Used Complete Sawmill (Mobile) for sale (17,614)

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hnsdpfxezagkze Ah Ron Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Hnjdpeypat Isfx Ah Ren Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: like new (used), For sale is a used Logosol F2 sawmill with a cutting length of 3.8 m. The demonstration machine is in its original condition, so you have full warranty. Technical data: - Log diameter: 60 cm – optionally more - Log length: 3.8 m – extendable - Total length: 4 m - 2 leg stands with height adjustment - 4 guide rails with connectors Hsdoyid D Ijpfx Ah Rjnn - 2 log holders The sawmill is located at A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, sawmill, Logosol Reference: R-A0117

Condition: reconditioned (used), Year of construction: 1996, Saw unit, manufacturer Linck, type KCS 6 Hnodpfx Aezdiulsh Ron Base frame with 4 saw spindle units Double spindle design with 6 adjustable saw heads Cutting height 325 mm, weight 12,400 kg The machine is currently being overhauled in our factory.

Condition: excellent (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, HR700, 3-log handling table, 6 cross conveyors, log loading system, and more. The sawmill line is fully functional. Customer service has been recently updated. The line is still in operation and can be inspected at any time. The price includes approximately 100 saw blades (value approx. €3000) for LT70/HR700 and 11 saw blades for EG800 (value approx. €1400). Currently, the HR700 is not in use and is stored. The HR700 is fully functional and has only 30 operating hours. An alternative configuration of the line with the HR700 can be seen in the last picture. If interested, the sawmill line can also be sold with ongoing operations (approx. 500-1000 m3 of sawn timber/year). If you have any questions, please do not hesitate to contact me. Hnjdpfx Ajyz Ia Ieh Rsn

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Hodpfxsyr I Dmo Ah Ronn

Condition: used, Year of construction: 2016, functionality: fully functional, cutting length (max.): 8,000 mm, wheel diameter: 1,000 mm, Horizontal Band Saw WRAVOR WRC 1000 Proffesional industrial saw with 30 kW motor — for cutting logs up to diameter Ø 950 mm Year of manufacture: 2016 Technical Specifications: • Main motor: 30 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-130 PLC Hnedpfszd A Ivsx Ah Rsn • Manual adjustment of cutting thickness possible • Track length: 12 m • Hydraulic log clamps: 4 X • Hydraulic lifting / mechanical rollers: 2 X • Hydraulic angles (90°): 3 X • Standard log turner: 2 X • Outfeed silon conveyor belt for board transport

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Complete sawmill for pallet lumber production, consisting of: Individual sale of machine packages is also possible. 1. Log yard Häwa, with root reducer and Valon Kone debarker VK 90. Calibrated factory inlet measurement system, manufacturer Jörg. Sorting with 28 bins. Log length 2.0 - 5.0 m. Log diameter 20 - 90 cm. 2. Sawmill: Möhringer band saw, running band saw with Flexi Drive carriage. Splinter detection device. Log feeding with stepped singulation. Laser measurement system Bidac. Kallfass model trimming. Resawing: EWD Optimes with chipper PF 19 and double-blade saw NKU. Brodbaek edger. Stacking system for main product, empty pallet handling for main and side products. Hedpfx Ahsx T Azwj Ronn Kuka robot for packing side products and main products, four dimensions possible. Complete mechanization, electrical and electronic control cabinets, etc. Disposal. Detailed plans or a video can be sent upon request.

Condition: excellent (used), functionality: fully functional, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing hard and soft wood Condition: Technically in excellent condition Included in the price: All machinery, auxiliary equipment, spare parts, and saw blades 🔧 Main lines of the plant 1. External loading and first cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year of manufacture: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw chain type: Chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk material • 5 m long discharge roller conveyor 2. Internal wood processing • E. Gillette Europe automatic log infeed  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Roller diameter: 1600 mm  - Capacity: Logs up to 1200 mm in diameter  - Belt width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel design with divisible opening Hnsdpjwh U Dmefx Ah Rjn  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edge milling machine (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / Width: 600 mm  - Automatic infeed and roller discharge 3. Shredding and removal • Vecoplan VTH 65/25/5/U Industrial Shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 Vibrating Table  - Surface: 650 × 2500 mm  - For even feeding to the shredder • Vecoplan KKF 500-1K-U Scraper Conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, and pellets 4. Automatic Cutting and Sorting • Kallfass RA4000R Automatic Cutting System (1995)  - Max. cutting diameter: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC Multi-Blade Saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with spacers  - Max. log length: 2.5 m 5. Additional machines • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw grinder  - Saw blade diameter: 80–700 mm  - Grinding angle: -20° to +30° • Bammesberger FBA2 surface grinder  - Grinding length: 400 mm / Width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air flow: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction system • APW fan – 18.5 kW, built in 1998 (2 fans) • Lysair fans – built in 1995 and 2020 • 2 cyclones with rotary valves • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be viewed in Belgium by appointment. All equipment is ready for operation and ready for immediate use. Ideal for industrial wood processing or as a complete investment. _____

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min Hnedpoxtwwkofx Ah Rsn 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, A complete sawmill machinery package is being sold as follows. Sale as a complete package is preferred, but individual items or reservations are possible! 1. Log infeed system, 2-strand Conveyor length: 5.5m Width: 2.8m 2. Rail car/cross conveyor, driven 3-strand Length: 4.0m Width: 2.55m Track gauge: 1.85m 3. Tensioning car, Mayrhofer with auxiliary car Track gauge: 90cm 4. Circular sawmill, Möhringer Model: OSS75 Year of manufacture: 1991 Stroke: 500mm Frame length: 750mm with drive motor with saw guide with saw blades with hydraulic saw tensioner with splitting wedge, Möhringer 5. Driven circular log transfer system Length: 9m Width: 1.4m Roller width: 1.2m 6. Spiral log transfer system Length: approx. 6m Width: 1.2m with lift for boards 7. Log transfer system Length: 14m Width: 1.1m Roller width: 0.85m with spiral log transfer system Length: approx. 7m Width: 1.1m Roller width: 0.85m 8. Cross conveyor, 4-strand Conveyor length: 2.3m Width: 4.2m 9. Double edger, Paul KME2 with cut-off saw with templates with saw blades with drive motor with sawdust extractor with length sorting 10. Cut-off saw, Stihl with rail car Hnjdozb A R Hepfx Ah Rsn 11. Circular saw sharpening machine, Vollmer CABG 12. Circular saw tensioning machine, RIVO GSA 13. Circular saw sharpening machine, Vollmer CNE (2 units available) 14. Forklift, Manitou MSI 50, year of manufacture 2002 with accessories 15. Wheel loader, Manitou / Ahlmann AL85t, year of manufacture 2001 with accessories

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, cutting length (max.): 3,600 mm, cutting width (max.): 400 mm, year of last overhaul: 2024, Woodmizer SLP line and extraction system with log turner infeed fully operational video shows complete line with crosscut. £80,000 plus VAT cost over £250,000 just for the sawline. Contact me for any futher information. Hjdpfx Aoyub Ahoh Rsnn

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automated side board processing line with singulation, trimmer for cutting to length, 2 stacking machines, additional discharge, and cutting of stacking slats: Boards 2000-5000 mm long, 16 - 40 mm thick, 70 - 200 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross transfer of boards with a 4-strand chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Aligning roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-cutting, 5000 mm into stacking machine 1, alternatively: without re-cutting, 4000 mm into stacking machine 1 Hnjdpfx Ahjy Uzhfe Rjn with re-cutting, 4000 mm into stacking machine 2 with re-cutting, 3000 mm into stacking machine 2 with re-cutting, short lengths for discharge into a box with re-cutting, short lengths for discharge into a box with re-cutting, 2 or 3 x 101 cm for stacking slats with re-cutting, 2 or 3 x 101 cm for stacking slats or waste cut - cutting length 505 mm for the underlying vibration chute - 2 stacking machines: 1 x 2500 to 5000 mm and 1 x 2000 to 4000 mm - automatic lowering of the finished packages and onward transport to the automatic strapping station - FROMM strapping with 16 mm plastic band and automatic onward transport to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, with side boards of 4000/17 x 76 mm, one employee produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipping system has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without problems.

Condition: used, Year of construction: 1997, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 00000, ROUND LOG INFEED AND CUTTING LINE - Round log infeed to band saw in a two-part design - Cutting line, 4-4.5-5-5.5 meters (manually and continuously adjustable) with conveyor for sections and sawdust separator, as well as a robust sawdust screw conveyor Hnedszbtq Rjpfx Ah Rjn - Automation and control system, as well as sensors for automatic/continuous cutting - "Nigger" (likely a mis-translation or colloquial term) for positioning logs on the bogie carriage SAWING AND CONVEYING - Carriage: Primultini electric with 2 log turners, length 5.70m • Clamping block 1-2: 86cm • Clamping block 2-3: 145cm • Clamping block 3-4: 220cm - Block band saw BRENTA, roller width 130mm, with control panel for all systems - Trimming band saw BRENTA, roller width 130 - PAUL KMEL edging saw, year of manufacture 1974 Incl. roller conveyors for infeed and outfeed Incl. control system and spare parts Incl. crosscut saw for cutting the boards to length - Edging saw “old” type CORONA - Roller-chain conveyors for all saws, as shown in the photos

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Hnodpfov Ny Nxex Ah Rjn Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley 2. El. Cabinet 3. Comand pult 4. Hydraulic drive Hnodpfx Ajrx Rq Eeh Ron

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed 240-12 chipper canter Hsdswp E E Dopfx Ah Ronn Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: excellent (used), functionality: fully functional, ARI high capacity line for big logs Log deck 2 sections Hjdpfxewp E Tns Ah Rjnn Step feeder Log conveyor Debarker infeed (Remill) Debarker Cambio 90-75/6 (or a Cambio 500) 2d scanner for reject boxes Log conveyor with 2 reject boxes Log conveyor, kickers to the left Buffering deck and step feeder Log conveyor Rema 3d scanner AriVislanda LT2 auto log turner 2006 AriVislanda LI-600 log centering infeed 2006 AriVislanda RL-600 Reducer AriVislanda QSS-700 Saw 2011 AriVislanda VFW 600 L 2011 AriVislanda board separator 2006 Block tilt AriVislanda block infeed type Nils AriVislanda RC-600 Reducer Ingvar Persson turn table AriVislanda 500A Infeed AriVislanda 509-7F Multirip AriVislanda boardseparator Beltconveyor Dual Edging lines Söderhamn (1 left 1 right) 2 x 300 m/min Cross conveyors Söderhamn Elevator Söderhamn 483 Scanners Söderhamn 528 Infeed Söderhamn 5100 Edger Söderhamn 5400 Edger outfeed with reject displacement EdgeIT system

Condition: ready for operation (used), Year of construction: 2018, operating hours: 10,100 h, functionality: fully functional, type of input current: three-phase, cutting length (max.): 8,000 mm, overall weight: 19,500 kg, cutting height (max.): 800 mm, input current: 250 A, input voltage: 400 V, saw blade width: 500 mm, main saw diameter: 500 mm, Equipment: cabin, centralized greasing system, scorer, - Log circular saw, fully functional - max. log diameter 800 mm, max. length 6 m, individual pieces up to 8 m - max. timber size 180/180 mm, in wide board mode 310/180 mm - automatic timber sorting Hnjdpfxeyc Ncrj Ah Rsn - price includes log feeder, 2x outfeed conveyors, and 1x sorting conveyor

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Esterer full-frame saw, model HDS 600, year 1990. Passage width 735 mm, stroke 600 mm. Includes switch cabinets, operator control panels, and drive motor. The machine fits on the foundation of the HDS 700. Can be inspected at Scheibner GmbH, 36110 Schlitz. Hnsdpjrmmqzefx Ah Ren

Condition: excellent (used), Year of construction: 2022, Horizontal 6-Head Resaw Year of manufacture: 2022 Technical data: Motor: Electric 11 kW Cutting dimensions: Max. cutting width (cant timber): 30 cm Max. cutting height: 20 cm (18 cm with electric feed) Min. cutting height: 0.6 cm Hnodoylw Saspfx Ah Rjn Min. material length: 120 cm Feed system: Steel belt conveyor Feed speed: 0 – 20 m/s Saw band: Length: 4010 mm Width: 32 mm / 35 mm Band wheels: Diameter: 600 mm Multisetwork – Allows cutting height of each individual unit to be set via the control panel. Technical condition: very good. Technical documentation and further photos are available.

Condition: used, No. 3264 Complete sawmill Möhringer / Paul Used, still connected to power until 30.06.26 Consisting of: - Log crosscut table with driven tapered rollers Length measurement Hecht with remote-controlled photoelectric sensors - 1 cross conveyor to the frame saw, 7000 x 5500 mm LW Cam chains in mint condition - 1 cross conveyor, 3800 x 4000 mm LW - 1 roller conveyor in front of the frame saw, length 12400 mm, roller width 1400 mm With hydraulic lowering and lifting for sawn timber, cross-discharge with 2 flap gates - Quick-clamping frame carriage EWD with auxiliary carriage - 1 auxiliary conveyor for log feeding in front of the frame - Root reducer Möhringer - Frame saw Möhringer B 75-55 Multi-BV, year of construction 1994 Passage 700 mm, stroke 550 mm, saw blades hydraulically adjustable, conveyor belt, log loading device with adjustable laser, round timber measurement Hecht, clamps Jansen, hooks, 60 saw blades, adjustment gauge Hnedpfxoyzr Tfo Ah Ren - Powered splitting wedge with chain bed Möhringer 230-292, year of construction 1994 With pre-cutting, photoelectric sensors, and laser for adjustment - 1 roller conveyor 4000 x 1400 mm LW, with grooved rollers, cross-feed with pneumatic cylinders - 1 S-conveyor with storage 3500 x 4000 mm LW, flights Albert made of square tube - 1 S-conveyor 3000 x 5500 mm LW, motor with adjustable slip clutch, function monitoring, drive elements made of angle iron - 1 under-table cross-cut saw Paul 15 AO, year of construction 1992 - 1 double edger Paul KME 2 / 750 R, year of construction 1988 With splinter separator, right-hand side unit electrically adjustable, through-feed cross-cut unit, length sorting system, preselection programs Österle - 1 conveyor belt 7400 x 400 mm LW - 1 conveyor belt 4000 x 400 mm LW - 1 conveyor belt 3000 x 500 mm LW - 1 trough conveyor approx. 6500 x 500 mm LW, ascending, for sawdust - 1 trough conveyor HOLTEC approx. 6500 x 500 mm LW, ascending, for wood chips - 1 trough conveyor HOLTEC, horizontal, with left and right rotation as a distributor over the boxes - Drum chipper HAAS, feed width 600 mm, feed height 150 mm, with vibrating chute - Frame saw sharpening machine OPL - Saw blade tooth setting machine VOLLMER GSA, year of construction 1996 - Frame saw sharpening machine VOLLMER (needs minor repairs, push cylinder bent) Sale on behalf of customer, ex location near 34125 Kassel, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, Year of construction: 2000, functionality: fully functional, all sawmill equipment Hnsdpfxeydvpzj Ah Ren head saw, edger, log conveyor system, dust extraction system, saw sharpener

Condition: new, Year of construction: 2025, EG300EH25S-EMR Hjdpfx Asyynq Rjh Renn Main motor power 18.5 kW 5 circular saw blades (4 fixed and 1 movable), Setworks device for automatic setting of cutting parameters Set of two lasers Set of 5 circular saw blades Adjustable feed speed 0-25 m/min 4 driven rollers Infeed/outfeed table Roller conveyors Saw blade diameter: 350mm Min. board length: 700mm Max. board thickness: 60mm Min. board thickness: 16mm Max. board width: 550mm Max. cutting width: 420mm Min. cutting width: 20mm Chip box

Condition: refurbished (used), Year of construction: 2018, functionality: fully functional, cutting length (max.): 8,000 mm, overall weight: 13,000 kg, total length: 15,000 mm, saw band length: 9,045 mm, saw band width: 160 mm, wheel diameter: 1,250 mm, Horizontal Band Saw WRAVOR WRC 1250 AC High-performance industrial saw with 55 kW motor — for cutting logs up to diameter Ø 1250 mm Year of manufacture: 2018 General Remont: 2026 Hnjdpfoy Rmx Isx Ah Rjn Technical Specifications: • Main motor: 55 kW • Fixed command board on sawhead • Control: fixed control panel with Unitronics V-280 PLC • Manual adjustment of cutting thickness possible • Track length: 12.5 m • Hydraulic log clamps: 5 X • Hydraulic rollers: 5 X • Angles (90°): 5 X • Standard log turner: 4 X • Outfeed silon conveyor belt for board transport