Used Continuous Flow Pasteurizer for sale (9,242)

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PSP-26001, pressure: 0.4 bar, total width: 500 mm, total length: 500 mm, total height: 1,950 mm, overall weight: 75 kg, warranty duration: 3 months, manhole location: bottom, empty load weight: 50 kg, input voltage: 230 V, machine base height: 250 mm, type of input current: AC, volume flow: 0.15 m³/h, Equipment: documentation/manual, type plate available, Continuous-flow pasteurizer (throughput volumes depend on operating time, hygiene, and precision): • Performance and investment suitable for small on-farm dairies as well as local processing workshops: 700 liters in 6 hours. Lodszg Dlbjpfx Akwjah • Base of 50x50cm, 200cm high. Removable side guards. • Gravity-fed milk flow: provides stable flow and smooth regulation. The milk or juice is fed or pumped into an intermediate container at a height of 4 meters and flows from there to the bottling station. • A pump supplies this container at the elevated height. It also ensures effective cleaning through intense detergent circulation. • Manual control by the operator at the bottling station with alarms for "too fast" filling (incomplete pasteurization) or "too slow" filling (product overheated): the operator can then slow down or speed up the bottling process. • No contact with air: Hygienic and precise processing! • Only 2.2 kW of electricity to pasteurize more than 120 liters per hour (700 liters per day). Automatic control of the water bath temperature with a setpoint between 70 and 92°C (from thermization at 65°C to "cooking" for yogurt at 85°C). • The basic pasteurizer consists of: 1. a heat exchanger between the incoming (cold) milk (or juice) and the pasteurized milk (or juice) (72°C), 2. a heating tank (2.2kW, temperature adjustable to 5°C above the pasteurization setpoint) in which a coil is immersed, through which the liquid exiting the heat exchanger circulates, 3. a well-insulated holding tube where the milk/juice is kept for 15 seconds at the pasteurization temperature, 4. a temperature controller to illuminate a light if the liquid is too cold and another if the liquid is too hot, 5. a tube leading to the elevated inlet container, tubes connecting all components, one or two tubes with a Mohr clamp for manual filling of bottles (optional bottling unit) or jars (one at a time), 6. a drain valve at the lowest point (after pasteurization and holding, and before returning to the heat exchanger): allows the circuit to be emptied down to the last drop of pasteurized product. 2. Transfer pump with controls: • Prevents the need to transport milk or juice by pumping it from where it is located (tank on a trailer, refrigerated tank, receiving tank, container, etc.) to the inlet tank of the pasteurizer on the upper floor. • Automatic pause when the inlet tank of the pasteurizer is full (conductivity probes). Automatic restart when the level drops. • Performance between 8 and 25 liters per minute (depending on the height difference). • Also ensures powerful cleaning of the entire pasteurization circuit. • Food-grade design and materials. • Electrical consumption of 400 W. • Option: 200µm basket filter for wort, juices, and herbal extracts with moderate alcohol content. 3. Option: "Manual gravity-fed bottling unit with automatic stop, 180 liters per hour": twice the throughput with less work!

Condition: used, machine/vehicle number: LC610, Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for actuation and controlDischarge control: electronic management on crusher/pump groupManufacturer: Vitone engineeringAdvanced Automation & Control SystemsThe line leverages pneumatic actuation for reliable, low-maintenance operation and features electronic discharge management on the crusher and gear pump group for precise process control. Variable speed on the crusher enables optimal paste preparation across different olive varieties and crop conditions. Modular sections facilitate line balancing and fine adjustments during peak harvest periods.Electronic discharge management for consistent flowVariable-speed crushing for paste optimizationPneumatic controls for actuators and key mechanismsModular sections to match upstream reception and downstream filtrationProduction Line Integration CapabilitiesDesigned for seamless integration within an olive oil extraction plant, the system connects upstream fruit handling with malaxing, separation, and finishing. Downstream, it interfaces effectively with used bottling line equipment and industrial packaging solutions for edible oil, enabling a smooth transition from extraction to filling, capping, and labeling where required.Inline operation across crushing, malaxing, centrifugation, and filtrationEasy tie-in to downstream oil bottling and labeling systemsCapacity scalable by upgrading pump sectionsSorter with belts and hoppers supports steady, uniform feedMachine Condition & Maintenance HistoryThe plant is kept in regular working order with scheduled annual maintenance. It operates every harvest season, ensuring components remain exercised and service-ready. The consistent upkeep reflects a practical, second hand asset that remains fully functional and dependable for ongoing production.Operational status: in production during harvest seasonsMaintenance: routine annual service performedCondition: ready to support continuous-cycle extractionOperational Performance & Versatility Lodpe Adt D Esfx Akwjah

Condition: used, Hinst Continuous Cleaning System, Parts Cleaning System, 3.80 x 4.30 x 3.80m Continuous washing systems from the manufacturer Hinst are designed to process large quantities of series parts while meeting the highest cleanliness requirements. Ledpfxjg Ipp Aj Akwsah 1. Loading and Transport The parts to be cleaned are placed either directly or in special grid baskets (the system has matching baskets in the size 48.5 x 48.5 cm) on a transport system. Via an integrated roller conveyor or a modular belt conveyor, the parts are automatically fed into the cleaning tunnel. 2. The Cleaning Process in the Tunnel As the parts pass through the system, they go through various separate treatment zones in sequence: - Washing & Degreasing: The components are sprayed all around with a hot cleaning solution (consisting of water and special industrial cleaners) using an intensive nozzle system (spray bar) to remove oils, greases, and chips. - Rinsing: In the next zone, the cleaner residues are rinsed off with clear water. - Drying: At the end of the tunnel, a hot air blower or a blowing zone ensures that the parts emerge completely dry and clean at the other end of the machine. 3. Circulation System in the Base Large liquid tanks and pumps are located below the transport level. The wastewater flowing down is cleaned via filter systems (to collect chips and dirt) and oil separators and then pumped directly back into the cycle to conserve resources. This tunnel design (the system measures a proud 3.80 x 4.30 x 3.80 meters when assembled) guarantees a strict separation between the "dirty side" (inlet) and the "clean side" (outlet), which enables a fast cycle time in seconds directly in a production line. System No. 04.333 Year of manufacture: 12/2004 Dimensions approx. W x D x H: 3.80 x 4.30 x 3.80 m including: - 6 baskets: basket dimensions: 48.5 x 48.5 x H26 cm - roller conveyor 2.10 x 52 x 90 cm The continuous cleaning system has already been professionally disassembled and stored, with a value of €3,500. This is included in the purchase price. You can find more items - new and used - in our shop! International shipping costs on request!

Year of construction: 2023, condition: ready for operation (used), A Kohnle conveyor belt oven is available. Heating length: 1000mm, max. operating temperature: 1120°C, cooling length: 1850mm, throughput speed: 100mm-1000mm/min, channel height: 40mm, conveyor belt width: 110mm, machine dimensions X/Y/Z: approx. 5000mm/650mm/1350mm, control: Simatic HMI. Including ammonia splitter, data logger, nitrogen curtain at the front and rear and an additional pot conveyor. Documentation available. On-site inspection is possible. Expected to be available from March 2025. Lasdpsvuafkjfx Akwjh

Condition: used, Year of construction: 2016, controller model: , _____ Description: Year of manuf. : 2016 Base axis (X) : mm Outrigger (Y) : mm Technical Specifications Working area X/Y:4,000 × 2,000 mm Material support area X/Y:approx. 4,100 × 2,100 mm Z-axis travel:approx. 150 mm Max. traverse speed:12,700 mm/min Max. contour cutting speed:7,620 mm/min X/Y positioning accuracy:± 0.04 mm/m X/Y repeatability:± 0.05 mm High-Pressure Pump Manufacturer / Model:Flow HyPlex Prime 30 Motor power:22 kW (30 HP) Max. design pressure:4,150 bar Continuous operating pressure:3,800 bar Lsdpfx Aoz S S Efjkwoah Max. flow rate:3.1 l/min Power supply:400 V / 50 Hz / 3-phase Standard Equipment :-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement :-PASER 4 abrasive cutting system :-Abrasive storage hopper, capacity approx. 285 kg :-Premium stainless steel catcher tank with water level control :-CleanCut material support system :-Flow Shields splash protection :-Safety light curtain :-FlowMaster PC control system Additional Equipment :-Flow UltraPierce piercing assistance system :-DynaBeam laser height sensor :-LaserPointer :-Pure water conversion kit

Condition: good (used), Year of construction: 2011, Fuji Flow Wrapper High speed horizontal form- fill - seal machine Type: FW3410/B Lasdpjv T D D Usfx Akweh Year of construction: 2011 Zodiac HC terminal printer 200 V, 3 Ph, 50/60 Hz, 30 A Belt width: 250 mm, seal length: 300 mm Dimensions: 3360 mm x 1200 mm x 1900 mm.

Year of construction: 2026, condition: new, Continuous pasteurizer electric with preheating of the juice in the coaxial tube heat exchanger They use available low-cost energy (e.g. from solar, heat pump, biogas, tec.) although the temperature level is not sufficient for pasteurization. The rest of the temperature increase to pasteurization level is done electrically (with less energy requirement). The components: Preheating: * Coaxial tubular heat exchanger (KRWT) with thermal insulation (max. 60kW) thermal * Mixing unit incl. circulation pump ensures a stable inlet temperature of the heating water Continuous pasteurizer electric: * Electric heater 13.5 / 18 / 27 / 31.5 kW - 400 V * Tank (stainless steel) 150 ltr. with thermal insulation with stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump Pasteurizer mounted on chassis Ljdpfx Akouadm Dowoah Simple operation Total capacity up to 1100 liters per hour ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Lajdpfxst Uzitj Akwsh Proven technology - more than 500 units in customer use

Condition: as good as new (ex-display), Year of construction: 2023, Briefly stated: Base axis (X): 1.3-2 mm Outrigger (Y): 1.3-4 mm Accuracy: 0.06 mm Technical data Linear axis accuracy: ± 0.1 mm/m Maximum travel speed: 10 m/min Acceleration: 0.02 g Repeatability: ± 0.06 mm Circular accuracy: ± 0.1 mm Z-axis stroke: 180 mm Base axis (X): 1.3 m, 3 m, 4 m Outrigger (Y): 1.3 m, 2 m Equipment and accessories Maintenance packages UltraPierce1 drilling guide Splash guard1 FlowTexturing (FTT) Abrasive slurry system ecoFlow FlowNest* FlowXpert* Laser pointer Clamping and tensioning system Deionized water conversion kit * Required for FlowTexturing Ljdpfxjhw Nfqs Akweah

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge Ledpfx Akjxwtu Toweah 7x2 meters Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Lsdpfx Akjywzhkjwoah Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: good (used), Record Scorpion E Flow Wrapper Year: 2001 Packages up to 80 products per minute, depending on product. Reel dimensions: 520mm Laedpfx Akjwd Sh Uewsh Jaws: 250mm x 150mm Up to 30 programmable products Price € 5,950

Condition: good (used), Horizontal PFM flow rapper is specifically designed to meet any need of flexible packaging for food and non-food applications. This is an ex bakery machine, in good working condition Price € 5,900 Lasdpjy D Uzqofx Akweh

Condition: used, Year of construction: 2018, operating hours: 18,939 h, machine/vehicle number: PST41, Used HRS tubular skid-mounted pasteurizer cold-fill 3000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems pasteurizer is a stainless-steel packaged process skid designed for controlled thermal treatment within beverage production and industrial packaging operations. Pasteurizers are used to apply a defined heating and cooling process that supports product stability and consistent processing before downstream filling, labeling, capping, or secondary packaging.Manufacturer: HRS Process SystemsModel: 1 x 20 M170 - 63/100 8000Configuration: SKID - 1Year: 2018Operating hours: 18,939Construction: Stainless-steel process skid assemblyAdvanced Automation & Control SystemsThe machine is supplied as a process skid, providing a compact arrangement for thermal processing equipment and associated process connections. A pasteurizer installation is typically integrated with the line control architecture to coordinate product flow, heating, holding and cooling stages with upstream and downstream equipment.Control, electrical supply and instrumentation arrangements should be evaluated during commissioning according to the requirements of the receiving production line.Production Line Integration CapabilitiesThis pasteurizer can be positioned within a used bottling line or beverage production process where controlled heat treatment is required before packaging. Depending on the product and process design, pasteurization equipment is commonly integrated with product preparation, buffer tanks, filling machinery and conveying systems.The skid configuration supports organized installation within industrial packaging environments and can be assessed for connection to existing process piping, utilities and production line automation. It is suitable for applications involving liquid products where pasteurization forms part of the required production process.Machine Condition & Maintenance HistoryManufactured in 2018, this second hand pasteurizer has recorded 18,939 run working hours. The available operating-hour record provides a useful reference for maintenance planning, inspection and integration into a bottling equipment project.A pre-installation technical inspection can focus on the condition of process connections, heat-transfer components, valves, pumps, instrumentation and skid-mounted assemblies, together with confirmation of suitability for the intended product and operating process.Operational Performance & VersatilityPasteurization is an important processing step for many beverage production applications, helping operators manage thermal treatment before products move to filling and industrial packaging stages. The stainless-steel skid arrangement is appropriate for hygienic process environments and supports structured access to the installed equipment.When incorporated into a production line, a pasteurizer can contribute to stable process conditions and repeatable thermal handling. Final operating parameters depend on the product recipe, target process, line configuration and validation requirements.Installation Requirements & Site PreparationInst... Ljdpfj Adtrvsx Akwoah

Condition: used, Year of construction: 2018, operating hours: 18,682 h, machine/vehicle number: PST43, Used HRS juice line pasteurizer hot-fill - 5000 LPH - Year 2018Technical Specifications & Performance DataThis HRS Process Systems Ltd. hot fill juice pasteurizer is designed for continuous thermal treatment within beverage production and industrial packaging operations. It is intended to pasteurize juice before or during hot filling, supporting controlled product heating and thermal process consistency in a used bottling line.Manufacturer: HRS Process Systems Ltd.Machine type: Hot fill juice pasteurizerCapacity: 5000 LPHYear: 2018Process configuration: 1x12-MI120 - 89/16 - 6000 - 316L / 316L SMLSProcess configuration: 1x1-K44(2P) - 168/16 - 1200 - 304 / 316L ERWElectrical supply: 420 V, 50 HzAdvanced Automation & Control SystemsThe pasteurizer is equipped with an ADVANCE TC-20 / TC-20A temperature control interface. The controller supports set-point adjustment, high- and low-temperature alarm limits, differential control, probe calibration, relay restart delay, alarm relay timing and keypad locking. Digital input functions include door-open monitoring and selectable automatic or manual alarm reset logic.Controller functions also include probe-failure relay logic and password-protected programming parameters. A timed restart caution label is fitted, indicating that the unit may switch on after a time delay.Production Line Integration CapabilitiesThis juice pasteurizer can be integrated into a hot-fill beverage production line as a thermal processing stage upstream of filling equipment. In a typical industrial packaging configuration, product is thermally treated before transfer to a suitable hot-fill system, with downstream handling, labeling and secondary packaging arranged according to the final container format.The 5000 LPH capacity makes the equipment relevant for beverage production environments requiring continuous juice pasteurization. Final integration should consider product piping, hygienic connections, buffer capacity, filling-line throughput and thermal process coordination.Machine Condition & Maintenance HistoryThe machine records 18,682 running working hours. It is a 2018 unit with identified HRS Process Systems Ltd. process assemblies and an ADVANCE temperature controller. Inspection of heat-transfer surfaces, seals, pumps, instrumentation, temperature probes, electrical circuits and control parameters is recommended as part of commissioning planning for second hand bottling equipment.Operational Performance & VersatilityDesigned specifically for juice processing, this hot fill pasteurizer supports the controlled heating stage needed in hot-fill beverage production. Thermal treatment equipment of this type is used to help maintain a stable pasteurization process before product transfer to the filling area.The listed construction materials include 316L / 316L SMLS and 304 / 316L ERW configurations, supporting use in hygienic product-processing environments. Temperature control, alarm limits and probe-related functions provide operational tools for monitoring the pasteurization process.Installation Requirements & Site Preparation... Ledpfx Ake Adtqlewoah

Condition: used, Year of construction: 2020, machine/vehicle number: PST42, Used HRS pasteurizer cold-fill 8000 LPH - Year 2020Technical Specifications & Performance DataThis HRS cold fill pasteurizer unit is designed for thermal treatment within beverage production and industrial packaging processes. Built for cold-fill applications, it provides a controlled pasteurization stage before or during integration with a used bottling line. The unit has a stated processing capacity of 8000 LPH and was manufactured in 2020.Manufacturer: HRSEquipment: Cold Fill Pasteurizer Unit IICapacity: 8000 LPHYear: 2020Electrical supply: 420V / 50HzConfiguration: 1X8 - MI120 - 8916 - 8000 - 316/316Additional configuration lines: 1X12 - MI120 - 8916 - 8000 - 316/316; 1X1 - K50 (2P) - 219/16 - 750 - 304/316Construction materials indicated: 316/316 and 304/316 stainless steel gradesAdvanced Automation & Control SystemsThe pasteurizer is configured for a 420V, 50Hz electrical supply. In a beverage production environment, a pasteurization unit is typically connected to line controls and process instrumentation to maintain stable thermal treatment parameters and coordinate product flow with upstream and downstream bottling equipment.Control, monitoring and interlocking arrangements should be assessed during installation planning in relation to the intended production line layout and operating procedures.Production Line Integration CapabilitiesA cold fill pasteurizer is a process-stage machine suited to integration with industrial packaging and bottling equipment. It can support product preparation and thermal processing ahead of filling, or be incorporated into a wider beverage production system according to the required process flow.Its 8000 LPH capacity provides a clear basis for matching the unit with compatible filling, conveying, storage and downstream packaging machinery. Integration should consider product transfer piping, hygienic connections, buffer capacity and synchronization with the selected bottling line throughput.Machine Condition & Maintenance HistoryThe unit was manufactured in 2020. No run-hour meter is installed, and no operating-hour reading is available. The equipment includes visible stainless-steel process piping and vessel or tank components.As with any second hand pasteurization equipment, commissioning should include inspection of product-contact surfaces, seals, pumps, instrumentation, electrical connections and process circuits before production use.Operational Performance & VersatilityThis pasteurizer is intended for cold-fill thermal processing applications in beverage production. Pasteurization equipment of this type is used to support controlled treatment of liquid products while maintaining a hygienic process path through stainless-steel piping and process components.The indicated 316/316 and 304/316 material designations support its suitability for demanding hygienic process environments. Final product compatibility depends on the process recipe, required pasteurization profile and the complete line configuration.Installation Requirements & Site Preparation Lodpfx Ae Adtq Eekwjah

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 Waterjet Cutting System for Sale For sale is a very well-maintained Flow Mach 200 waterjet cutting system, manufactured in 2021, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single and small series production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar Ledpoy Urzisfx Akwjah – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist – Laser edge finder – ecoFlow abrasive manual desliming system – EKOWA cutting water treatment – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Ready for immediate use Asking price: €105,000 net Inspection possible by appointment. Further pictures and information are available upon request.

Year of construction: 2006, condition: ready for operation (used), A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible. Lsdezka Imopfx Akwjah

Year of construction: 2002, condition: ready for operation (used), Ilapak Delta 3000 Stainless Steel Flow Wrapper With gas flush facility In current daily use Ready for removal Sealing bar is 250mm wide See video attached Price € 7,500 Lajdpsy Rvfqjfx Akweh We can organise shipping / delivery for you.

Condition: good (used), OK Supersealer Continuous Bag Sealer Fully stainless steel Complete with stainless steel belt conveyor Adjustable temperature control Ljdpfx Akjzbnnksweah Stop start controls, E stop Height adjustable sealing head Mobile on castors and lockable feet The best bag sealer on the market Price € 9,500

Condition: used, Year of construction: 2014, machine/vehicle number: PST39, Used Tetra Pak dual-mode pasteurizer, 10 ton - Year 2014Technical Specifications & Performance DataThe Tetra Therm Lacta pasteurizer is designed for continuous thermal treatment in dairy processing and beverage production. This industrial pasteurization system is configured for yogurt and pure milk applications, supporting controlled heat treatment before subsequent processing, filling, or packaging operations.Model: Tetra Therm LactaYear: 2014Production capacity: 10 tonnes/hHolding time: 285 seconds for yogurt pasteurizationPlate heat exchanger: Tetra PlexHeat exchanger design pressure: 10 BAR on both circuitsHeat exchanger design temperature: 150 °C on both circuitsHeat exchanger test pressure: 13 BAR on both circuitsAdvanced Automation & Control SystemsThe pasteurizer is built around a continuous thermal process in which product flow, heating and holding stages must operate in coordinated sequence. The 285-second holding tube provides the retention stage required for yogurt pasteurization, helping maintain consistent process exposure before the product continues through the line. Control and monitoring arrangements should be integrated with the plant process system to supervise temperature, pressure, flow and product-routing conditions.Production Line Integration CapabilitiesThis pasteurization equipment can be integrated into a dairy processing or industrial packaging line upstream of filling equipment. It is suitable for handling yogurt and pure milk within a process layout that includes product reception, preparation, heat treatment, hygienic transfer and downstream packaging. The plate heat exchanger supports efficient thermal exchange in continuous processing, while the holding section provides a dedicated pasteurization stage for yogurt production.In a used bottling line or second hand dairy production installation, equipment of this type is typically connected to hygienic product piping, process utilities and downstream buffer, filling or packaging machinery. Integration planning should consider product viscosity, cleaning procedures, piping configuration and synchronization with the selected beverage production or food-processing line.Machine Condition & Maintenance HistoryThe main Tetra Therm Lacta machine was originally released from the factory in 2014. The Tetra Plex plate heat exchanger is described as original equipment for the machine. The associated heat-exchanger data plate identifies manufacture for Tetra Pak and service by Tetra Pak, with a 2012 year shown on the plate.Operational Performance & VersatilityDesigned for dairy thermal processing, this pasteurizer supports yogurt pasteurization through its dedicated 285-second holding tube and can also be used for pure milk pasteurization through the integrated plate heat-exchange section. Continuous pasteurization systems are an important part of hygienic beverage production and industrial packaging operations where stable thermal treatment is required before filling or further processing.The Tetra Plex plate heat exchanger is engineered for product heating and coolin... Ledpfoz Ecmxox Akweah

Condition: used, Year of construction: 2016, machine/vehicle number: PST34, Used BUCHER tube-in-tube flash pasteurizer 12000 L/hTechnical Specifications & Performance DataThis tube-in-tube flash pasteurizer delivers reliable thermal treatment for high-quality beverage production. Manufactured by Bucher Unipektin, model PWAP 12000-S, the unit is designed for continuous, hygienic operation with minimal product degradation. Its robust stainless steel construction and compact skid-mounted layout simplify installation and integration into existing processing or used bottling line environments.Manufacturer: Bucher UnipektinModel: PWAP 12000-SMachine type: Tube-in-tube flash pasteurizerYear: 2016Capacity: 10,000–12,000 l/hHeat exchanger: Tube-in-tube designConstruction: Stainless steel, skid-mounted frameControl: Touchscreen HMI control panelIncluded components: Product feed pump, holding tubeSanitation: CIP-ready configurationPrevious product history: Apple juice / concentrate (non-dairy)Documentation: Full documentation and user manual includedAdvanced Automation & Control SystemsThe integrated touchscreen HMI provides intuitive operation, real-time process visualization, and streamlined recipe management for consistent pasteurization results. Automated control of temperature, product flow, and holding time supports stable performance and product safety. Alarm handling, trend logging, and guided operator prompts help ensure repeatable processes with minimal downtime. The system’s CIP-ready design allows automated cleaning sequences to be managed from the control interface for efficient changeovers and hygiene assurance.Production Line Integration CapabilitiesEngineered for seamless integration in beverage production environments, this flash pasteurizer connects upstream to blending, filtration, and storage tanks, and downstream to fillers and industrial packaging systems. The skid-mounted footprint simplifies placement and utilities hook-up, enabling fast commissioning within second hand or upgraded processing setups. Its continuous operation supports steady flows into downstream filling and labeling equipment, helping maintain overall line efficiency.Machine Condition & Maintenance HistoryThe unit has a documented non-dairy product history processing apple juice and concentrate, contributing to a clean internal condition profile. Supplied with full documentation and user manual to facilitate installation, operation, and maintenance. Presented as a second hand pasteurization system suitable for beverage production environments seeking dependable thermal treatment with compact installation.Operational Performance & VersatilityThe tube-in-tube configuration is well-suited for juices, concentrates, and similar non-dairy beverages where gentle handling and stable heat transfer are critical. The design supports rapid heat-up and controlled holding for effective microbial inactivation while preserving product quality attributes. The CIP-ready construction, sanitary connections, and stainless steel surfaces... Ledjz E Dhqepfx Akweah

Condition: excellent (used), BOEMA 300 L CONTINUOUS HORIZONTAL MIXER – STAINLESS STEEL BOEMA 300-liter continuous horizontal industrial mixer, designed to perform mixing, homogenization, and ingredient incorporation processes in food products within continuous production lines. The equipment features a horizontal mixing chamber, a top feeding hopper, and a motorized mechanical agitation system, which allows for the combination of different components and the production of a uniform mixture before further processing. Its construction, primarily in stainless steel, facilitates its integration into food industry facilities, especially in lines for preparing products with different textures and consistencies. MAIN FEATURES - Manufacturer: BOEMA - Type: Continuous horizontal industrial mixer - Rated capacity: 300 liters - Construction: Stainless steel - Horizontal mixing chamber - Continuous operation - Top feeding hopper - Internal mechanical agitation system - Mixing and homogenization of ingredients - Controlled product feed - Electric motor-reducer drive - Mechanical transmission system - Continuous product discharge - Connections for ingredient feeding - Chamber with access and inspection covers - Industrial structure on adjustable supports - Design for integration into automatic lines - Accessibility for cleaning and maintenance OPERATING PROCESS The ingredients are introduced into the BOEMA 300-liter mixer through the top hopper and the available feeding connections. Inside the horizontal chamber, the agitation system performs the necessary movement to distribute the components and obtain a homogeneous mixture. The product advances through the chamber while the mixing process takes place, allowing for continuous feeding and discharge. Once processed, the product is conveyed to the next stages of production. It can be integrated with feeding pumps, preparation tanks, cookers, heat exchangers, dosing systems, and filling lines. APPLICATIONS Especially suitable for canning industries, manufacturers of prepared foods, sauces, and food products with solid and liquid components. Depending on the installed configuration, it can be used for: - Sauces and prepared foods - Vegetable mixtures - Products with chunks and covering liquid - Preparations for canned goods - Mixtures of solid and liquid ingredients - Semi-liquid products - Prepared foods - Other formulations compatible with continuous mixing Lasdpfsz R Tqhox Akwsh The BOEMA 300-liter horizontal mixer allows for the automation of ingredient incorporation and homogenization, maintaining a continuous flow of product to the next industrial operations. The usable capacity, agitation speed, production rate, and characteristics of the mixing system should be confirmed according to the installed configuration. Machine available for inspection. Additional technical information, production capacity, formats, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, OK Supersealer Continuous Bag Sealer Stainless steel Adjustable height Lodpfx Aszcff Askweah Adjustable temperature control for different gauge bags Mobile on castors Bag infeed from right to left The best bag sealer on the market Price € 4,950

Condition: used, OK Continuous Bag Sealer Lajdpjzcg R Tjfx Akwsh Stainless steel Adjustable temperature control for different bag gauges / micron Adjustable height mast Mobile on castors Price € 4,950