Used Cermex Sl2100 for sale (12)

Condition: used, Year of construction: 1990, Manufacturer : CERMEX Isdsx R A H Uepfx Am Isia Model: SL2100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Adjustable format changeover Previous format : Length: 398 mm Width: 260 mm Height: 315 mm   Mini / maxi cases: to be confirmed according to specifications Mini / maxi cartons: to be confirmed according to specifications

Condition: used, Year of construction: 1997, Overview  This complete Bag‑in‑Box filling line was manufactured by OETTEL Maschinen GmbH, CERMEX, and PRECIA MOLEN. The line is designed for filling water and syrup into Bag‑in‑Box formats. It was in service until September 2025 and is currently stopped, still installed, with energy disconnected. The line is described as fully operational, is available immediately, and can be visited on request. Preventive maintenance was carried out twice per year; the last maintenance took place in January 2025. Palletizing, stretch wrapping, and pallet labelling equipment were upgraded in 2017 and 2023. Technical data Capacity: 5 L BIB: 650 BIB/hour / 7 pallets/hour 19 L BIB: 420 BIB/hour / 13 pallets/hour Formats: 5 L / 19 L Bag‑in‑Box Application: Water and syrup Configuration: Carton forming, Bag‑in‑Box filling, checkweighing, carton closing, conveying, palletizing, stretch wrapping, pallet labelling Scope of Delivery  Carton erector | CERMEX | F37 | 1999 | Formeuse de carton Bag‑in‑Box filler | OETTEL | A 4001 | 1999 | BIB filling machine Checkweigher | PRECIA MOLEN | X241‑DCKW | 1999 | Weight control Carton closer | CERMEX | C642.41 | 1999 | Carton closing Carton conveyors | ANDUZE |- | 1998 | Conveyor system Labeller | VIDEOJET | APL 210 LH | - | Carton labelling Palletizing robot | BEMA | - | 2017 | Fanuc robotic palletizing system Stretch wrapper | BEMA | Silkworm LS | 2017 | Stretch wrapping unit Pallet labeller | LOGOPAK | - | 2023 | Pallet labelling machine   Iiedpfx Ajymr U Esm Ioa

Condition: used, Year of construction: 2019, Overview The shrink packer CERMEX CP18 CAE was manufactured in 2019 by the French company CERMEX. This is a shrinkwrapper with accompanying sealing bar. The machine has run only 1,100 hours and is immediately available, as the production in the factory was stopped in 2022. Truck loading is included. Technical data Capacity: Up to 40 ppm (packs per minute) Formats: 75cl – 3x2 Dimensions: L. 623 cm × W. 250 cm × H. 210 cm Working table height: Adjustable from 0.9 m to 0.95 m Electrical power: 30 kW Iiodewgyx Tepfx Am Isa

Condition: used, Year of construction: 1990, Manufacturer : CERMEX Model : SL1 100 Type : Case packer Year: 1990 Automatic machine for grouping and boxing products Side boxing with tape sealing (adhesive tape) Iodpfx Aox R D A Djm Ijia Number of formats available: 5 units (size available on request) Format change via settings + format parts Cardboard box dimensions: Length: 250 to 550 mm Width: 150 to 380 mm Height: 125 to 325 mm Product dimension : Length: 80 to 170 mm Thickness: 20 to 60 mm Width according to box length

Condition: excellent (used), Year of construction: 1995, - Model: F 385.41 Ijdpfx Aowifn Ejm Ijia - 4 cartons of 3 x 2 bottles per cycle - Cartons: many different sizes - Full carton control: with bottle counter system - With MASPACK SMISTATRICE single-row bottle stacker (2007) for pressureless bottle stacking - Machine in perfect condition

Condition: used, Nordson Heißleim Gerät 3400 V 2002 capacity / hour ca.: 1500 Strom / Volt: 380 Iijdpexytqyefx Am Iea

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph Iiodpfxovgva Uo Am Ija The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, mileage: 177,395 km, power: 315 kW (428.28 HP), first registration: 10/1999, overall weight: 35,000 kg, fuel type: diesel, color: yellow, axle configuration: 8x4, maximum load weight: 14,855 kg, empty load weight: 20,145 kg, wheelbase: 4,500 mm, brakes: constant throttle, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, immobilizer system, low noise, parking heater, power assisted steering, seat heater, Vehicle location: Bovenden, Mtlg. house, 1x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heating, air horn, switch 16, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, raised exhaust, differential lock, fog lights, driving lights, work lights, rotating beacon, storage box, leaf suspension, low-noise G1, winter service equipment, 2-axle forward steering, U-protection, rear outlet, roof hatch, red environmental badge Wheelbase: 4500 mm Body: Suction and flushing vehicle Müller type Canalmaster F170K approx. 17m³ (10,000l sludge chamber/2x 3.500l water tank) 7.5t front axle, rear axle H7 13t crown wheel 300, EPS gearbox 16-speed, drum brakes on front and rear axle, parameterizable special module (PSM), additional thermal insulation, additional hot air heating, flame system, automatic daytime running lights, transmission oil cooling, comfort package, auxiliary drive countershaft MB 2c, auxiliary drive independent of transmission (NMV) i=1.09. -Müller Canalmaster F 170 K -High pressure pump Uraca KD 716 G/60 170bar/325l/min -SL2100 vacuum pump -Bosch HY/ZFFS 15/19+8 oil pump -Eberspächer V7S heater Iiodpfx Ajvhi Ubjm Ija -Mud chamber approx. 10.000l -2x set water tanks approx. 3,500l -Swivel suction hose holder DN 100 The body and the reel are encased for winter operation! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line Iodpfx Ajwahdqjm Ieia This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: Iodpfx Amev U Ni So Ijia 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Year of construction: 2008, functionality: fully functional, BAG IN BOX LINE Year: 2002 | 2008 Speed: 1,600 pieces/h Iiedpowdiqgsfx Am Ija Composed of: UTCH fillers Model: BIB 860 Number of valves: 2 Formats: 2.25 l - 3L - 5 L Case erector CERMEX Type: gluer Boc closing machine CERMEX Type: Gluer Wrap-around NOVOPACK Formats: - 2x2 of 2.25 L - 2x2 of 3l - 2x2 5l Safety protections

Condition: like new (used), Used Bottling Line | Used Beverage Line | Wine MBF NP 574 | Bottling Line for Still Wine Year: 2011 Speed: 10,000 Bph Cork elevator Filling Monoblock MBF 45.50.6 | Year: 2011 Rinser 45 clamps Iijdjtr Hd Sepfx Am Ija Filling machine 50 valves Capper 6 screw heads Bottle dryer Bottle inspector | Level control Sacmi Kube | Labeling machine Year: 2017 No.6 adhesive stations Cermex carton moulder Gluer Nordson TMG cartoning machine DS Smith carton closer Nordson Gluer Carton weigher CONVEYOR BELTS ABSENT