Used Dcm Leopard Lma for sale (1,436)

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. Nedpfx Akoyx Uy Aeijlh • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 454 31178 T15, Max. master reel width: 1400 mm Max. master reel weight: 1000 kg Max. master reel diameter: 1000 mm Minimum standard slit: 25 mm Rewinding reel maximum diameter: 610mm Maximum production speed: 1000m/min Separated shaftless unwinder Automatic positioning of the web guide camera Razor blades/circular knives/pneumatic knives with automatic slit positioning ASP Automatic tape applicator Linear lay-on rollers 4 differential or pneumatic shafts, mounted on two turrets with automatic reel change Automatic slit reel unloading and positioning Automatic core positioning Nljdpjzhwgbjfx Akieh 6 motors Automatic web tension control through loading cells The machine has chucks for 76 and 152mm The machine has positioning for top knife AND bottom knife; the Automatic Slit Positioning handles the positioning of both the knife and the counter knife APPLICATIONS: Bags, Food packaging, Outer packing, Soft drinks/mineral waters labelling, Aluminum covers for pharmaceuticals MATERIALS: PE, Aluminium, Papers & Laminates

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical Data Material: Printed or unprinted shrink films Film types: PVC, PET, OPS shrink film Film thickness: approx. 28–100 µm Minimum sleeve width: approx. 50 mm Maximum sleeve width: approx. 300 mm Maximum unwind diameter: approx. 600 mm Maximum rewind diameter: approx. 600 mm Sleeve width tolerance: approx. +/- 0.15 mm Outer web overlap: approx. 0–1 mm Glue position: Adjustable Maximum production speed: Up to 500 m/min Maximum sleeve roll weight: approx. 50 kg standard Power supply: 240 V / 50 Hz Compressed air: Minimum 6 bar, dry and oil-free, approx. 40 litres/min _____ Machine Configuration Based on available information, the machine is equipped with the following main units: Unwinding Section • Unwinding unit • Cantilevered unwind shaft • Pneumatic arm for supporting the master roll • Core adapter for 76 mm core diameter • Core adapter for 152 mm core diameter • Electromagnetic brake controlled by an ultrasonic sensor • Automatic web guiding with ultrasonic sensor Gluing / Solvent Application Nsdozka T Ajpfx Akislh • Solvent application unit for gluing • Pressurized solvent tank • Speed-dependent glue quantity control • Adjustable glue seam position Sleeve Forming Section • Longitudinal pre-cutting / perforation unit with two perforation wheels • Semi-automatic forming tool for sleeve widths from approx. 50 to 300 mm • Adjustable guide rollers for sleeve forming • Roller sets for laying the film around the forming bar • DCM control system for sleeve width measurement Rewinding Section • Rewinding unit • Machine control cabinet • Touchscreen control

Condition: refurbished (used), Equipment: documentation/manual, saw blade guard, scorer, Costa Leopard SS2 – multi-blade saw 2-axis multi-blade saw Shaft diameter: 80 mm Number of saw blades per shaft: 16 Maximum cutting thickness: 145 mm Saw motor power: 92 - 92 kW Nodpfx As Ad Uwgskislh

Condition: used, Year of construction: 1986, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, disc diameter: 350 mm, A.COSTA LEOPARD /2/75 Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Maximum disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Nledpfx Akswi I Hkjioh Electric height adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-expel latches Weight: ± 5,500 kg 2 spare sleeves and spacers Infeed table: Infeed table connected to the main machine. Total length: 400 cm Number of rollers: 2 straight, 14 inclined. TOTAL: 16 lower rollers + 2 upper rollers Upper rollers with pneumatic pressure

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Njdpfxjykrxlo Akislh

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, The machine is in very good condition, runs quietly, and operates with precision. Njdjz N Adgjpfx Akiolh TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 m/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Control: Heidenhain 530 (MC422) Tool holder: SK 40 Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Internal coolant supply (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing unit Filtration system Note: The probing system is not included in the scope of delivery.

Year of construction: 2017, condition: used, empty load weight: 60 kg, Manufacturing year: 2017 Power: 2200 watts Nodpfez Ew Eiex Akijlh Voltage: 230 volts Weight: 60 kg Well-maintained floor sander. Multiple units in stock. Price: € 750,- ex VAT

Condition: ready for operation (used), Year of construction: 2019, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: ML0336-000164, travel distance X-axis: 205 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 6,000 rpm, bar diameter (max.): 51 mm, controller model: Siemens S828D, TECHNICAL DETAILS Main spindle speed: max. 6,000 rpm Travel in X-axis: 205 mm Travel in Z-axis: 560 mm Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 36 m/min Swinging diameter over bed / turret: 600 / 400 mm Torque: 127 Nm Hydraulic 3-jaw chuck: 170 mm Workpiece size: max. Ø 300 × 510 mm Bar diameter: max. 51 mm Chuck outer diameter: 152 mm Tool stations: 12 Tool cross-section: 20 × 20 mm Tools: max. 24 Turret indexing time: 0.11 s MACHINE DETAILS Control model: Siemens S828D Main motor power: 12.6 kW Power of driven tools: 6.2 kW High-pressure coolant pressure: 0.7 MPa Dimensions & Weight Machine dimensions (L × W × H): 2,540 × 1,595 × 1,693 mm Machine weight: 3,480 kg Nledpfszzx Igjx Akijh Operating hours: 43,500 h EQUIPMENT High-pressure coolant system, 0.7 MPa Transformer Chip conveyor Tool measurement / tool probe Collet chuck with 3 collets LNS bar feeder for bars up to max. 1.5 m length Workpiece catcher and ejection system Tool load monitoring CE conformity Highly rigid cast iron machine bed 12-position turret with accommodation for max. 24 tools Automatic bar feeder Oil separator for coolant Roller-guided linear guides Documentation/manual Spindle speed continuously adjustable

Condition: used, cutting height (max.): 200 mm, cutting width (max.): 380 mm, saw blade diameter: 350 mm, total length: 3,000 mm, total width: 2,200 mm, total height: 1,900 mm, overall weight: 5,000 kg, A. COSTA LEOPARD double-shaft wide belt sander, 2x75kW (100hp) Nljdpfx Ajy Rzygjkioh

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Njdpfszhh Uvex Akijlh Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: ready for operation (used), Simens 6RA8025-6GS22-0AA0 SINAMICS DCM DC-Converter SN: Q6H22450101, used, good condition, 100% functional, scope of delivery as per photos Nedpfx Asz Acyiokiolh

Condition: used, Year of construction: 2022, - Brand : Comet - Type: Leopard 25 - Year of construction: 2025 - Weight: 4070 kg. - Hours : 652 hours - Drive: Petrol + 220 volts - Working height: 25.5 meters - Lateral reach: 11.5 meters - Lifting capacity: 200 kg. - Remote control - Adjustable tracks - Rotatable work tray - New safety inspection - Aerial work platform book available - CE document available - Video on our website - Trade-in and transport possible * Brand: Comet *Type: Leopard 25 * Construction year: 2025 * Weight: 4070 kg. * Hours: 652 hours * Drive: Petrol + 220 volts * Working height: 25.5 meters * Lateral reach: 11.5 meters Nlodswhqifopfx Akieh * Lifting capacity: 200 kg.

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, power: 168 kW (228.42 HP), fork carriage width: 2,900 mm, fork length: 2,400 mm, empty load weight: 41,000 kg, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift - Diesel Load center: 1200 Fork width: 250 mm Fork thickness: 110 mm ISO class: Terminal West Mast type: Duplex Transmission: Clark HR32000 - overhauled in 2021 Condition: Ready for use and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 14.00-24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Nodpfx Akj Afq Ecjislh Rear tire size: 14.00-24 Rear tire condition: 60 - 80% Side shifter, fork positioner New: forks, lifting chains, front tires

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 18378, operating hours of spindle: 30,620 h, For sale is a highly precise and dynamic 5-axis CNC universal machining center from the renowned manufacturer DECKEL MAHO, model DMU 80 P hi-dyn, manufactured in 2000. This machine comes from the proven "hi-dyn" series (High Dynamics), which is characterized by extremely fast rapid traverse speeds, high acceleration values, and a robust portal design. It is ideally suited for highly precise 5-sided and 5-axis simultaneous machining in demanding tool, mold, and prototype manufacturing. The machine is in a ready-to-use condition and impresses with the combination of large travel ranges, an NC rotary table, and the stable machine kinematics. Equipment: - Rotary table - mounted special clamping device - 2 precision vises - viewing window - Heidenhain TNC426 control system - 60-tool changer SK40 - chip conveyor Nlsdpfx Ao Afphiskish - separate coolant preparation system with band filter

Condition: used, DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Girder (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist and guide the load. Application Nsdehwd E Nepfx Akijlh High-quality and sensitive parts can be lifted, lowered and positioned more gently and safely. Installation processes and assembly operations can be controlled more precisely. Lifting movements can be carried out much faster thanks to the almost twice as high nominal speed per lift in the partial load range. Design - plug and lift - all electrical connections of the chain hoist are pluggable - with a foldable, universal suspension bracket, the hoist can be easily attached to the frame - fatigue-free operation thanks to the ergonomically optimized and robust DSC control switch - quick change of the entire chain drive without disassembly of motor or gearbox parts - contactor control 24 V, protection class IP55 - operating hour counter - limit switch for upper/lower hook position - high safety and long service life thanks to the speed-monitored brake/slip clutch principle Advantage - One-hand operation, i.e. the control unit is located above the part to be handled (left- and right-hand operation via rocker switch) - Quick-change coupling enables universal use through easy exchange of the various load handling devices Technical data Brand DEMAG EAN 4039247450527 Manufacturer Article Number 93200146 Load capacity 80 kg Lifting height 2.8 m Lifting speed control In 2 stages Lifting speed fine lift 4 m/min Lifting speed main lift 16 m/min Number of load strands 1 piece Overall height (H) 694 mm Length 422 mm Depth 268 mm Model DCM-Pro 2-80 V16/4 Control unit GSA Type 4 Color Azure blue RAL 5009 Mandatory testing according to DGUV (UVV) Yes Delivery unit 1 Gross weight 25.000 kg Range of movement: 3 meters to the side and 2 meters forward/backward Condition: used You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, engines - 55 and 55 kW feed motor - 7.5 kW height adjustment motor - 1.1 kW cutting height - 200 mm cutting width - 350 mm blade saw diameter max.- 300 mm spindle diameter - 2 x 60 mm sleeve diameter - 2 x 70 mm track width - 350 mm total power - 119 kW electric feed regulation automatic central lubrication minimum length of the element - 600 mm electric height adjustment shaft height adjustment six upper pressure rollers pneumatic clamps five anti-ejection pawls ruler stub diameter - 220 mm spindle speed - 4500 RPM dimensions of the machine (length / width / height) - 275 / 235 / 210 cm weight - ~ 7000 kg Feeders: max. cutting length - 1850 mm min. cutting length - 800 mm max. material length - 2500 mm min. material length - 600 mm max. material width - 700 mm Nlsdpfowrw D Rjx Akish max. material height - 200 mm roll width - 700 mm roll diameter - 130 mm number of rolls - 26 3 smooth pressure rollers 4 toothed pulling rollers feed adjustable on the inverter 0-70 m/min. central lubrication of saw guides power of the saw motor - 2 x 9.2 kW feed motor power - 1.5 kW power of the disc spreading motor - 3 kW chain motor power - 1.1 kW dimensions (length / width / height) - 7050 / 2100 / 1850 mm

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm - Width of track: 350 mm - 2 x 55 KW / 75 HP - Weight: around 5 tons Nlsdovf Dagspfx Akioh

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm Nlsdpjw H R R Hefx Akioh – weight: approx. 5000 kg

Condition: used, Year of construction: 2006, operating hours: 39,500 h, functionality: fully functional, machine/vehicle number: 15425021604, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 35 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 2,700 mm, total length: 2,800 mm, total width: 2,800 mm, table length: 1,200 mm, rotational speed (min.): 12,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 16,075 h, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: DC, Equipment: documentation/manual, Vertical machining center DMG Deckel Maho DMC 1035 V, year of manufacture 2006. Nlodoz I Dl Ispfx Akioh Machine has only processed plastics – in good condition! Year of manufacture: 2006 Machine number: 15425021604 Condition: Good Delivery terms: Free on board (FOB) Location: 97944 Boxberg, Germany Payment terms: Prepayment – by bank transfer Internal No.: 180-1 Can be inspected while powered on: Yes Technical data: - Operating hours (machine running): approx. 39,447 h (will increase slightly) - Spindle hours: 16,075 h (will increase slightly) - Tool holder: SK40 - Max. spindle speed: 12,000 rpm - Tool magazine: 30 positions - Table dimensions: 1200 x 560 mm - Control system: Heidenhain iTNC 530 - Travels X / Y / Z: 1035 / 560 / 510 mm - 400 V / 50 Hz / 35 kVA Scope of delivery: - Manuals and documentation - Wireless measuring probe Heidenhain TS640 - Handwheel - Programmable 4th axis Lehmann - Clamping angle - Manual dividing head - Swiveling vice Note: The vices on the machine table and the tool holders in the magazine are not included in the scope of delivery! Dimensions & weights: - Installation dimensions L x W x H approx.: 2800 x 2800 x 2700 mm - Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ► On request, we can offer transport to the desired location. ► The quoted price is net, plus VAT. ► The goods are sold with the exclusion of any warranty. ► Technical data subject to change without notice. ► Subject to prior sale. ❗The sale of the goods is exclusively to business customers!❗

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – year of manufacture 2022 – like new, including accessories For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer in Itterbeck, Made in Germany), with an upstream bulk material hopper 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Nledpfxsz Tda Ro Akijh Condition: – Like new, hardly used – Fully functional – Inspection and test run possible by arrangement Included in the scope of delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller device, and aluminum spring tensioner (load capacity 4–6 kg) – new price €825 net – 2× hand sewing machine Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread chain separator, 90 W) – new price €1,425 each net New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,000 net plus VAT (11,900 € gross) for the complete package, negotiable – VAT can be shown separately. Collection & shipping: – Location: 31848 Bad Münder am Deister – Loading will be assisted – Shipping by freight forwarder possible for an extra charge

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, located in 45891 Gelsenkirchen, is a Seydelmann Konti cutter, model KK 140 AC-6. The cutter was manufactured in 2023, is used, and comes from a business liquidation. Currently, the cutter is still connected to power and can be inspected by appointment. Njdpfxoz Iznte Akielh We will gladly provide you with the technical specifications upon request if you are interested in purchasing it. Dismantling and loading are the responsibility of the buyer.

Condition: good (used), Year of construction: 2023, functionality: fully functional, For sale, available from our location in 45891 Gelsenkirchen, is a set of two ULMA VTI 440 packaging machines. The packaging machines were manufactured in 2023, are used, and come from a business liquidation. Njdpfx Akez Izy Neiolh Currently, the packaging machines are still connected to the power supply and can be inspected after scheduling an appointment. For technical data, please contact the manufacturer. Dismantling and loading are the responsibility of the buyer.

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm Nodjfbma Njpfx Akiolh -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Seydelmann AE-130-3B automatic bowl chopper with infeed system for 200L mixing containers. Sold on behalf of a customer; functional machine, no warranty, no returns. Nlsdjzmih Iepfx Akish