Used Criss-Cross Receiving Tray for sale (12,755)

Condition: used, Year of construction: 2006, Criss-Cross Auslage / Criss-Cross Receiving Tray Horizon SW-12Year 2006 - Serial-No. 101117 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Rcjdpoh N Tncjfx Almsb

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Redpfx Aeu Tg I Djlmecb Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: like new (used), Range (in depending on the lighting conditions) until: 15 m Range with laser receiver: 30 m, & more 5 m: leveling accuracy +/-1 mm Self leveling range: 4° +-0,5 ° Accuracy of the horizontal line at 5 m: +-1.5 mm Redpfed Ecncjx Almjcb Accuracy of vertical line at 3 m +-0.75 mm Number of laser lines: 2 Weight: 485 g

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM Rcsdefv Hphopfx Almeb The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Year of construction: 2015, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, Cheops Tray shrink packer Made By CHEOPS spol. s r.o. TERMOPAK 400TP – upto 400 Trays per hour Ability to pack tray+ film, Film only or pad+film For use with pop-lock or pre made trays – existing cardboard supplier details can be provided, along with existing cutters. Lifters and frames for the following formats : 200ml bottles – 24 pack 250ml bottles – 24 pack 330ml bottles – 12/24 pack 500ml 1914 style tall bottles – 12 pack 750ml bottles – 12 pack Lifting heads for: 500ml stumpy bottles – 8/12 pack Rcodpfxsx Dantj Almjb In use till end of January 2026 We used on glass but with different heads could pack PET / Cans. Selling as increased production capacity.

Condition: like new (used), Large tray sealer direct from UK meat factory where it was packing ground meat in MAP trays. Rcedoilfkropfx Almob We have two identical machines available.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Rcedoyngniepfx Almsb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, 1 x Packaging Automation Ltd inline sealing machine. Supplied with 3 x sets of tooling for different sized punnets and some spare parts. This unit was purchased new and run for 6 x months per year. Model – Eclipse SL4. Serial number – EC34-MC-00214. Date of manufacture – 2021. Maximum output - up to 75 packs/minute (with the 5x1 format tooling setup). Tooling: Tooling Set 1 - 5 x 1 format with arms. THERMOFORM 773 / ECSL4-TL-00644 / Seal RL=669mm. Tooling Set 2 - 4 x 1 format with arms. TERMOFORMAS 691 TRAYS / ECSL4-TL-00150 / Seal RL=581.75mm. Tooling Set 3 - 4 x 1 format with arms. PACTOV 5550 TRAY / ECSL4-TL-00159 / Seal RL=531mm. Rcedpfxsy S E S Aj Almeb Belt width - 290mm wide. Overall dimensions - 3200mm long x 1000mm wide x 2000mm high. Weight - 800 kg. In excellent working condition.

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Voltage: 230 V Rcodju R S I Hjpfx Almsb

Condition: new, GRAULE ZS 85 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 85 N cross-cut and mitre saw - inclinable - Material feed shoulder made of laminated wood - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 85 N to ZS 170 Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Rcjdpfju R Sycjx Almsb Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine -

Condition: new, GRAULE ZS 170 N cross-cut and mitre saw - tiltable - Includes: - GRAULE ZS 170 N cross-cut and mitre saw - tiltable - - without machine stand and saw blade - Including: - GRAULE machine stand for type ZS 135 N and ZS 170 N Includes: - GRAULE type RO feed roller conveyor complete with support feet and connection bracket Plastic rollers with ball bearings Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm Includes: - GRAULE type RLK roller conveyor/length stop with scale and material stop that can be folded back. Ball bearing mounted plastic rollers Ø 40 mm, Roller width 300 mm, roller spacing approx. 300 mm, Support feet for roller conveyor height 885 +/- 10 mm - new exhibition machine - Redeu R Sypjpfx Almscb

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2026, volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Rcedpey S Ru Asfx Almob

Condition: used, band length ca. 1.700 mm + 2.700 mm Rcodpfx Alsv Hgb Nemjb cutting width max. 2.500 mm Cutting height max. ca. 80 mm

Condition: used, This line was filling trays of coleslaw and potato salad. 3 lane machine with 2 x 3 head depositors. Rcedpfx Aloqpd Svjmjb

Condition: new, Year of construction: 2024, functionality: fully functional, total width: 600 mm, total length: 1,200 mm, total height: 2,300 mm, overall weight: 150 kg, type of input current: three-phase, input voltage: 400 V, working range: 400 mm, product height (max.): 30 mm, warranty duration: 12 months, controller model: SPS-Steuerung Siemens Simatic HMI, input frequency: 50 Hz, compressed air connection: 6 bar, load capacity per stand: 50 kg, positioning accuracy: 1 mm, Equipment: CE marking, documentation/manual, lighting, safety light barrier, Feeding and storage system for light articles in trays. Feeding of trays for magazine storage in automated production. Especially for surface or contour sensitive parts. Rsdpeyycqxjfx Almocb Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm. • Fast tray change time (4-8 seconds) • Tray weight incl. workpieces max. 5kg • Tray stacker weight max. 50kg • Positioning accuracy ± 1mm • PLC control with operating and monitoring display • ESD equipment • Safety package light curtain - Leuze for tray stacker • Preparation communication AGV - Siemens IWLAN client • RFID read-write head • Autonomy time increase 1 stack • Machine safety: active door interlock • Low space requirement, due to compact design • Flexible adaptation to different machines, due to different interfaces • Low investment costs • Complete equipment • Stable design • (solid steel construction, powder coated) • No machine adapters necessary • Supply voltage 400V / 50Hz / 3ph • Compressed air connection min. 6bar • Dimension: 1200 x 600 x 2300mm (LWH)

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos Rodpfxort Uw Ro Almocb All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: used, suitable for UNITEC 10 or similar, year of manufacture: 1998 CNC motorised control, Quantity: 2 Rjdpfx Aolkckmolmocb Price per unit: €2,000.00 + VAT

Condition: used, - d1 = 30 mm, - d2 = 27 mm (wrench size), - Total length: 110 mm, Rjdpfx Aslkcg Rjlmscb - Available: 3 pcs Price per piece: €25.00 + VAT,

Condition: used, - d1 = 30 mm, - d2 = 27 mm (wrench size), - Total length: 215 mm, - Available: 2 pcs. Price per piece: €45.00 + VAT. Rjdpfxelkcgis Almecb

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, 1 x G. Mondini S.p.a. inline heat sealing machine fitted with ICE Zodiac thermal transfer overprinter. Supplied with User Manual, Electrical Diagrams, 4 x sets of tooling with arms for different sized punnets and 1 x tool trolley. Redpfsy Hl E Sex Almjcb Model – SF 90. Serial number – 3713/09-1. Date of manufacture – 2009. Tooling set 1 - Infia K62, 4 x 1 format, square punnets 163mm long x 163mm wide (approx). Tooling set 2 - Proseal SPL, 2 x 1 format, 270mm long x 174mm wide (approx). Tooling set 3 - T1478X PS48213, 5 x 1 format, 174mm long x 132mm wide (approx). Tooling set 4 - details TBC. Overall dimensions - 4220mm long x 900mm wide x 2150mm high. Tooling trolley dimensions - 1300mm long x 750mm wide x 1750mm high.

Condition: used, Year of construction: 2004, functionality: fully functional, We are offering this used WEINIG Dimter OPTICUT S75-4 cross-cut saw line optimization system, manufactured in 2004, for sale. Manufacturer: WEINIG Dimter Model: OPTICUT S75-4 Year of manufacture: 2004 Condition: used Category ID: 171 Type ID: 2446 Type: cross-cut saw line optimization system If you have any questions or would like more information, please do not hesitate to send us a message or call us. Rjdsy S T Uxepfx Almecb

Condition: good (used), approx. 900 pieces shelf dividers (continuous) for shelf racks 30cm - used - : Prices per piece ex location: 2,50 € (net) disassembled, packed and loaded! Manufacturer: SSI Schäfer type: would have to TR 3330 Year of manufacture: unknown Rcjdpski Tq Isfx Almsb Height: approx. 33cm height incl. "lugs": ca. 36cm Depth: ca. 26cm - for shelf depth 30cm Galvanized Original price: ca. 7.-€ Condition: good Available: immediately Location: Warehouse Frankenberg (Saxony)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1.490,14, saw blade diameter: 500 mm, cutting height (max.): 140 mm, cutting width (max.): 350 mm, power: 8 kW (10.88 HP), overall weight: 2,000 kg, TECHNICAL DETAILS Max. saw blade length: 6,100 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Max. cutting height: 140 mm Max. cutting width: 350 mm Infeed table length: 7,850 mm Outfeed table length: 2,400 mm MACHINE DETAILS Main motor power: 5.5 kW Total power: 8.0 kW Voltage: 400 V Fuse: 25 A Rjdpfx Alsy Nyd Ismjcb Dimensions & Weight Dimensions (L x W x H): 11,250 x 800 x 1,600 mm Weight: 2,000 kg EQUIPMENT Automatic feed system

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: B725, cutting height (max.): 150 mm, cutting width (max.): 300 mm, table length: 3,000 mm, saw blade length: 3,570 mm, Equipment: CE marking, TECHNICAL DETAILS Rcsdpoy Nxynjfx Almsb Max. saw blade length: 3,570 mm Max. cutting width: 300 mm Max. cutting height: 150 mm Max. saw blade diameter: 500 mm Saw blade arbor diameter: 35 mm Infeed table length: 3,000 mm Outfeed table length: 3,000 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 5.5 kW Main motor power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 3,900 x 1,100 x 1,650 mm Transport weight: 700 kg Transport packages: 3 EQUIPMENT CE marking

Condition: used, Year of construction: 2001, total height: 1,700 mm, total length: 1,500 mm, total width: 1,200 mm, - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 263989 - Max. saw width [mm]: 380 - Max. saw blade diameter [mm]: 550 - Arbor saw blade diameter [mm]: 30 - Voltage [V]: 400 - Current consumption [A]: 14.5 - Power [kW]: 5.7 - Transport dimensions: 1500mm x 1200mm x 1700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Rodoxdl E Rjpfx Almjcb VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels