Used Chen Hsong Em120-V for sale (35,299)

Condition: excellent (used), Year of construction: 2011, Machine Name : Chen Hsong EM120-V Year of Manufacture : 2011 Bedpfx Acsw Aw S Aj Tsdg Operating Hours : 58,209 Clamping Force (kN) : 1200 Injection Pressure (bar) : 1700 Cylinder Volume (cm³) : 203 Screw Diameter (mm) : 42 Horizontal Platen Size (mm) : 610 Vertical Platen Size (mm) : 560 Tie Bar Distance Horizontal (mm) : 410

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Bedpoznbqqjfx Ac Todg

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Bedpfxjzna T Re Ac Tjdg

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 88-MK6 with Sepro Industrial Robot Succes 7 / Hybrid Machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 ccm Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor with inverter drive - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Bdjdpozpanwofx Ac Tjg Robot Samfacc Year of manufacture: 2022 4-axis robot: 3 axes are driven with servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 128-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 41 mm Shot weight: 246 g Injection pressure: 1890 bar Dosing volume: 271 cc Clamping unit: Clamping force: 128 t Tie bar spacing: 410x410 mm Platen size: 620x605 mm Ejector: electric Bedpfszpankjx Ac Tedg Clamping unit: toggle Control: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by an inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 4000 kg Length/Width/Height: 4.90x1.30x1.80 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 208-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 52 mm Shot weight: 502 g Injection pressure: 1893 bar Dosing volume: 552 ccm Clamping unit: Clamping force: 208 t Tie bar spacing: 530x530 mm Platen size: 790x765 mm Ejector: electric Clamping unit: toggle Control system: BECKHOFF - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Control system with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine has been serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; Axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt available at an additional cost Bdsdpfx Acozpande Tog Dimensions: Weight: 6800 kg Length/Width/Height: 6.10x1.50x2.00 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2021, Chen Hsong JetMaster 468-MK6 with Samfacc robot / hybrid machine Year of manufacture: 2021 Injection unit: Screw diameter: 83 mm Bsdpfezpamtex Ac Todg Shot weight: 2043 g Injection pressure: 1840 bar Dosing volume: 2245 ccm Clamping unit: Clamping force: 468 t Tie bar spacing: 830x830 mm Platen size: 1210x1165 mm Ejector: electric Clamping unit: toggle Control: BECKHOFF - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 2 Control with hot runner system x 8 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving Central lubrication Automatic tool height adjustment Rexroth hydraulics The machine was serviced in Germany Samfacc robot Year of manufacture: 2022 4-axis robot: 3 axes are driven by servo motors (electric): X, Y (telescopic), Z; axis C – pneumatic Safety package for robots Robot with adapter, conveyor belt and safety guard Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 19800 kg Length/Width/Height: 8.80x2.00x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Bodpfx Aeznll Soc Tjdg

Condition: excellent (used), Year of construction: 2021, operating hours: 6,300 h, functionality: fully functional, machine/vehicle number: ADFL9004, clamping force: 80,000 kN, screw diameter: 98 mm, clearance between the columns: 1,020 mm, column diameter: 160 mm, displacement volume: 3,142 cm³, injection pressure: 1,794 bar, injection weight: 2,890 g, mold height (min.): 400 mm, ejector force: 182,000 N, ejector stroke: 280 mm, opening stroke: 1,000 mm, plate length: 2,020 mm, plate width: 1,440 mm, plate height: 1,440 mm, total length: 11,200 mm, total width: 2,400 mm, total height: 3,300 mm, overall weight: 35,000 kg, heating capacity: 39 kW (53.03 HP), pressure: 178 bar, number of injections: 1, pump power: 116,000 W, power: 163 kW (221.62 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 312 A, Equipment: documentation/manual, The machine has few operating hours and is in very good condition. It has been well maintained. The machine processes only ABS, PP, and PS. The machine is controlled by a Beckhoff system. The machine is equipped with a variety of additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 8 tool heating zones, a water manifold with 8 zones, a screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Water blocks are also included for both the moving and stationary tables, each with 8 connections. In addition, a number of spare parts are included, such as a complete torpedo, a screw, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter, a torpedo wrench, and auxiliary ejector rods. The machine is sold without the robot shown in the pictures. Bdedpfx Ajznlhmoc Tog

Condition: used, Year of construction: 1963, balancing body min/max. 30 - 5000 kg balancing body diameter with machining unit 2100 Bdodpfjzkbqpsx Ac Tsg distance of bearings kleinster 240 mm dia. axle journal 35 - 180 mm weight of the machine ca. 400 KG

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. Bedox Ein Sjpfx Ac Todg - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Condition: used, Year of construction: 2021, Exhibition unit (little used) Lubrication: Grease Max. output speed n2: 4,000 rpm Gear ratio (n1:n2): 1:0.8 Weight: approx. 8 kg Machine connection: HSK F63 Tool holder Usable width: 24 Bodpfxevvi Iwo Ac Tsdg Storage location: Garbsen

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Application: suitable for laid gratings Bjdpfen Tprnox Ac Tsdg for mesh size approx. 33 x 33 mm Included in delivery: 01x clamp fastening, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 100 x 32 x 15 mm (LxHxW) 01x bracket, II. choice (new goods) Material color: hot-dip galvanized dim.: approx. 50 x 25 mm 01x threaded rod M8, II. choice (virgin material) total length: approx. 100 mm 01x square nut M8, II. choice (new goods) Material color: hot-dip galvanized Total weight: 0,120 kg Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 8,060 mm, travel distance Y-axis: 1,210 mm, travel distance Z-axis: 760 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D sl, total height: 3,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, spindle speed (max.): 24,000 rpm, spindle motor power: 18,000 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 11,500 mm, number of axes: 5, This 5-axis Hamuel Reichenbacher Vision Flex was manufactured in 2021. It features an impressive X-axis travel of 8,060 mm, Y-axis travel of 1,210 mm, and Z-axis travel of 760 mm. The machine is equipped with a spindle speed of up to 24,000 rpm and a 20-station automatic tool changer. If you are looking to get high-quality machining capabilities, consider the Hamuel Reichenbacher Vision Flex vertical machining centre we have for sale. Contact us for further details. • Number of Axes: 5-Axis (C-axis ±360°, B-axis ±180°) • X-Axis Travel: 8,060 mm • Y-Axis Travel: 1,210 mm (+ 400 mm exchange stroke) • Z-Axis Travel: 760 mm • Axis Rapid Feed Rates: X = 80 m/min, Y = 60 m/min, Z = 40 m/min • Axis Acceleration: 6 m/s² • Spindle Speed: Up to 24,000 rpm • Main Spindle Power: 15 kW (S1 continuous), 18 kW (S6 max) • Spindle Torque: 14.3 Nm (S1), 17.2 Nm (S6) • Spindle Tool Holder: HSK-F63 • Max Tool Length / Weight: 240 mm / 6 kg • Tool Changer: 20-station disc changer (automatic) • with 19" TFT display and HT-2 handheld terminal • Supply Voltage: 400 V (3~ ±10%, 50 Hz) • Rated Current: 90 A • Input Fuse: 100 A (Ic < 17 kA) • Control Voltage: 24 V DC • Total Power: 45 kW • Compressed Air Supply: min. 7 bar, ca. 1,000 NL/min • Lubrication System: Central automatic lubrication system (3 L grease capacity) + Minimal Quantity Lubrication (MQL) with 3 L tank Bedozu N Uqopfx Ac Tsdg • Machine Weight: 10,000 kg • Machine Dimensions (Floor Space): approx. 11.5 m (X) x 3.0 m (Y) x 3.0 m (Z) Additional Equipment: • LEHMANN chip conveyor, EATON manual pendant station, pneumatically adjustable profile clamping blocks (8 beams), 2-channel control setup for concurrent setup/machining

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Bsdpfx Acszxzrpe Todg Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: good (used), Year of construction: 2002, - 2 chambers - Usable volume per chamber = 1100 liters - Internal dimensions per chamber = 1000 x 950 x 1000 mm (W x H x D) - incl. vacuum pump Bdodpszwfyzjfx Ac Tsg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 153-06SP0610, compressed air connection: 8 bar, Textile screen printing machine with 10 stations and 6 printing units (Made in Germany), with only 454,220 prints, and 2 x Digiflash Rutland intermediate dryers. The machine is fully functional, in good condition, and can be inspected in operation until the beginning of October. • 10 aluminum sandwich pallets 420 x 600 mm • 10 aluminum sandwich pallets 320 x 600 mm • Various squeegees • Power requirements: 3 x 400 V, 50 Hz, 16 A • Digital microprocessor control • Operation via touchscreen, text display optionally in various languages • Screen holder from the side • Pneumatic screen clamping • Double indexing and ½ indexing • Control panel on each printing arm • Registration accuracy 0.025 mm • Adjustable cycle speed • Gap setting Optionally, a Rutcure Master 18 drying tunnel can also be purchased, with a chamber length of 260 cm, belt width of 105 cm, and 18 kW, manufactured in 2007. Price: 2,300 euros (negotiable). Bedpfx Acjztqy So Tjdg

Condition: ready for operation (used), Year of construction: 2017, A Reichenbacher CNC multi-spindle woodworking center with automatic support table and vacuum pins is available. Traverse path X1/X2: 8540mm, traverse path Y1: 2500mm, traverse path Z1: 480mm, swivel B: 180°, swivel C: 360°, X3 axis: underfloor drilling unit, U2-U10: carrier movement 1-9 (gantry), axis speed X/Y/Z: 60m/60m/20m/min, turning speed B/C: 90°/s, table dimensions X/Y: approx. 8500mm/2600mm, max. workpiece weight: 150kg, max. workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9. Workpiece dimensions X/Y: 8500mm/2600mm, number of carriers: 9, suction plates per carrier: 8, suction plate diameter: 100mm, carrier positioning: +/-1000mm, min. carrier distance: 300mm, total vacuum pump number: 72, vacuum pump stroke: 100mm, vacuum pump useful stroke: 25mm, tool positions: 24, max. tool weight: 6kg, max. tool length: 240mm, max. tool diameter: 300mm. Total system dimensions X/Y: approx. 15000mm/8000mm, weight: approx. 20000kg. Documentation available. On-site inspection is possible. Expected to be available from the end of September 2025. Bedpfxjw Azuzo Ac Tsdg

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: AHG0482, workpiece weight (max.): 7,000 kg, total width: 2,400 mm, total length: 5,100 mm, total height: 2,000 mm, input voltage: 400 V, rotor diameter: 1,600 mm, year of last overhaul: 2026, The testing machine is currently in operation. Due to a relocation of operations, it can be dismantled in February 2027. The drive has been converted to direct current. Bjdpfxezu Rgus Ac Tjdg We use the system as follows: up to 7000 kg, up to 700 rpm up to 2500 kg, up to 1500 rpm up to 1500 kg, up to 3000 rpm up to 250 kg, up to 4200 rpm The system can be inspected in Neusäß by prior arrangement.

Condition: good (used), Control card, controller, PLC controller, optical card, optical control card, optical interface -Manufacturer: Dr. Schenk Industriemesstechnik, Optical Control Card -Type: XVP2, Optical 4160631 -Box dimensions: 280/200/H50 mm -Weight: 0.8 kg Bdedpfx Ashh Dt Soc Tog

Condition: used, Spiral seal, labyrinth housing seal -Various sizes see photos -Price: complete Bdjdpfxeb A S Dvs Ac Tsg -Weight: 10 kg

Condition: ready for operation (used), Year of construction: 2006, A Reichenbacher CNC 5-axis twin-head machining center for the door manufacturing industry is available. Spindle power: 15kW, Speed: 24000rpm, Tool interface: HSK-F63, Tool positions: 60, Milling spindle spacing: 1040mm, Spindle housing dimension: 150mm, Travel X/Y/Z: 5100mm/2100mm/2650mm, Tool change stroke: 550mm, Max. travel speed X/Y/Z: 60m/min/90m/min/20m/min, Clamping beam speed: 40m/min. Vacuum support rails: 2, Vacuum cups: 2×30, Stop stroke: 150mm, Stop pin diameter: 30mm, Through-feed stop 1/2: 300mm/700mm, Max. veneer overhang: 5mm, Max. veneer thickness: 5.5mm. Workpiece length range: 800mm-3200mm, Workpiece width range: 600mm-1400mm, Workpiece thickness range: 38mm-72mm, Max. workpiece weight: 200kg. Chip conveyor belt width: 700mm, Infeed roller conveyor dimensions X/Y: 6000mm/1600mm, Outfeed roller conveyor dimensions X/Y: 6350mm/1600mm. Overall system dimensions X/Y/Z: approx. 18300mm/9750mm/3500mm, Machine dimensions X/Y/Z: approx. 4200mm/1600mm/3000mm, Machine weight: approx. 10500kg, Control system: Siemens Sinumerik 840D power-line. Including fully automatic infeed and unloading, 2×gantry cranes, safety equipment, various tools and a self-lowering roller table. This system was modernized in 2016. Documentation vorhanden. An on-site inspection is possible. Bdedpfx Aezqu Hwoc Teg

Condition: used, Year of construction: 2006, machine/vehicle number: 1961, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 72 mm, number of slots in tool magazine: 60, controller manufacturer: Siemens, total length: 18,300 mm, total width: 9,710 mm, number of spindles: 2, Retrofitted in 2016 Ready for operation Bdedox Ezh Tjpfx Ac Tog Includes stacking and unstacking gantry crane

Year of construction: 2020, condition: used, Manufacturer: Minebea Intec Aachen Model : Vistus-C 50x35 Year : 2020 Type: Metal detector Conveyor width: 40 cm Maximum clearance height: 30 cm Ejection system: belt stop Bedpey Abcfsfx Ac Tedg HMI : new Machine dimensions: 288 x 100 x 147 cm

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Bdjdpfx Aor E D Eaec Teg Conveyor belt for removing the scrap metal Suction Ruwac Zone 22