Used Coining Press - Single Column - Hydr. for sale (24,574)

Condition: good (used), Year of construction: 1990, pressure ca.10 t throat anpassbar mm stroke 250 mm table surface area 220 x 220 mm mm material diameter max. ca. Ø 267 mm Lajdpfx Ajul Eawsn Usb total power requirement 1,5 kW weight of the machine ca. 430 kg dimensions of the machine ca. 899 x 772 x 1520 m

Condition: used, Year of construction: 1970, pressure 40 t stroke 150 mm serial number 100091 2 Druck & Hub verstellbar Ledpfsvxltbsx An Uoab pressure 25 t weight je 1,5 t safety light frame ja bei beiden

Condition: used, Technical details: pressure: 80 t distance between columns: 880 mm dayligth: 200 mm Table dimensions: 880x300 mm height over floor: 1000 mm distance between columns: 800 mm total power requirement: ca. 12 kW machine weight ab.: 2855 kg space requirements of the machine approx.: T:1,4xB:1,65xH:1,9 m Embossing - Hot Embossing application area: - for example: for foils, plastics, paper, hardboard materials etc. - stamp plate size: 600x310mm equipment: - counter - hydr. tank Accessories: - Mounting plate (600x300x90mm) not heatable. Sale as is. * Lajdpfx Aou Icwtjn Usb

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm Laedpfxetqqwus An Ueb table height over floor 840 mm total power requirement 4 kW weight of the machine ca. 1,3 t

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Ljdodzp Tropfx An Uoab Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ljdpfeyupulsx An Ujab Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm Lajdpfxsy Rur No An Uob dayligth 1000 mm table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l Ledpfjyx Ihysx An Ujab power requirement 18,5 kW Weight 9,0 t dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm Lsdpfxswvva Se An Usab yom 1981 - modernization 1990 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1992, pressure 6,3 t stroke 305 mm throat 250 mm dayligth 850 mm table surface area 470 x 450 mm Ledpfev Svbcsx An Ujab table height over floor 800 mm ram surface 40 mm feed down 120 mm/s feed up 510 mm/s working feed 21 mm/s oil volume 175 l power requirement 2,2 kW Weight 1,5 t dimensions of the machine ca. 1,0 x 1,55 x 2,6 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1978, pressure 100 t stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation Lasdpjvzxp Uofx An Uob

Condition: used, Year of construction: 1993, pressure 100 t throat 320 mm stroke 160 mm dayligth 480 mm table surface area 630 x 550 mm hole in the table 200 mm table height over floor 860 mm ram surface 560 x 450 mm oil volume 500 l total power requirement 30,5 kW weight of the machine ca. 6,4 t required space 1,6 x 2,0 x 2,9 m Lajdpfx Anovuufls Ueb year of manufacture 1979 - overhaul 1993 with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t Lodsvuuckepfx An Ueab required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1993, pressure 2 x 6,3 t stroke 307 mm throat 180 mm dayligth 900 mm Lasdevut Rmopfx An Usb table surface area 470 x 360 mm table height over floor 810 mm ram surface 45 mm feed down 137 mm/s feed up 33 mm/s working feed 540 mm/s oil volume 140 l power requirement 3,0 kW Weight 1,5 t dimensions of the machine ca. 1,2 x 1,2 x 2,8 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation Press has 2 Press shafts - press force 2 x 6,3 t

Condition: used, Year of construction: 2000, pressure 25 t stroke 150 mm throat 420 mm dayligth 450 mm table surface area 700 x 820 mm Laodpfevut N Njx An Ueb table height over floor 850 mm ram surface 600 x 600 mm feed down 370 mm/s feed up 370 mm/s working feed 18 - 33 mm/s oil volume 300 l power requirement 5,5 kW Weight 5,8 t dimensions of the machine ca. 1,1 x 2,0 x 2,4 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, cutting impact cushioning, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm Lasdpsvut H Isfx An Ueb power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm yom 1980 - Modernization of control (Siemens S 7) in 2004 with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t Lsdpfx Aevut Edon Uoab required space 1,6 x 2,0 x 3,7 m with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm Lodpjvzxphofx An Uoab feed down 48 mm/s feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Year of construction: 1977, condition: ready for operation (used), A hydraulic universal press is offered. Press force: 75t, stroke: 250mm, table surface X/Y: approx. 600mm/500mm, safety distance: 107mm, overrun distance: 18mm. Equipment: manually adjustable stroke limitation (top/bottom), integrated ejector with draw cushion control, analog pressure gauge up to 400bar. Safety device: SICK safety light curtain for the working area. Total weight: approx. 3500kg, overall dimensions X/Y/Z: approx. 1300mm/1800mm/2900mm. Inspection possible by arrangement. Lsdpfxey S A Nfo An Uoab

Condition: used, Year of construction: 1985, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 440 mm table surface area 330 x 270 mm table height over floor 970 mm ram surface 65 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,8 x 1,3 x 2,4 m Ledeyfwvlopfx An Usab with oil-hydraulic drive, light-guard (make Sick C 4000), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Year of construction: 1980, pressure 6,3 t stroke 250 mm throat 150 mm dayligth 450 mm Laodpfx Ansy Ig Nbj Usb table surface area 330 x 270 mm table height over floor 970 mm ram surface 240 x 100 mm oil volume 30 l power requirement 1,5 kW dimensions (WxDxH) 0,9 x 1,3 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light-guard (make Pilz), controllable dependent on pressure/time and way, upper and lower stroke limitation, mechanical depth stop, two-hand operation

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm Lodpfju Nfv Uex An Ujab ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm Lsdpfx Anou Nfvbj Usab passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg Ledpfx Aju Nfvuon Ueab dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m Laedpfx Anew D Awme Uob manual counter *