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR12HHE Load capacity: 1.2t Model: 250E // 300E // 350E Tare weight incl. batteries: 453kg // 465kg // 477kg Drive: Electric Tires: Polyurethane Basic dimensions Overall length: 1755mm Overall width: 795mm Length including fork crown: 605mm Stroke: 2500mm // 3000mm // 3500mm Height of mast retracted: 1744mm // 1994mm // 2244mm Height of mast extended: 2924mm // 3424mm // 3924mm Fork dimensions DIN ISO 2331: 60mm x 160mm x 1150mm Fork outer spacing: 570mm Aisle width with pallet: 800 x 1200 lengthwise 2068mm Turning radius: 1366mm Handling speed Travel speed with/without load: 4.0km/h / 4.2km/h Lifting speed with/without load: 0.09m/s / 0.14m/s Lowering speed with/without load: 0.11 m/s / 0.1m/s Max. Gradeability with/without load: 6% / 8% Whether you want to have the pallet truck delivered or collect it from our premises in 48465 Schüttorf, we have the right solution for everything. Please feel free to contact us. In order to make pick-ups and viewings as convenient as possible for you, we would like to point out that they are only possible by telephone appointment. Would you prefer to finance or lease the device? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our pallet trucks. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, empty load weight: 10,680 kg, maximum load weight: 29,320 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2011, next inspection (TÜV): 12/2026, loading space length: 10,500 mm, loading space width: 2,510 mm, loading space height: 970 mm, suspension: air, tire size: 245/70R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), extendable to 3m, lashing rings, hydraulic ramps, rear support, twin tires, wheel recesses. Body: 4-axle low-loader trailer with hydraulic loading ramps, 4x 10t Gigant axles, drum brakes! Ramp length approx. 2850 mm! Loading height approx. 970 mm! Wheel recess height at the front approx. 600 mm, at the rear approx. 670 mm! The trailer has received a new kingpin! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Laedjxx A H Iopfx Akweh - .

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Crane available 2x! Jib length 3m, 80 kg capacity With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Ljdpfx Akex U Nqbewoah Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Condition: used, functionality: fully functional, Year of construction: 1977, machine/vehicle number: MIKA666, Demag 1-girder suspended crane, bridge crane, crane system, hall crane, portal crane, suspended crane system. Load capacity: 500 kg Width: approx. 3.5 m, track gauge: approx. 3 m The undercarriage can be adjusted to fit the girder dimensions up to approx. 8-14 cm. Ledpfx Aszv Iybskwoah Includes complete control system, floor-level operation via control box. 2 lifting speeds, Demag PK2 chain hoist, 2-strand, 500 kg load capacity. The crane is fully electrically movable in all 3 axes. Lifting height/hook travel: approx. 3 m Connection to 400V 16A Good used condition Shipping via freight forwarder, collection preferred Location: 75053 Gondelsheim Please inquire about shipping costs based on your postal code; we will provide you with an immediate and non-binding offer!

Condition: used, mileage: 3,990 km, gearing type: automatic, fuel type: electric, color: red, overall weight: 3,025 kg, empty load weight: 2,340 kg, maximum load weight: 1,500 kg, lifting height: 3,010 mm, tire size: 18X7-8, number of seats: 1, first registration: 11/2014, emission class: none, suspension: other, Year of construction: 2014, operating hours: 3,990 h, total length: 2,580 mm, driver cabin: other, construction height: 2,060 mm, fuel: electricity, load capacity: 1,500 kg, The Toyota 7FBEST 15 is a used 3-wheel forklift with electric drive that can be used efficiently and compactly for various commercial purposes. The forklift was built in 2014 and has 3,990 operating hours behind it. With a lifting height of up to 3 meters, the duplex mast enables reliable handling of loads. Equipped with a Pb-Gel battery with a capacity of 24V and 10.9 kWh, this forklift offers solid performance for medium to long operating times. The Toyota 7FBEST 15 is equipped with an automatic transmission and has a seat for the operator. Its dimensions Laodpfxsr Uzq Uj Akwoh are 2,580 mm in length, 990 mm in width and 2,055 mm in height, with the permissible total weight being 3,025 kg. The red colour ensures good visibility in the workplace, increases work safety and makes it easier to recognise the vehicle. This machine is ideal for those looking for a reliable and proven solution for their transport and lifting needs in warehouses or on construction sites. Please note that a charger is not included and the sale is only to commercial customers or for export. A viewing can take place without prior appointment to personally check the quality and functionality of the forklift. Only sold to commercial customers (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.