Used Control Accessories for sale (62,926)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 10,000 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 550 mm Travel range, Y-axis: 410 mm Travel range, Z-axis: 450 mm Travel range, B-axis: -110 to +110° Travel range, C-axis: 360° Distance, pallet surface to spindle center line: -20 to 430 mm Distance, B-axis center to spindle center line: -40 to 410 mm Distance, B-axis center to spindle center line: -20 mm Distance, pallet center to Z zero point: 265 mm Distance, pallet center to Y zero point: 180 mm Pallet Work area on the pallet: Ø 130 mm Pallet load capacity: 40 kg Max. workpiece size: Ø 250 × 250 mm Pallet mounting surface: 4 × M12 × 1.75 Distance, pallet bottom to pallet surface: 970 mm Pallet indexing, B/C-axis: 0.001° / 0.001° Pallet change time, B-axis: 1.2 s/90° Pallet change time, C-axis: 0.9 s/90° Pallet change time, C-axis: 1.2 s/180° Pallet change time, C-axis: 1.4 s/270° Pallet torque, B-axis: 1,070 Nm Pallet torque, C-axis: 192 Nm Pallet braking torque, B-axis: 1,112 Nm Pallet braking torque, C-axis: 500 Nm Spindle Spindle speed: 50 to 15,000 rpm Spindle speed change: 5-digit direct S-command Tool holder: SK 40 Spindle taper: 7/24, taper No. 40 Inner diameter of spindle bearing: 70 mm Max. spindle torque: 65.1 Nm at 1,100 min⁻¹ Spindle air blow: Standard Spindle alignment: Standard Tool clamping force: 7.0 kN Tool changer Tool magazine capacity: 240 positions Tool shank: JIS B 6339, tool shank 40T Pull stud type: JIS B 6339, pull stud 40P Max. tool diameter: 80 mm Max. tool diameter with free secondary stations: 150 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool selection: Fixed address system Nwsdpfx Acjz D Taae Ajl Tool change arm: W-gripper type Feed rates Rapid traverse, X/Y/Z-axis: 50 m/min Rapid traverse, B-axis: 30 min⁻¹ Rapid traverse, C-axis: 50 min⁻¹ Feed rate, X/Y/Z-axis: 1 to 50 m/min Feed rate, B-axis: 30 min⁻¹ Feed rate, C-axis: 50 min⁻¹ Rapid traverse acceleration, X/Y/Z-axis: 0.6 G Rapid traverse acceleration, B/C-axis: 2,500 / 2,000 °/s² Max. acceleration during cutting feed, X/Y/Z-axis: 0.4 G Max. acceleration during cutting feed, B/C-axis: 2,000 / 4,000 °/s² Dwell feed rate, X/Y/Z-axis: 0 to 4000 mm/min Dwell feed rate, B/C-axis: 0 to 11.11 min⁻¹ Min. motion increment, X/Y/Z-axis: 0.001 mm Min. motion increment, B/C-axis: 0.001° MACHINE DETAILS Control: MATSUURA G-TECH 840 DI Serial number: 350536 Electrical connection values Rated apparent power: 36 kVA Input voltage: 415 V Input frequency: 50 Hz Input current: 50 A Dimensions and weight Overall length: 6,000 mm Overall width: 5,000 mm Overall height: 3,500 mm Overall weight: 15,000 kg EQUIPMENT Chip conveyor Coolant system Tool holders in the tool changer External reference: Hanon - Lot 1

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 800 kg, total height: 2,410 mm, total width: 2,110 mm, total length: 2,334 mm, table width: 400 mm, type of input current: three-phase, distance table to quill: 310,660 mm, table length: 700 mm, workpiece length (max.): 850 mm, workpiece width (max.): 850 mm, workpiece height (max.): 380 mm, input voltage: 415 V, overall weight: 2,500 kg, table load: 800 kg, input frequency: 50 Hz, tank capacity: 450 l, Equipment: documentation/manual, 2023 Excetek ED400C CNC Die Sink EDM Machine Used 2023 Excetek ED400C CNC Die Sink EDM Machine for Sale – C-Axis – EROWA 4-Station Automatic Tool Changer – Spinflo Oil Cooler – Magnetic Chuck – ViTiny Digital Microscope Manufacturer: Excetek Model: ED400C Machine Type: CNC Die Sink EDM / Sinker EDM / Spark Erosion Machine Year: 2023 Condition: Excellent Machine Description Modern 2023 Excetek ED400C CNC Die Sink EDM machine available for sale with an excellent specification and useful additional tooling and accessories. The Excetek ED400C is a compact CNC spark erosion / sinker EDM designed for accurate machining of complex cavities, moulds, dies, precision components and difficult-to-machine conductive materials. This machine is particularly well equipped and includes a C-axis, EROWA tooling, 4-station automatic EROWA tool changer, 600 x 200mm magnetic chuck, Spinflo ECEA oil cooler and ViTiny digital microscope with display screen. Main Machine Specification X-axis Travel: 400mm Y-axis Travel: 300mm Z-axis Travel: 350mm Worktable Size: 700 x 400mm Maximum Workpiece Size: 850 x 850 x 380mm Maximum Workpiece Weight: 800kg Maximum Electrode Weight: 120kg Electrode Head to Worktable Distance: 310–660mm Approx. Machine Dimensions: 2,334 x 2,110 x 2,410mm Machine Weight: Approx. 2,500kg Dielectric Oil Filtration System The ED400C is supplied with an integrated oil filtration arrangement. Oil filter tank capacity: Approx. 450 litres Paper filters: 3 A clean and stable dielectric oil system is important for maintaining consistent EDM performance, flushing efficiency and surface finish during spark erosion operations. Spinflo ECEA Oil Cooler The machine includes a Spinflo ECEA oil cooler / dielectric chiller. C-Axis The ED400C is equipped with a C-axis, allowing controlled rotary positioning of the electrode. EROWA 4-Station Automatic Tool Changer The machine is fitted with a 4-position automatic EROWA tool changer. This enables several electrodes to be loaded and automatically changed during a machining cycle, helping increase unattended machining capability and reducing operator intervention The machine also includes EROWA tooling, providing a recognised precision electrode holding and referencing system. 600 x 200mm Magnetic Chuck Included with the machine is a: 600 x 200mm magnetic chuck This provides an additional workholding option for suitable ferrous components and adds to the versatility of the machine for general precision EDM work. ViTiny Digital Microscope & Screen The machine also includes a ViTiny digital microscope with separate display screen. A digital microscope is particularly useful for close inspection of electrodes, fine features and machined surfaces and can assist with setup, inspection and process verification. Nwjdpfxez E A Hxe Ac Aol Key Equipment Included Excetek ED400C CNC die-sink EDM C-axis EROWA tooling 4-station automatic EROWA tool changer Spinflo ECEA dielectric oil cooler 600 x 200mm magnetic chuck ViTiny digital microscope ViTiny display screen Integrated dielectric filtration system Approx. 450-litre oil tank 3 paper filters CNC control and EDM generator Please Note: All specifications, dimensions, capacities, accessories and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Accessories: Nwodpox Rqt Njfx Ac Ajl Control system Manufacturer: Allen Bradley Type: Ethernet 10/100 Adapter 1794-AENT (28685 IV)

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Nwsdpjzxgtfefx Ac Aol Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement.

Condition: excellent (used), Control accessory Manufacturer: Alleen Bradley Logi Pac Nsdpfox Rqu Hex Ac Aswl 1756-L61 (28685 II)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 37,000 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Laser power: 3,200 watts Travel range, X-axis: 2,500 mm Travel range, Y-axis: 1,250 mm Travel range, Z-axis: 115 mm Sheet thickness, structural steel max.: approx. 20 mm Sheet thickness, stainless steel max.: approx. 15 mm Sheet thickness, aluminum max.: approx. 8 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Total connected load approx.: 88 kVA Machine hours: 74,000 h Beam hours: 37,000 h Dimensions & Weight Footprint: 8,660 x 6,110 x 2,700 mm Machine weight: approx. 7,300 kg EQUIPMENT Closed machine frame with integrated laser unit Automatic pallet changer TFT color screen Positioning laser diode Spray device Motion unit for high-precision machining Additional high-dynamic Yp axis Drives with maintenance-free three-phase servomotors Closed beam guidance Conveyor for small parts and waste TRUMPF laser CO2 laser TruFlow 3200 High-frequency excitation Low-maintenance turbo radial blower Gas mixer (integrated) Laser power control Laser logbook function Laser cutting head with 5" lens Laser cutting head with 7.5" lens Universal quick-change device ControlLine Control system SINUMERIK 840D Automatic shut-off ContourLine SprintLine Teleservice Microweld RJ45 network connection Network connection via telediagnostics CE marking Light barriers Nwsdpfx Acoz A D Ire Ajl Multi-chamber extraction system Compact dust collection system

Condition: like new (used), Year of construction: 2023, functionality: fully functional, 4 Wagner TWINCONTROL 2k paint application systems, color spraying systems 2 x low-pressure systems, used only once for testing purposes 2 x Airmix systems, little used, in new condition Each system consists of 3 piston pumps: 1 x for the base component 1 x for the hardener component 1 x for flushing with accessories On request, also available with stainless steel storage tanks with agitator, 2 x new, 2 x demonstration units Can also be purchased separately Ideal for series production and automation EX version, as it operates only with compressed air Purchase or lease takeover possible See also document in the appendix (designations) Price description: Two systems always belong together. One system for priming, one system for painting. 1. Twin Control low-pressure (AirCode), either sales price 59,000 euros or lease takeover 1,530 euros/month + 17,000 euros takeover 2. Twin Control high-pressure (Airmix), either sales price 62,000 euros or lease takeover 1,535 euros/month + 19,000 euros takeover Lease takeover subject to: Agreement from the leasing company 3. Stainless steel storage tanks (2 new) with agitator, sales price 3,200 euros Nodpfx Ajzk A H Ejc Aewl 4. Stainless steel storage tanks (2 used) with agitator, sales price 2,400 euros If the complete package is taken over, the price is negotiable.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, For sale is a machinery package consisting of 10 robot arms from the manufacturer ABB, along with the necessary accessories! The package is composed as follows: 8x Welding robots for external connection 2x Handling robots 10x Control cabinet 10x Main power cable for robot cabinet 10x Communication cable for robot cabinet 10x Panel with connection cable to the cabinet 1x 40" HC sea container TECHNICAL DETAILS Reach: 2.55 m Handling capacity: 235 kg Center of gravity of the payload: 300 mm Wrist torque: 1,324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm MACHINE DETAILS Control cabinet type: IRC5 M2004 Operating panel: FlexPendant Operating panel model: DSQC 679 Input voltage: 3 × 400 V AC Frequency: 50–60 Hz Current consumption: 20 A Operating hours: between 28,500 and 39,000 hours EQUIPMENT Cable set for main connection cabinet–robot Leoni mounting Cable set for handling or welding Note regarding dismantling and loading: As can be seen in the pictures, the manipulators are located in the 40" HC container. The robots are screwed onto the pallets (with 2 screws each), and the control cabinet is secured to the pallet with lashing straps. Further securing/lashing must be carried out by the buyer. Nsdez D H Hyspfx Ac Ajwl

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: Nwsdpsz A Tbusfx Ac Asl IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 28,500 h, functionality: fully functional, load capacity: 235 kg, arm reach: 2,550 mm, load center: 300 mm, torque: 1,324 Nm, positioning accuracy: 0.07 mm, LOT scope: 3x welding robots for external connection 2x handling robots 5x control cabinets 5x main power cable for robot cabinet 5x communication cable for robot cabinet 5x panel with supply line to the cabinet Operating hours: between 28,500 and 39,000 hours Manufacturer: ABB Model: IRB 6640-235/2.55 Type: IRB 6640 M2004 Reach: 2.55 m Handling capacity: 235 kg Nsdjz D H Drspfx Ac Ajwl Center of gravity of payload: 300 mm Wrist torque: 1324 Nm Positional repeatability: 0.07 mm Path repeatability: 0.7 mm 3x 400V AC 50-60 Hz 20 A Accessories: Control cabinet: Type: IRC5 M2004 Operating panel: FlexPendant Model: DSQC 679 Cable set: Main connection cabinet to robot Leoni add-on: Cable set for handling or welding

Condition: ready for operation (used), Year of construction: 2022, number of axes: 3, This XYZ PRINTING MfgPro230 xS 3D Printer machine was manufactured in the year 2022 in Taiwan. The machine disposes of a vacuum, accessories, powder separator and a Nitropur 800-POK Special air separator. Additional equipment • Material starter kit PA11 ESD BASF Machine Benefits Nedpfxsz E Hhas Ac Aswl Technical Machine Benefits • Sinterit fz154 sandblaster sls lisa, lisa pro, lisa x, nilsxyzpro mfgpro230 xs 3pl01xus00f 3d printer • Sinterit fz138/fz176 phs station 2022 incl. Separator • Interit fz101/fz188 atex vacuum cleaner 230v vacuum, accessories, powder separator • Air separator nitropur 800-pok special • Build volume: 230x230x230mm • Min. Layer thickness: 0,08mm • Max. Chamber temperature: 180°c • Operating software: buildware (control panel), slsware (slicer)

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg FEM class: FEM 3 Suitable for forklift load capacity: 3,000–5,000 kg Internal opening width: 70–940 mm Rotation range: 360° Fork length: 2,400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,350 x 1,000 mm Self-weight: 1,000 kg Originating machine: Linde E50HL EQUIPMENT 3rd, 4th, and 5th valve Rotating clamp with 360° rotation function Fork positioner Side shifter Fork, 2,400 mm long All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1013 Nedpozz Hzzefx Ac Ajwl

Condition: used, Year of construction: 2019, battery capacity: 1,376 Ah, battery voltage: 80 V, overall weight: 2,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Nwedpezz H Dpjfx Ac Asl Battery type: 8 PzS Nominal voltage: 80 V Capacity: 1,376 Ah Voltage in idle state: 88.89 V Suitable for: Linde E70 and E80 Dimensions & Weight Dimensions (L x W x H): 1,290 x 1,030 x 770 mm Net weight: 2,500 kg All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 1156

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Njdpfx Aszy Ngdoc Ajwl Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Year of construction: 2023, condition: new, functionality: fully functional, machine/vehicle number: B1JAU25/95, DN400 Ball Valve Assembly + Pneumatic Actuator (Valmet / Neles) 1) Description Manufacturer: Valmet Flow Control (Neles brand) Valve: M1JW400ASGA – Trunnion-mounted ball valve, PN10, DN400, body CF8M (AISI 316), graphite packing Actuator: B1JAU25/95 – Single-acting pneumatic actuator (spring to open), ISO 5211 / VDI/VDE interface, size 25, shaft bore Ø95 mm Mounting Plate: QX35K05HDM – Neles interface for valve/actuator coupling Year: 2023 Condition: New / never installed, stored in original wooden crate (photos available) Compliance: CE marking (ATEX if applicable to control accessories – see nameplate) 2) Construction & Materials Body: Stainless steel casting 1.4408 / CF8M Type: Trunnion-mounted quarter-turn ball valve (low operating torque, low ΔP) Seats / Packing: Graphite (for severe service, high temperature resistance, low friction) Flanges: industrial drilling (details available on request) 3) Performance (indicative / to be confirmed by serial datasheet) PN: 10 (body marked PN16 on associated part; can be delivered as PN10) Nominal diameter: DN400 Service: industrial fluids, air/gas, low-pressure steam, chemical/energy process, heavy-duty HVAC Mounting: single-acting actuator (spring fail-safe → opens in case of air supply failure) 4) Scope of Supply Complete pre-assembled valve with B1JAU25/95 actuator QX35K05HDM mounting plate Control block (solenoid valve/filtration/regulation) visible in the photo Wooden crate + protective materials 5) Applications Compressed air units / boosters (line isolation/bypass) Industrial processes (chemicals, energy, paper mills, incinerators, cement plants) Nwjdpfx Acjyhxppo Ajl Large flow industrial HVAC networks

Condition: repair required (used), Year of construction: 2002, operating hours: 20,300 h, For sale: Nodpfxsz E Hwbe Ac Aewl Manufacturer/Type: Deckel Maho, DMU 60 P hi-dyn, 5-axis machining center Year of manufacture: 2002 Information: Tool changer for 60 SK 40 tool holders, Mill Plus control system Current condition: The Y-axis travels out of round by 0.03 mm; the machine is currently not functioning because the hard drive needs to be replaced. Availability: Immediate Accessories: 3D measuring probe, machine manual

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller, complete with all accessories as shown in the pictures. Nsdpew N Rd Defx Ac Aewl

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, empty load weight: 550 kg, total length: 3,210 mm, total width: 1,162 mm, total height: 2,050 mm, discharge height: 1,080 mm, machine/vehicle number: 2211410, TECHNICAL DETAILS Capacity, light vegetables: max. 400 kg/h Capacity, heavy vegetables: max. 800 kg/h MACHINE DETAILS Voltage: 3~ 400 V Frequency: 50 Hz Connected load: 7 kW Fuse rating: 25 A Water content: 500 l Protection class: IPX4 Dimensions & Weight Dimensions (L x W x H): 3,120 x 1,162 x 2,050 mm Machine weight: 550 kg Loading height: 1,140 mm Unloading height: 1,080 mm EQUIPMENT Barbotage system Frequency-controlled pumps Inverter control Stainless steel design Conveyor belt with product discharge Nwedpfx Asz Ahnroc Aol Rinsing via spray device Height-adjustable feet Spiral water guide Extended and raised product discharge zone, special design Extension of the product discharge zone: 200 mm Documentation

Condition: like new (used), Year of construction: 2025, operating hours: 23 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, table width: 495 mm, table length: 1,321 mm, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, MACHINE INFORMATION Manufacturer : Haas Model: VF-4SS Year: 2025 Condition: (Used) Excellent like new / 23 Working Hours Control: HAAS NGC Accessories: Renishaw Spindle and tool probe, Swarf auger, TSC, Rigid Tapping, 4th & 5th Axis drives. MACHINE SPECIFICATIONS Control: HAAS NGC X Axis Travel: 1270mm Y Axis Travel: 508mm Nodpfx Acsz D Uwye Aewl Z Axis Travel: 635mm Max Workpiece Weight: 794kg Spindle Speed: 12,000rpm Table Size: 1321 x 495mm Tool Change Capacity: 30+1 Tool Size: BT40

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 8444-08, workpiece length (max.): 6,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum edge length: 6,000 mm Maximum material thickness: 1.25 mm Mechanical cutting device Hydraulic unit Flow rate of gear pump: 14.5 l/min Operating pressure: 140 bar Maximum pressure: 210 bar Electric motor power: 3 kW Motor speed: 1,450 rpm Voltage: 380 V Frequency: 50 Hz Oil tank capacity: 30 l Pressure gauge diameter: 63 mm Pressure gauge display range: 0–250 bar Pressure switch: 90 bar Hydraulic components Gear pump CPL 9 DQ Intermediate flange L25-2/004 Elastic coupling G 228/2P Return filter Fill and vent filter Oil level indicator Drain plug Glycerine pressure gauge Valve block with pressure, flow control, braking, and solenoid valves Hydraulic cylinders Number of hydraulic cylinders: 8 Type: GHZ-50 × 225-S spec. Piston rod with external thread M20 Length: 20 mm Swivel bearing at the rear Hydraulic motors Number of hydraulic motors: 4 Type: OMP 50 MACHINE DETAILS Control system Electrical machine control with operator panel (OP) Adjustable dwell times, angle ranges, and shutdown delays Variant control for different machine functions EPROM-based control Electrical supply Mains voltage: 380 V Frequency: 50 Hz EQUIPMENT Hydraulic unit OP-14 SM 8 hydraulic cylinders GHZ-50 × 225-S spec. 4 hydraulic motors OMP 50 Gear pump CPL 9 DQ Valve block with hydraulic valves Return filter Nodpozy Ndcofx Ac Aswl Fill and vent filter Oil level indicator Glycerine pressure gauge Pressure switch Electrical OP control Hydraulic and electrical circuit diagrams

Condition: used, Year of construction: 1989, machine/vehicle number: 1115.5117-25, turning diameter over cross slide: 700 mm, feed rate X-axis: 10 m/min, turning diameter over bed slide: 750 mm, controller model: Fanuc 15, distance between centers: 3,000 mm, TECHNICAL DETAILS Swinging diameter over bed: 750 mm Swinging diameter over cross slide: 700 mm Distance between centers: 3,000 mm Feed rate: 0.1 – 10,000 mm/min Rapid traverse: 10 m/min Spindle torque (max.): approx. 4,000 Nm Spindle power: approx. 65 kW Spindle nose: Size 11 according to DIN 55026 Spindle bore: 130 mm Tool holder: 6 × VDI 60 according to DIN 69880 Tailstock diameter: 130 mm Tailstock travel: 120 mm Nodez Apc Rjpfx Ac Aewl MACHINE DETAILS Control system: Fanuc 15 Power chuck: Forkardt 3 FNC 500-125 Dimensions & Weight Machine dimensions (L x W x H): approx. 8.0 × 3.5 × 2.9 m Shipping dimensions (L x W x H): 8.0 × 2.3 × 2.9 m Machine weight: approx. 28,000 kg

Condition: excellent (used), Huber Unichiller 020Tw-H Recirculating Chiller / Thermostat Manufacturer: Peter Huber Kältemaschinenbau Model: Unichiller 020Tw-H Type: UC020Tw-H Nwsdpfx Aozukkgoc Aol Temperature range: -20 to +100 °C Device type: Water-cooled recirculating chiller / thermostat For sale is a used Huber Unichiller 020Tw-H with Pilot ONE touchscreen control. The thermostat is designed for externally closed temperature control circuits and is suitable for precise cooling and temperature control of machines, industrial plants, test benches, laboratory applications, and process circuits. Technical data: Temperature range: -20 to +100 °C Temperature control / display: 5.7" color touchscreen Controller: Huber Pilot ONE Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Temperature stability at -10 °C: 0.2 K Heating capacity: 2 kW Cooling capacity at +15 °C: 2 kW Cooling capacity at 0 °C: 2 kW Cooling capacity at -10 °C: 1.5 kW Cooling capacity at -20 °C: 0.8 kW Circulation pump: Type B Max. flow rate: 25 l/min Max. delivery pressure: 3 bar Flow rate at 0.33 bar: 22 l/min Flow rate at 0.5 bar: 20 l/min Flow rate at 1.0 bar: 17 l/min Flow rate at 2.0 bar: 10 l/min Flow rate at 3.0 bar: 5 l/min Pump connection: G3/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Min. filling volume: 2.5 l Expansion volume: 4 l Refrigeration unit: water-cooled Refrigerant according to nameplate: R507 Refrigerant quantity according to nameplate: 0.57 kg Max. operating pressure according to nameplate: 25 bar Power connection: 230 V / 1~ / 50 Hz Max. current consumption according to nameplate: 15.5 A Protection class: IP20 Sound pressure level: approx. 60 dB(A) Dimensions: Width: approx. 400 mm Depth: approx. 440 mm Height: approx. 1230 mm Weight: approx. 141 kg Equipment: Huber Pilot ONE 5.7" color touchscreen Water-cooled refrigeration unit Stainless steel circulation pump Atmospherically open expansion tank Digital level indicator Adjustable over-temperature protection according to DIN 12876 USB interface Ethernet interface RS232 interface Connection for external Pt100 sensor Main switch Mobile stainless steel housing Accessories according to pictures Shipping data: Machine weight: approx. 141 kg Machine dimensions: approx. 400 × 440 × 1230 mm (W × D × H) Shipping by freight forwarder possible. Condition: Used Optical condition according to pictures Scope of delivery: 1 × Huber Unichiller 020Tw-H recirculating chiller / thermostat Accessories according to pictures The unit is available for immediate delivery. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: excellent (used), RETSCH ZM 200 Ultra Centrifugal Mill with DR 100 Feeder Manufacturer: RETSCH GmbH Type: ZM 200 Machine Type: Ultra Centrifugal Mill / Fine Grinding Mill Accessories: RETSCH DR 100 Feeder For sale is a used RETSCH ZM 200 Ultra Centrifugal Mill with RETSCH DR 100 Feeder and extensive accessories. The ZM 200 is designed for the fine grinding of sample material and is offered together with the DR 100 feeder shown in the images, various sieves, rotors, collection and feed components, and other accessories. Technical data: Manufacturer: RETSCH GmbH Model: ZM 200 Device type: Ultra Centrifugal Mill Power supply: 1~ 200–240 V / 50–60 Hz Power according to nameplate: 1,100 W Current consumption: 12 A Operation: digital control and display panel Interfaces: RS232 / RS485 Connection for DR 100 feeder CE marking Feeder: Manufacturer: RETSCH GmbH Type: DR 100 Device type: Feeder / Vibration Feeder Digital control and display panel Start/Stop operation Feed hopper and feed chute as shown in the images Dimensions: ZM 200 (L × W × H): 515 × 410 × 365 mm Equipment: Nwjdpfxjzxqhyo Ac Ael RETSCH DR 100 Feeder Feed hopper Feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container Filling and collection components Filter bag Various RETSCH spare parts and accessories Operating manual ZM 200 Operating manual DR 100 Other accessories as shown in the images Transport data: Dimensions ZM 200 (L × W × H): 515 × 410 × 365 mm Weight: not specified / not determined Transport or shipping possible by arrangement Condition: Used Device shown in operational state. Display and control panel shown in active state. Optical condition as shown in the images. Signs of wear and tear are present. Scope of delivery: 1 × RETSCH ZM 200 Ultra Centrifugal Mill 1 × RETSCH DR 100 Feeder Feed hopper and feed chute Rotor / grinding tool as shown in the images Various ring sieves / sieve inserts Collection container and filling components Filter bag Operating manual ZM 200 Operating manual DR 100 Extensive accessories as shown in the images Availability: by arrangement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: FANUC, controller model: i Series + Easy Operation Package, total height: 2,950 mm, total length: 2,160 mm, total width: 2,615 mm, table width: 450 mm, table length: 1,000 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (min.): 0 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,025 h, coolant supply: 20 bar, spindle motor power: 18,500 W, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, We acquired this machine in working condition directly from the first owner, after it had completed its production cycle. The Doosan DNM 4500 from 2016, equipped with a FANUC control system, is a reliable 3-axis vertical CNC machining center. It is particularly suitable for general milling operations, working with steel/stainless steel/aluminum, and for series production. The machine will be fitted with 2 new original windows (currently on order)! Nwsdezzdh Eepfx Ac Ael Additional options & accessories: - Internal cooling (20 bar) - Electronic handwheel - DOOSAN Easy Operation Package - Chip conveyor - HAIMER 3D probe - AOF mist extraction system - Oil skimmer - Preparation for a 4th axis - All original documentation.

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 1011/33, High-quality pharmaceutical laboratory centrifuge HEINKEL V 500 TP – complete system including control unit and accessories For sale is a professional, vertical pilot plant centrifuge, type HEINKEL V 500 TP, in excellent, like-new condition. The system is specifically designed for feasibility studies, product development, and small-scale production in the pharmaceutical and fine chemical industries and meets the highest cGMP standards. This is a complete system ready for immediate use, including the original control cabinet and integrated operating unit (HMI). Thanks to the mobile stainless steel frame (“Plug and Use”), the system can be moved flexibly around the room or integrated into existing processes. Technical data & highlights: Manufacturer: HEINKEL Drying and Separation Group Model: V 500 TP (Vertical Centrifuge) Year of construction: 2021 / 2022 Drum diameter: 500 mm Nominal volume / filling weight: 30 liters / approx. 36–38 kg Material: High-quality stainless steel (product-contact parts with high surface quality, Ra < 0.8 µm) [If applicable, add "Alloy C22 / Hastelloy" here] Nsdpfx Acsz Euz Is Ajwl Approval: CE marking present Documentation: Complete technical documentation Scope of delivery: HEINKEL V 500 TP centrifuge on a mobile stainless steel frame Original, free-standing control cabinet (including cooling unit) Integrated operating panel (touch-HMI) directly on the machine Original HEINKEL accessories and tool kit