Used Chip Drying Barrel for sale (7,516)

Condition: used, machine/vehicle number: IDC000031, Chip drying barrel Length - 14 m Width - 3.6 m Drying capacity - 10t/h Psdpsrl Ra Hofx Akijrc

Year of construction: 2017, condition: good (used), functionality: fully functional, Furnace Housing Dimensions External dimensions: - approx. 3,800 x 4,300 x 2,200 mm Internal (usable) furnace dimensions: - approx. 2,440 x 1,400 x 1,200 mm Batch Load weight: - 9 boxes (net weight 50 kg/each) - approx. 250 kg material per box - stack arrangement 3x3 Performance Data - 1 gas recuperator burner - 160 kW rated heating capacity - Max. allowable chamber furnace temperature 720°C - Max. allowable post-combustion temperature 1,020°C - 1 temperature control zone Temperature Control Range - Chamber furnace 480°C – 700°C - Post-combustion 850°C – 1,000°C Supply Media - Natural gas L or H - Gas inlet pressure 80 mbar - Voltage 400 V Predpfsxcybkjx Akioc - Frequency 50 Hz - Connected load 8 kVA - Compressed air 6 bar, dry, oil-free Material: e.g. brass or bronze

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): Psdpfx Akoz I Dzioierc - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW Predpjz I Thrjfx Akijc - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Year of construction: 2021, condition: new, functionality: fully functional, For sale is a complete, new, and never-installed industrial line for drying, steaming, and heat treatment of wood, purchased in 2022. The equipment is in factory condition and is manufactured by a top-tier Chinese manufacturer (Shandong Weifang Tenglong Heavy Industry / Annan Yifeng Boiler). This complete set represents a self-contained and ready-to-use system for highly efficient processing of sawn timber in large industrial capacities. KEY CAPACITIES AND LINE COMPONENTS: Wood dryers: 4 chambers, each with a capacity of 100 m³ (total of 400 m³ per cycle). Steaming/humidifying chamber: 1 chamber with a capacity of 50 m³ (for softening, color equalization, and stress relief in the wood). Steam boiler: Industrial biomass/wood chip steam boiler (Model DZH2-1.25-T), with a capacity of 2 tons of steam per hour. Associated equipment: All necessary fans, aluminum heat exchangers, pipelines, valves, and fully automatic PLC control cabinets. DETAILED TECHNICAL SPECIFICATIONS: Wood dryers (Model ZCM-Q100 - 4 units): External chamber dimensions: 8.00m (W) x 8.60m (D) x 5.60m (H). Construction: Internal and external walls made of high-quality aluminum (0.9 mm thick), with insulation of non-flammable rock wool (80 mm thick) and a supporting structure made of stainless steel (Inox). Ventilation per chamber: 5 axial, high-temperature reversible fans (3.0 kW power per fan, airflow 30,000 m³/h). Heating: 8 groups of bimetallic radiators (special aluminum finned tubes with seamless steel core). Steaming chamber (Model ZCL-Q50 - 1 unit): Capacity: approx. 50 m³. External dimensions: 5.50m (W) x 6.50m (D) x 5.00m (H). Equipped with a direct steam injection system under pressure, with 3 high-efficiency circulation fans and a sliding insulated door system. Biomass/wood chip steam boiler (Model DZH2-1.25-T): Psdpfs Aayi Hjx Akierc Steam capacity: 2 t/h. Pressure: Working 1.25 MPa / Test 1.65 MPa. Steam temperature: 194 °C. Fuel: Wood chips, sawdust, biomass, pellets. Automation: Full-auto PLC control systems (ZCUY-10 / ZCUY-12) with digital temperature monitoring (dry/wet thermometer) and automatic humidity and valve regulation.

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo Prjdpfx Akoz D Uvpsijc

Condition: like new (used), functionality: fully functional, Are you looking for a good unused like new Chip/swarf conveyor? We have 3 units units of different sizes available for sale. Please contact us for more information and sizes required. Each unit is a bargain at only €1,200 each Pjdpfx Aoy Ifm Ejkijrc

Condition: excellent (used), Full salad wash + dry line, previously washing and drying 350kg of product per hour Infeed elevator (4m x 0.5m) + vibrating pan Barrel leaf washer, capacity approx 350kg per hour. The barrel is 4.5m long x 0.8m diameter Prodjvzydaepfx Akisc De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt with air blowers and vacuum suction 3.5m x 0.8m De-watering conveyor belt 2.75m x 0.6m Vibrating pan 1.5m x 0.4m Lynnmore salad dryer 5.1m x 0.9m Hitec salad dryer 5.1m x 0.9m

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Pedpfx Akeyffqqoisrc Price negotiable.

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 Podpfx Aks Af Na Hoierc 4. Heating Power: 3.1 kW 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator Podpfx Aj Ad U Acskijrc 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. For inquiries or to arrange a viewing, please contact us at Dr. Dryice. All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Pjdpswg R Rmjfx Akijrc Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic Dry Ice Production Machine for Blocks, Slices, and Pellets For sale: a used ASCO BP407 automatic dry ice production machine. It produces dry ice blocks and slices in different thicknesses, as well as 3 mm and 16 mm dry ice pellets. Pedpfx Akoy R I Uqoijrc The product formats are integrated into the machine and selected via the touchscreen, so manual die changes are not required when switching between formats. Machine details: - Manufacturer: ASCO - Model: BP407 - Year of manufacture: 2003 - Operating hours: 12,635 - Condition: Used, fully functional - Products: Dry ice blocks, slices, and pellets - Pellet sizes: 3 mm and 16 mm - Stated maximum capacity: up to approximately 400 kg/h, depending on product format and settings - Reported production in use: approximately 250–300 kg/h - Operating hours since that service: 603 - Pump and cylinder have previously been replaced - Technical manuals, service reports, and maintenance history are available - Additional parts and spare parts are included The machine comes from a large industrial factory that replaced its production line and switched to another machine brand. The BP407 is now available for sale. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning. ASCO BP407, ASCO BP407 dry ice machine, ASCO dry ice production machine, automatic dry ice production machine, industrial dry ice machine, dry ice block machine, dry ice slice machine, dry ice pelletizer, dry ice pellet production machine, dry ice block and pellet machine, dry ice blocks and slices production, dry ice production equipment, dry ice manufacturing machine, CO2 dry ice production machine, carbon dioxide dry ice machine, 3 mm dry ice pellet machine, 16 mm dry ice pellet machine, used ASCO BP407, used dry ice production machine, second-hand dry ice machine, industrial dry ice production equipment.

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Psdpez Rv Tdsfx Akijrc Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1146401-001, tank capacity: 200 l, year of last overhaul: 2017, We are offering a used drum melter, model RobaDrum 200, from the manufacturer Robatech. The machine is no longer needed in our operations but was in daily use until a week ago, in conjunction with a wrapping machine (applying adhesive to foil on MDF/particleboard). The machine functions properly and is ready for immediate use. It shows some external signs of wear and has some adhesive residue, which is typical for normal industrial use, but this does not affect its operation. The machine underwent its annual maintenance by the manufacturer last summer. Pjdpfx Akoz Sy Smoiorc The machine was controlled via a control panel (see photo), which is included in the sale. Technical data: Manufacturer: Robatech Model: RobaDrum 200 Year of manufacture: 2017 Condition: Used, fully operational Application: Hotmelt and PUR adhesives Drum capacity: 200 liters Available for inspection in Winterswijk.

Condition: new, Year of construction: 2009, operating hours: 3 h, Cold Jet Aero 80 – Machine for professional use. This machine is suitable for industrial cleaning, including both small and very large projects. An advantage of this machine is that it does not contain the latest generation of electronics. It is one of the most robust machines on the market and is in excellent condition. Prjdpfeznnyxox Akiec Cold Jet Aero 80 FP – Dry Ice Blasting Machine, complete with the following equipment: COLD JET Aero 80 FP (3 hours of operation) 1 x 20’ blasting hose 1 x air hose 1 x Coldjet applicator 2 x nozzles We have various new parts in stock for Cold Jet machines. This is one of the best machines in the world. It contains no electronics, which is why it is reliable and not overly expensive to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold have a 1-year warranty. Repairs and maintenance of Cold Jet machines are available. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: good (used), Continuous Barrel Washer a robust, high-capacity washing solution designed for the efficient cleaning of root vegetables and produce in continuous processing lines. Psdpfx Ajzzpr Nokierc

Condition: used, Year of construction: 2015, Moretto OTX 600VP_Moretto drying hopper for plastic granulate, with a heating unit and accessories. (2015) Professional industrial drying hopper Moretto OTX 600VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater, hopper loader, and suction valve, this complete unit ensures optimal moisture removal and consistent material preparation prior to injection moulding or extrusion processes. Pjdpfx Ae Af Im Tekijrc Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 800VP 3. Year of Manufacture: 2015 4. Hopper Capacity: 800 litres () 5. Dry Weight (Hopper): 386 kg Integrated Components & Modules: 1. Air Heater Unit: 2. Model: Moretto HG 12V125X 3. Heating Power: 12.5 kW 4. Voltage / Frequency: 400 V / 50 Hz 5. Heater Weight: 60 kg 6. Hopper Loader / Receiver: 7. Model: Moretto R25 C52 8. Voltage: 24 V DC 9. Power: 0.011 kW 10. Loader Weight: 17 kg 11. Suction Valve: 12. Model: Moretto AV3550I 13. Valve Weight: 11 kg

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), NEDERLANDS Gebruikte SCHIELE Trockenkabine 80mm MW – Doorloopdroogcabine met elektrische uitrusting en schakelkast Wij bieden deze gebruikte SCHIELE-doorloopdroogcabine aan, inclusief elektrische uitrusting en schakelkast. Fabrikant: SCHIELE Model: Trockenkabine 80mm MW Bouwjaar: 2012 Ordernummer: 21204763 Beschrijving - 2 identieke compartimenten - Afmetingen per compartiment: 8 m breed × 16 m lang - Elk compartiment beschikt over een eigen verwarmingssysteem, circulatieventilatoren en gasbrander. Technische specificaties per compartiment Verwarming - Verwarmingsmedium: aardgas H - Verwarmingsvermogen: 120 kW - Maximale droogtemperatuur: 58 °C - Maximale temperatuur verwarmingsoppervlakken: 58 °C Luchtstromen - Circulatielucht: 2 × 22.500 m³/h (totaal 45.000 m³/h) - Regelbare toevoer verse lucht: 900–3.600 m³/h - Minimale afvoerluchtstroom bij 20 °C: 900 m³/h Ventilatoren en motoren - Circulatieventilatoren: 2 × 7,5 kW (totaal 15 kW) - Toerental: 1.450 rpm - Afvoerventilator: 1,5 kW - Toerental: 1.450 rpm Maximale oplosmiddeldoorvoer - 7.600 g/h (7,6 kg/h) Gasbranders – Weishaupt WG10N/1-D ZM-LN Elk compartiment heeft één gasbrander. De eerste foto toont het typeplaatje. - Vermogen: 25–110 kW - Regeling: modulerend / tweetraps - Brandstof: aardgas; LPG-geschiktheid afhankelijk van de configuratie - NOx-klasse: klasse 3 - Voeding: 230 V, 50 Hz - Gewicht: ca. 14 kg per brander Voor meer informatie kunt u ons een bericht sturen of telefonisch contact opnemen. ENGLISH Used SCHIELE Trockenkabine 80mm MW – Continuous-flow drying unit with electrical equipment and control cabinet We offer this used SCHIELE continuous-flow drying unit, complete with electrical equipment and control cabinet. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of construction: 2012 Order number: 21204763 Description - 2 identical chambers - Dimensions per chamber: 8 m wide x 16 m long - Each chamber has its own heating system, circulation fans, and gas burner. Technical specifications per chamber Heating - Heating medium: H-grade natural gas - Heating capacity: 120 kW - Maximum drying temperature: 58 °C - Maximum temperature of heating surfaces: 58 °C Airflows - Circulation air: 2 x 22,500 m³/h (total 45,000 m³/h) - Adjustable fresh air supply: 900–3,600 m³/h - Minimum exhaust airflow at 20 °C: 900 m³/h Fans and motors - Circulation fans: 2 x 7.5 kW (total 15 kW) - Speed: 1,450 rpm - Exhaust fan: 1.5 kW - Speed: 1,450 rpm Maximum solvent flow rate - 7,600 g/h (7.6 kg/h) Gas burners – Weishaupt WG10N/1-D ZM-LN Each chamber has one gas burner. The first photo shows the burner's nameplate. - Capacity: 25–110 kW - Control: Modulating / two-stage - Fuel: Natural gas; LPG compatibility depends on the configuration - NOx class: Class 3 - Power supply: 230 V, 50 Hz Prsdpfx Ake Aax Iboiec - Weight: Approx. 14 kg per burner For more information, please send us a message or contact us by phone.

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Podpfx Akszvgiusisrc Please check out our other listings and subscribe to our stock list.

Condition: like new (used), operating hours: 300 h, ASCO A120P Dry Ice Pelletizer 300 h Prjds Ad U Hnepfx Akijc A robust and reliable industrial dry ice machine, suitable for the production of high-quality dry ice pellets for cleaning, cooling, and transportation. Specifications Brand: ASCO Type: A120P Operating hours: 300 hours Ready for immediate use Major maintenance performed (2024) Service documentation available The machine comes with the original documents, including: Original ASCO service report Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, power: 26.7 kW (36.30 HP), We are offering this used Hobart 305GH dry steam convection oven / rapid steam oven, manufactured in 2017. Model: 305GH Serial number: 970221933 Rated voltage: 400 V Frequency: 50/60 Hz Phases: 3+N Connection power: 26.7 kW Current: 38.7 A Water inlet pressure: 1.7 - 10.0 bar Operating pressure: 1.0 bar Protection class: IP33 ML number: 305GH-31 Year of manufacture: 2017 Psdez Riwcepfx Akisrc If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Model MDH 2 Hosokawa Micron Dryer Flash Drying of Filter Cakes, Powders and Granules. Model MDH 2 Micron Dryer manufactured by Hosokawa Micron. Machine was built in 1995 for a pilot plant operation drying a Precipitated Calcium Carbonate (PCC) Filter Cake. The dryer ran periodically for around 2 years and has been in storage ever since. Installed Power – 30 kW (Rotor) 2,2 kW (Classifier) Airflow - 3,000 m3/hour Predszvxvaopfx Akiec Evaporative 310 kg H2O/hour Capacity - Scope of supply includes agitated twin screw feeder and lubrication system (for rotor drive). In-built dynamic classifier provides control on particle size and retention time. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Please check out our other listings and subscribe to our stock list.

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, Cold Jet i³ MicroClean – Compact Dry Ice Blasting Machine For sale: a used Cold Jet i³ MicroClean dry ice blasting machine, built in 2018 and with only 47 operating hours. The machine is fully functional and in very good condition. The i³ MicroClean is designed for precision dry ice cleaning. The optional DX pellet-shaving upgrade allows the machine to work with loose 3 mm pellets and dry ice nuggets. It can also be used with dry ice blocks. Machine details - Manufacturer: Cold Jet - Model: i³ MicroClean - Year of manufacture: 2018 - Operating hours: 47 - Condition: Used, fully functional - DX pellet-shaving upgrade: Available for €2,000 - Dry ice capacity with DX: approximately 4 kg - Variable feed rate: 0–0.23 kg/min, depending on pellet or nugget size and condition - Air consumption: approximately 0.85–1.4 m³/min at 5.5 bar, depending on nozzle - Included: 20 ft blast hose, applicator, and nozzle - Warranty: 1 year 1 x 20' blast hose 1 x Coldjet applicator Pedpfx Asydpy Tokisrc 1 x nozzle Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice Cold Jet i³ MicroClean, Cold Jet i3 MicroClean, Cold Jet i³ MicroClean DX, Cold Jet MicroClean DX, Cold Jet dry ice blaster, dry ice blasting machine, dry ice blasting equipment, precision dry ice cleaning machine, compact dry ice blasting machine, dry ice pellet blaster, 3 mm dry ice pellet blaster, dry ice pellet-shaving machine, dry ice microparticle blasting machine, dry ice nugget blaster, industrial dry ice cleaning machine, low air consumption dry ice blaster, used Cold Jet machine, used dry ice blasting machine, dry ice cleaning equipment for sale.

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Prodpfx Aszxzrpokioc Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.