Used Centrica Business Solutions Trigeneration Plant 1,262 Kw for sale (42,199)

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: MTU 12V4000 L33, type of input current: three-phase, total height: 5 mm, total length: 25 mm, total width: 3 mm, type of cooling: water, Equipment: documentation/manual, rotational speed infinitely variable, Plant assembled and NEVER put into operation Cogeneration Unit MTU 12V4000 L33 GAS GENERATOR SET Condition: New – 0 hours Enclosure: Enclosed container Rated electrical power: 1,262 kW Thermal power: 1,355 kW Electrical efficiency (cos φ = 1.0): 42.1% Thermal efficiency: 45.2% Total efficiency (full heat recovery): 87.3% Fuel consumption: • At 100% load: 299 Nm³/h • At 75% load: 232 Nm³/h • At 50% load: 167 Nm³/h Manufacturer: MTU – Centrica Business Solutions Srl Equipment designation: Type: E1265 250 Nox L33 Natural Gas CHP Unit Configuration: Containerized Rated current: 1,935 KVA Engine: Genset Rolls Royce MTU 12V4000L33 Number of cylinders: V12 Max engine power: 1,320 kW Generator: Stamford Model: PE734E-312 Type: Three-phase, synchronous, four-pole, brushless Rated voltage: 400 V Frequency: 50 Hz Dimensions (L x W x H): 12,800 / 2,700 / 2,900 mm Absorption Unit CARRIER 16LJ-F41 Condition: New – 0 hours Enclosure: Enclosed container Capacity: 1,178 kW Cooling System Flow rate: 56.4 L/sec Pressure: 45 kPa Connection (DIN): 8” (inch) Volume: 0.48 m³ Heat Rejection System Flow rate: 93.1 L/sec Pressure: 117 kPa Connection (DIN): 10” (inch) Volume: 1.39 m³ Dimensions (L x H x W): 5,330 x 3,080 x 1,690 mm Dkedpfeydqlqsx Acnsr Weight: 13,700 kg Evaporative Cooling Towers: No. 2 Condition: New – 0 hours

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. Dkjdpsyhc Irsfx Acnjr - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0496, pressure: 11.76 bar, power: 1,395 kW (1,896.67 HP), operating pressure: 12 bar, temperature: 190 °C, operating temperature: 190 °C, total height: 1,600 mm, total length: 3,000 mm, nominal heat output: 1,395 kW (1,896.67 HP), total width: 1,360 mm, nominal power: 1,395 kW (1,896.67 HP), empty load weight: 3,200 kg, GAVARDO OMG 1200 Complete Industrial Steam Boiler Plant – 1395 kW – 2000 kg/h (2016) High-Capacity Industrial Steam Generation System for Continuous Factory Operation. Complete central steam plant removed from a professional textile factory. Suitable for immediate reinstallation in industrial production. Dkedpfx Aozkggcocnor The GAVARDO OMG 1200 is a high-efficiency industrial steam boiler plant manufactured by GAVARDO Caldaie S.r.l., Italy. Designed for demanding industrial applications, this heavy-duty steam generation system delivers up to 2,000 kg of saturated steam per hour and is suitable for continuous 24/7 production environments. The system was previously installed in a professional textile manufacturing facility, where it served as the central steam supply for production. It remained fully operational until the factory shutdown. The boiler plant is offered as a complete industrial package, including the Riello burner, electrical control cabinet, pumps, pressure equipment, water handling components, and associated accessories. Technical Specifications • Manufacturer: GAVARDO Caldaie S.r.l. • Model: OMG 1200 • Boiler Type: Horizontal Industrial Steam Generator • Year: 2016 • Serial Number: 0496 • Thermal Capacity: 1,395 kW • Steam Production: 2,000 kg/hour • Maximum Working Pressure: 11.76 bar • Maximum Operating Temperature: 190.7 °C • Dry Weight: 3,200 kg • CE Marked • Manufactured in accordance with European Pressure Equipment regulations Key Features • Complete industrial steam boiler plant • High-capacity continuous steam production • Designed for 24/7 industrial operation • Riello industrial gas burner • Digital boiler control system • Industrial electrical control cabinet • Pressure monitoring and safety systems • Industrial feed-water and circulation equipment • Heavy-duty insulated boiler construction • Suitable for integration into existing steam distribution networks Includes • GAVARDO OMG 1200 steam boiler • Riello industrial gas burner • Main electrical control cabinet • Feed-water pumps • Water treatment equipment • Pressure vessels • Steam piping connections • Expansion and condensate tank system • Safety valves and pressure controls • Flue gas connection Applications • Textile manufacturing • Garment production • Industrial laundry facilities • Food processing • Steam process industries • Industrial heating systems • Continuous manufacturing plants Condition • Used industrial condition • Fully operational prior to factory shutdown • Installed in a professional indoor production environment • Good structural and mechanical condition • Normal cosmetic wear consistent with industrial use • Available for inspection before dismantling Location Valga, Estonia Dismantling & Transport Buyer is responsible for dismantling, rigging, loading, transportation, and all related costs. Professional dismantling is strongly recommended due to the size, weight, gas connection, pressure equipment, and associated piping systems. The site offers good access for heavy transport and lifting equipment. Sales Terms Sold as-is, where-is, without warranty. Part of the MASI JEANS factory liquidation.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Maximum turning diameter: approx. 300 mm Maximum turning length: approx. 300 mm Spindle bore diameter: approx. 52 mm Maximum main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Control system: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Dkedpfeznb Ntsx Acnsr Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Complete technical documentation

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 1013, REF: MM6216 1 X Comek vertical form, fill and seal bagging machine with Zodiac HS screen Djdpexd Ubnsfx Acnokr Technical specification ⚙️ ✅ Manufacturer - Comek Automatic Packaging Solutions ✅ Model - VPB 330 EVO. ✅ Date of manufacture - 2019. ✅ Weight - 2,500 Kg ✅ Installed power - 10 Kw ✅ Sealing jaws - 330mm (horizontal) x 460mm (vertical). ✅ Overall dimensions - 2000mm long x 1500mm wide x 1800mm high. Note 🗒️ No printer.

Condition: ready for operation (used), Year of construction: 2022, travel distance X-axis: 1,270 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: 0i-F, total height: 3,107 mm, total width: 3,350 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,692 mm, number of axes: 3, This 3-axis DN SOLUTIONS MYNX 6500 II was manufactured in 2022 but was never in production. It features a table size of 1,400 x 670 mm and a rapid traverse of 30 m/min in both X and Y axes. The machine is designed for heavy-duty milling with box guideways for maximum rigidity. If you are looking to get high-quality milling capabilities, consider the DN SOLUTIONS MYNX 6500 II vertical machining centre we have for sale. Contact us for further details. • As new, showroom model • Table size: 1,400 x 670 mm • Rapid traverse (X/Y/Z): 30 / 30 / 24 m/min • Tool magazine capacity: 40 stations • Maximum workpiece weight: 625 kg • Guideway type: Box guideways on all axes • Memory: 400 tool offset memory slots • Cooling system: Milling spindle cooling • Stability/construction: Highly stable design for heavy-duty milling; box guideways provide maximum rigidity and vibration damping • Spindle: High-performance spindle with high torque characteristics • Automation/Safety (machine features): Load monitoring; Auto shut-off • Maximum height when the Z-axis is fully extended: 3107mm Additional equipment • Oil skimmer (filtration) • Bar feeder interface (prepared for external bar feeder) • basic package of tool holders included • no bar feeder included (can be purchased optional, price upon request) • no chuck included • retrofits possible (price upon request) Technical Specification Taper Size ISO 40 Dodpfx Aszn Uqqscnskr

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Ilpra Packaging Solutions thermoformer fitted with Siemens S7 1200 PLC control panel and ILPRA thermo-transfer printer mod. I-PRINT (printing area 53 x 400mm). Supplied with 5 x sets of tooling. Manufacturer - ILPRA S.p.A. Model - Formpack F0 TMF Long Version. Date of manufacture - 2019. Can be used for flexible, semi-rigid and rigid film packs. Speed - Output with sizes 2.2 and 4.2: approx 4/5 cycles per minute, Output with size 2.1: approx 5/6 cyclese per minute. Film width - up to 420mm wide. Maximum diameter of forming film reel - 400mm. Dkjdpewp Ac Hjfx Acner Reel core diameter - 76mm. Thickness - 500 microns. Maximum diameter of top web film reel - 250mm. Reel core diameter - 76mm. Type of useable sealing film - plastic, aluminium, medical paper, Tyvec. Electric supply - 400 V / 50 hz / 3 phase. Compressed air supply -7 bar. Vacuum pump - Busch. Tooling external dimensions (internal) - Set 1 - 2x1 format: 197.5mm (177.5mm) x 300mm (280mm). Set 2 - 4x2 format: 98.75mm (78.75mm) x 150mm (130mm). Set 3 - 2x2 format: 190mm x 150mm x (122mm diameter). Set 4&5 - 2x2 format: 197.5mm (177.5mm) x 150mm (130mm). Previously used for packing various meat products. Last run in May 2025.

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,500 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 30 mm, travel distance Z-axis: 340 mm, spindle motor power: 15,000 W, total height: 1,693 mm, total width: 1,595 mm, controller manufacturer: FANUC, controller model: 0i-F Plus, product length (max.): 2,350 mm, number of axes: 4, This 4-axis DN SOLUTIONS LYNX 2100MB was manufactured in 2022. As new, showroom model. It features a maximum spindle speed of 4,500 RPM and a possible chuck size of up to 8" (204 mm). The machine is equipped with a tool turret with 12 stations and a bar capacity of 65 mm. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS LYNX 2100MB horizontal turning machine we have for sale. Contact us for further details. • As new, showroom model • Chuck size possible : 8" (204) No chuck included • Bar capacity: 65 mm • Y travel: 30 / 36 mm • Turret stations: 12 • Turret interface: BMT 45 • Guideway type: Linear guideway • Cooling system: Coolant pump 7 bar • Design: High-performance compact turning center with a space-saving design • Productivity: Fast idle times; tool turret with BMT interface • Application: Suited for producing small parts with high precision Additional equipment • Bar feeder interface • Chip conveyor • Parts catcher • Tool setter (electric) • Oil skimmer • 3-color signal light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is supplied with a standard basic package: turret fully equipped, base holder included.Optional: • 2 pcs. External turning tool holder BMT45 20x20 single (500-0665) • 1 pc. Facing tool holder BMT45 20x20 left/right (500-0668) • 1 pc. External turning tool holder BMT45 20x20 double left (500-0675) • 1 pc. Parting tool holder BMT45 20x20 single (500-0671) • 2 pcs. Internal turning tool holder BMT45 Ø32 single left (500-0680) • 1 pc. Internal turning tool holder BMT45 Ø20 triple (500-0678) • 1 pc. Cover IK (500-0642) • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set Boring • 1 pc. Reducing sleeve set U Drill • 1 pc. Reducing sleeve set OD 32 ID 20/25 (500-0710) • 1 pc. PRECI-FLEX adapter set PRECI-FLEX ER20 (BMT 45P) (500-0524) • 2 angled externally cooled Eppinger AGWs • 2 straight externally cooled Eppinger AGWs Technical Specification Counter Spindle No Djdpfeyrt E Nex Acnjkr Driven Tools No

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: Dksdpfxszhg Eyj Acner The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) Dodezhudwspfx Acnekr HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 495 mm, travel distance Z-axis: 780 mm, spindle motor power: 37,000 W, spindle speed (max.): 2,000 rpm, total height: 3,636 mm, total width: 2,860 mm, controller manufacturer: FANUC, controller model: 0i-F Plus iHMI-Touch, product length (max.): 2,005 mm, number of axes: 3, This 3-axis DN SOLUTIONS PUMA V8300MR vertical turning machine was manufactured in 2023. As new, showroom model. It features a maximum turning diameter of 830 mm and a turning length of 690 mm. The machine is equipped with a powerful spindle offering 2,592 Nm of torque and a rapid traverse of 20 m/min. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA V8300MR machine we have for sale. Contact us for further details. • Condition: Showroom machine, like new • Chuck size (main spindle): up to 15" (380 mm) (not included) • Bar capacity: 60 mm • Rapid traverse (X/Z): 20 / 20 m/min • Spindle torque: 2,592 Nm • Max turning diameter: 830 mm • Max turning length: 690 mm • Tool stations: 12 • Tool holder: BMT 75P • Guideway type: Box guideway • Monitor size: 19" • Main features: • Powerful, very compact vertical turning center • Standing spindle; optimal crane loading and operator accessibility • Extremely rigid cast bed • High torque main spindle • Compact machine design • Optionally driven tools with high torque (possible) • High-quality, robust box guideways • Rapid traverse up to 20 m/min Additional equipment Dkodpfx Aceyrr Rwenor • Coolant pump, 10 bar • Oil skimmer • 3-color warning light • Optional: Chip conveyor (hinge belt conveyor). Price on request • Machine is delivered with standard basic package: Turret fully equipped, base holder included. Technical Specification Driven Tools No

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank Djdpjzdz Nfsfx Acnskr

Condition: excellent (used), SLM Solutions SLM 500 HL Professional system for the additive manufacturing of metal components using selective laser melting. Suitable for industrial applications, prototype construction, toolmaking, aerospace, medical technology, and series production. Technical data Manufacturer: SLM Solutions Type: SLM 500 HL Year of manufacture: 2015 Build volume: 500 x 280 x 365 mm Laser configuration: Quad-fiber laser 4 x 400 W Max. build rate: up to 105 cm³/h Layer thickness: 20 µm to 75 µm Min. feature size: 150 µm Beam focus diameter: 80 - 115 µm Max. scanning speed: 10 m/s Supply voltage: 400 V / 50 Hz, 3/N/PE Control voltage: 24 V DC Rated current: 36 A Heating power: 2.4 kW Protection class: IP50 Compressed air requirement: 50 l/min at 6 bar Special features Patented multi-beam technology Automatic powder management PSX sieving station PRS unpacking station Laser class 1 CE marking available Service / Operating history The system was used exclusively for processing aluminum from the beginning and operated under a nitrogen atmosphere. It operated reliably until decommissioning. During the last maintenance, the oxygen sensors, including the evaluation unit, were updated to the latest version. The system was then professionally decommissioned. Cooling unit Manufacturer: Riedel Type: WKS 101.2M5LE.I Year of manufacture: 2016 Refrigerant: R134a Filling quantity: 3.0 kg Operating pressure HD: 18.7 bar Protection class: IP54 Dedoza Ethspfx Acnjkr Scope of delivery according to delivery note SLM 500 HL laser melting system, approx. 2680 kg Riedel cooling unit WKS101.2M5LE.I, approx. 200 kg SLM filter system, approx. 150 kg SLM unpacking station PRS 500, approx. 855 kg SLM sieving system PSX 500, approx. 690 kg Logitrans lifter LFSM 1002/1620, year of manufacture 2015, approx. 550 kg 2 x SLM build cylinders, each approx. 205 kg SLM spare parts / piping Dimensions / Weight Complete system according to manufacturer's specifications: approx. 5200 x 2800 x 2700 mm Weight according to manufacturer's specifications: approx. 3100 kg in operating condition approx. 2400 kg without powder Condition Used system from industrial application. The system has been dismantled and stored. Optical condition as shown in the pictures. Scope of delivery as shown in the pictures. Inspection and testing on-site are possible by arrangement and are highly recommended. Important note: All information is provided to the best of our knowledge based on available documents, software displays, manufacturer data, delivery note and nameplates. Deviations in technical data are possible. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), Year of construction: 2024, spindle motor power: 22,000 W, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 105 mm, controller manufacturer: FANUC, controller model: i Series, number of axes: 4, This 4-axis DN SOLUTIONS PUMA 2600Y II was manufactured in 2024. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a main spindle speed of 4,000 rpm and a turret with 12 tool stations. If you are looking to get high-quality turn-mill capabilities, consider the DN SOLUTIONS PUMA 2600Y II machine we have for sale. Contact us for further details. • 15" color touchscreen display • iHMI Easy Operating System (EZI & Machining Cycle) • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Number of axes: 4 (X, Z, Y, C) • Maximum turning diameter: 376 mm • Maximum turning length: 760 mm • Bar capacity: 81 mm • Main chuck size: 255 mm (10") • Hardened & ground hard jaws • Main spindle motor power: 22 / 15 kW • Built-in spindle design • C-axis functionality • Milling spindle power: 7.5 / 1.5 kW • Live tool speed: up to 10,000 rpm • Turret type: BMT65P • Number of tool stations: 12 • Automatic electric tool setter • Programmable live tailstock • MT5 live center • Coolant pump: 1.1 kW / 1.0 MPa / 20 L/min • Flood coolant for rotary tools • Coolant tank on right side • Thermal compensation structure • Chuck clamp confirmation • Bar feeder interface • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • 128 tool offset pairs • 8 work coordinate systems • Built-in transformer • Electrical line filter • 3-color signal tower (red / yellow / green) • Tool number display Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer Dkedpfx Acszlqpqjnor • Parts catcher with collection box • Coolant gun • Air gun

Condition: like new (used), functionality: fully functional, Very good condition, the machines looks like new. Angle sealing machine and shrink tunnel Manufacturer: AVC Sealing Solutions Angle sealing machine, type HS-500 Sealing strip: 500 x 600 mm Machine dimensions: 1780 x 1020 x 1120 Shrink tunnel, Type 1000 Tunnel opening: 440 x 300 mm Shrink length: 1000 mm Machine dimensions: 1800 x 1100 x 1600 Maximum heating power: 11 kW Dkedpfxszpd Izj Acnjr

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 5700 was manufactured in 2024. It features an X-axis travel of 1,050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1,300 × 570 mm and a maximum table load of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 5700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display Dkedpfjzlg Uijx Acner • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,300 × 570 mm • Spindle taper: BIG PLUS BT40 • Spindle motor power: 15 / 11 kW • Spindle head cooling system • Tool magazine type: geared driven • Tool holder: BIG PLUS BT40 • Rapid traverse rates: X/Y 36 m/min, Z 30 m/min • Through-spindle coolant: 2.0 MPa (20 bar), 4.0 kW • Flood coolant pump: 0.4 kW, 0.15 MPa, 40 L/min • Built-in transformer • Electrical line filter • Ethernet interface • Data server & memory card: 1 GB • Program storage capacity: 5,120 m (2 MB) • 1,000 program capacity • AICC II – 200 blocks • iHMI easy operating system (EZI & Machining Cycle) Additional equipment • Hinged belt chip conveyor (right side) • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Portable MPG handwheel • Additional axis preparation (1-axis wiring & pneumatics)

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 18,000 rpm, travel distance X-axis: 1,020 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 805 mm, controller manufacturer: FANUC, controller model: 31i-b5, spindle motor power: 22,000 W, table load: 800 kg, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DN SOLUTIONS DVF 8000 was manufactured in 2022. It features impressive X-axis travel of 1,020 mm, Y-axis travel of 850 mm, and Z-axis travel of 805 mm. The machine includes a maximum workpiece diameter of 1,000 mm and a spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DVF 8000 universal machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Number of axes: 5 (X, Y, Z, A, C) • Simultaneous 5-axis machining • Absolute feedback system (absolute pulse coder on A- and C-axis) • Table diameter: 800 mm • Maximum workpiece diameter: 1,000 mm Dkjdpfxjzlg Ngo Acnsr • Maximum workpiece height: 630 mm • Spindle motor power: 22 / 18.5 kW • Spindle taper: HSK-A63 • Tool holder type: HSK63A • Flood coolant pump: 2.5 kW / 0.44 MPa / 100 L/min • Through-spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Tool load monitoring • Portable MPG handwheel • Automatic power off • Program storage: 10,240 m (4 MB) • 1,000 program capacity • 400 tool offset pairs • 48 work coordinate systems • Large capacity memory: 2 GB • Data server & memory card: 2 GB • Embedded Ethernet • iHMI easy operating system (EZI & Machining Cycle) • DSQ1 (AICC II – 200 blocks) Additional equipment • Hinged belt chip conveyor (rear side) • Cyclone filter system • Renishaw probe ready (RMI-Q) + software • External power transformer • Electrical line filter • Machine lifting hooks

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,300 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: i series, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 6700 was manufactured in 2024. It features an impressive X-axis travel of 1,300 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine includes a robust table size of 1,500 × 670 mm and a maximum table load of 1,300 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 6700 vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3-phase AC 380V / 50Hz • Table size: 1,500 × 670 mm • Spindle motor power: 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle head cooling system • Tool magazine type: geared driven • Tool holder type: BIG PLUS BT40 • Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through-spindle coolant: 1.5 kW / 2.0 MPa (20 bar) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • Program capacity: 1,000 programs • AICC II – 200 blocks • iHMI Easy Operating System (EZI & Machining Cycle) • Built-in transformer • Electrical line filter Additional equipment Dsdpfx Ajzlg Icecnjkr • Hinged belt chip conveyor (right side) • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics)

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,630 mm, travel distance Y-axis: 762 mm, travel distance Z-axis: 650 mm, controller manufacturer: FANUC, controller model: i Series, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 28,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DN SOLUTIONS DNM 750 II was manufactured in 2023. It features an impressive X-axis travel of 1,630 mm, Y-axis travel of 762 mm, and Z-axis travel of 650 mm. The machine includes a robust table size of 1,800 × 750 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the DN SOLUTIONS DNM 750 II vertical machining centre we have for sale. Contact us for further details. • 15" color touchscreen display • Absolute feedback system • CE certified • Metric configuration • Power supply: 3 Phase AC 380V / 50Hz • Table size: 1,800 × 750 mm • Spindle motor power: 28 / 15 / 11 kW • Spindle taper: BIG PLUS BT40 • Spindle air curtain • Tool holder type: BIG PLUS BT40 • Flood coolant pump: 0.4 kW / 0.15 MPa / 40 L/min • Through spindle coolant: 4.0 kW / 2.0 MPa (20 bar) • Machine enclosure: Full splash guard with top cover • Tool load monitoring • Portable MPG handwheel • Additional axis preparation (1 axis wiring & pneumatics) • Embedded Ethernet • Program storage: 5,120 m (2 MB) • 1,000 program capacity • Data server & memory card: 1 GB • AICC II – 200 blocks • iHMI easy operating system (EZI & machining cycle) • Built-in transformer • Electrical line filter Djdpfxezlg Amo Acnskr Additional equipment • Hinged belt chip conveyor (right side) • Coolant tank on right side • Belt-type oil skimmer • Coolant gun • Air blower • Air gun • Machine lifting hooks

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Dedpfx Acjzhlr Ejnekr Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives Dksdpjflz Hdefx Acnsr OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: KW, spring balancer type F2 with locking mechanism -Load: 98-176 N -Cable extension: 1.9 m Dkjdpjir E S Iofx Acnjr -Quantity: 2x spring balance available Price: per piece -Dimensions: 225/125/H340 mm -Weight: 10.3 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Dksdpfxjt Iw Huj Acnor Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. reactions or questions ? please with full name, company name and phone number. Dodpfjt Iwt Uex Acnokr

Condition: new, functionality: fully functional, Year of construction: 2026, RSS 600 series Mono Rotor Shredder new model 2026 18.5kw Screen size in consultation Motor cover, pusherbox guide strips, PLC controlled. Conveyor and/or discharge screw is optional available. suitable for various types of plastic/wood/or other material Delivery in consultation Dkjdpfx Acoirt H Asnsr Larger or smaller models also available. Intrested ?, reactions with your name, company name and telephone number.