Used Camu Decoiler And Recoiler For Coil Material, Reel For Sheet Metal Strip Coils, Sheet Metal Coil for sale (56,802)

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Crodpfx Answvv Rqsmof Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Codpfsif Sg Sox Anmerf Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: like new (used), functionality: fully functional, Sheet Metal Perforating Line – For Sale Complete sheet metal perforating line manufactured by Sacform, suitable for perforating sheet metal and coils up to 1,200 mm wide. The line includes: Decoiler Feeder Perforating press - 1,200 mm width Credpfx Aozix Atonmof 2 punching dies: Die 1: 3×300 (2 mm hole diameter) Die 2: 1×1,200 (3 mm hole diameter) Pull-through cutting table Recoiler

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke Cjdpfxohx R Eto Anmjrf - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Csdpfx Aoua Nngonmjrf Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm Codpfxei T Ir As Anmerf bundle width: max. 200 mm

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Credex Emdgopfx Anmef Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: good (used), functionality: fully functional, Year of construction: 2018, overall weight: 90 kg, Description: For sale: a support claw, sheet metal claw, support clamp, sheet metal gripper, material gripper. * Manufacturer: NORD-GREIF Load capacity: 2500 kg Gripping width: 250-500 mm Weight: 90 kg Year of manufacture: 2018 Type: Z 51 Serial number: 1151508 * IMPORTANT: For logistical reasons, we only sell within Europe. The buyer is responsible for collection, loading, and transport. * “The seller excludes any warranty for the purchased goods. The goods are sold in their current condition, without any guarantee of their suitability for a specific purpose or that they are free from defects. The buyer confirms that they have inspected the goods before purchase and are satisfied with their condition. The seller assumes no liability for damage caused by the use of the goods. Any claims by the buyer against the seller are excluded.” * Date: 08/04/2026 * Codjzrmg Eepfx Anmerf Price: €120 (negotiable) * Please do not hesitate to contact me if you have any questions or require further information.

Condition: good (used), Number of guide rollers: 5 Sheet width: 430 mm Sheet thickness: 1 mm Csdpsgvl U Rofx Anmsrf Top roller diameter: 2 top rollers - Ø 60 mm Bottom roller diameter: 3 bottom rollers - Ø 60 mm

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Crjdpfx Asxw Rcuonmof Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: electric, For sale: lightly used sheet metal rewinding machine SVM-100, designed for automatic rewinding of sheet metal from large coil rolls into smaller rolls of 25m2 (1250*20,000 mm). The machine was manufactured in 2024, has been used very little, is in excellent technical and visual condition, and is fully ready for operation. It is an excellent solution for companies that produce roofing materials or other sheet metal products supplied in rolls. The machine automatically: Crsdszibwgjpfx Anmof - Unwinds the sheet metal from the coil up to 1 ton. If you want to rewind from 2-5 ton coils, an automatic unwinding unit is required to feed the sheet metal. - Winds the sheet metal into a roll. - Cuts the sheet to a specified length. - Allows the roll to be wrapped with stretch film. - Applies protective film to the surface of the sheet metal. The machine is connected – it can be inspected and tested. Technical specifications: Manufacturer: Foldsolutions / UAB Pakservisas Model: SVM-100 Year of manufacture: 2024 Made in: Lithuania Operating parameters: Sheet metal width: 1230–1260 mm Sheet metal thickness: 0.4–0.6 mm Maximum roll length: 20 m Roll diameter: approx. 300 mm Equipment: Automatic sheet metal winding Sheet metal cutting to a specified length Automatic roll packing process with stretch film Option to use protective film on the sheet metal Integrated length measuring encoder Touchscreen control panel Manual and automatic operating modes Pneumatic cutting system Adjustable operating speeds Length calibration function for precise production Emergency stop system Technical data: Electrical power: 400 V / 50 Hz / 3 phases Power: 2.6 kW Required compressed air pressure: 0.65 MPa Air consumption: 0.3 m³/min Dimensions (L × W × H): 2555 × 1730 × 1800 mm Weight: approx. 600 kg Application: Ideally suited for roofing materials, facade, sheet metal products, sheet metal processing companies, and other manufacturers who require fast, accurate, and safe preparation of sheet metal rolls for transport or storage. If you have any further questions, we will be happy to answer them.

Condition: used, Unwinding reel, reversing reel GSW SCHWABE Type LHD 50/800 Special Double unwinding reel Manufacturer's No. 5775, Year of manufacture approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Support discs Ø 850 mm Guide rings Ø 850 Crjdpfshubgwox Anmef Center of reel shaft to reel base 980 mm - Reel can be manually rotated 180° with locking positions - Central spreading via rotary lever adjustment - Mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg Good condition

Year of construction: 2010, condition: used, METAL SHEET PROFILING LINE FOR TILE ROOF PANELS Reduced price due to urgent sale Scope of supply 1 Uncoiler 2 Front shear + coil guide table 3 Film applicator 4 Base parts of cassette type forming machine 5 Roll forming machine for roof tile for "COPPO" 6 Roll forming machine for rooftile for "ATIIKA" 7 Roll forming machine for rooftile for "T177.5" 8 Shearing (Cut-off) machine: Flying type 9 Drawing part 10 Auto stacker 11 Electric control panel Technical specifications - Manufacturer: IL Kwang (Korea) - Manufacturing: Year 2010 - Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) - Tensile strength: 250 ~ 320 MPA - Max. coil width: 1250 mm Codpfxsymbfys Anmjrf - Coil thickness: 0.35 – 0.8 mm - Max. coil weight: 15 ton - Outer coil diameter: Max. 1300 mm - Inner coil diameter: 508 mm - Line speed (length > 5 m): Max. 8 m/min - Speed control: Frequency control by inverter - Commercial voltage: 380 / 50 V/Hz 3 Phases - Surface (LxWxH): Approx. 30 x 8 x 5 m Brand of components - Motor: Siemens (ICE. type) - PLC + Inverter: Siemens 7 - Servo: Mitsubishi (with C.E ) - Touch screen: Pro-face (with C.E.) - Electric components: L.G (with C.E.) Commercial voltage: 380 / 50 V/Hz 3 Phases Line speed (length > 5 m): Max. 8 m/min Material: Pre-painted, galvanized steel sheet (ASTM A 526/ JIS G 3302 SGCC) Tensile strength: 250 ~ 320 MPA Max. coil width: 1250 mm Coil thickness: 0.35 – 0.8 mm Max. coil weight: 15 ton Outer coil diameter: Max. 1300 mm Motor: Siemens (ICE. type) PLC + Inverter: Siemens 7 Servo: Mitsubishi (with C.E ) Touch screen: Pro-face (with C.E.) Electric components: L.G (with C.E.) Speed control: Frequency control by inverter Inner coil diameter: 508 mm Surface (LxWxH): Approx. 30 x 8 x 5 m

Condition: good (used), TERMOZ LYON tour à repousse Crodpfjm Dtncsx Anmof

Condition: used, functionality: fully functional, Square table, 1m x 1m Crodpfx Aozqdcuenmsf Height 0.85m With brake – without drive Approximately 20 units available.

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm Cjdpfx Ajxtp Eyjnmjrf

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm Crjdpfx Ansi Hi Swomef coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: used, functionality: fully functional, coil weight: 3,000 kg, mandrel diameter: 508 mm, mandrel length: 620 mm, turntable diameter: 1,400 mm, Load capacity: 2 x 3000 kg Distance from floor to center of mandrel: 950 mm Outer diameter of stop: 1400 mm Mandrel length: 620 mm Mandrel nominal diameter: 508 mm Coil guide rings: on both sides Braking: pneumatic, brake disc/caliper Unwinding drive: electric, geared motor Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal with electrical documentation Cjdpfx Aey Smcionmerf Operated flawlessly in production up to the point of dismantling at the customer's plant. We can support you with the following during integration: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, functionality: fully functional, coil weight: 2,000 kg, mandrel diameter: 508 mm, mandrel length: 420 mm, turntable diameter: 1,350 mm, Load capacity: 2 x 2000 kg Distance from floor to center of mandrel: 950 mm Outer diameter of stop: 1350 mm Mandrel length: 420 mm Mandrel nominal diameter: 508 mm Coil guide rings: on both sides Braking system: pneumatic, brake disc/caliper Unwinding drive: electric, geared motor Mandrel expansion: threaded spindle with Allen key Locking of rotary bearing: foot pedal with electrical documentation Operated flawlessly in production at the customer's facility until decommissioning. We can support you with the following during integration: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation Cedpfxoy Sl Rxj Anmsrf

Condition: used, functionality: fully functional, degree of automation: manual, actuation type: manual, coil weight: 500 kg, mandrel diameter: 508 mm, mandrel length: 300 mm, turntable diameter: 1,200 mm, Load capacity: 2x 500 kg Floor to spindle center: 850 mm Outer stop diameter: 1200 mm Spindle length: 300 mm Spindle expansion range: 300-610 mm Coil limit rings: on both sides Braking: handwheel, band brake Spindle expansion: via handwheel, bevel gear set Rotary bearing lock: foot pedal Was operating flawlessly in customer production until disassembly. We can support you with integration through: Credjy Slu Dopfx Anmof - Planning - Mechanical refurbishment - Control system construction - Painting - Safety concepts - CE documentation

Condition: used, functionality: fully functional, actuation type: manual, coil weight: 500 kg, coil width: 320 mm, mandrel diameter: 508 mm, turntable diameter: 1,300 mm, Load capacity: 2x 500 kg Floor to spindle center: 1080 mm Outer diameter of stop: 1300 mm Maximum strip width: 320 mm Nominal spindle diameter: 508 mm Coil limiting rings: on both sides Braking: handwheel, band brake Spindle expansion: threaded spindle with socket wrench Locking of the turntable bearing: foot pedal Operated flawlessly in production until disassembly at the customer's facility. Cjdey Slrcspfx Anmjrf We can assist you with integration through: Planning Mechanical overhaul Control system engineering Painting Safety concept CE documentation

Condition: used, functionality: fully functional, Year of construction: 2002, coil weight: 1,500 kg, coil width: 425 mm, mandrel diameter: 508 mm, turntable diameter: 1,500 mm, Load capacity: 2x 1500 kg Floor to center of mandrel: 1090 mm Outer diameter of stop: 1500 mm Mandrel length: 425 mm Mandrel nominal diameter: 508 mm Coil limiting rings: both sides Braking: pneumatic, brake disc/caliper Mandrel expansion: threaded spindle with socket wrench Locking of rotary bearing: foot pedal Cjdpfx Anjy Slp Ujmjrf Operated flawlessly in customer’s production until dismantling. Control system not included. We can support you with integration through: Planning Mechanical overhauling Control system assembly Painting Safety concept CE documentation

Condition: excellent (used), functionality: fully functional, Manufacturer Julius, type AH 41 Inner coil diameter from 250 to 300 mm Max. width 295 mm With brake Codpfsziwxtox Anmsrf Good condition, ready for immediate use

Condition: new, functionality: fully functional, Decoiler for up to 150 kg coil weight, fixed rotation speed of 10 rpm. Codpfezfwidjx Anmsrf

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Csdpozfn Iqofx Anmjrf